Eleaf IORE Crayon Kit is powered by a built-in 1000mAh battery with 15W max and USB Type-C charging. It has button and draw activation system to suit your preference. 2ml e-juice capacity, easy side refilling system and visible e-liquid check window. It features 0.8ohm mesh coil for MTL vaping. As though the small size, the large 1000mAh battery will provide enough power for your daily vaping!



Features:
1. Mesh Pod
2. Manual & Automatic Integration
3. Visible E-liquid Level
4. Easy Refilling as Always
5. Long-lasting 1000mAh Battery
6. Ultra Light and Compact
...

Click here for more:

IORE Crayon Kit: Eleaf IORE Crayon Pod System Kit

Hey folks,

What is the great news today? Sourcemore brings you the excellent vape kit-VOOPOO VINCI 3 Kit

VINCI 3 Kit is portable but dynamic, is 50 percent smaller in size and 20 percent lighter than the same type of device. It supports 2 days of vaping on a single charge with built-in 1800mAh battery when is fully charged. VINCI 3 Kit is the first puffing master device. It not only applies the Mobius Airflow System that can offer a wide range of airflow control from 100-3000Pa, but also features 5-50W adjustable power, you can obtain seamless vaping from tight to loose. VOOPOO VINCI 3 provides two ways to vape with a smart draw and fire button. Adopting the industrial most sensitive 1000Pa airflow sensor, Vinci 3 connects to users' puffing trip immediately, and the dual ignition makes the puff and operation much easier. The cartridge has 4ml e-liquid capacity, is compatible with all PnP coils, including RBA coil. VINCI 3 is the Pod Mod that brings smokers and Pod users the blasting vaping experience similar to Mod.

To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.

Example:
Sourcemore
Ejuice

If you draw a blank post like
'VOOPOO VINCI 3 Kit'
The next post will start with Letter 't'

Note:
1. One winner will be picked by random.org on Feb. 16th, 2023.
2. You must be over 21.
3. Number your entry, for instance: #Post 1.
4. Max 3 replies for each member.
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.
6. Due to the suspension of logistics, we are temporarily unable to ship to Ukraine, thank you for your understanding.

Hey guys

Im new to vaping bought a voopoo drag 4 kit which has Uforce L subohm tank that setup was fine,
Then i bought a new mod because its becoming a hobby so i bought the istick power 2C 160wattwat.
i rly like the look but when i use my tank only got 1 atm the Uforce L.
it wont sit flush theres a slight gap you can see light shining under through it but on the drag its flush..
Is my mod defective should i return? It was their last one tho and i rly like the look.
Its like it wont screw all the way down touching the mod i can slide paper under it even
I looked at manual it does say spring floating 510 so idk

Edit: made a picture my phone takes terrible pics hard to see looks worse IRL i can even see the thread of the tank if i hold it up to light and let light shine through, what should i do is it defective its flush on my other mod this tank is

We are introducing the best disposables designd by Elf Bar called Funky Republic. The following device has a lot of futures such as Battery indicator, E-juice indicator and much more!! Funky Republic has unique flavor and some of them similar as Elf Bar BC5000. If you are Elf Bar Fan you have to try the Funky Republic!!

This one of a kind smart disposable vape is extremely compact with the new latest tech all while holding a whopping 7000 puffs of unbelievably smooth flavor, thanks to quaq tech technology you will feel the difference in flavor and vapor production, The Funky Republic Ti7000 has a built in screen so you can Directly see the exact juice and battery level through the innovative built-in display window, take the hassle out of guessing and determining how much juice is left, preventing those harsh burnt hits.

Plus never have to worry about the battery running out because the smart Funky Republic Ti7000 is equipped with a built-in 600mAh Battery with the included USB Type-C charging cable, and is pre-filled with 17ml of 5%/50mg Salt Nicotine. This device requires zero maintenance other then a quick recharge once the battery finishes. The smart Ti7000 features no buttons and is automatically activated when you inhale. Integrating all of these amazing features, allows you the user to have an amazing hassle-free vaping experience.

