what do i need?
- Thread starter learningtoquit
- Start date
- th_trl_thread_readers 0
- Status
How about giving a link to that J-tube? If you mean to say a J-tank, then what you do is first fill the carto that you need with it, then put it in and fill the tank. There should be demos on utube. I'd reccommend a 3.0 or higher carto/atty.
Last edited:
If you mean a J-Tank, then you will need some cartomizers and a drip tip. Since you're getting the Provari, get the 3.0 ohm Boge cartos and start out at about 5V. You will have to first fill (prime) a new carto with juice, then fill the tank.
You may also want to get some atomizers for dripping. They come in handy when tasting juices. You don't want to fill a cartomizer with juice you may not like. As far as juices, get several different kind in small bottles until you find the juice(s) you like.
Good Luck...
You may also want to get some atomizers for dripping. They come in handy when tasting juices. You don't want to fill a cartomizer with juice you may not like. As far as juices, get several different kind in small bottles until you find the juice(s) you like.
Good Luck...
Can someone recommend a really good tank and 3 ohm cartos for me to go with my provari?
The Mom and Pop Vapor tank is the best tank out there as far as I am concerned. Those things don't slide or budge no matter what you do. Saved myself a lot of juice using their tank over others.
I think im set, ordered 3 tanks and 3 extra cartos and refill kit from mom and pops, 60 bucks worth of juice from highbrow, the provari in chrome with extension, 2 batts and charger. Is that everything i need? do i need a mouthpiece?
yes get your self some drip tips if you are running a tank.
....., now i have to place an order for just drip tips! Will any drip tips work?
Any that says they are for 510 will fit...good thing is they are cheap...many places have them for $2 or so.
Sent from my Nexus S using Tapatalk
Sent from my Nexus S using Tapatalk
Your setup is sound? Just need a dermal or punch for your cartos.
As for tips the are not made equally. I have a perfect one but I get them locally and don't have a link for it. You want one that fits perfectly that is not to loose or tight.
As for tips the are not made equally. I have a perfect one but I get them locally and don't have a link for it. You want one that fits perfectly that is not to loose or tight.
If you ordered the assembled tanks from Mom & Pops as Posted by r77r7r, they come with drip tips (mouthpieces) so you should be good to go.
Best of luck, & Happy Vaping!
Im not sure i understand, i thought my unit adjusts by voltage but that chart is in watts
Does it mean that with my 3ohm cartos i can run between 3.5 and 5 volts?
Does it mean that with my 3ohm cartos i can run between 3.5 and 5 volts?
Last edited:
The warmth of the vape is related to the power output of the carto in watts. The more power (watts) you generate, the warmer the vape. Once you find your sweet spot, you can use the chart to find the voltage you should run your cartos to get that warmth (power) you like. So if you like the 3ohm cartos at 5V (8.33W) you could run a 2ohm carto at about 4V to get the same warmth from it.
Like wrecks said, if you are getting a tank then don't forget a tool to punch or cut the cartos. a Dremel will work if you want to cut them, or for an easy punch you can find a "saddle valve" from your local hardware store cheaply.
You can get pre-punched cartos from mom and pops Cartomizer Prepunched - Mom and Pop Vapor Shop
Yes...that's exactly what it means. The chart will help you out as far is finding your safe zone for what ever size ohm carto/attie you put on your Provari. If you ever get an E-1 error message on your Provari chances are its because the voltage setting will be out of the safe zone in the chart.
If you end up like me and have 1.5-3.0 cartos and atties and your not sure which one you have you can check the ohm reading on the Provari and then use the chart to see what your safe zone is for that carto/atty.
Wow! Starting with a Provari. That's dedication.
It took me months to get to the point of getting one. I wasn't even sure vaping would work, for me. So I started with a $40 Riva kit. Tried ohter things too before deciding to put down that much money for one PV.
You might want to look into backups, something not so top of the line, for emergencies.
But my hat's off top you for getting the Provari. Not much else comes close in quality.
It took me months to get to the point of getting one. I wasn't even sure vaping would work, for me. So I started with a $40 Riva kit. Tried ohter things too before deciding to put down that much money for one PV.
You might want to look into backups, something not so top of the line, for emergencies.
But my hat's off top you for getting the Provari. Not much else comes close in quality.
You can also get prepunched here for a much better price SMOKTech 510 Dual Coil Tank Cartomizer - 5 Pack
I use the 2.0 ohm with my Buzz Pro but they do have the 2.5 ohm if you prefer.
PS. You may want more than 3 cartos on hand. Especially to start with when you are just learning to fill and use them.
I use the 2.0 ohm with my Buzz Pro but they do have the 2.5 ohm if you prefer.
PS. You may want more than 3 cartos on hand. Especially to start with when you are just learning to fill and use them.
- Status
Similar threads
