LD, my advice would be to distance myself from the shady promoter. Associations like that can only hurt your own career.
My advice, for what it's worth!
My advice, for what it's worth!
Weekly Contest #57 Win a FREE Tank!!
- Thread starter RayN
- Start date
- th_trl_thread_readers 0
- Status
#1 for 08/26
But, I think I want him/her to be blocked. This is blatant trolling, IMO. But, then, what do I know? It isn't hurting me, I have no dog in the fight and I still can't understand why it bothers me. I noticed that this person has a boatload of posts for being so new. I think there are a lot of contest entries included.
Maybe I am grumpy? Ya think?!!!
Last edited:
3. 8/26 - Protank head rebuilds... I read the whole thread on this subject a couple of months ago, I can't find it anymore. 3mm silica will work, so will 2mm doubled up. I never tried it with Ekowool, but 2mm might work. Flavor wicks are not necessary after a rebuild. If you want 2 ohms or over, you'll probably want to use 32 gauge Kanthal. If I can find the thread later I'll be sure to post it. Here's a video, although he is by no means an expert (which he will admit)
#1
Congrats Steve on winning last week!
These tanks look cool, and I'm newish to vaping and would love to win one to expand my horizons
Congrats Steve on winning last week!
These tanks look cool, and I'm newish to vaping and would love to win one to expand my horizons
#2 for 08/26
Welcome Melynda! I am a bit of a newbie as well. I am learning a lot here and, better yet, I really trust the advice I receive from these folks. If they don't know, they say so. The contest is wonderful, but the people make it a place to visit, move in and even plant roses.
Welcome Melynda! I am a bit of a newbie as well. I am learning a lot here and, better yet, I really trust the advice I receive from these folks. If they don't know, they say so. The contest is wonderful, but the people make it a place to visit, move in and even plant roses.
#dos
Thats what I am leaning towards. He is such an ego driven vindictive ......., that i feel like he will do something to retaliate if i pull outta the show, i have seen him do this before... But its not good business to work with him or around him in any way. he brings almost nothing to the table however i am hesitant. creating bad blood in our small scene is never a good thing. i see him every weekend, and it creates tension. he needs to grow up and fix the errors of his ways. i no longer have his back. i wont slander him, nor will i support him.
he did this to himself, and i have given him plenty of chances to be legit.
i am at a point where i would rather throw a medium sized quality event everyother month and a Huge event 2-3 times a year and slow down all these shows that i work. doin 1-3 events a month has detracted the level of energy i usually like to put into one of my shows.
arhhhh........
Thats what I am leaning towards. He is such an ego driven vindictive ......., that i feel like he will do something to retaliate if i pull outta the show, i have seen him do this before... But its not good business to work with him or around him in any way. he brings almost nothing to the table however i am hesitant. creating bad blood in our small scene is never a good thing. i see him every weekend, and it creates tension. he needs to grow up and fix the errors of his ways. i no longer have his back. i wont slander him, nor will i support him.
he did this to himself, and i have given him plenty of chances to be legit.
i am at a point where i would rather throw a medium sized quality event everyother month and a Huge event 2-3 times a year and slow down all these shows that i work. doin 1-3 events a month has detracted the level of energy i usually like to put into one of my shows.
arhhhh........
I would recommend you ignore him in that case.
I do not have true moderator privileges and can't block someone from posting, so that is what ignore is best used for.
8/26 #2
I just received my first bottom coil clearomizers (Kanger T3 and EVOD)!!! I haven't tried the EVOD yet but LOOOOVE the T3!! No more top coils for me anymore!!
I just received my first bottom coil clearomizers (Kanger T3 and EVOD)!!! I haven't tried the EVOD yet but LOOOOVE the T3!! No more top coils for me anymore!!
08/25 Entry #3 . . .
Most of the technical conversations so far today . . .
Then again, it's nothing new, since most of the time when it comes to the more advanced "Stuff" about these things (even all the different batteries) I'm like . . .
So. . .
1: Okay had to bring this one back to the front. Good afternoon all.
#3
Just spoke to another promoter in town, an ally and great friend. He thinks i should pull from the event and not work with him. bad PR for my label and this town to continue to support this dude.
Shame, a lot of good and up-and-coming djs that i wanted to get some play at the next one.
i gotta stop worrying about it.
