What fitting do you prefer?

[Gracchus Grey]

801? 510? 306?

Frankly, I don't know what the difference is between the lot of them. What do people like on their infinity/buzz? Why?

I'm using a 510 atomizer at the moment... But adapters are cheap and tempting

 

[El Dee]

The 306 and 510 are the same....different atties, same connection...

I've got all the top caps for the Buzz...Probably my favorite and most versatile would be the 510..

 

[markfm]

I have the 901/808 on my infinity, like it. Adapters from it to anything are readily available (just like adapters from 510 to other things). The threading just feels more solid than my 510 gear (personal preference).

 

[Caddyman]

i prefer the 510/306 myself.

 

[Bluzeman]

I've never used anything except 510. Is there a difference in flavor, or hit with different types? If so, when I get my Infinity, I might have to get some adapters and experiment.

 

[Bovinia]

I've never used anything except 510. Is there a difference in flavor, or hit with different types? If so, when I get my Infinity, I might have to get some adapters and experiment.

Bluze, you'll get as many answers to that question as you would if you were asking what everyone's favorite flavor is I'd suggest you start out with what you already know and like in atties or cartos as long as it's not LR. If you are used to a 3.7v device, then the Infinity will hit you like a Peter-built truck (paying homage to Poppa D)!

 

[Bluzeman]

OK, thanks Boviina! I've read about other atomizers, and didn't know if it was just the fitting, or if some were different. As everything I have right now is 510, that's what I'll go with for now!

 

[BuzzKill]

FYI the 901 has adapters to EVERYTHING ! and they are readily available . My 2 cents

 

[Bovinia]

Both my Buzz and Infinity are 510 native and I use plain old 3.x ohm boge cartos. I'm a firm believer in "if it ain't broke, don't fix it" so I have been ordering these same cartos for 6 months at least and love them. Some folks prefer atties, or the gold threaded SLB gear. Adapters are cheap so if I decide to go to an 808, no problem

I've kinda half ... kept up with the clearomisers, tanks, etc. and they all sound too unpredictable to me...I'm cheap LOL

And what Mike said above

 

[BuzzKill]

Whatever works for you , thats what I say Bov !

 

[5cardstud]

I like the 901 because it lets me run the 808 and 901 which I use the most. I got a 510 on my Infinity but I wished I would have went with the 901 like my Buzz has.

 

[Gracchus Grey]

I plan on sticking to 510, mostly because I just purchased two drip tips from cherryvapes

 

[Kobudo]

I like the 510 connector lately. works great with 808/901 adapters and you can get an adapter to use whatever you want. I find they're easier to keep clean than the native 808/901 connectors too. All my old 808 connectors have black gunk between the pos and ground sides that I can't seem to get rid of.

 

[cappadoc]

801 connector with BE112 atty's and Ikenvapes 801 fusion cartos FTW!

 

[Cari]

I'm definitely leaning toward the 901 when I order my Infinity Pro. Saving up and can't wait!

 

[BuzzKill]

I plan on sticking to 510, mostly because I just purchased two drip tips from cherryvapes

The drip tips will work on a 901 / 808 also Dave

 

[5cardstud]

Plus the 901 is easier to keep clean and mess with if you have to beings it hase a male thread pattern. The 510 you have to reach down into the recess to clean it and to adjust the center post whereas a 901 is fully exposed. I've read more problems with 510 center posts than with the 901. I have less problems with my 901 connection too than my 510.

 

[catcat]

Where is the best place to get the stealth/thin adapters? I got the 901 connection to my infinity. I also got the 901 to 808 and 901 to 510 adapters from Mike. I'm looking for a 901 to a 801. I have some 801 stuff laying around here from my very first 801/classic pen style ecig that got me vaping in the first place. I want to use up what I already have around here.

 

[Rosco]

I doubt there is such a thing as a "stealth/thin" adapter for 901-801. You'll probably have to use the 2 adapters you have now. I have seen such an adapter, but it looks about the size of your 2 adapters together.

 

[5cardstud]

http://www.goodprophets.com/ has adapters for $.99, http://www.avidvaper.com has some I think and you might try these people although I haven't looked but they have some pretty hard to find adapters. The Better Way To Smoke - Mod Parts

The 901to801 I got from goodprophets is about a quarter inch thick or less.