What Did You Change?

[madhero]

Ok. So I'm a little particular in making my mods work better for me, so I spend a lot of my free time modding and changing my stuff to suit my needs better.
So I'd like to see what others are doing to their stuffs as well. Let's share.
Here's just some of mine.


This is an orion v2.1. Apart from making it leak proof, I've also modded the negative post to be spring loaded like the positive post. Thus no more "screwing around" when I change a coil.


Next is a Gus tele. I've taken out the spring portion and replaced it with a GGTS positive post. Fits just nicely and thus no more springy connection.
PS: hey fudgeball, think this is what you need. It'll be better if u used brass contacts though.

That's all for now. Hope to see some from this community.
Cheers

 

[Angel_Eye]

Hero, mind sharing what you done modding after you mod your gus? Btw, the gus tele take away the positive spring. still work pretty well isn't it? The problem is the bottom switch?

 

[madhero]

Hero, mind sharing what you done modding after you mod your gus? Btw, the gus tele take away the positive spring. still work pretty well isn't it? The problem is the bottom switch?

Don't get the first part of your question but for the second part, yeah, if your Gus is a V2. The V1 had a flat connection point, so that had no issues unlike the V2.

 

[chris85e]

Angel_Eye. This is what i used for the bottom switch. 3x od 1cm id 0.6mm metal washer from neigbhour hardware shop. Just put on top of the firing pin.

Hero, mind sharing what you done modding after you mod your gus? Btw, the gus tele take away the positive spring. still work pretty well isn't it? The problem is the bottom switch?

Sent from my GT-I9300 using Xparent BlueTapatalk 2

 

[hakeiym]

Mine looks pretty untidy

 

[Angel_Eye]

Some question here, sometimes after i vape half tank. there's juice consolidating inside my top cap. Do you guys encounter this?

 

[Angel_Eye]

Thanks for the tips, but i take off the spring and put the battery neg facing up positive facing the switch. hit quite well.

Angel_Eye. This is what i used for the bottom switch. 3x od 1cm id 0.6mm metal washer from neigbhour hardware shop. Just put on top of the firing pin.

Sent from my GT-I9300 using Xparent BlueTapatalk 2

 

[shanks]

View attachment 183921
Some question here, sometimes after i vape half tank. there's juice consolidating inside my top cap. Do you guys encounter this?

Its normal...As the coil burn the juice that is wicked up...Thats why u got the piak piak sound. Experts please Correct me if i'm wrong as I'm still learning (was told it is normal)

 

[LaVsy]

those piak piak is actually quite hot.

but anyway i notice that piak piak too much oso not good, wasting the juice.
it was suppose to wick and burn evenly.

 

[shanks]

those piak piak is actually quite hot.

but anyway i notice that piak piak too much oso not good, wasting the juice.
it was suppose to wick and burn evenly.

Ohh is that it? No wonder my juice doesn't taste well. After i recoil last week, it doesn't have the piak piak sound liao. The sound now is like sizzz sizzz very softly. 1st time coil lol

 

[LaVsy]

sizzz sizzz sizzz best.
every refill i will always check my coil again and adjust if needed.

 

[madhero]

View attachment 183921
Some question here, sometimes after i vape half tank. there's juice consolidating inside my top cap. Do you guys encounter this?

Its definitely normal. Condensation happens, so nothing to worry about.

 

[eyespan]

Sometimes it piak piak and then tuk. I found that its the juice bursting into flames. Keep the Voltage lower then, or clean your coil.

 

[Domtine]

I gave my GG a custom fuse after searching high and low for the fuse upgrade.

 

[invisibl3]

modded my vivi tank to make it similar to a genesis to get a smoother vape...

 

[Aizerson]

modded my vivi tank to make it similar to a genesis to get a smoother vape...

picture... hahaha..

 

[Domtine]

Somehow this has become a NPNT thread....

 

[Angel_Eye]

Hmm, so even i make the setup "non leaking" but the condensation still make it "leaking"?

Is there anything i can do about this?

Its definitely normal. Condensation happens, so nothing to worry about.

 

[chris85e]

u can drill a hole add a tubing to drain off the condensate.

Hmm, so even i make the setup "non leaking" but the condensation still make it "leaking"?
View attachment 184333
Is there anything i can do about this?

 

[Angel_Eye]

u can drill a hole add a tubing to drain off the condensate.

drill a hole at where?