More Details of Funky Republic Ti7000:
7000 Puffs
Smart Power Screen Display Window
Battery Indicator
E-Liquid Indicator
Quaq Tech Mesh Coils
Light Weight & Portable
Disposable Design - Draw Activated
USB Type-C Cable Included
Rechargeable 600mAh Built-In Battery
Pre-Filled 17mL E-liquid
50mg
Anti Leak Technology



Recommended products:
tres leches e juice
coastal clouds mango berries

I have the vapelyfe Mod from probably 10 years ago. Brass hybrid mech mod. The serial number, 027, is etched on the tube not the button like every other one I've seen online. I paid a decent amount new but was wondering if anyone had any idea how much it's worth of anything. I can post a pic after I clean it up some. Been sitting for a while Don't want to embarrass myself.

Not such a curious case because Im almost positive it went down the drain, but it is gone. Does anyone know where I could get a replacement insulator the one that goes around the 510 pin for a dead rabbit v3. I have a wasp nano and a nightmare but neither fits and I don't wanna shave em down and then those not function please help. I have messaged hell vape but I'm not very enthusiastic about them sending me a replacement!

Hello everyone! I have some questions regarding the smoothest NIC base and VG currently. A little on my background, and to help understand what I am looking for. I was a customer of Gremlin Juice from 2013 until they sadly closed up. Rich and the Gremlins provided some of the best customer service around, and I vaped his Vanilla Custard 24/7. After he closed I began using Capellas VC #2 as my flavoring, and mixed it with a 3MG Nic VG I got from LiquidNicotineWholesalers (a direct recommendation from Rich himself). It was perfect, everything I was looking for. I bought two gallons of the VG from LNW, when they announced they would no longer be shipping residential, and it lasted me up until just recently.

I began searching for a supplier, and came across Central Vapors, and placed an order for a 120ml of NIC base and 1 gallon of their VG. When it arrived, it was incredibly harsh, burning my throat terribly, and it also made my juice a very dark shade of yellow the moment it was mixed, which was not normal at all. I contacted them, and they exchanged my order for me. Not sure if it was the VG or the NIC base that created these issues, I filled a tank with just the VG and a little flavoring, and it was very smooth, and did not make the juice so dark. I chalked my issues up my having received a bad bottle of VG, and I mixed the NIC base and VG for a second time. It made my juice very dark again, but it was much smoother than the first order. However, I have burned through a few tanks now, and it is still more harsh on my throat than I'd like, and the flavor profile is off from what I am used to.

Seeing now how difficult it has become for us to find a good NIC base and a nicely flavored smooth VG, and to try and avoid placing an order with every shop I am able to find, I am hoping some of my more experienced brethren on the ECF might have some suggestions.

At this point, I have to believe that it is the NIC base at CV, that might be a little harsher than I am used to. But, I will vouch for their customer service, 100%. Every person I have dealt with from CV was very friendly, knowledgeable, and most importantly helpful. It is a shame that it seems their NIC base does not appear to fit my personal needs. It's an even bigger shame that we are all being forced to go to such great lengths to fill our needs, while I could still go down and by a pack of analogues any time I please, something I 100% credit e-cigs with getting me off of 10 years ago.

Any help from any of you will be very much appreciated, I thank you in advance for any assistance you can provide!

Hello everyone, today I want to bring you a fresh disposable cigarette, aroma king legend disposable vape. Aroma king has always been committed to producing high-quality electronic cigarette products, and I think it is more or less reserved for some users. impression. I also hope that you can learn more about this device in the future.


This is a cheap disposable vape that meets the TPD standard. It provides 10ml of pre-filled e-liquid and 0mg of nicotine content, and the maximum number of puffs can reach 3500 puffs. Everyone also knows that such large-volume disposable cigarettes require objective battery life. This time, a 1500mAh built-in battery is provided, and the battery capacity is objective and can basically guarantee daily use.

Blueberry Pomegranate is a fruit blend that brings you sweet and sour pomegranate with juicy blueberries.

Strawberry Watermelon Bubblegum combines the taste of juicy watermelon and ripe strawberry, conveying a taste of bubblegum, mellow and enjoyable.

Mango Passion Fruit combines dual fruit flavours, conveying a sweet and sour taste, which makes people have an endless aftertaste of the double taste.

