Zorbas VW Module & Lernaia Hydra

[Spiralnebel]

Hi folks

This tube offers variable wattage between 7-18 Watts
to any 510 mod

Zorbas VW Tube | zerobacco.gr

Videos: https://www.youtube.com/channel/UCtxE70PN5yZRBel-tvBlaKw/videos?view=0

Dimi from VapeTeam will review it today

ordered one to try with my GGTS

 

[Spiralnebel]

Functionality

1. - All functions are controlled from the existing switch of mod and indications are read by a bi color LED.

2. - * Display and setting at 1Watt,from 6 to 18 Watt.

3. - Constant force throughout the discharge of the battery, regardless of the change in the ohmic resistance due to temperature.

4. - Display absence atomizer.

5. - ** Works with resistances 1-5 Ohm.

6. - Stops the operation and alert when battery discharge in a safe limit of 3.3V.

7. - The device with reverse battery, destroyed and have not warranty.

8. - Protection from shorted atomizer and protection from atomizer which shorts in during use.

9. - Stop after continuous operation of 15" from 6-11 watt and instant recovery., Stop after continuous operation 10" from 12-18 watt and instant recovery.

10. -The power supply connects directly the battery in the atomizer when the power from the battery is higher than the adjusted.

11. - Protection circuit against high temperature, shutdown.

12. - Keeps in memory, all settings and parameters without battery.

13. - Fits in all existing mechanical Mod with threaded 510.

14. - 2 years written warranty, replacement with new equipment, as long as there are no signs of tampering or intervention.

15. - Upgradeable ability of a new program,in the same model within the warranty period for free, (shiping costs for the customer).

* The power supply with the entry functionality, ie by pressing the switch of the MOD , measures the ohmic resistance of the atomizer and the battery voltage and calculates the watt.If watts is more than what you want, the power supply does not interfere to decrease but stay in inertia and the atomizer works directly to the battery, ie (transferred without lossless the battery voltage to the atomizer).If the resistance is 2,2 ohm and voltage of battery 4,2 volt then we have 8 watt . If the power supply is set to 6 watt, will act as a cable and outlet will take 8 watt.if set 9 watt or more, then the power supply begins to operate and automatically transfers in the atomizer 9 or above watt. In the event that the required power is less, operates as a switch and connects directly the battery in the atomizer. We must use resistors over 2,6 ohm, to get 6 watt power.

** The circuit is only boost, ie it can give an output voltage of the battery voltage and over.

This means that even a full battery 4,2 v, the output power will be V2 / R

If the resistance is 2 ohm we will be to 8.82 watt..So the boost will be start from 9 watt and up.

VPLive Vape Team on Location: Inside elCigArt - Makers of the Zorba.
https://www.youtube.com/watch?feature=player_embedded&v=lfZ1VW5zFjU

http://elcigart.com/en/product/zorbas

More comments and pictures by me will follow soon...

 

[Spiralnebel]

Zorbas on a GGTS with a 18350 and Ithaka with GGTS Base Adapter

Zorbas on a GGTS with a 18650 and Ithaka with GGTS Base Adapter

Zorbas on a GGTS with a 18650 and iAtty

Zorbas on a GGTS with a 18650 and Kayfun v3 and Clear Tank

Zorbas on a GGTS with a 18650 and Kayfun v3 and SS Tank

Zorbas on a GGTS with a 18650 and Diver in Trap Tank XL

 

[Toxik]

So what is the advantage vs using the kick?
Seems to have less functionality (no downstepping) and is bigger and more expensive.

But maybe I got somehing wrong?!

 

[Jabbathewocket]

I suppose the advantage is that it is external meaning it should fit anything with a 510 connector/battery type and not require space in the tube.. meaning you dont have to step down to say an 18500 in a 18650 tube and you can use the device with tubes aimed at 18350 batteries...

Granted most buyers of mods that use 18350s would not want to stick something this large on top but hey... who knows

 

[wolfstone5]

I once had an Irish Setter named Zorba!

 

[tomster64]

Could this work with a unregulated mod or just a mech? I have a e-pipe mod that I'd like 2 boost and this would look great on it.

 

[Spiralnebel]

Hi folks

I had the chance to try ElCigArts newest products at second german vape meet in Oberhausen

First of all the new Zorbas v2 with a variable wattage range from 6-22W (1-5 Ohm) and
reverse battery protection. They also made some changes in the design, like blue/red led.

It will be available with a diameter of 22 or 23mm, in a matte/satin or a polished finish
and the offer a GGTS adapter so can unscrew the bottom cap und make use of the new
telescopic center pole to put it flush on a GGTS I can tell you - It look & works stunning guys!

