What battery to Kick?

[93gc40]

So, if one were to build/buy a Mech Mod, that would be powering a kayfun or orchid tank with 1.0-2.0 ohm coil(s) and be regulated via a Kick2.

Which 18XXX batteries do you shoot for? 18350+K2, 18500/490+K2 or 18650+K2

Wouldn't 18650Battery and a Kick 2 be just a couple magnets short of, a 350 tube added to a 500 tube?

 

[Flt Simulation]

I just use an Efest 18500 button-top battery along with the Kick module mounted in the 18650 tube of my King II clone

Usually build a single 1.6 ohm coil and power it at 4.1v (10.5 watts) .... nice flavorful vape

 

[tj99959]

I just use an Efest 18500 button-top battery along with the Kick module mounted in the 18650 tube of my King II clone

Usually build a single 1.6 ohm coil and power it at 4.1v (10.5 watts) .... nice flavorful vape

I do about the same, only with a Nemesis.
I run a 1.25 ohm coil @ 9 watts, which equals 2.68a @ 3.35v
So an 8a 18500 is all the battery that is needed.

 

[Ed_C]

I use a AW 18490. It's the same length as a 18650 without a Kick