Enjoy your happy time with more vapes at uk online vape shop.

You may be interested in:
10k vapes
hyde retro rave

VAPORESSO LUXE XR - Flavor delivery through the COREX heating technology

BUY NOW! ELF Bar Ultra Disposable Device (5000 Puffs)
Key Product Features:

• 5000 Puffs per Disposable
• E-Liquid Capacity: 13ml
• 650mAh Battery
• Mesh Coil
• Oil Conducting Fibers
• Metal Shell
• Food-Grade SUS404
• Nicotine Strength: 5% (50 mg)
• USB-C Charger not included

VALENTINE'S SALE IS LIVE NOW!
USE COUPON CODE (LOVE) TO GRAB 14% DISCOUNT STOREWIDE TILL 14th FEB,2023

Im a huge vaping nerd especially the hardware lol i also dabble in DIY juices... anyway what is everyone most beloved mod they have ever seen or used?

I think the mod i want most and still do is the Lost Vape Thelema solo 100w quest or dna,reason i havent bought it yet is because reddit is full of topics with people`s lcd display breaking on them.
Im still debating if i should gamble and go for it?

Another one i rly like is the
Yihi SX Mini SL V2
cant find it in stock here in netherlands =/

if anyone kno mods similar to this let me kno lol
Whats yours?

Hey everyone!

Im new here just wanted to do a quick introduction,
Im a 34 year old guy from Netherlands,amsterdam been a smoker since age 16 but
im in the process of quitting smoking now and vaping became a hobby too!
So far its going great but its its only been a week!
I did quit before and also started vaping way back in 2013 it also was a hobby then and i was smoke free for a year but then something happened IRL and i fell back to smoking sold all my vape gear too even though i still loved it but that time of my life wasnt so good
,anyway im back for good!
Bought 2 mods so far voopoo drag 4 177w and istick power 2c 160w
Been very fun ive been thinking on buying the lostvape thelema quest solo 100w as well but reddit is full of people having problems with the lcd screen anyone know about it??
Im also learning about DIY juices since NL is getting flavor ban that is working out ok too!!!


Anyway thats long enough good to be back

Hey guys

I have a quick question
Is it OK to charge married batteries individually?
I use a charger thats single slot only ,so what i do is when im low on batteries i pop both out of mod and charge 1 battery take it out charge the other one, then when its all done then i put it back in the mod and vape thats still married right?
I think i read the same amount of cycles used and charged etc is what matters as long as you always use both together with same amount of discharge and charge cycles or something like that
Is this true?

Im also broke atm so i cant go buy a charger in 2 weeks i can but hopefully its ok

I have an ursa Nano pod with a maximum power of 18 watts, which I always use salt in. I wanted to know if I use a 0.6 ohm coil for this pod, can I use free base E-liquid?

Dear valued customers,

The brand new February is here. Are you going to buy new vapes?

Healthcabin is here to bring you guys our new round of promotion – February Sale 2023, with 3 vape deals in total. Take the chance to join us and save more on your favorite products!

A. 15% OFF Sitewide​

We’ve created a 15% OFF discount coupon code, which is available for your whole order. Let’s check it out!

Coupon info:

• Coupon code: FS15
• Date: 7th – 19th Feb, 2023(-0600 GMT)
• Retail Only
• Flash Sale products excluded

B. Giveaway – Free New Vapes​

Coming soon!

C. Vape Deal Links​

Here are some other useful links where you can find our best deals:

• Weekly Sale – Best price for new hot vapes with 17% OFF Coupon: WSHC
• Flash Sale – Ultimate cheap vapes
• Clearance – Extremely cheap vapes!

Please view the February Sale 2023 here.

If you are looking for a uniquely designed vaping product, then the voopoo vinci 3 pod kit might surprise you. It not only has an eye-catching appearance but also has practical functions.

As you can see, this pod vape kit has a sporty look. It adopts the latest generation of sporty design, and the overall appearance design is lively and dynamic yet very elegant and delicate, bringing you a new visual experience. It has a rectangular visualization window on the top of the shell, which is convenient for your observation and operation.

