Which RBA to get???

[mlikoudis]

Hi Guys,

So i`ve been looking for some time now into getting a rba to use on my Provari V2. So I`m looking to get some opinons regarding which one to get from people who have one and have used several ones.

I`ve seen that many people like the AGA T2 which is also reasonably priced. Then i stumble upon the z-atty pro which is $150+. Most members say the only difference is the air draw. Is this enough to justify its price? I like a lot of vapor, so that`s what i`m ultimately looking from my RBA. I`ve read that such a thing depends on your wick and coil set-up. If this is true, then why buy a $150+ RBA when you can get a $30 RBA that will do the same job!

Which RBA to do you recommend i should get??? Also i plan on vaping an e-liquid that is high in VG (50% +) if that matters. Thanks for your suggestions and recommandations!!!

 

[Jaiofspam]

smoktech rsst over the aga-t2 if its your first budget rba. its easier to setup with the spring loaded positive post and insulated wick hole.

 

[Rule62]

If you're new to RBAs, there's no reason to spend $150+ just yet. Wait until you have a chance to decide whether you like rebuilding. I don't know much about drippers, so I hesitate to recommend any. Up until recently, I've only used genesis type RBAs. More recently, I've also been working with the Kayfun Lites.
For a newcomer to genesis RBAs, I'd recommend the RSST. For silica types, I'd recommend the Kayfun Lite. Either one can be had for a reasonable price, as compared to the high end units.

 

[mlikoudis]

Idealy, i don`t want to spend money on a begginer RBA when it can be put towards a better one that i would have gotten later on. I`m a quick learner and not worried about building the atomizer. I do not plan on spending more than $50 on one.

 

[Jaiofspam]

more money doesnt always mean better... the rsst is a clone of the ac9. it functions perfectly and was a breeze to setup. on that note, if you prefer something you can brag about you can go with any of the popular high end gennys on the market

 

[Thunderball]

Im not a user yet, but I have had some pretty in depth discussions with those that do and I have been told the RSST is the one to get...for me anyway, being a first time user. Just thought I would pass that along

 

[mcbender]

I have the agat2 not a bad little thing. But looks kinda wierd on the provari.

I have a zen2 atty on my brevis vapes very well. The zap has the skirt looks excellent on the provari.

I also have the ac9 from vapenaze. It's a very nice rba!

 

[Rule62]

Idealy, i don`t want to spend money on a begginer RBA when it can be put towards a better one that i would have gotten later on. I`m a quick learner and not worried about building the atomizer. I do not plan on spending more than $50 on one.

If you're set on not spending more than $50, definitely the RSST. If you add a pro ring, it will look great on a Provari, and still be within your budget.

 

[mlikoudis]

I appreciate everyone's input. Personally i don't care about the brand so it's not bagging rights. I want something that's good quality and will look good on my Provari. Also, something with a big air hole would be something i'd like. I read that the more air draw i have the more vapor i can get. Which RBA has a big air hole

 

[Rule62]

I appreciate everyone's input. Personally i don't care about the brand so it's not bagging rights. I want something that's good quality and will look good on my Provari. Also, something with a big air hole would be something i'd like. I read that the more air draw i have the more vapor i can get. Which RBA has a big air hole

I've found the air holes on both the RSST and the AGA-T2 a little small for me. Many folks drill them out a bit. I like 1.2mm. Some folks go bigger. They are very easy to drill. It only takes a couple minutes.

 

[ZeroDisorder]

I started with a AGA-Hydra, and I have to say, the features on the RSST makes thing better over all.

+1 for the RSST.

PS: Every air hole I get is immediately drilled out to 1/16". It takes a few seconds.

 

[Jaiofspam]

I appreciate everyone's input. Personally i don't care about the brand so it's not bagging rights. I want something that's good quality and will look good on my Provari. Also, something with a big air hole would be something i'd like. I read that the more air draw i have the more vapor i can get. Which RBA has a big air hole

rsst is the way to go, comes with a decent ss ming type drip tip too
only negative ive encountered is your unit may or may not leak... a little bit of teflon tape on the positive scew or an insulator from an aga-t is all thats needed to correct this issue. other than that... its t*ts bro.

 

[Royaldrunker]

Ya rsst is great but if you dont mind spending$25 now or wait for version 2 w glass tank

Also igo-l or w are excellent

 

[Drhookerman]

If you got a little bit of cash to spend I would suggest the Kayfun Lite or Kayfun 3.1, those look amazing on the provari. If you are on a budget I would suggest Igo.

Also consider looking at the hercules. (Ithaka clone)

 

[Heavyrocker]

NEW:

Richman Rebuildable Atomizer rba

Or the RSST with SS cable and your rocking.

 

[Jaxn73]

I just got into rbas. I started with the smoktech rsst. I love it. Took me about 30 min of playing with it to figure it out. Not saying my set ups are perfect yet. But good price point and easy set up. Paid about 36.00 for mine

 

[entropy1049]

Seriously, just get the RSST. If you love it, get the AC9.

 

[Vash]

Could also try cheap dripper like Igo l.Easy to build and plenty room to work with and for good size wick.

 

[mlikoudis]

So i finally decided to get the aga t2. I was going to get the rsst but i noticed that many people didn`t like the material of the tank......let`s see how things go

 

[Stefan Liao]

i've got my aga t2 set up with about a 3cmx5.5cm wick and a 3/4 wrap of ribbon wire. i have to be careful when i drive and vape because i can't see out the windshield with all the vapor. i'm planning on stepping up to a z atty just to finish my zenesis 2 piece.

the igo-l in my experience is an awesome dripper rba and i'm probably going to get an igo w to try dual coils cause damn it's hard to drill another hole into the igo-l cap.

i have my aga t2 drilled to 3/32 which is too much for most but i like it there and my igo-l to 1/16.