They also build a air flow control that can be screwed on top of Zorbas so you will not lose
the ability to control the air flow as you normaly do with the Full Ad Cap

And then they show me their new mod "Lernaia Hydra" which one can be used as a
mechanical mod or with Zorbas as a VW mod. It has a unique new button who do not
need springs or magnets and have a very short way to fire.

Here is a review they took at ECC...



All products will be available at: http://elcigart.com/en/all-products

 

[State O' Flux]

I'll go ahead and bookmark the Lernaia Hydra and Zorbas in the "Stuff I want but can't afford, or won't buy, but looks neat" folder. Thanks for the ElCigArts link Spiral.

 

[Thrasher]

reminds me of the "can" and "silencer" from nhaler. just more features and way more expensive with our exchange rates lately. but cool none the less.
The Silencer

 

[Spiralnebel]

Some more VapePr0n...

 

[souroull]

I want to try one, but hate the 510 connection. Any chance they made GGTS adaptors that will fit the threads of Ithaka/ody?

Also, what atty are they using that produces that mad mad amount of vapor that makes Phil choke?

 

[Spiralnebel]

Also, what atty are they using that produces that mad mad amount of vapor that makes Phil choke?

ITs just a matter of wattage and air flor. Very polular in the states right know seems to be the Omega RDA.
This rebuildable dripping atomizer have huge air holes and if you build sub ohm coils at about 0.6 ohms and
use low nic level liquid you can inhale it directly and fill your lunge with vapor till you can not inhale anymore
and then you will be able to make those atom bomb like clouds mate

 

[heatX]

ITs just a matter of wattage and air flor. Very polular in the states right know seems to be the Omega RDA.
This rebuildable dripping atomizer have huge air holes and if you build sub ohm coils at about 0.6 ohms and
use low nic level liquid you can inhale it directly and fill your lunge with vapor till you can not inhale anymore
and then you will be able to make those atom bomb like clouds mate

Do you know when the Hydra will be released? I am so stoked for this thing to come out.

 

[tomster64]

The Lernaia Hydra (full) with the Zorbas is 290 Euro or almost $400 it looks good but not $400 good

Functionality

1. - All functions are controlled from the existing switch of Mod and indications are read by a bi color LED.

2. - * Display and setting at 1Watt,from 6 to 18 Watt.

3. - Constant force throughout the discharge of the battery, regardless of the change in the ohmic resistance due to temperature.

4. - Display absence atomizer.

5. - ** Works with resistances 1-5 Ohm.

6. - Stops the operation and alert when battery discharge in a safe limit of 3.3V.

7. - The device with reverse battery, destroyed and have not warranty.

8. - Protection from shorted atomizer and protection from atomizer which shorts in during use.

9. - Stop after continuous operation of 15" from 6-11 watt and instant recovery., Stop after continuous operation 10" from 12-18 watt and instant recovery.

10. -The power supply connects directly the battery in the atomizer when the power from the battery is higher than the adjusted.

11. - Protection circuit against high temperature, shutdown.

12. - Keeps in memory, all settings and parameters without battery.

13. - Fits in all existing mechanical Mod with threaded 510.

14. - 2 years written warranty, replacement with new equipment, as long as there are no signs of tampering or intervention.

15. - Upgradeable ability of a new program,in the same model within the warranty period for free, (shiping costs for the customer).

* The power supply with the entry functionality, ie by pressing the switch of the MOD , measures the ohmic resistance of the atomizer and the battery voltage and calculates the watt.If watts is more than what you want, the power supply does not interfere to decrease but stay in inertia and the atomizer works directly to the battery, ie (transferred without lossless the battery voltage to the atomizer).If the resistance is 2,2 ohm and voltage of battery 4,2 volt then we have 8 watt . If the power supply is set to 6 watt, will act as a cable and outlet will take 8 watt.if set 9 watt or more, then the power supply begins to operate and automatically transfers in the atomizer 9 or above watt. In the event that the required power is less, operates as a switch and connects directly the battery in the atomizer. We must use resistors over 2,6 ohm, to get 6 watt power.

** The circuit is only boost, ie it can give an output voltage of the battery voltage and over.

This means that even a full battery 4,2 v, the output power will be V2 / R

If the resistance is 2 ohm we will be to 8.82 watt..So the boost will be start from 9 watt and up.

VPLive Vape Team on Location: Inside elCigArt - Makers of the Zorba.
https://www.youtube.com/watch?feature=player_embedded&v=lfZ1VW5zFjU

http://elcigart.com/en/product/zorbas

More comments and pictures by me will follow soon...

 

[sneakerpimp]

400.. lolz.

 

[Spiralnebel]

 

[Spiralnebel]

 

[Spiralnebel]

26:48-53:00

 

[Spiralnebel]

[

Just to clarify - There are no springs anywhere! Therefore no cleaning or maintenance