This pod kit is perfectly compatible with VINCI 3, and the pod can hold 4ml of e-liquid, which is enough for most people. You can freely adjust the power through the screw adjustment button on the top of the device, and you have 5-50 levels of power to choose from. This allows you to experience the pumping effects brought by different powers and enjoy different levels of fun in the same device.

As the latest and strongest generation pod kit, it can support ultra-precise automatic ignition. This allows you to start the device more conveniently and quickly, and achieve more convenient and quick suction. Of course, if you prefer manual startup, it's fully supported as well. It is equipped with a 1800mAh battery. The battery not only has a large capacity but also supports type-c charging, so you don't have to worry about power at all.

More attractive new products are in our uk online vape shop, you are welcome to choose.

We also want to recommend more boutiques for you:
best voopoo drag 4 uk
voopoo drag 4 sale hot sale

UK warehouse

What I want to bring you today is a disposable vape product made by SP2S, sp2s disposable vape. This brand was born in 2016 and produced the first electronic cigarette product. It is committed to creating a unique flavour that is popular in the market. And bring users a better vaping experience.


SP2S disposable vape is a 500mAh battery built with a 1.4ohm mesh coil to maintain a steady output from the unit. 2ml of pre-filled e-juice and 2% nicotine content are in line with TPD standards. And the highest you can go first is 600puffs, which lasts for about a week.

Bring you 6 flavours, Cherry Banana Milk, Watermelon, Mint, Strawberry Cheesecake, Passion Fruit, and Tropical Fruits. The taste of fruit, drink and menthol is mixed to bring you a variety of taste experiences.

Strawberry Cheesecake conveys a sweet taste of strawberry and cheesecake, which makes people feel unsatisfied.

Passion Fruit is a natural passion fruit taste, sour and sweet, making people's mouths water.

Cherry Banana Milk is a mixture of fruit and milk. The fresh fruit flavour is accompanied by the mellow taste of milk. The combination can be said to be very perfect.

You can easily find this device in the best online vape store uk, and of course, there are more products worthy of your attention, and I look forward to your harvest.

You may like:
geekvape b100 aegis boost pro 2
voopoo drag 4 kit uk

Check out VOOPOO VINCI 3 Mod Pod System, offering an internal 1800mAh battery, 5-50W output range, and uses some new additions to the PnP Coils Series. Constructed from durable zinc-alloy, the chassis of the Vinci 3 Mod Pod is lightweight and slim, making it extremely portable. Fitting neatly within the bookbag, purse, or pocket, the Vinci 3 does not sacrifice in the performance department, packing an 1800mAh battery inside the small chassis.

Holding up to 4mL within the refillable pod, the Vinci 3 calls upon the host of PnP coils to deliver flavorful MTL vaping or large clouds of flavored vapor via DTL vaping. Visually striking and with function to match, this is the next pod system that will make its way into your collection.

More Details of VOOPOO VINCI 3:
Dimensions: 101.3mm by 30.5mm by 21.6mm
Battery Capacity: 1800mAh
Wattage Range: 5-50W
Voltage Range: 3.2-4.2V
Resistance Range: 0.15-3.0ohm
Chassis Material: Zinc-Alloy
Charging: Type-C Port
Operation: Button-Activated
Pod Series: Vinci 3 Pod
Fill System: Top Fill
Pod Material: PCTG
Pod Capacity: 4mL
Pod Connection: Magnetic
Coil Installation: Press Fit
Coil Support: PnP Coils
Supports MTL to DL vaping
Mobius airflow system
5-50W adjustable wattage
Ultra-precision auto-ignition



Recommended products:
blood orange mango e juice
coastal clouds peach tea e liquids

VOOPOO Argus XT Kit with UFORCE-L Tank

Argus XT New Kit is composed of Argus XT Mod and UFORCE-L Tank. Argus XT Mod supports single external 18650/21700 battery that matches the max powers from 80W to 100W. Powered by GENE TT 2.0 Chip, it can switch matching powers automatically and support Smart, RBA, Turbo and TC vaping mode. It also features IP68 rating tri-proof function, 3A Type-C fast charging and humanized QS lock. UFORCE-L Tank features 5.5ml capacity and easy top filling. It is designed with 3-hole top air inlets to deliver the balanced & sufficient airflow and avoid condensate & e-juice leakage effectively. The 360° adjustable airflow can also customize your favorite flavor. By adopting the innovative 510 base with heatsink design, it is easy to clean. It is equipped with PnP Coil 0.15Ω/0.2Ω with Dual In One Tech in the package to bring you richer taste, denser cloud and longer lifespan. It is also compatible with all PnP Coils including RBA Coil. Just get it.

