Wicking material ?

Status
Not open for further replies.

Str8V8ping

Vaping Master
ECF Veteran
Verified Member
Sep 10, 2011
3,944
2,077
NYC
I was looking up wicking material so i can buy some in case i eventually want to build my own rebuildable atty . I came to find that wick is fiberglass . How in the world could vaping fiberglass be safe ? Fiberglass is know to cause respiratory problems as i work with fiberglass all the time in making molds .Its also used in home insulation It is super itchy stuff that leaves small glass fibers everywhere and should be handled with a dust mask or respirator . Is there any other wick material that is used ?
 
Last edited:

Str8V8ping

Vaping Master
ECF Veteran
Verified Member
Sep 10, 2011
3,944
2,077
NYC
What do most people use ? . For the people using the fiberglass i know a cheap place to get it in bulk and that is fiberglass cloth from any automotive stores . It looks exactly the same as the wicks in a Ce2 .Makes sense since fiberglass cloth is made to absorb lots of resin . Also the strands inside reinforced packing tape . I cant see how it wouldnt be a health concern over time though . I beleive one of the hundreds of bad ingredients in analogs is fiberglass too .

Wouldnt silica be bad as well since silica is used in those moisture packs which are labeled toxic


While im asking questions on atty parts . Where can i find that black wire used in cartos to make a connection . Not the coil but the actual positive and negative black wire . Is that just coated copper craft wire ?
 
Last edited:

TomCatt

Da Catt
ECF Veteran
Verified Member
Mar 8, 2011
4,162
18,320
Upland, PA
What do most people use ? . For the people using the fiberglass i know a cheap place to get it in bulk and that is fiberglass cloth from any automotive stores . It looks exactly the same as the wicks in a Ce2 .Makes sense since fiberglass cloth is made to absorb lots of resin . Also the strands inside reinforced packing tape . I cant see how it wouldnt be a health concern over time though . I beleive one of the hundreds of bad ingredients in analogs is fiberglass too .

Wouldnt silica be bad as well since silica is used in those moisture packs which are labeled toxic


While im asking questions on atty parts . Where can i find that black wire used in cartos to make a connection . Not the coil but the actual positive and negative black wire . Is that just coated copper craft wire ?

From what I've seen around, most people are using silica for wicks (I believe this is one source ).

Silica GEL in what is used in the packets to absorb moisture:
From Wiki:
Silica gel is a granular, vitreous, porous form of silica made synthetically from sodium silicate. Despite its name, silica gel is a solid. It is a naturally occurring mineral that is purified and processed into either granular or beaded form. As a desiccant, it has an average pore size of 2.4 nanometers and has a strong affinity for water molecules.

Silica gel is most commonly encountered in everyday life as beads packed in a vapor-permeable plastic. In this form, it is used as a desiccant to control local humidity in order to avoid spoilage or degradation of some goods. Because of poisonous dopants (see below) and their very high absorption of moisture, silica gel packets usually bear warnings for the user not to eat the contents.
 
Status
Not open for further replies.

Users who are viewing this thread