Weekly Contest #61 Win a FREE Tank!!

[levisdaddy]

#1
TGIF [kinda] I have to work tomorrow at 8 as well [lame] and had a semi-rough morning already [tiring]
Vapemeet was fun last night.
I met the guy who ran the local fogger co-op. it was mildly awkward. As you may [but probably not] recall, i mentioned there being some serious tension between us a few years back. I was 'seeing' [you know what i'm implying] this girl [now his wife] and he wasn't very happy about it. We made amends last night, which was nice and genuine on both sides. I didnt know how it was gonna go, but was pleased with the result. We even discussed going into business together. His wife came, it was nice to see her after all this time. [a little strange, but pleasant]

#5
Has anyone else noticed USPS tracking website page has changed?
When did that happen?

i haven't looked in a couple days. unless it makes it more accurate, is it an improvement?

3- I have a few, might find the time to get out and do some flying today, have to see with the project I have going right now and my Dr's Appt this afternoon. Tomorrow night starts my work week >.< .
Here is my Youtube channel 1skydvejam - YouTube

I gotta check out your vids, at work i cant go on the TUBE so it will have to wait till i get homez

i havent played with the fogger yet. it was recommended i clean it first and remove the stock coil. had he not suggested this i would have loaded it right away.
did you clean yours first boardo? did you use the stock coil? have i shared with you how hirsute i have become?

 

[QueenVictoria]

2 9/17

I'm sorry to hear that. I should pay closer attention.

 

[liblue1]

I don't think the site is closed...just the store. You can still go there and prepare an order, it's just not going to be filled until after 10/3

good morning LD...

 

[levisdaddy]

#2

its true, i'm naughty by nature



&
good morning Blue!!!!

 

[levisdaddy]

__DNC__

My only disappointment last night is that i didnt leave the meet with any new juices
at the last meet i left with 4-5 bottles of deliciousness from various vendors. last night, none. Its my fault, i should have gone around more and met more people, i spent most of the meet at a table conversing with the same few folks.

 

[liblue1]

chat
I wish there were some vape meets here..I would like to go to at least 1..... There is a place not too far where they have tons of samples and some cool people in the shop, but it's small and with 4-10 people vaping it gets a little heady quick....unfortunately most of them are on the other forum.... along with their vendors....

 

[Interpim]

5

I went and checked out the site... I was able to browse
A vape meet sounds like fun... hopefully there will be one near me at some point when I have the time to attend

 

[DreamingButterfly81]

4. So my day has somewhat improved. I went to lunch and the cafe where I work had my favorite cookies warm out of the oven. Warm melty chocolate cookies makes everything a little better LOL.

I really wish we had vape meets here more too. I've still yet to attend one, it would be very cool too. Then again, it would probably be easier to have vape meets here if people actually vaped here! Just sayin, lol

 

[QueenVictoria]

3 9/27

Yeah, the store part is closed. That's what I meant. Everything was fine until I went to check out. It's OK, I'll gladly wait.

 

[boardopboy]

2

This day completely collapsed in on itself...

We use an online system, all housed within our corporate WAN, to disseminate work orders to the production department (ME!). Literally ALL the work I do through the day comes down on this system.

It crashed. HARD. it is 100% completely offline. Company wide. No work is coming in.

This is bad bad bad news!

I thought there was redundancy built into the system... but it seems not!

 

[boardopboy]

#1
i havent played with the fogger yet. it was recommended i clean it first and remove the stock coil. had he not suggested this i would have loaded it right away.
did you clean yours first boardo? did you use the stock coil? have i shared with you how hirsute i have become?

YES!

By all means clean that Fogger! Otherwise it will taste like you are vaping deet.

And toss that stock wick and coil straight in the trash!

I've had mine a few days now, and have messed with it just about every night now and still haven't got it dialed in quite right. But at least I have only broken one o-ring. My first build (cotton balls)leaked slightly. My second build (3mm Hollow EkoWool (Thanks Schnarph!)) dry hit and was an extremely tight draw. My third build (2mm silica doubled up) leaked so horribly I had a puddle of juice on my table in minutes. At that point I tore the whole thing apart (literally. It is in 7 different pieces. I even took the air flow assembly apart.) and haven't touched it since.

Tonight, I will put it all back together and try again with cotton yarn in various configurations.

