Your device preferences...

[this is my name]

I wanted to start a thread like this. I use a few, very different setups.
I have a Kanger GeniTank that is a mouth to lung hitting tank. I like 6 mg/ml nic in it and mostly use it at work for stealth clouds. I usually have it at 9 watts on my Vaporshark rDNA 40.
I have a Kanger SubTank Nano that I primarily use with ni200 coil heads. I go down to 3 mg nic for this.
A Plume Veil clone that I like putting different flavor builds in. I've done claptons, interlocking chain, zipper and other twisty builds. 3 mg nix for this one too.
Last is my Airek clone (dripper) which I use on a Tesla Sea Rover mech mod. I only use dual macro coils in 24 or 22 gauge and usually only vape 0 nic in it.
So I'm a tootle puffer, a cloud chaser, and everything in between.

 

[VapieDan]

I didn't realize there was that much room in a lemo to build a coil that big. I have a couple of Kayfun clones, but no way I could get anything that big under the chimney. I tried a 3mm 6 wrap with 28G kanthal and it arced out to the cap. It didn't actually touch, but was close enough it did arc.

So I take it my capt hanger build is out?

 

[AndriaD]

I didn't realize there was that much room in a lemo to build a coil that big. I have a couple of Kayfun clones, but no way I could get anything that big under the chimney. I tried a 3mm 6 wrap with 28G kanthal and it arced out to the cap. It didn't actually touch, but was close enough it did arc.

The largest I've used in a Kayfun is 7/64 ID, which comes out to 2.78mm. Nowadays I mainly use 3/32, which comes out to 2.38mm. I still wanna know where all y'all are finding metric drillbits, because Home Depot doesn't carry 'em.

Andria

 

[Oregon Linda]

For stealth vaping, I use an iStick 30W and a GS Air M tank. I also have a couple of MVP 20W's, and SVD 2.0, and a Kbox. But that tiny little iStick is a great stealth device with plenty of power for a tootle puffer like me.

 

[juggler86]

^ istick 30 or kangertech RED/BLACK is HOT

Kanger what the new Subox? They look sweet, but dont think it could be considered stealth especially if you use the tank that comes in the kit.

Ive been using a Patriot v2 on my IPV Mini2. For being called a Mini id say the IPV Mini is far from mini. Maybe if you had Shaq hands it would be mini.

 

[Completely Average]

Ive been using a Patriot v2 on my IPV Mini2. For being called a Mini id say the IPV Mini is far from mini. Maybe if you had Shaq hands it would be mini.

LOL. That "Mini" is almost as large as the Snow Wolf 200W which is a dual battery mod.

IPV2 Mini = 3.75" X 1.65" X .88"
Snow Wolf 200W = 3.94" X 2.05" X .98"

 

[Cowboy192]

I didn't realize there was that much room in a lemo to build a coil that big. I have a couple of Kayfun clones, but no way I could get anything that big under the chimney. I tried a 3mm 6 wrap with 28G kanthal and it arced out to the cap. It didn't actually touch, but was close enough it did arc.

Much more room on the lemo than the Kayfun, my Kayfun I build a 2mm I'd coil using 30awg kanthal to 1.8ohm, I find the Kayfun needs a small tight coil where the lemo needs a big coil or it floods and gurgles

 

[sc12]

Clouds - Sigelei 150W + Atlantis V2 (0.3)
Flavour - Sigelei 150W + Subtank (0.5)
Semi-Stealth - Sigelei 150W + Nautilus Mini (1.8)

Obligatory stealth vape attempt on a Subtank (earlier today):

For non-sub ohm I would recommend a Nautilus Mini (1.8) on any eGo style mod that can reach up to 4.8V.

Hardly noticeable. lol

 

[down-south-vaper]

Does anybody ever even use the old classic ego with a clearomizer or t3 , or am I the only one . Everything sure has changed since the first time I went into a vape shop.(vaping sisters on 9mile in pensacola Florida around july 2012) Im so thankful for this forum and ecigs in general. They have changed my life and thousands of others. Thanks for all the feedback guys.

