I have the KVS650 basically it's the standard ego with a standard 650 mah battery,it's the TYPE A version, I've tried the EGO-T LR Atty, I don't like it, makes my e-juice taste like crap, next I tried the clearomizer I don't like that either, while it makes the e-juice taste better I don't get that much vapor without sucking really hard (no homo), so I was wondering with my standard ego type A set up, whats the next step I could take? Does anyone know if an Atty that will screw onto the battery I have? I'm talking about a battery draining atomizer that will suck up some e-juice and blow clouds of vapor like the comin' of the Apocalypse.............
- Status
Cartomizers. Most people use cartomizers, not tanks.
Most popular for fat battery 510 threaded devices are Boge 2 ohm
Most popular for fat battery 510 threaded devices are Boge 2 ohm
5v mod. best upgrade i've made since I started vaping over a year ago. I'll never go back to 3.7v.
You can approximate 5v using a low resistance atomizer.
I also suggest boge cartomizers. I've tried most carto's on the market, but always go back to the boge's.
You can approximate 5v using a low resistance atomizer.
I also suggest boge cartomizers. I've tried most carto's on the market, but always go back to the boge's.
I have noticed that the tank would be good for a Daily flavor that you just about cant stop dripping in a cart, I just ordered some bauway 2.5 ohm clearomizer pack but have read that they are hard to get a hit off of, so i also got a few ce2s to play with in a DIY tank mod I seen by shaunB on you tube
I had a set of smoke tech cartomizer 1.6 dual coil on the 3.7 3000mah and they mad good vaper and held lots of juice, but they also seemed like they had really poorly soft threads on the end which tried to kill my adapter :{
you never, ever want to use unprotected batteries.
The risk of unprotected lithium ion batteries:
Lithium Ion Ionen battery overcharge & explosion - YouTube
Although it's not the same physical format, the chemistry is the same.
I sure wouldn't want that happening inches from my face, and I'm sure you wouldn't either. Couple that with the rather confined space the batteries are in, and you're putting your lips on a potential bomb.
If you're tripping the protection circuit, google AW IMR 16340. Typically, the IMR designation means it is capable of higher current flow, meaning, it won't trip the protection circuit.
Last edited:
"whats the next step I should take in vaping?"
Get others into vaping! I've got 3 daughters who all foolishly smoke, I'm gonna try to get them to VAPE! They're all online, maybe they'll lead me to new VAPING heights!
Get others into vaping! I've got 3 daughters who all foolishly smoke, I'm gonna try to get them to VAPE! They're all online, maybe they'll lead me to new VAPING heights!
Last edited:
thanks imma try the boge carto, sounds like an awesome idea, maybe try that brand of battery too, I can't wait to try the next step after that!
Make your own 4.8 volt mod for under $20 with parts from radio shack. Dead easy.Tutorial and pictures here...http://www.e-cigarette-forum.com/forum/battery-mods/106016-how-build-puck.html . This mod is awesome. Batteries are available anywhere in town from the grocery store to the dollar general or walmart. Takes a 901 atomizer or if you install the 510 connector with wires from madvapes, any 510 atty or carto at 3.0 ohms will vape clouds of great tasting juice.
P.S. There are even pump bottle fed versions so you don't have to drip and drive.
Check out reosmods.com
I use the Grand and will be buying a mini for my wife here really soon. The easiest way to vape. It truly is a grab and go PV.
I use the Grand and will be buying a mini for my wife here really soon. The easiest way to vape. It truly is a grab and go PV.
- Status
Similar threads