......... moving on
Met with Tish last night, handled a little co-op biz and got some EM (finally!!!) and some menthol! Along with some good advice, tips and conversation. I love how passionate Tish is about vaping, and is very knowledgeable.
Thanks for meeting with me so late in the day, always a pleasure!!
Just spoke to another promoter in town, an ally and great friend. He thinks i should pull from the event and not work with him. bad PR for my label and this town to continue to support this dude.
Shame, a lot of good and up-and-coming djs that i wanted to get some play at the next one.
i gotta stop worrying about it.
......... moving on
Met with Tish last night, handled a little co-op biz and got some EM (finally!!!) and some menthol! Along with some good advice, tips and conversation. I love how passionate Tish is about vaping, and is very knowledgeable.
Thanks for meeting with me so late in the day, always a pleasure!!
4
Well... first prototype is done. I learned acouple few things...
1) I really need a drill-press to keep the forstner bits straight, with a stage to lock down the work-piece
2) I need a 5/16" bit for the 510 connectors
3) " The Gripper" is a PITA to make a slot for...
4) I have No idea what to line the holes/slots with
5) I really need to use a router-table to get clean edge-profiles
6) I really have no idea what to line the holes/slots with...
Here's the first prototype
Here's the un-drilled plinth for the kitchen
Well... first prototype is done. I learned a
1) I really need a drill-press to keep the forstner bits straight, with a stage to lock down the work-piece
2) I need a 5/16" bit for the 510 connectors
3) " The Gripper" is a PITA to make a slot for...
4) I have No idea what to line the holes/slots with
5) I really need to use a router-table to get clean edge-profiles
6) I really have no idea what to line the holes/slots with...
Here's the first prototype
Here's the un-drilled plinth for the kitchen
Last edited:
4
Well... first prototype is done. I learned acouplefew things...
1) I really need a drill-press to keep the forstner bits straight, with a stage to lock down the work-piece
2) I need a 5/16" bit for the 510 connectors
3) " The Gripper" is a PITA to make a slot for...
4) I have No idea what to line the holes/slots with
5) I really need to use a router-table to get clean edge-profiles
6) I really have no idea what to line the holes/slots with...
Here's the first prototype
View attachment 245532
View attachment 245533
Here's the un-drilled plinth for the kitchen
View attachment 245535
2: Looks like it will work, and if my internet can stay up I might get to 5 today.
That's awesome JAC!!
My buddy who I helped get back into vaping made one last week also!
I think I'd like to make my own also. I have one for my 8 fav juices and 16 tanks but nothing for mods. I'd buy one but the ones I want never have a slot for my EA clone side button.
My buddy who I helped get back into vaping made one last week also!
I think I'd like to make my own also. I have one for my 8 fav juices and 16 tanks but nothing for mods. I'd buy one but the ones I want never have a slot for my EA clone side button.
4. 8/26 - I ran across this thing, check out the engraved symbols... Amazing Price Ehpro Hornet Tank / aga atomizer with High Quality, View Ehpro Hornet Tank, Ehpro Product Details from Shenzhen Ehpro Technology Co., Ltd. on Alibaba.com
It reminds me of a mishap at a Chinese food restaurant. A customer became very upset after seeing the symbol, not knowing anything of its ancient history. Some folks aren't aware that the Nazis stole an ancient symbol that once meant nothing but good things. Party poopers!
Swastika - Wikipedia, the free encyclopedia
It reminds me of a mishap at a Chinese food restaurant. A customer became very upset after seeing the symbol, not knowing anything of its ancient history. Some folks aren't aware that the Nazis stole an ancient symbol that once meant nothing but good things. Party poopers!
Swastika - Wikipedia, the free encyclopedia
I put a slot in for my EA, plan to make a few slotted holes, for similar, in the large, kitchen vape-organizer.
Found the flocking kit online to finish the interior...
Suddenly thinking: is there enough market for these? I can make a few jigs, for good precision work, if I had a market...
Decent drill-press... a few end-mills instead of forstner bits... ;-)
$500 investment and I could be ready to go...
Last edited:
I would never have thought to look that up and would never have known this bit of information. Sad that something so positive was so perverted.
- Status
Similar threads
