Why poor ego vapor?

Status
Not open for further replies.

Kent C

ECF Guru
ECF Veteran
Verified Member
Jun 12, 2009
26,547
60,051
NW Ohio US
Hello. I've got my ego kit today, and after few vaping i've noticed such thing. There are so little vapor.. I drip two or three drops on the atty before vaping. But only first few vapes are ok.. Next vapor production is really poor.. What am i doing wrong?

Something is wrong, the eGo puts out almost as much vapor as many mods. If you have the ability to check the battery with a volt or multimeter - see if you're getting around 3.1-3.4 volts. Then again if you have a multimeter, check the atomizer for 2.1-2.3 ohms. If both are in that range, then you're flooding that atomizer - the main reason for no vapor in any ecig. Blow out the atomizer from the threaded/battery end into a paper towel at the cart end. Put 2 drops on the bridge and restart. If you have a VG based ejuice try that for more vapor. Some thin ejuice are also thin on vapor.
 

DonDaBoomVape

Reviewer / Blogger
ECF Veteran
Jun 5, 2009
3,353
598
79
South Florida
www.VapingGuides.com
Everything that Kent said, plus:

If you got your ego kit today, your atomizers may not yet be broken in. I've found that, initially, I need to start with three or four drops and drip more frequently to get a new atty going. Precede this with the blowing out that Kent recommended.

blowingouttheatty.jpg

Also, you did fully charge your batteries, right?
 
Status
Not open for further replies.

Users who are viewing this thread