What's the next mod for me?

Status
Not open for further replies.

KurrptSenate

Vaping Master
ECF Veteran
Verified Member
Oct 9, 2013
3,091
4,381
PA
Yea, I just gave a brief history that led to the progression of a 30 watt mod. Most of the time I'm not near 30 watts, but appreciate the regulated vape like the provari. If I never became interested in the dual coil Aqua I wouldn't have the need for a high wattage mod. I will say I enjoy drippers quite a lot at 30 watts. The big clouds weren't really a determining factor so much as the flavor bonus was.

I think if your interests evolved over time to something that could benefit from a device like that its worth the investment. I would say its predominantly for more advanced users. Not for everyone.
 

Purplepeeps

Ultra Member
ECF Veteran
Verified Member
Mar 10, 2014
1,144
1,378
Syracuse, NY
If you are looking or a new mod. How about trying something unique and classy like... Hand-Crafted ePipes, custom made personal vaping devices from ePipeMods.com ...more than just an eCig

You could try an e-pipe and feel like a sir :D


Sent from my iPhone using Tapatalk


I would love a pipe mod. In fact, I just signed up for indoorsmokers Kamry pipe giveaway! It comes in (pink) too!


I was up really late last night and was looking around at mods. Something caught my eye but now I can't find it:(

It's Russian, assembled in Germany?
 
Last edited:

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
hey peeps. It sounds like you have both more budget and more experience than I do, but I've decided that my next step, into the replaceable-battery mods, will be the Sigelei Zmax v3 ("flat" top); it's got the vv/vw, and it will take any size battery you throw at it, 18350, 18500, 18650. I like that versatility. It's also only $40 at FT, and the long shipping wait is cool, since I already have these 2 vv3's. since you already have the right kind of batteries, it would be a cheap buy for you; I figure with the mod itself, 2 of each of the sizes of batts, and a charger, I can probably get into it for right around $100, which isn't bad for this kind of mod and all the trimmings it needs. In the thread about this one, there are many stories of its toughness, it takes a lickin and keeps on... vapin? :D Anyway this might be something to look at, though if you've got a Provari, I'm not really sure why you would, except for the vw maybe.

Andria
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
Thank you Andria!

The SIGELEI is on the list!


:D I'm really looking forward to putting a big whopper of a 25mm XL IBTanked on it... this thing will get me thru those whole-afternnon-into-the-evening trips to my folks'; when I took the vv3 I just left it on passthru, which just provokes *more* questions about the whole vaping thing... ;)

Andria
 

beckdg

ECF Guru
ECF Veteran
Verified Member
Oct 1, 2013
11,018
35,706
TN
I was up really late last night and was looking around at mods. Something caught my eye but now I can't find it:(

It's Russian, assembled in Germany?

:D

i was just going to say this...



seems to fit your needs and will be right at home next to your prothingy when considering quality. russian Nivel chip, german SvoeMesto build.

it's the only "produced" mod i've seen that has had any believable reviews that suggest it's on par quality wise with the provari. also, mamu used the nivel chip a lot and seemed to like it. she was/is a legend in her own time and only used the best.

though, once you get a little more comfortable with the idea of moving forward, i would certainly agree with those suggesting a Reo. maybe a VV model used with a carto at first until you're comfortable with the idea of building coils. it's really an outstanding vape on a quality product that's built to be around for a long while... at least my grand will definitely be very long in the tooth before i have to worry about it not working. it's very solid and vapes like a dream.
 
Last edited:

2naphish

Ultra Member
ECF Veteran
Verified Member
Dec 24, 2013
1,254
997
the boro, Tennessee
Hello! Had to pop in. I've been vaping for years now and I've spent enough time here on e-cigarette-forum to have earned a masters and PHD in vapology, too bad that isn't a thing yet. :p I'm with Baditude that you should definitely at least begin looking at the REO mod.

I have owned everything out there. I've owned and used genesis style mechanicals. I own and used a Provari for the majority of my years spent vaping. I have several mechanicals. Have a pipe style rig. Ego batteries. All I can tell you is that spending time here on ECF equates to you wanting, and acquiring, a lot of vape devices. You see things, and you wind up feeling you should get them for yourself.

I started researching vaping right around the time it became popular, around 7-8 years ago now. The ONLY things on the market for vaping were cigarette styled batteries and pipe styled batteries. I started on an all white 510 kit myself. I settled on the Provari as my main PV for the last 2 years or so. Loved the Provari more than everything else combined. Tried Genesis devices on it.. Though they were good, they took too long to rewick and coil for me. Tried clearos. They're great, but I didn't like buying more when I ran out. (I couldn't, I've been unemployed or self employed on a tiny income for the majority of the time I've been vaping...) Finally, I tried rebuildable dripping atomizers. Got my hands on a couple and a big spool of kanthal, some cotton yarn from Walmart.

I haven't looked back.

