Weekly Contest #59 Win a FREE Tank!!
- Thread starter RayN
- Start date
- th_trl_thread_readers 0
- Status
though come to think of it a magneto has a 21mm OD as well, but then there goes my budget lol
oh or one of those kts storms... now where did i see those.
oh or one of those kts storms... now where did i see those.
Last edited:
3) Here's my innokin iTaste MVP 2 review. It's another winner from innokin, with the performance and battery life that made the original so popular, but with added features and physical improvements that keep it current. I think it's one of the best deals in vaping today. Full text review here.
4. 9/10- Those MVP2 mods look nice. If I wanted a box mod, I would jump on that. It's too bad the Tmax didn't work out so well, I like the idea of replaceable batteries and a flat top. I have a friend that is using Egos right now, and they're always falling over. I suppose he could just get a stand for it, but he's terrible about charging his mobile phone, making the MVP2 a nice choice. When he decides it's time for an upgrade, I'll recommend that. He's far from ready for 18650s and battery chargers.
4
Behold! The power of Noalox!
My Drawtube has been misbehaving badly. Giving very little vapor on fresh batteries. Blah blah blah.
Gave it a good acetone scrub down, and a good coating of Noalox and Ho. Lee. Cow!!! Its performance is BLOWING the doors off the Den of Vaping! It's like a whole new mod!
Noalox... The best $2.72 I've spent on vaping ever!
Behold! The power of Noalox!
My Drawtube has been misbehaving badly. Giving very little vapor on fresh batteries. Blah blah blah.
Gave it a good acetone scrub down, and a good coating of Noalox and Ho. Lee. Cow!!! Its performance is BLOWING the doors off the Den of Vaping! It's like a whole new mod!
Noalox... The best $2.72 I've spent on vaping ever!
#5
Thanks again!
I checked out the link (and ill bookmark it) however i am not sure how long the piece of wire i use to wrap a coil is. a little under an inch i the igo-l?
I was considering getting 30 gauge wire, for both single and dual coil set ups. should i only use the A-1 rated?
This would be my choice for a box mod, the vw makes it really appealing, and not having to use replaceable batteries is also a win.
gonna be a little bit before i jump on another mod. i just got, well, will on thursday methinks, a EA clone (very much looking fwd to this). I need to get a couple vapesafe's and up my RDA collection.
Still, i think the new mvp would be a great replacement for my everyday vamo
ohh, and where did you get it? say the hardware store, say it.
Thanks again!
I checked out the link (and ill bookmark it) however i am not sure how long the piece of wire i use to wrap a coil is. a little under an inch i the igo-l?
I was considering getting 30 gauge wire, for both single and dual coil set ups. should i only use the A-1 rated?
This would be my choice for a box mod, the vw makes it really appealing, and not having to use replaceable batteries is also a win.
gonna be a little bit before i jump on another mod. i just got, well, will on thursday methinks, a EA clone (very much looking fwd to this). I need to get a couple vapesafe's and up my RDA collection.
Still, i think the new mvp would be a great replacement for my everyday vamo
ohh, and where did you get it? say the hardware store, say it.
4
I just... erp...hmmm
It's September 10th and I... errrp! I ddon't feel so well...
It's September 10th and I just saw a $#&&%$@> Christmas commercial!...I think I just threw up in my mouth... a little bit...
Excuse Me while I go finish the job...
($@%# you K-Mart!!!)
I just... erp...hmmm
It's September 10th and I... errrp! I ddon't feel so well...
It's September 10th and I just saw a $#&&%$@> Christmas commercial!...I think I just threw up in my mouth... a little bit...
Excuse Me while I go finish the job...
($@%# you K-Mart!!!)
Last edited:
5
OK, the hardware store!
.
..
...
....
.....
Sorta. I got mine at Home Depot. .5 ounce tube for just under three bucks cash. It's in the electrical department.
Hit up home depot dot com and search Noalox. Three results should come up. Then you can see if it is in stock at your local store!
Well worth the money!
#5
ohh, and where did you get it? say the hardware store, say it.
OK, the hardware store!
.
..
...
....
.....
Sorta. I got mine at Home Depot. .5 ounce tube for just under three bucks cash. It's in the electrical department.
Hit up home depot dot com and search Noalox. Three results should come up. Then you can see if it is in stock at your local store!
Well worth the money!
ohh, and where did you get it? say the hardware store, say it.
Usually near the romex wire and the receptacles and switches. I just get a bit from work as the building we are renovating is having us install aluminum feeder cables for the apartments.
The website says it's (Noalox) for aluminum...
What should i use on brass? Stainless?
What should i use on brass? Stainless?
Jac, the Drawtube is full stainless.
I'm mostly ignorant on the matter, but from my ECF readings... It works fine in all metals. There is actually metal in the paste. Give it a shot.
I'm mostly ignorant on the matter, but from my ECF readings... It works fine in all metals. There is actually metal in the paste. Give it a shot.
5. 9/10- You can use Noalox on any metal, it's marketed for aluminum though. Even aluminum can oxidize, they made noalox specifically for that. Personally, I use No-Ox-Id A-Special. It's more expensive, but has a very good track record. I only bought a 7 gram tube of it, it should last years if it's just for PVs. You can get it on FleaBay for $4 shipped, or just get noalox, it's probably all the same for "our" needs.
@LD- check the ohms per inch chart, cut a piece of measured wire and see how many wraps it's going to take. After making a few, you'll get the idea.
@LD- check the ohms per inch chart, cut a piece of measured wire and see how many wraps it's going to take. After making a few, you'll get the idea.
It's a zinc-paste. It says it's not safe on All materials, but fails to mention which ones!
Thank you! They hppen to have it in stock at my HD!
Thanks schnarph...
I just read the page from your link... I'm going to look for it!
Thank you! They hppen to have it in stock at my HD!
Thanks schnarph...
I just read the page from your link... I'm going to look for it!
Last edited:
The "metal" particles in Noalox are zinc @ ~20%. It's not really there to conduct electricity, the purpose is to stop aluminum from oxidizing. Even on the data sheets for Noalox and No-ox-id, I can't find any info saying that it conducts electricity. It sure seems to help though. I've done voltage drop tests before and after application and it made it better.
I can't quote numbers (I mean, I could... But that's Schnraph's kingdom!)... But what I can quote is an immediate before and after experience.
Before Noalox... Puny little corner store disposable vapor. After Noalox, on the same battery and atomizing device, epic advanced mod plumes of white cloudy goodness.
For months I panned the stuff as a gimmick. How could it possibly make any difference. But now... Now I'm gonna give all my mech mods the once over.
Before Noalox... Puny little corner store disposable vapor. After Noalox, on the same battery and atomizing device, epic advanced mod plumes of white cloudy goodness.
For months I panned the stuff as a gimmick. How could it possibly make any difference. But now... Now I'm gonna give all my mech mods the once over.
Bonus! The stuff (supposedly) makes the treads smoother! Don't like the sound of dry threads... no no no...
So apply to the threads and all contacts, correct?
So apply to the threads and all contacts, correct?
Good Night All.
Keep firing those devices!!
Schnarph, does the No-Ox-Id A-Special lubricate the threads for a smoother action?
Keep firing those devices!!
Schnarph, does the No-Ox-Id A-Special lubricate the threads for a smoother action?
Last edited:
#1 Its getting quite late and I haven't even started posting in here until now. Hope I can get all five in today.
The guys at my local B&M are some of the greatest guys ever. Love those guys.
BBS. got to catch up on the thread....
The guys at my local B&M are some of the greatest guys ever. Love those guys.
BBS. got to catch up on the thread....
- Status
Similar threads
