Ok I have a 155mm penstyle ecig that I got from besteciggy.com. Any one have any idea what connection it has 801, 901? What size the battery is (mahs)? What I can use with it as far as attys go if I get a connection convertor for it??
What connection??
- Thread starter wickedalibi
- Start date
- th_trl_thread_readers 0
-
- Tags
- provari
- Status
The website gives no info at all what it is. Thats never good. Its an expensive kit also. I dont know what connection it is but someone else might be able to give you an idea. There a chance its one of those ecigs thats not really compatible with anything. Its going to be a fairly low mah since its a slim ecig. If you figure out the connection, and buy attys or cartos for it make sure you get standard resitstance(around 3.0ohm). Those batteries cant handle low resistance attys/cartos(2.0ohm or lower), they could ruin the battery
From what I can see on their website, it would appear they are 801 threads.
The mah of the batteries is likely in the 200 range but that would be a WAG.
With an adapter you could use any standard resistance atty or carto, that is
about 2.4 ohm and above. The low resistance and dual coil cartos need a
more robust power source.
The mah of the batteries is likely in the 200 range but that would be a WAG.
With an adapter you could use any standard resistance atty or carto, that is
about 2.4 ohm and above. The low resistance and dual coil cartos need a
more robust power source.
my taste buds are giving me fits right now and nothing seems right. not fluxos, cartos, my big daddy tank /sr or dcs at any ohms or voltage, or direct dripping attys on my provari or my 5v box mod, or my chuck either for that matter. So I charged up this setup from a previous try at vaping and dam if it wasn't what I was after except for the draw (like sucking a golf ball through a cocktail straw). everything else is a 510 setup. think I am going to try the cart on an atty on my provari turned down.
Thank you both for the information
Thank you both for the information
If you just quit smoking then your tastebuds will def do some crazy things for alittle. Some people it will even take 4-6 weeks for your tastebuds to get completely back to normal. Theres normally a short period where you really cant taste anything at all. Doesnt matter what device or atty/carto your using. That normally stops tho after 4-7 days and your taste will come back
Ha!! well chit that didn't work maybe I need a 510 to a 801 connector. On a brighter note I think that irritated my mouth and throat enough to make my Frisco in my tank taste a bit better.
Drank all the juice outta the pickle jar earlier and that didn't help!!!
Drank all the juice outta the pickle jar earlier and that didn't help!!!
From the little picture it looks like an DSE 801 style
The atomizer piece is fatter than the battery right? And does the battery have recessed female threads?
These are the only common female battery threadings
510 (same threads as 306, same threads and reverse electrical polarity from l88b)
RN4081 (same threads as DSE103)
DSE801 (same threads as Joye 302 and BE112)
And when you buy an adapter the first number is battery
And I recommend you not buy mystery clones. There is one stupid Chinese clone company that makes look-alikes with threadings that outwardly appear the same but they don't connect with the real models. It's as if they cloned them by looking at a photo. And some are purposely that way and meant for rebranders who want their customers forced to buy parts from them alone. And there are some models that are just threadings nobody has ever seen.
The atomizer piece is fatter than the battery right? And does the battery have recessed female threads?
These are the only common female battery threadings
510 (same threads as 306, same threads and reverse electrical polarity from l88b)
RN4081 (same threads as DSE103)
DSE801 (same threads as Joye 302 and BE112)
And when you buy an adapter the first number is battery
And I recommend you not buy mystery clones. There is one stupid Chinese clone company that makes look-alikes with threadings that outwardly appear the same but they don't connect with the real models. It's as if they cloned them by looking at a photo. And some are purposely that way and meant for rebranders who want their customers forced to buy parts from them alone. And there are some models that are just threadings nobody has ever seen.
Last edited:
The atomizer is bigger than the battery, and the male threads are on the battery and the female on the atomizer. The opposite of anything else I own.
Oh and dormouse the next time I go to PA can I come over and pick your brain??? Maybe learn something by osmosis just by being in the same room as you??
Oh and dormouse the next time I go to PA can I come over and pick your brain??? Maybe learn something by osmosis just by being in the same room as you??
Last edited:
Weird. There is some other new model that supposedly has 801 threads but opposite gender. But it does not look like an 801 and supposedly comes with its own M/F 801 adapter (an adapter I have never seen elsewhere) but they removed their text that stated about the adapter (and don't sell more cartos for it either). (I think it was the 908 at wordupecig - and does not look what you have)
OK so you have male threads on the battery - the most popular male threadings are:
KR808D-1 (called 808 for adapters)
DSE901 - same as 808 except for airflow, often use the ame adapter
KR808D-2 aka E9 (not popular rebrander threading but LeCog.com has a couple of adapters)
401 (but this is a skinny weak ecig - about 8 or 8.5mm diameter as opposed to 9.2 or 9.4mm for the above models)
OK so you have male threads on the battery - the most popular male threadings are:
KR808D-1 (called 808 for adapters)
DSE901 - same as 808 except for airflow, often use the ame adapter
KR808D-2 aka E9 (not popular rebrander threading but LeCog.com has a couple of adapters)
401 (but this is a skinny weak ecig - about 8 or 8.5mm diameter as opposed to 9.2 or 9.4mm for the above models)
Last edited:
- Status
Similar threads
- Locked