Dripping is where this vaping thing comes together for me. I can control how much juice I'm using per vape session, per hit. I enjoy rebuilding my own dripping atomizers and I love knowing I'll never run out of what I need to vape. My last clearo will never break. If something goes wrong, I can rebuild a RDA in 5 minutes.

I bought a Reo years ago, but it was a Reo Mini, it used 14500 batteries. I used it at home a bit, sure, but I could only take it out for short 1-2 hour trips to the store. I only had a few batteries for it and I could only vape it for a few hours. I sold that Mini, and I immediately bought a Reo Grand with the money I had received. Now... I literally haven't used my Provari in almost 2 months. All I use is nice, solid mechanicals and my Reo, with rebuildable dripping atomizers, my "A7s" have never failed me. In all honesty, I would literally be tempted to trade 90% of my collection for 1 more Reo Grand.

Do not get me wrong, Variable Voltage is great. You can up the voltage for various needs, down it for different needs. But vaping strait from a battery, with a LOW resistance, cannot be beat. Once you understand mechanical vaping and low resistance rebuilding, you've graduated. There is no need to go back. There is no need to use any regulated mod. You can "regulate" each hit with the time you spend pushing the button down. The Reo Grand, holds 6ml of juice on-board. Which means I can "drip" without having to take out the bottle every time the coil dries up. I just squonk the bottle and my Reo is wet and ready. It's a sturdy device and you can use a multitude of bottom fed RDAs atop it.

Trust me, if you have values in line with the value's and expectations I've listed above... & If you trust the experience of someone who's been vaping since the beginning, then you will at least consider the Reo line of mods.

well there we go..now i have to start looking at Reo's :D

although not at it as long as you i have went through my share(and then some) of vape equipment. hit on the rda's and some nice (not clones) mechanicals. can't imagine vaping getting better for me but i guess if i make any maove it will have to be the trying of the whole 'squonk" thing...good post,listen up folks.
 

Purplepeeps

Ultra Member
ECF Veteran
Verified Member
Mar 10, 2014
1,144
1,378
Syracuse, NY
Why do I have such expensive taste:glare:

The build is impressive and love the different tops. A little long and could use some minor bling. The chip's turning me off though after watching the video. .

Maybe a box mod with replaceable batteries is in my future:2cool:

Thank you all for your help! I'm slowly learning and enjoying the input:)
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
Don't blast me for this but, these types, including Provari are designed for the right hander. As a lefty, my menu screen is upside down. I'm forced to use my right hand. Not a huge issue but it does bug me.

I get it completely, my mom and stepdad are BOTH lefties, so *I* grew up as the backward one in my house -- there was ONE pair of scissors that I could use, all the others were for lefties. :blink:

But maybe that's why you like the iTaste; I keep mine propped in a mug on the left side of my desk, because I use my right for my mouse... so I have grown fairly adept at making quick adjustments with my left hand - wattage up or down. I'm not even left-handed, and it's fairly easy once you do it a few times.

Andria
 

beckdg

ECF Guru
ECF Veteran
Verified Member
Oct 1, 2013
11,018
35,706
TN
The chip's turning me off though after watching the video.

how so? personally, i like the features of the nivel chip. i think phil puts a bad spin on it, personally. complaining about it not firing when it's not supposed to and such. only legitimate gripe about the chip IMHO is that it shuts off during an error. though, that even can be seen as a safety feature.

curious as to what it is that bothered you about it.
 

Purplepeeps

Ultra Member
ECF Veteran
Verified Member
Mar 10, 2014
1,144
1,378
Syracuse, NY
how so? personally, i like the features of the nivel chip. i think phil puts a bad spin on it, personally. complaining about it not firing when it's not supposed to and such. only legitimate gripe about the chip IMHO is that it shuts off during an error. though, that even can be seen as a safety feature.

curious as to what it is that bothered you about it.


If it was a pain for the pro...I would be in rough shape. Too complicated for me right now. Maybe down the road, when I'm more educated.

I'm wondering if I should try out the svd? They're cheap and look pretty sturdy too. I'm easy on things so it should hold up for me. Really just want more back up and be able to keep things in rotation.
 

AndriaD

Reviewer / Blogger
ECF Veteran
Verified Member
Jan 24, 2014
21,253
50,807
64
LawrencevilleGA
angryvaper.crypticsites.com
If it was a pain for the pro...I would be in rough shape. Too complicated for me right now. Maybe down the road, when I'm more educated.

I'm wondering if I should try out the svd? They're cheap and look pretty sturdy too. I'm easy on things so it should hold up for me. Really just want more back up and be able to keep things in rotation.

I love the way those look, but after reading the entire SVD thread, no thanks! More problems than you can shake a stick at, with the buttons, starting sometimes in as little as 3-4 wks after getting it. That's why I kept looking, and found the Sigelei Zmax v3.

Andria
 
Status
Not open for further replies.

Users who are viewing this thread