Wismec Coil Advice/in dire need of help

[BobScwhab]

So, just started a week ago and am figuring this out as I go.

Was wondering if anyone could tell me about the coils for the Wismec reuxleux rx mini. I had a really hard time finding coils for the tank that came included called reux mini, but could find amor mini coils easily. From what I read most sites listed them as the same and it looked like it was a branding thing. So I bought them, however just noticed that the mod says the ohms are different. The originals included in the kit said the ones included were 0.21 ohms and this one is 0.24.

Basically I'm wondering if I'm going to die. And if not if this safe?

 

[HemiHonda]

I'm not familiar with Wismec, but I'm sure someone who is will chime in soon.

 

[BobScwhab]

I'm not familiar with Wismec, but I'm sure someone who is will chime in soon.

In general do you know if the ohms being slightly different is bad for vw style regulated mod? Funny thing is, now it says it's 0.22 ohms. Seems to be running fine.

 

[Kickingthesticks]

Your fine as long as the coils fit in your tank. And your not drawing more amps than the battery is rated for. Ohms May jump up and down a little when the coils is hot. As a beginner I would recommend you check out some YouTube videos on ohms law and battery safety.

 

[Smoke_too_much]

what he said.

Your mod's spec's say it is good to handle atty resistances from 0.5 to 1.5 ohms so for anything that falls into this range you should be fine and the mod should be able to handle it. Since it is an integrated battery the manufacturer would have taken all this into account when determining the operating specs. The difference of 0.03 ohms from one coil to the next is not unusual.

 

[wheelie]

I had a Wismek Amor and ran Joytech Ego one coils in it. They were the very same coils with a wide variety of options in ohms. I assume that's the coils for your new Wismec tank as well? CHEERS!

After looking up your system your tank takes Atlantis/Triton/Melo2/Hercules and a few other coils. I have replaced them for people when I worked in a vape store. That way you have a wide option of many different coils and find the one that suits you best.

 

[SteveS45]

You will find many times that coils will differ slightly in the same package that minor amount of resistance and it normally isn't a problem as long as the coils are made for or work with the MOD.

 

[HemiHonda]

@Smoke_too_much, so then it looks as if his mod shouldn't be used at that low of a resistance? That's some good info.

 

[djsvapour]

According to the Wismec site accessed from the UK, the resistance range is 0.1 to 3.5 for VW. I don't know if that's helpful.

Shopping for Wismec stuff is a little tricky in the UK unless you want to do the "dance of special prices" with the Totally Wicked shops.

 

[daviedog]

I make my own coils, and would be thrilled with a variance of .03 ohms.
If you exceed the resistance range of your mod, it won't work & will display an error message..

 

[HemiHonda]

@daviedog, I agree...but I have had a few of my mods fire even though the resistance range was exceeded.

 

[daviedog]

@daviedog, I agree...but I have had a few of my mods fire even though the resistance range was exceeded.

Be carefull of any mod that breaks through engineered firewalls..

 

[HemiHonda]

Be carefull of any mod that breaks through engineered firewalls..

Yep, no longer in use...lol

 

[SteveS45]

@HemiHonda just out of curiosity which MOD's fired a coil it wasn't rated for? Inquiring mind wants to protect the face! LOL

 

[HemiHonda]

I won't go into great detail, but one was a box mod from vaporfi. This was awhile back when I didn't have a clue about anything. I should have probably just thrown the $150 I spent on it in the trash.

 

[daviedog]

I won't go into great detail, but one was a box mod from vaporfi. This was awhile back when I didn't have a clue about anything. I should have probably just thrown the $150 I spent on it in the trash.

Like isn't for you getting stiffed by vaporfi, but for putting it in the past. Where it Belongs..

 

[HemiHonda]

Like isn't for you getting stiffed by vaporfi, but for putting it in the past. Where it Belongs..

LOL, if you only knew how much money I spent on their products back in the day. In the past indeed.

 

[djsvapour]

I won't go into great detail, but one was a box mod from Vaporfi. This was awhile back when I didn't have a clue about anything. I should have probably just thrown the $150 I spent on it in the trash.

I feel this and we don't even have these people carrying on their business in the UK.
What I want to know is - when is the vaping community going to stop recommending them? I mean, it's not hard. Don't sell out your fellow vaper for a few lousy bucks.

Spinfuel? Vaping 360? ECCR? Come on... it's ridiculous. STOP IT.

 

[HemiHonda]

I feel this and we don't even have these people carrying on their business in the UK.
What I want to know is - when is the vaping community going to stop recommending them? I mean, it's not hard. Don't **** your fellow vaper for a few lousy bucks.

Spinfuel? Vaping 360? ECCR? Come on... it's ridiculous. STOP IT.

I couldn't agree more. When I first started out, I didn't know about this site and just Googled "best vape products"...they always popped up.

 

[SteveS45]

I won't go into great detail, but one was a box mod from vaporfi. This was awhile back when I didn't have a clue about anything. I should have probably just thrown the $150 I spent on it in the trash.

Well at least I got a word out of it for the wise! Maybe a few extra........