Wooden pipe MOD

[slimest]

Colleagues, if you use a small rare earth magnets for contacts, do you solder them? Or what?

P.S. I also found out these magnets useful for contacts: http://www.supermagnete.de/eng/magnets.php?group=countersunk

 

[asdaq]

Dual Boosters, of course.


Nah, it's 8 wraps and the one in the middle is 2.7Ω.

Slimest, They can break under high heat conditions, but I use a small cheap crimp on connector (tin maybe) on a wire, soldered for better longetivity, and then stick the magnet to that. That in turn sticks to a battery for example. Also, you can press fit them into the right sized hole, or glue them in place. Cabinet makers use the ones you linked to screw onto wood. Searching 'ring magnets' in ebay will give all sorts of sizes.

 

[derJuF]

@slimest:
I soldered a little piece of a tinplate at the + wire, put it on the magnet and fixed this "sandwich" with Power knead at the bottom of the pipe

 

[slimest]

derJuF, according to description, this glue is insulator. Did you try the connection resistance under load?

 

[WillyB]

Colleagues, if you use a small rare earth magnets for contacts, do you solder them? Or what?

Kinda tough to do as they tend to demagnetize from the heat.

 

[derJuF]

derJuF, according to description, this glue is insulator. Did you try the connection resistance under load?

You are right, and of course there is no glue between the tinplate and the magnet, just to hold down both parts at the bottom of the pipe

 

[Keegan1014]

This thread inspired me, meet my new pipe
Called my petite

Sent from my GalaxyNexus

 

[WillyB]

This thread inspired me, meet my new pipe
Called my petite

A few more pics, showing some construction details would be helpful.

 

[Bostonsnboxers]

sorry...wrong thread
All these pipes are gorgeous though! I'm droolong over here
Nice work.

 

[Turbo]

Very nice, a Genisis pipe would be great to have.

 

[pebo88]

really cool pipe mods, given me ideas...

 

[chaikwa]

As an analog pipe smoker since I was 14, this is what I want to do to a pipe or two I already have. I just don't understand all the electronic jargon.

I wish there were 'off the shelf' parts I could use to make it easier for someone like me to do a project like this.

 

[chaikwa]

I used the complete circuit from a defekt slim-akku ...

Could you please explain what a 'defekt slim-akku' is?

... there are nowhere pipes to by that i like

I agree and that's the reason I want to build my own.

 

[derJuF]

the complete electronics & vacuum switch from a "automatic" battery like this :slim-battery

 

[chaikwa]

I see. Thanks!

 

[DhafirAlfar]

hi
Seeing these mods here and there in this forum makes me droooooool .. specially the very nice ones like this one

 

[MadmanMacguyver]

All these beautiful toys...nice work on the pipe...I'm currently trying to make a unique pipe mod...I have little hope of it looking that nice tho...

 

[carlton M]

Someone PLEASE post a "How to Make an E pipe" PLEASE!

 

[Turbo]

Someone PLEASE post a "How to Make an E pipe" PLEASE!

Here's one that I know of...

 

[carlton M]

Thanks Turbo!
After watching this, I just bought a cheap pipe and ordered a box mod kit from Mad Vapes that I will steal the parts from.
This will be my first attempt at modding (or even soldering!) wish me luck!