xvostick clone any owners?

[Jonner]

If someone with the Xvostick clone and an SX Mini (S Class) would be able to help? I'm sitting here looking at my SX Mini S Class and wondering whether the SX350 board would fit the clone enclosure? It would need some modification (buttons, battery sled, etc...) but I have a friend who used to own a small electronics shop who is excellent at soldering, which I can't do to save my life. Don't want to take apart SX Mini until I have a better idea of whether it will fit.

I think the SX board in a side by side would be the bee's knees.

 

[skotsour]

Well, my package was ~40 miles from me in Chicago, but for some reason the USPS thinks it's efficient to send the package to Indianapolis (which is ~135 miles from me) before actually getting it to my house. I'm updating my arrival estimate to sometime around Thanksgiving. It'll probably go to New York next...

 

[DPLongo22]

If someone with the Xvostick clone and an SX Mini (S Class) would be able to help? I'm sitting here looking at my SX Mini S Class and wondering whether the SX350 board would fit the clone enclosure? It would need some modification (buttons, battery sled, etc...) but I have a friend who used to own a small electronics shop who is excellent at soldering, which I can't do to save my life. Don't want to take apart SX Mini until I have a better idea of whether it will fit.

I think the SX board in a side by side would be the bee's knees.

Me too. I'd LOVE to see it. The DNA40 is... "meh!" (for me).

And @Katdarling is now taken to referring to them as "Topless", which is a name I kinda like. Not sure why.

Well, my package was ~40 miles from me in Chicago, but for some reason the USPS thinks it's efficient to send the package to Indianapolis (which is ~135 miles from me) before actually getting it to my house. I'm updating my arrival estimate to sometime around Thanksgiving. It'll probably go to New York next...

Omigawd - sounds like a journey one of my Kabuki's went on some time back. Sorry, @skotsour .

It does appear that Kat's arm-waving has paid dividends. Said pilot is dropping our clones/clownstix off at The Kathouse today, instead of Katurday.

 

[Jimi D.]

Tootle puffing on ClownSticks. LOL !!

 

[DPLongo22]

Tootle puffing on ClownSticks. LOL !!

It doesn't get any better than that!!!

 

[Katdarling]

If someone with the Xvostick clone and an SX Mini (S Class) would be able to help? I'm sitting here looking at my SX Mini S Class and wondering whether the SX350 board would fit the clone enclosure? It would need some modification (buttons, battery sled, etc...) but I have a friend who used to own a small electronics shop who is excellent at soldering, which I can't do to save my life. Don't want to take apart SX Mini until I have a better idea of whether it will fit.

I think the SX board in a side by side would be the bee's knees.

Jonner ...... I'm LIKING this idea, VERY much. I know the DNA chippies are quite popular, but I'm finding them.... welp?? "IFFY"? In agreement with DPL. Love the modder.......not cray cray about the chippie.

I am experiencing a WHOLE lotta iffy with them.

Well, my package was ~40 miles from me in Chicago, but for some reason the USPS thinks it's efficient to send the package to Indianapolis (which is ~135 miles from me) before actually getting it to my house. I'm updating my arrival estimate to sometime around Thanksgiving. It'll probably go to New York next...

Oh Skot!!!!!! Oh man, so is the life of the vaper and vaperette. By the way, I'm pretty sure that was yours I saw tonite, , ,

near LAX!

Me too. I'd LOVE to see it. The DNA40 is... "meh!" (for me).

And @Katdarling is now taken to referring to them as "Topless", which is a name I kinda like. Not sure why.



Omigawd - sounds like a journey one of my Kabuki's went on some time back. Sorry, @skotsour .

It does appear that Kat's arm-waving has paid dividends. Said pilot is dropping our clones/clownstix off at The Kathouse today, instead of Katurday.

Thank you, DPL! That IS it. I do believe that our new TOPLESS mods are going to gain in popularity as time goes on.


And......


<minor drum roll, please>


CLOWNSTIX have arrived!!!!!!!!!!!!!!!!!!! More to come, so please stay tuned.


(who else has both clownstick and authie, please? I'd like to commiserate.)

 

[mgmrick]

And......


