No I haven't it's stock currently may look into that. I'll probably screw it up
Sent from my iPhone using Tapatalk
Where coils go to die.....
- Thread starter cr12
- Start date
- th_trl_thread_readers 0
- Status
No I haven't it's stock currently may look into that. I'll probably screw it up
Sent from my iPhone using Tapatalk
IDK man I have concluded (possibly prematurely) that I just taste cotton no matter what. Could be wrong but there's nothing wrong with silica or other wicking options out there (except it's a little more difficult to wick a micro [just a very little bit]).
yeah, now that airhole size is mentioned I agree with that too. 1/16th is a good general all around size unless you're deep sub ohming. I just naturally drill just about everything out to 1/16th when I get it as a good baseline starting point
Don't give up on building! Cotton just isn't for everyone, and that's ok.
Yeah I don't know if it's the cotton, I just cleaned the tube and bottles with alcohol, because when I would drip to fill the bowl it would taste good and squonking was funky
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
O.K. so dripping into the RM2 it tastes better, good even. And squonking you are not getting that good flavor.
So, it leads me to believe that your squonking needs a little work. You must squonk enough to soak the cotton inside the coil. If you are not getting enough juice in there you will not have good flavor.
Take the drip tip off and watch as you squonk. Watch the juice come up and cover the coil. Give it a few seconds to soak good. I squonk juice up over the coil. That way the juice has time to soak good before it drains back down.
Hope that helps.
Use Less Cotton, Also you may be wrapping the many coils. I find that if I don't get enough power burning the juice the cotton taste lingers for quite awhile. Which I have to say is awful, the only atomizers I use that never have a cotton taste out of the gate are the KayFun & Squape. Let me know if that works for you doing 6-8 wraps instead of 10. Also what the guy said above, MAKE SURE YOU LET THE JUICE ABSORB ALL THE WAY THROUGH THE COTTON BEFORE FIRING, YOU MAY WANT TO BURN IT FOR 5-6 SECOND WITOUT TAKING A DRAW, RE-APPLY THE JUICE THAN DRAW, JUST MY THOUGHTS
Well I've been tinkering and I'm getting closer I got a call tonight from Clark at nicoticket, he talked to me about getting the rm2 to work correctly for me, especially when using a juice such as the virus
I have some new ideas and I'm going to try them out I will continue to post my progress so that hopefully in the future if someone has trouble they will be able to benefit from my experience.
I must say that is the first time a juice vendor has gone out of their way to call me and help me with a problem completely unrelated to his particular product.
So big kudos to Clark at nicoticket, ps if you didn't know his juice is amazing!
Sent from my iPhone using Tapatalk
I have some new ideas and I'm going to try them out I will continue to post my progress so that hopefully in the future if someone has trouble they will be able to benefit from my experience.
I must say that is the first time a juice vendor has gone out of their way to call me and help me with a problem completely unrelated to his particular product.
So big kudos to Clark at nicoticket, ps if you didn't know his juice is amazing!
Sent from my iPhone using Tapatalk
Just a little 411 nerak is a gal not a guy. Her real name is Karen.
I have learned better squonking has made a large difference, I also slightly enlarged the airhole,
I also finally found a 1/16 hex wrench and compared it to what I have been wrapping on and I think I may have been wrapping a hair too small, I'm about to try to make a slightly larger coil, and see what it does...
Sent from my iPhone using Tapatalk
I also finally found a 1/16 hex wrench and compared it to what I have been wrapping on and I think I may have been wrapping a hair too small, I'm about to try to make a slightly larger coil, and see what it does...
Sent from my iPhone using Tapatalk
its surprising how the slightest alteration makes such a big difference, give everything a try, you can go less then 1/16 for a nano coil but I don't normally wick them that small, just use cotton cloud
1/16 & 5/64 wicked are good, I don't go any bigger then that unless I get bored
Just make sure you don't over fill coils with cotton, less is more, if its bulging out the end then that's to much, this is more important then placement of the coil
1/16 & 5/64 wicked are good, I don't go any bigger then that unless I get bored
Just make sure you don't over fill coils with cotton, less is more, if its bulging out the end then that's to much, this is more important then placement of the coil
Last edited:
If dripping tastes great but squonking tastes off. You may also want to consider taking the rm2 off and giving it a nice hot soapy bath. I usually just put some water in a gladware container, microwave, add dishsoap, and put the RM2 in and cover and shake for awhile, then rinse under water for a while to get the soap off.
It's possible that some of your previous unsuccessful attempts there was some burnt/nasty tasting juice that got sucked into the RM2 and are lingering.
It's possible that some of your previous unsuccessful attempts there was some burnt/nasty tasting juice that got sucked into the RM2 and are lingering.
if you haven't, try boiling the cotton few times (15min each). always use organic cotton.
cotton flavoring doesn't come from coil builds. so no matter what you do with the coil, it wouldn't make the cotton taste go away.
cotton flavoring doesn't come from coil builds. so no matter what you do with the coil, it wouldn't make the cotton taste go away.
- Status