Details:
1. Holeless appearance and leather-metal mixed material
2. Designed with lanyard rings, convenient to carry
3. Turbo mod for extreme boosting vapor experience
4. Single external 18650/21700 battery with Type-C charging
5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
6. IP68 rating tri-proof function, durable in use
7. Humanized QS lock to avoid accidental igniting or switching
8. Seven safety protections to guarantee the safe use
9. Triple air inlets to balance airflow and tasteful flavor
10. Top to bottom airway to isolate condensate and prevent leakage
11. 360° airflow adjustment to customize your favorite flavor
12. Innovative 510 base with heat sink design
13. 5.5ml capacity, easy top filling
14. Adopts PnP dual in one tech
15. Compatible with all PnP Coils




VOOPOO Argus MT Kit with UFORCE-L Tank

Argus MT New Kit is composed of Argus MT Mod and UFORCE-L Tank. Argus MT Mod comes with 3000mAh built-in battery and 5V/3A type-c fast charging. Designed with IP68 rating tri-proof function (water-proof, dust-proof, drop-proof), it is loyal accompany fearless of any extreme environment or scenario. Powered by GENE.TT 2.0 chip, Argus MT can provide multiple modes, such as Smart, RBA, Turbo and TC. There are no needs for you to worry about accidental igniting or switching in your pocket with QS lock button. UFORCE-L Tank features 5.5ml capacity and easy top filling. It is designed with 3-hole top air inlets to deliver the balanced & sufficient airflow and avoid condensate & e-juice leakage effectively. The 360° adjustable airflow can also customize your favorite flavor. By adopting the innovative 510 base with heatsink design, it is easy to clean. It is compatible with all PnP Coil. Just get it.

Details:
1. Built-in 3000mAh battery with 100W max
2. Adopts 3A Type-C fast charging port
3. GENE.TT 2.0 chip, QS lock design
4. Smart, RBA, Turbo and TC Mode available
5. Ingenious crater leakage proof structure
6. IP68 rating tri-proof function
7. Designed with dust-proof cover
8. BMS real-time battery protection
9. Multiple protections for safe use
10. 5.5ml capacity, easy top filling
11. Compatible with all PnP Coil
12. Supported by PnP dual in one tech
13. Triple air inlets to balance airflow and tasteful flavor
14. Top to bottom airway to isolate condensate and prevent leakage
15. 360° airflow adjustment to customize your favorite flavor
16. Innovative 510 base with heat sink design

Product: VAPORESSO XROS 3

Hello and welcome back for another review by yours truly. This time I will be taking a look at the Voopoo Vinci 3 that was sent to me by Voopoo in order to provide you with a fair, honest, and hopefully informative review. The Vinci 3 is obviously the third rendition of the Vinci series of pod mods. This one is quite a bit thinner and very much reminds me of pod mod from another manufacturer that I reviewed last year. However, Voopoo has put their own spin on it with some different features and designs. It is made from zinc alloy and carbon fiber so has a nice weight to it. It contains an 1800mah internal battery for what seems like long battery life and is adjustable from 5-50 watts. It also has a display screen on one side. The Vinci 3 has what they are calling a Mobius airflow control which is basically a turn wheel that protrudes from both sides of the mod. The airflow rating is from 100-3000 Pa. It can be button fired or used in auto draw. However, the airflow will need to be tightened up some for more of an RDL or MTL for the auto draw to work correctly.





WHAT’S IN THE BOX?