I WILL BEAT THE FOGGER!

 

[levisdaddy]

#3

2

This day completely collapsed in on itself...

We use an online system, all housed within our corporate WAN, to disseminate work orders to the production department (ME!). Literally ALL the work I do through the day comes down on this system.

It crashed. HARD. it is 100% completely offline. Company wide. No work is coming in.

This is bad bad bad news!

I thought there was redundancy built into the system... but it seems not!

sounds like you should go to Chuck Cheese.
free day!
rubber band fight around the office.
toaster wars.
wet t-shirt contest.
truth or dare.
funny hats and Hawaiian shirt day.
flip lights on and off really fast and have a rave.
unload a bunch of office supplies covertly in your boss's car (blame the co-worker you secretly hate)
these are all good ideas, so i know you have thought of and possibly initiated.

i havent played with the fogger yet. it was recommended i clean it first and remove the stock coil. had he not suggested this i would have loaded it right away.
did you clean yours first boardo? did you use the stock coil? have i shared with you how hirsute i have become?

can you riddle me that?

edit to add: looks like you already beat me to it

 

[DreamingButterfly81]

5. LOL and here I am hoping that maybe I could get to vaping my prebuilt little Pheonix style RDAs tonight lol. I have to figure out how to use them though, I haven't cleaned the stuff yet but I checked the resistance and one is at 3.8 ohm the other is doing the 9.9 thing (checked on VAMO) so I gotta learn how to deal with that. I get to learn lots of fun stuff in the next few weeks, now that I actually *have* the RDA's I'm kinda excited to learn how to use them

 

[levisdaddy]

#4
A tad disconcerting that you are having trouble with it. am i doomed?
doomed?

how did you clean it? hot water and ISO? i do have a little shooter of vodka in my trunk. (why!?)
I only watched one video on it, the Australian(?) guy. i should check some more before i build. Silica, Eko (thanks S!) or cotton yarn (thanks T!)?
When you master it, you must share

YES!

By all means clean that Fogger! Otherwise it will taste like you are vaping deet.

And toss that stock wick and coil straight in the trash!

I've had mine a few days now, and have messed with it just about every night now and still haven't got it dialed in quite right. But at least I have only broken one o-ring. My first build (cotton balls)leaked slightly. My second build (3mm Hollow EkoWool (Thanks Schnarph!)) dry hit and was an extremely tight draw. My third build (2mm silica doubled up) leaked so horribly I had a puddle of juice on my table in minutes. At that point I tore the whole thing apart (literally. It is in 7 different pieces. I even took the air flow assembly apart.) and haven't touched it since.

Tonight, I will put it all back together and try again with cotton yarn in various configurations.

I WILL BEAT THE FOGGER!

 

[Uncle]

09/27 Entry #1 . . .

Good "MoringNight" VVV'ers . . .

Having COFFEE and

. . .

 

[liblue1]

I hope you all have a great day....I am off to the store to get somethings........

 

[Uncle]

09/27 Entry #2 . . .

I hope you all have a great day....I am off to the store to get somethings........

HEY - WAIT . . . Could Ya' pick me up a few thing while you are out . . . .

 

[Schnarph]

#2
I too am eagerly waiting for VVV to let me buy something. I still haven't spent my GC from winning the contest a couple of weeks ago. Poor Ray. That fellow has had way too much bad luck lately. Same goes for jpf. I wish them the best.

 

[boardopboy]

3

#4
how did you clean it? hot water and ISO? i do have a little shooter of vodka in my trunk. (why!?)
I only watched one video on it, the Australian(?) guy. i should check some more before i build. Silica, Eko (thanks S!) or cotton yarn (thanks T!)?
When you master it, you must share

Ran it under hot water for about 10 minutes. Tore it apart and put all the pieces in a strainer and put the strainer into a salad bowl and ran it under the hottest water my kitchen sink can muster for about 10 minutes. Run on sentence.

Nah.. yer not doomed. yer the smartest of us all... you let the other guys stumble through and get frustrated and then take their advice and win on the first go! You have the patience of a a grasshopper and you tend to be rewarded for it.

Patience of a grasshopper? I think I am mixing my megaphones.

Or something.

Huh?

 

[QueenVictoria]

4 9/27

No TGIF for me. For me it's a Monday.