Will an 801 adapter fit Tornado and still have cover fit over it

[son et lumiere]

Does anyone know yet if i 810 adapter can be used on the titan tornado and still have the covering sleeve fit over it? I think it would be awesome if the adapter could be hidden. That's about the only thing that has prevented me from getting one. Also will an 801 atomizer produce just as much vapor as the 510 atomizer?

And OT: who do they use for shipping is it UPS?

 

[blackbug]

Honest answer, I don't know. The diameter of an 801 might not fit up through the covering. But the tornado's (eGo) bigger brother will be based on an 801 I think. Whether TW will stock that is another matter.

 

[son et lumiere]

I beleieve it's the exact same product just rebranded.

 

[tribalmasters]

The adapter would have to be a very long one as the 801 attie will not fit through the hole by the looks of it!

 

[son et lumiere]

Thanks That's what I was kind of expecting. Just wondering if anyone had any clarification.

 

[tribalmasters]

When mine turns up I'll give it a try! of course you could always use it without the nose cone but I'm not sure if it will affect draw! 801 aties taper ever so slightly so even the sucking end and cart is not the small diameter of a 510, unlikely to be able to poke out the nose cone without being extended with the adapter end sticking up through the nose cone and then 801 attie sitting on top of that.

Vape more equipped for 801 long time use may be preferred, I use my 801 in the Janty Stick and use a USB battery pack for long time vaping with 801 but that way it needs to be tethered to the battery pack whilst charging, one of the reasons I wanted this hehe!

 

[son et lumiere]

Thank you.

 

[stubear62]

You cannot use an 801 atty one either the eGo or the tornado. The atty is too big.
Hope this helps.

Also the 801 atty will, or actually should be able to be used on the bigger brother to the eGo which it is for.

 

[tribalmasters]

The Janty Baby J is not available yet but keep an eye out for it! Features include a built in USB port to vape&charge like a passthrough!!

 

[tribalmasters]

Yes yes! I got my shiny white one and can confirm that 801 atties do not fit with the nose cone in place using the adapters I have! The adapter needs to be slightly longer than a 510 attie if you can find one!

It will work without the nose cone tho as it doesn't do too much to the draw

 

[son et lumiere]

Good to know. Thanks.

 

[metameme]

It really wouldn't be all that hard for joye to release a special cone with a larger hole for 801 atomizers would it? I sure hope something like this happens, my janty stick just got permanently stuck on and I have a bunch of standard atomizers..

 

[stubear62]

Janty at this time is not making a cone for the eGo that will allow the 801 atty to be used. This atty will be for the Baby J when that PV comes out.
The Tornado is only for the 510 atty and the only way to use an 801 atty is if you modify the cone yourself. I am not saying to do, but you could on your own accord. This will void all warrenties though.

 

[Jimi Mack]

I am waiting for a shipment of cones that I am looking to modify. The first one on my list is to cut it down to take the 801 atty. Hopefully the shipment will arrive tomorrow. I am very eager to find out how the eGo will work with a 801 atty, kind of making my own Baby J.

 

[stubear62]

I am waiting for a shipment of cones that I am looking to modify. The first one on my list is to cut it down to take the 801 atty. Hopefully the shipment will arrive tomorrow. I am very eager to find out how the eGo will work with a 801 atty, kind of making my own Baby J.

How is it going on that modification, Jimi? Did you do it? iHow is the 801 on the Baby J eGo?

 

[timh]

I have had my e-go for about a week now . And have been thinking about the same thing . All you have to do is cut the cone down so a 801 atty will go in it with a liitle room to spare so it would be able to draw.

tim

 

[Jimi Mack]

I am happy to report that if you cut off the top 1/3 off the cone you can then slip a 801 atty through it. Of course this extends the length of the entire unit, and it is not as bad looking being the cone still covers the adapter and atty. You just want to make sure you do a clean straight cut, then smooth down the cut edge. I found out this needs to be done after nicking my finger.
So as of now, I have my very own custom made Baby J.

 

[ournature]

I am happy to report that if you cut off the top 1/3 off the cone you can then slip a 801 atty through it. Of course this extends the length of the entire unit, and it is not as bad looking being the cone still covers the adapter and atty. You just want to make sure you do a clean straight cut, then smooth down the cut edge. I found out this needs to be done after nicking my finger.
So as of now, I have my very own custom made Baby J.

interesting, i have a spare cover cone, how did you cut it?

 

[son et lumiere]

I was thinking if you grinded down the edges of the adapter you wouldnt have to modify the cone.

 

[MacDiver]

I have the Tornado but haven't got a sleeve yet cause I can't find one available

Will the sleeve fit over an adapter for 808 cart and caromizer? I've been using both.

I hope so the sleeve really makes it look nice!