1* VOOPOO VINCI 3 Mod Pod Device
1* VOOPOO VINCI 3 Empty Cartridge 4ml
1* PnP-TW30 0.3ohm Coil
1* PnP-DW60 0.6ohm Coil
1* User Manual
1* Type-C Cable

SPECIFICATIONS:

Size: 101.3*30.5*21.6mm (with cartridge)

Power Range: 5-50W adjustable

Capacity: 4ml

Resistance Range: 0.15-3.0ohm

Output Voltage: 3.2-4.2V

Battery: Built-in 1800mAh

Material: Zinc Alloy + Optical Coating Decorative Sheet

Standard Coils: PnP-TW30 0.3ohm Coil, PnP-DW60 0.6ohm Coil

Compatible Coils: All PnP Coils

Charging: Type-C charging

Color: Carbon Fiber Black, Aurora Red, Carbon Fiber Blue, Aurora Blue, Rose Gold

FEATURES:

1. Supports MTL to DL vaping

2. Mobius airflow system

3. 5-50W adjustable wattage

4. Ultra-precision auto-ignition

INITIAL THOUGHTS:

The packaging for the Vinci 3 is simple but nice. The front has of course the Voopoo and Vinci 3 names in white against a blue background that reminds me of a laser light show or something. It also has a clear viewing window which I like very much so you can see the actual device inside. The back side of the box has the contents list as well as the usual company information and warnings.

The box for the Vinci 3 is opened from the end. The plastic tray holding the device slides out and the accessories and user manual are located under the tray. I personally don’t care for this type of packaging because when you slide the tray out then some of the contents underneath are going to fall out normally. What Voopoo has done to combat this is to put the user manual and all accessories in a clear plastic pouch that must be torn open to remove the contents.

The Vinci 3 kit comes with the .3 ohm coil pre-installed in the pod which is rated for 28-36 watts. The second coil included in the accessory pouch is a .6 ohm coil rated for a maximum of 23 watts according to the writing on the foil pack containing the spare coil. Also included in the kit is a USB-C charging cable to charge the 1800mah internal battery as well as the user manual.

The Vinci 3 has the Voopoo Vinci name printed on one side with the airflow adjustment wheel protruding near the top of the body and a clear viewing window above that which allows the user to see part of the clear pod to monitor the liquid level. It basically allows the user to see the lower half of the pod so when the liquid level nears the bottom of the viewing window then it’s about time to refill the pod. The opposite flat side has the other side of the airflow adjusting wheel which also has the + and – signs so the user can tell where the airflow is set by looking at where the larger tab on the wheel is positioned. Also on this side is the fire button which has a couple different functions. The Vinci 3 can be button fired or can auto draw fire. However, I have found that I need to tighten the airflow quite a bit for the auto draw fire to function properly. The Gene AI name is printed near the bottom indicating the chipset used in this model.

One side of the V3 is marked “Sample” on the one I received but of course will not when you receive a production model. In the picture on the left you can see that this is where the USB-C charging port is located as well as the airflow inlet openings which are a series of four different sized slotted holes. The airflow slots are identical on both sides. The picture on the right shows the location of the display screen also. I will cover the display and functions shortly along with a picture.

The display screen for the V3 shows the following information when at idle.

• Battery level percentage
• Set wattage
• Puff counter
• Coil resistance

While pressing the fire button then the screen changes the display and shows the following information.

• Total puffs
• Duration of current puff
• Accumulated vaping time in minutes

The button functions for the V3 are as follows:

• Short press the fire button 5X to turn the device on
• Press the fire button 3X and the wattage will flash. From there press the fire button to scroll the set wattage. Once it reaches the top limit then it will round robin to the low setting and climb again. You can either press the button multiple times or press and hold it to fast scroll. Once the desired setting is reached then the display will stop flashing after 5 seconds.
• Press the fire button 5X to enter the menu while the device is on. From there you can choose between button lock (unit only functions with auto draw), Puff clear, or Power off. The V3 does not turn off by pressing the fire button 5X. It only turns it on. To power off, this must be done from the menu.

The 4ml pod for the V3 is a top fill pod like many other smaller pods I’ve seen. You simply push the mouthpiece to one side and the mouthpiece comes off allowing you to fill the pod without removing it from the device. However, the way the viewing window is set up on this device it’s a little hard to see the liquid level until you get almost all the way to the top when filling.

