Your best coil build for FLAVOR (sweet ejuice) on a kayfun please? No clouds, just flavor.

[ErnieKim]

I'm mainly looking for the wire diameter, coil diameter & number of wraps that give you the best flavor. I use boiled cotton and have 26 ga and 30 ga wire right now.

Thanks,

Kim

 

[Paradicio]

26g, 7 wraps gets me to 1.2 ohms. vape at 15 watts. It's heaven.

 

[dchemist]

27 ga 11/10 wrap around 2 mm syringe. Puts me about 11+ watts. Wicked with Rayon.

 

[Susaz]

With silica, 6 wraps of 28 ga Kanthal runs to 1.3 ohms.... This build is highly usable, lasts me up to 1 month without changing silica!

 

[Signmaker]

28ga, 5x2mm wraps in a tensioned contact microcoil for 0.98 ohms, wicked with cotton wool, fired at 22 watts. Would be very happy with it on a VW mod, but on my mechanical it peters out under 20 watts. When the wick finally gives (3 days chain vaping strong so far), I'm going to drop a coil to see where it gets me.

 

[Cullin Kin]

9 wraps 26 gauge on a 3.25mm mandrel. Comes out to 1.4Ω and you won't need to go above 18W.

 

[ErnieKim]

"The Survey Says": target 1.3 ohms. Hope you get my pun. But there does seem to be some consistency in everyone's responses. I'm going to sit down right now and see if if can wrap it.
Thanks everyone,
Kim

 

[Asbestos4004]

I prefer 1.2 ohms with .28 when I used a kayfun. 8 wraps on a 5/64" bit. Rayon or Japanese cotton wicks.

 

[RuDawg7890]

I prefer the chimney coil. I use 30ga, 8 wraps around a 14ga needle. Usually around 2ohm.


Sent from my iPhone using Tapatalk

 

[Thunderball]

I prefer 1.2 ohms with .28 when I used a kayfun. 8 wraps on a 5/64" bit. Rayon or Japanese cotton wicks.

This is exactly my favorite configuration and what I use to wrap mine.


Sent from my iPhone using Tapatalk

 

[thmstwwng]

KFL+ v2 kanthal 28g, 10 wrap 2mm, Muji natural cotton pad, ProVari 3 at 9-10w!

 

[Asbestos4004]

This is exactly my favorite configuration and what I use to wrap mine.


Sent from my iPhone using Tapatalk

Then I know I'm doing it right...Thunderball walked me through my first coil build when I was just a wee 'lil vaper. He's been my guiding light ever since!

 

[Renuzor]

5 full wraps of 0.25mm kanthal on 2mm drill and rayon cellucotton. 14.5 watts

 

[ErnieKim]

Would asbestos' build perform even better in the chimney configuration?; make a good thing even better possibly?
Kim

 

[Kevin littell]

7 wraps 28 ga Nichrome on a 3/64th's bit, chimney conifg and wrapped in J cotton...1.1 ohm....good when ya hit the button.

15 days of 6ml a day vaping on last re-wick.

 

[ErnieKim]

Thanks for the help. I've got some things to try now.
Kim