It is supposed to be a squonking atomizer with plastic bottle built into the atomizer.
No need to have bottle in your mod----and what incredible is that the thing cost 12.00 !!!
What do you think of this Squonking Atomizer
- Thread starter thetrucker
- Start date
- th_trl_thread_readers 0
- Status
It is supposed to be a squonking atomizer with plastic bottle built into the atomizer.
No need to have bottle in your mod----and what incredible is that the thing cost 12.00 !!!
fasttech also carries it.
Look at the discussion here: $12.12 Fountain V2 Styled RTA Rebuildable Tank Atomizer - FastTech
Look at the discussion here: $12.12 Fountain V2 Styled RTA Rebuildable Tank Atomizer - FastTech
I was wondering Is this going to be a ground Breaker in the Squonking Community -----or just another GIMMICK.........
It would be a great setup to go with the ignition or another side by side like the kato or the suet for someone wanting to try the whole squonk thing but it won't be bought by Already converted squonkers
Sent from my Nexus 5 using Tapatalk
@vapero -----------------Thanks for your thoughts-----I was concerned that this atomizer would be a little long for most would be squonkers.
If the atomizer is too long people will not buy it ---as this Smokless Owl atomizer that came with my squonker---got a lot of bad reviews from people who did not like
the length...........
If the atomizer is too long people will not buy it ---as this Smokless Owl atomizer that came with my squonker---got a lot of bad reviews from people who did not like
the length...........
@vapero -----There seems to be a big interest in this squonking READY----model called The Velocity-------just wondered if you had this model or was interested
and what you thought about the Velocity.......
and what you thought about the Velocity.......
I don't think there's much interest in the current squonking community. There's no need, because those of us who are squonkers are using devices, like Reos and such, where the juice reservoir bottle is inside the mod. There may be some interest with those who have interest in a cheap way to try squonking for the first time.
very interesting.
I have the terminator squonker and this looks like its made by the same people that made the rda for it; one big drawback is the non-510 compatible drip tip; all they had to do was size their own drip tip hole so you could fit your regular drip tip in it if you wanted.
Another issue is the black plastic ring below the drip tip; it's unnecessary; it offer heat insulation but it's like having a proprietary part; if it gets bent out of shape you're dead in the water; I rather use my standard 510 drip tip insulators.
the airflow could probably do with some channeling down the side ;
on the other hand, depending on the size of the topcap, if one has a bunch of rda's there's a good chance some other topcap from some other rda would fit over the O-rings; maybe my manta topcap would fit over it
(and I am scratching my head wondering what is that hole in the bottom.. other picture does not show the hole coming out the other side, so it's not a fill hole)
for $12 it's worth a shot definitely.
and it's a THUMBS UP idea - putting the squonk where it belongs.
More like this means more squonking rda's will work on whichever mod you choose.
I have the terminator squonker and this looks like its made by the same people that made the rda for it; one big drawback is the non-510 compatible drip tip; all they had to do was size their own drip tip hole so you could fit your regular drip tip in it if you wanted.
Another issue is the black plastic ring below the drip tip; it's unnecessary; it offer heat insulation but it's like having a proprietary part; if it gets bent out of shape you're dead in the water; I rather use my standard 510 drip tip insulators.
the airflow could probably do with some channeling down the side ;
on the other hand, depending on the size of the topcap, if one has a bunch of rda's there's a good chance some other topcap from some other rda would fit over the O-rings; maybe my manta topcap would fit over it
(and I am scratching my head wondering what is that hole in the bottom.. other picture does not show the hole coming out the other side, so it's not a fill hole)
for $12 it's worth a shot definitely.
and it's a THUMBS UP idea - putting the squonk where it belongs.
More like this means more squonking rda's will work on whichever mod you choose.
I read the reviews on the fastech site and the biggest major PROBLEM with this thing seems to be the Wolf Engraved on the side of it----hahahahahahahahah
Can't believe the new generation of people consider this a major selling point!!!!!!
Can't believe the new generation of people consider this a major selling point!!!!!!
I think for 12.00 it mite be fun to play with at least............but will not make dedicated squonkers obsolete...........hahahahah
There's a whole thread about the Fountain v2 in the Hardware/Tanks section, and those that have already got theirs are generally saying it's got good build quality and works well.
For $12 it's a no brainer for me.
For $12 it's a no brainer for me.
@Caterpiller ---------which company did you order yours from---focalsig----or-----fastech...
I haven't placed my order yet, but I'll be ordering from FastTech as I have store credit with them.
Agree. On bottom feeding mod your hand is already in right place to squonk
with this, you have to reach up to the atty to squeeze it? Makes no sense to me.
There WAS a squonking atomizer that already came out about 2 years ago, not rebuildable RDA type though since this was before rdas.
In a regular bottom feeder, stuff like the bottle would be easy to replace. If yuou get a split in this one you are showing, seems like it would be a real pain to replace?
Also, since it squonks, then you are limited to a non-glass / non metal juice receptacle, right?
Well, it does allow you the ability to do regulated squonking without the worry of getting juice on your chip (maybe. Not sure how leak proof it is). Maybe I should get one for the heck of it.
Any mod becomes a squonker?
Any mod becomes a squonker?
@Racehorse -----------yes you have to have a plastic bottle no matter what---
This will probably be just another gimmick thing ------- from the other thread the ones who bought it are really happy it sounds....
This will probably be just another gimmick thing ------- from the other thread the ones who bought it are really happy it sounds....
@roxynoodle -----thanks---It never occurred to me that this lets you do regulated squonking.......as I was thinking only of the squonking action of the atomizer itself.
This would be something to think about as My Smokless owl squonker only lets me use an 18650 battery and no higher power is available.
I have wanted to try the squonking at higher power thought it would be handy at times.
Great Selling point for this device..........
This would be something to think about as My Smokless owl squonker only lets me use an 18650 battery and no higher power is available.
I have wanted to try the squonking at higher power thought it would be handy at times.
Great Selling point for this device..........
- Status
Similar threads
- Locked