I very much like that the body of the pod is clear allowing you to see the liquid level very easily. The coil that comes pre-installed has a safety seal over it so that it isn’t accidentally fired before filling the pod. This is especially a good idea since this one is button and auto draw fired. There is a rubber gasket over the fill hole and a smaller vent hole on the opposite side. The coils are a simple push in style and due to the pod opening design on the mod the coil needs to stick out quite a bit from the base of the pod.

The pod opening on the device has two magnets as does the bottom of the pod to hold the pod in securely. The spring loaded contacts in the opening are inset fairly deep which is why the coil must protrude quite a bit as I mentioned in order to make contact with the pins. It’s a little hard to see in my picture but the auto draw airflow inlet is at about the ten o’clock position and is raised.

FINAL THOUGHTS:

The Vinci 3 does have some really nice features for such a small pod mod. The 1800mah internal battery seems to last a very long time with the included coils. There was some difference of course between the number of puffs on the .6 and .3 ohm coils but they can be run very close to the same output where it isn’t a huge difference. The Mobius airflow control is a nice touch to have an airflow control on a small device like this is truly a plus. That being said, the way the airflow control wheel sticks out on both sides of the mod takes away from the hand feel and comfort of holding it in my opinion. The liquid viewing window is a good idea and I do appreciate the effort in the design. It really only exposes about the bottom half of the pod so when you get in the center of the viewing window then it’s time to start thinking about filling the pod again. That leads to one more thing that I didn’t really care for. Yes you can remove the mouthpiece and fill the pod without removing it but you really can’t see the liquid level until it gets very near the top since very little of the pod is exposed above the body. Please remember that these are my personal preferences and others may have different opinions. It is nice that the Vinci 3 has variable wattage output and even though it doesn’t have a + and – button, it does scroll through the numbers rather quickly so it only takes a few seconds to adjust the output. I didn’t really care for how it restricts the output depending on the coil resistance. I started using the .6 ohm coil around 20 watts and worked it up. I knew that it said it was 23 watts max but felt like I still needed more output with this coil but it would not let me go above 23. Instead it went back to 6 watts. Most larger Voopoo devices have an rba mode that lets you set what you want and wish this one had it too because even at 23 watts the vapor from the .6 ohm coil was too cool for me.

The .3 ohm coils was better running at 35 watts with the airflow about 1/3 to ½ open. It provided a bit warmer vapor. Both the .6 and .3 ohm coils produced plenty of vapor. However, I found both coils lacking in the flavor department. I have used many PNP coils and have come to expect pretty good flavor production from them but honestly that was not the case with them on this device. I hate to say this but if I was going to rate the flavor production on the Vinci 3 then I’d probably give it a 6.25 out of 10. It has to be the device since I’ve used these coils on other devices with good results. I tested the .3 ohm coil with Dinner Lady Blackberry Crumble and used Lemon Tart on the .6 ohm coil. In both cases I felt like the flavor was muted compared to other devices I have used these same liquids on.

I felt like the auto draw on the Vinci 3 was similar to other Voopoo devices I’ve tried in the past. Either I had to draw very hard or tighten the airflow control down to ¼ open or less in order to get it to work correctly. A lot of their small pods have great auto draw function but for some reason on the larger devices it has been lacking and needs some work.

I’d like to thank Voopoo and Nical for sending the Vinci 3 for this review. Thanks also to the readers. Below is a link to the website for your viewing pleasure.



VINCI 3-VOOPOO VAPE Spark Your Life

BUY NOW! VOOPOO DORIC 20 SE POD KIT
Features:

• 2ml Vape Juice Capacity
• 8-18W Output
• 1200mAh Internal Battery
• Compatible with VOOPOO ITO Cartridge
• Side-filling System
• ITO Platform Technology
• MTL Vaping
• 10 Day's Vaping in One Cartridge
• Anti-leakage Structure
• Draw-activated

VALENTINE'S SALE IS LIVE NOW!
USE COUPON CODE (LOVE) TO GRAB 14% DISCOUNT STOREWIDE TILL 14th FEB,2023