<minor drum roll, please>


CLOWNSTIX have arrived!!!!!!!!!!!!!!!!!!! More to come, so please stay tuned.


(who else has both clownstick and authie, please? I'd like to commiserate.)[/QUOTE]

I think that you would be the first..... AND......

 

[Jonner]

Kat, working on it, check this out peoples:

Comes in 26650 mode for sx350, downsides, no seatbelt to protect tanks, looks huge with 26650 battery, but might contact shop and see what we can do

 

[Jonner]

And some of us were questioning our ethics in buying clones, look familiar?

 

[Jonner]

I would have been a great detective, lol

 

[Flt Simulation]

I just want to know if all these XvoStick clones which were purchased from 3FVape get a "Ohms Too High" error message when using a coil of greater than 1.0 ohms.

If they do, maybe the clones from FastTech or Focalecig don't have this error message problem (different Chinese manufacturer possibly)?

 

[mgmrick]

I just want to know if all these XvoStick clones which were purchased from 3FVape get a "Ohms Too High" error message when using a coil of greater than 1.0 ohms.

If they do, maybe the clones from FastTech or Focalecig don't have this error message problem (different Chinese manufacturer possibly)?

Yes it is an error message but it DOES not effect the vape. It's a glitch yes but has ZERO effect on the vape. You will not see the message as it only flashes when you are pressing the fire button... so you would need to be looking in a mirror.

For me it's a non issue

 

[Flt Simulation]

Thanks for the info ...

I wonder if anyone has mentioned this to 3FVape ... Even though it don't effect the vape, obviously something is screwed up with the chipset if it gets this error message when the fire button is depressed ... 3FVape could at least bring it to the attention of whoever manufactures this clone.

Well, Fasttech, Gearbest and Focalecig also sell this clone ... It will be interesting to see if people that have the XvoStick clone from one of these other companies also has this problem.

 

[mgmrick]

Thanks for the info ...

I wonder if anyone has mentioned this to 3FVape ... Even though it don't effect the vape, obviously something is screwed up with the chipset if it gets this error message when the fire button is depressed ... 3FVape could at least bring it to the attention of whoever manufactures this clone.

Well, Fasttech, Gearbest and Focalecig also sell this clone ... It will be interesting to see if people that have the XvoStick clone from one of these other companies also has this problem.

Video has been sent to 3f but I don't expect much.....

 

[jmarkus]

<minor drum roll, please>


CLOWNSTIX have arrived!!!!!!!!!!!!!!!!!!! More to come, so please stay tuned.


(who else has both clownstick and authie, please? I'd like to commiserate.)

hey kat, did you have to sign for that 3f package?

 

[DPLongo22]

Kat, working on it, check this out peoples:View attachment 500695

Comes in 26650 mode for sx350, downsides, no seatbelt to protect tanks, looks huge with 26650 battery, but might contact shop and see what we can do

Cool, but it needs a seatbelt. [emoji16]

 

[drugarth]

@Jonner: what mod is that?
edit: googled it and it seems a DIY mod?

And another question: for some of us the clone was shipped around the same time (around 15th of october), did your tracking update on the 3fvape site? Mine has not changed since leaving china on the 17th.....wondering if that's normal

 

[Katdarling]

Kat, working on it, check this out peoples:View attachment 500695

Comes in 26650 mode for sx350, downsides, no seatbelt to protect tanks, looks huge with 26650 battery, but might contact shop and see what we can do

Hmmm.... like riding in a jeep with no doors.

I just want to know if all these XvoStick clones which were purchased from 3FVape get a "Ohms Too High" error message when using a coil of greater than 1.0 ohms.

If they do, maybe the clones from FastTech or Focalecig don't have this error message problem (different Chinese manufacturer possibly)?

If that's in Temp mode, I cannot say. If you mean in normal mode, mine have not produced that message ever. ("Ever" being tonite, as I just got them this afternoon)

hey kat, did you have to sign for that 3f package?

I did..... I signed "jmarkus". Hope that's ok.

No, just kidding. No sig necessary.

 

[jmarkus]

xvocellent, thanks kat!!

 

[Katdarling]