 

[dom qp]

Does anybody ever even use the old classic ego with a clearomizer or t3 , or am I the only one . Everything sure has changed since the first time I went into a vape shop.(vaping sisters on 9mile in pensacola Florida around july 2012) Im so thankful for this forum and ecigs in general. They have changed my life and thousands of others. Thanks for all the feedback guys.

I use an Ego Twist with a T3 when everything I have is charging . They surprisingly still work not bad.

 

[Hans Wermhat]

I still wanna know where all y'all are finding metric drillbits, because Home Depot doesn't carry 'em.

I don't know if they are a national chain or not, but there is a place called "Harbor Freight" here in Dallas. They are a cheap Chinese tool supplier. It's a great place to pick up small, oddball tools that fit in a go bag as well as metric stuff. But my Home Depot has a metric drill bit kit too, so it may just be a local thing.

 

[Completely Average]

Does anybody ever even use the old classic ego with a clearomizer or t3 , or am I the only one . Everything sure has changed since the first time I went into a vape shop.(vaping sisters on 9mile in pensacola Florida around july 2012) Im so thankful for this forum and ecigs in general. They have changed my life and thousands of others. Thanks for all the feedback guys.

I've got a pair of old Halo Tritons sitting in a cabinet at home, but I haven't touched them in almost 2 years.

I wonder if they still work.

 

[GeorgeS]

Also do you have opinions on what the best ego style batteries and clearomizers are nowadays. I was using the same battery and MT3 for about a year and a half before it significantly lost its output and I would usualy just get a pack of coils for the mt3. Im gonna get another setup like this and would appreciate any input from you guys .

I started on a eGo style 'clk!' which had the redeeming features of mUSB pass through charging on the side and VV on the bottom. I still use it daily as the setup I bring to work with me - small/light and does the job. Sadly, I've not seen these heavily discounted. I see lots of eGo stick "clone"s however they don't have usb pass through charging.

I think the best bet is to get a iStick20, iStick30 (or a clone of ether) with a 510-to-eGo adapter. As far as clearomizers go, I still have a few Aspire Maxi and K1's (both with BVC's) in my tank rotation. While small on capacity, they just work.

 

[AndriaD]

I don't know if they are a national chain or not, but there is a place called "Harbor Freight" here in Dallas. They are a cheap Chinese tool supplier. It's a great place to pick up small, oddball tools that fit in a go bag as well as metric stuff. But my Home Depot has a metric drill bit kit too, so it may just be a local thing.

Yeah we have Harbor Freight (my husband's favorite store!)... and I've seen the metric drillbit kits at Home Depot, but all I want is loose drillbits, and they sell them singly in standard measurement, but not in metric sizes. I don't want a whole kit! I'm only going to use 1, 2 at the most!

Andria

 

[Hans Wermhat]

Maybe try a small mom & pop hardware store? Or just get a coiling jig. They are under $5 these days. I have one of the stepped ice pick looking jigs. It works well though it's kind of a pita to hold the wire and get the first wrap started.

 

[AndriaD]

Maybe try a small mom & pop hardware store? Or just get a coiling jig. They are under $5 these days. I have one of the stepped ice pick looking jigs. It works well though it's kind of a pita to hold the wire and get the first wrap started.

Think I'll just stick with my 3/32's and occasional 7/64's.

Andria

 

[evan le'garde]

First thing i reach for in the mornin is my Kayfun V4, 36mg, gotta get that nic.
By midday i'm sub ohm'in on a box mod with a decent dual coil tank at 9mg, 45 watts.
If i go out then usually i don't vape, but if i do, i'll take the Kayfun on my Provari.

Stealth vapin ?. If i'm not supposed to be vapin where ever then i don't.

 

[smacksy]

Because I like both flavor and sometimes in the mood to blow some serious clouds I have several setups I vape in rotation through-out the day.. All with different flavors to avoid flavor burnout. Lol

sent from my XT1080 via Tapatalk