Win a FREE Super-T1!!!!!!!
- Thread starter forcedfuel50
- Start date
- th_trl_thread_readers 0
- Status
It's an impossible task!
Being a machinist in my previous life and mechanical engineer before that I would say it is impossible to identify the two T1s with a sleeve simply because , again, it 's impossible - machining two peaces of SOFT aluminum while they screwed together make them always look like one peace.
But for what it worse - #3 and #4.
Being a machinist in my previous life and mechanical engineer before that I would say it is impossible to identify the two T1s with a sleeve simply because , again, it 's impossible - machining two peaces of SOFT aluminum while they screwed together make them always look like one peace.
But for what it worse - #3 and #4.
#2 & #4 are slightly darker looking in the photo.. of course that means nothing.. but worth a guess
Thats why i made it a lottery type contest so everyone has a chance of winning, as it really comes down to a guess
One of them though you can just barely make out the seam on in the pics. In person, if you look real close you can just make them out. Alot of good machining just comes down to taking the time and not rushing things. Though maching them together doesn't always make an invisble seam as one has to first make sure that he has faced both mating surfaces perfectly. Machining them together takes a few extra steps, but it is worth it imo.
Last edited:
Sent in my guess. Not saying which I selected since it was purely a guess.
Good luck, everyone!
Good luck, everyone!
Hint #2:
Don't give up, the seam is located about exactly half way up. If you are looking for the seam up high or down low, you are way too slow...
Rapper lil' Dave
Don't give up, the seam is located about exactly half way up. If you are looking for the seam up high or down low, you are way too slow...
Rapper lil' Dave
Last edited:
- Status
Similar threads
