Anybody have a link to a better atty/ battery connector? I am using the ones from mad vapes. Occasionally the center post doesn't make contact with atty. There has to be a better part out there.
Wildman Wood Mods
- Thread starter alekos557
- Start date
- th_trl_thread_readers 0
- Status
It arrived!
So nice. It feels great in the hand, very solid but still light enough to be comfortable using.
The craftsmanship shines through. The way that the hatch is designed is very nice and solid, the cover slides in easily right to flush and stays there. There is no way that the cover will move during usage. The button placement works good for either forefinger or thumb application, so it will work great no matter which way I pick it up. The inside wiring and connections are all very clean and well thought out. The juice well is quite deep and will work well for a bottom feeder, it would not work with a tank even with a extension or some drip shields. The button works good and has a slight click feedback, it is quite quiet but you can hear it and feel the break point.
vaping with it is awesome, pretty much every 3.7 volt 18650 mod that is properly built is going to be a close experience but the draw feels right even with the bottom feeder bottle hooked up. I tried quite a few attys and cartos and the only one that was too stiff of a draw was a xxl smoktech dual coil that has that problem on alot of devices, even with it though it was still a enjoyable vape.
I am one very happy customer. Thank you Alekos!
So nice. It feels great in the hand, very solid but still light enough to be comfortable using.
The craftsmanship shines through. The way that the hatch is designed is very nice and solid, the cover slides in easily right to flush and stays there. There is no way that the cover will move during usage. The button placement works good for either forefinger or thumb application, so it will work great no matter which way I pick it up. The inside wiring and connections are all very clean and well thought out. The juice well is quite deep and will work well for a bottom feeder, it would not work with a tank even with a extension or some drip shields. The button works good and has a slight click feedback, it is quite quiet but you can hear it and feel the break point.
vaping with it is awesome, pretty much every 3.7 volt 18650 mod that is properly built is going to be a close experience but the draw feels right even with the bottom feeder bottle hooked up. I tried quite a few attys and cartos and the only one that was too stiff of a draw was a xxl smoktech dual coil that has that problem on alot of devices, even with it though it was still a enjoyable vape.
I am one very happy customer. Thank you Alekos!
Just be careful not to overfill the atty, all bottom feeders can vacumn feed if overfilled.
Hopefully this will never leave your hand...well maybe once in a while is OK.
Hopefully this will never leave your hand...well maybe once in a while is OK.
Untamed Rose...testing your mod for the PIF gala. will mail in morning.
Oh made it "Kick" ready.
Oh made it "Kick" ready.
Madagain: Your lacewood is absolutely gorgeous. It looks perfect in your hand.
Alekos: You do such classy, superb work. I remain in awe over that lacewood grain. I know it's a pain to work with, but I hope it remains an option for when the vv makes its debut.
Alekos: You do such classy, superb work. I remain in awe over that lacewood grain. I know it's a pain to work with, but I hope it remains an option for when the vv makes its debut.
Last edited:
OK, one for the DIY crowd Walnut
internal set up for easy installation, with partition, will fit the heavy duty spring from madvapes.
predrilled for switch, also inset so body of switch is mostly hidden.
Can groove the other side if desired, just let me know.
$30
A wild grained walnut mod, will build as a 18650 dripper with the digikey switch, heavy duty spring.
Can make for "Kick" if desired.
Will go for $65
Still waiting to see a nice dark crazy grain like that walnut in an 18650 bottom feeder...LOL
Bad Mojo completed. Skipped the ground plate.
306 LR atty, Universal driptip, fresh batt.
Life is good.
Good night all.
306 LR atty, Universal driptip, fresh batt.
Life is good.
Good night all.
Last edited:
Once again you have made some outstanding looking mods. Will make somebody very happy!!
I have Bocote, Lacewood, Walnut.
I could do Lacewood or Walnut for $30+ shipping
Bocote I have to go $50.
I could do Lacewood or Walnut for $30+ shipping
Bocote I have to go $50.
- Status
Similar threads
