What is your fav' mod + RDA/RTA combo like?

[stanley_untitled]

Replaced my old Cloupor GT and Subtank Mini with Evic vtc mini + Origen Genesis last week. At 1.15ohm with a 3mm single 26ga coil, the flavor is superb! Genny's my daily driver for now . What is your combo and build like?

 

[HauntedMyst]

Super T Precise + or Titanide Themis with a Prometey atomizer

 

[aet11]

 

[Baditude]

My primary setup is an AltSmoke Silver Bullet mechanical mod with a Patriot rda with a dual coil 0.6 ohm (3.0 mm diameter) configuration.

My backup setup is a Provari with a kayfun Lite Plus RTA with a single coil 1.5 ohm.

 

[evan le'garde]

Provari 2.5 + authentic Kayfun V4


Provari 2.5 + Russain 91%




And my right hand is.......well, like a mirror image of this one.

It's awsome !.

 

[Paul lamb]

Snow wolf and aromamiser with the velocity deck at 0.9 22g kanthal boooooom

 

[Two_Bears]

Replaced my old Cloupor GT and Subtank Mini with Evic vtc mini + Origen Genesis last week. At 1.15ohm with a 3mm single 26ga coil, the flavor is superb! Genny's my daily driver for now . What is your combo and build like?

My favorite mod is the Eleaf istick60tc

My favorite RTA is the Goblin Mini, Orchid, and Kayfun Nano in that order.

Since my Kayfun Nano does not have post holes; with my injury to my left hand trapping those leads under screw heads can be a real PITA. sometimes I can trap the leads the first try. Other times it can take 10 attempts before the ÷°€√ing leads are trapped securely enough to adjust the coil.

 

[Paul lamb]

You need a vape buddy bro just for building lol​

 

[Paul lamb]

My favorite mod is the Eleaf istick60tc

My favorite RTA is the Goblin Mini, Orchid, and Kayfun Nano in that order.

Since my Kayfun Nano does not have post holes; with my injury to my left hand trapping those leads under screw heads can be a real PITA. sometimes I can trap the leads the first try. Other times it can take 10 attempts before the ÷°€√ing leads are trapped securely enough to adjust the coil.

You need a vape buddy bro just for building lol​

 

[Two_Bears]

Thanks. If I stop using that hand it will become less than useless.

As long as I can I intend to wrap my own coils. Duprodens Contracture has curled up the middle, ring and little fingers of my left hand. I refuse to surrender the use of my left thumb and index finger ubtik I have to.

DC is generally caused by an injury to the hand. I have had injuries to both hands in spades. Being a martial artist for 50 years. And car accidents and others but what set DC off was breaking both bones about 2 inches behind my left wrist (8 weeks of limited activity, then a dog taking off and the leash getting caught under a ring. To say that hurt is an understatement.

 

[suprtrkr]

I use an SX Mini M in the car, topped with either a Lemo2 or a Fogger V6. At home I'm usually a dripper. My favorite RDAs are a Council of Vapor Aris Pro, Wotofo Sapor, Wotofo Mini Freakshow, probably in that order. I also use a Dark Horse, and my woman has stolen my old Plume Veil and Patriot. I just bought her a Plume Veil so I can get mine back. I normally use mech mods at home and I switch them out when the mood strikes. Right now, the ones currently rigged for vaping are a MMV Poldiac, a MMV Nanos, and a Wotofo Phantom. Last week I had my old Smok Magneto V1, a Nemesis and a Council of Vapor Kindred in the rotation. For cloud chucking, I usually crank up the old 200 W Snow Wolf topped with a Fishbone.

 

[ElectriSean]

My favorite mod is a Sigelei 150W TC. Favorite RTA is the Lemo 2, 0.5 ohms at 35W. Favorite RDA is the Dark Horse, 0.33 ohms dual @ 55W. I am also really digging the Uwell Crown, which I finally got on Friday Been running that at 60J and 426 F.

 

[roxynoodle]

At the moment, an Aromamizer RDTA with either a Sigelei 100W or istick 100W.

 

[TreoTahoe]

Both are my all day setups

 

[stanley_untitled]

My primary setup is an AltSmoke Silver Bullet mechanical mod with a Patriot RDA with a dual coil 0.6 ohm (3.0 mm diameter) configuration.

My backup setup is a Provari with a Kayfun Lite Plus RTA with a single coil 1.5 ohm.

I'm still considering which to get...kayfun lite plus or taifun gt II. Review on kayfun lite plus please?

 

[stanley_untitled]

Provari 2.5 + authentic Kayfun V4


Provari 2.5 + Russain 91%




And my right hand is.......well, like a mirror image of this one.

It's awsome !.

Is that a LED in your mod? Looks pretty cool!

 

[stanley_untitled]

You need a vape buddy bro just for building lol​

 

[bsidb]

Dual coil, 26g,5/4 wrap , .4ohm, Velocity Mini BF , on REO Grand LP, DIY Menthol/Peppermint makes for a happy vapor Vaper

 

[Two_Bears]

I'm still considering which to get...kayfun lite plus or taifun gt II. Review on kayfun lite plus please?

Kayfun Lite is a good RTA.

Good flavor, good vapor production. Extremely easy to coil and wick

But it has some limiting factord where many vapers are concerned.

1. Fill port on the bottom.
2. Single coil only
3. MTL only. Doing a lung hit is impossible.
4. Some have reported problems getting the Kayfun to work in Temperature Control.

I have used a lot of tanks and RTAs including the Bellus, Taifun, Lemo2, Billow V2 and more. My go to RTAs are in the order of preference.

Goblin Mini, Orchid, and Kayfun Nano.

Goblin single coil .78 ohms 26 gauge Kanthal with silicone plug

Orchid single coil .94 ohm single coil with cotton packed in the bottom of the juice wells.

Kayfun Nano .88 ohm 28 gauge Kanthal

PBussardo on YouTube mentioned he had his Kayfun finally working in TC. I have the world's worst WI-FI so I am unable to keep up on my YT watching since it turned cold. The only place in the RV park to get a decent signal part of the time is the laundry room that has no heat.

If you like big air with lung hits consider Monster base instead of KFL+.

 

[evan le'garde]

Is that a LED in your mod? Looks pretty cool!

It's funny !, at the time i wanted a Provari i was set on polished stainless steel with green led and display. I couldn't find one in stock anywhere in the UK. Eventually i decided i would get one imported from Provape in Washington USA. Took a couple of weeks, it got held up at customs, but worth the wait. Love the green led !.