Today we have the new DRAG H40 which is the smallest device available at the entry-level POD MOD, whose maximum power of 40W enables advanced users to start their DTL vaping journey. Its 5ml e-liquid capacity and 1500 mAh battery capacity free users' worries over frequent e-liquid refilling and charging. The Dual In One tech adopted in the coil significantly boosts the atomizing efficiency. Adjustable in power and airflow, it can provide users with exclusive flavors and a unique DTL vaping experience. Besides, a 0.56-inch OLED display effectively records stats


Technical Specifications:

Color: 5 Color Options: Black, Gun Metal, Green, Pink and Snow Blue
Material: Zinc Alloy + Leather
Battery Capacity: Included 1500 mAh Battery
Output Power: 5-40 W Adjustable
Output Voltage: 3.2 V-4.2 V
Resistance Range: 0.1-3.0 Ω
2.Key Selling Points
1)Compact Size and Huge Capacity, Holding Long Hours of Vaping
Fitting neatly in the palm, DRAG H40 is a POD MOD that is small in size, yet boasts a comprehensive and deeply satisfying vaping experience. Its 1500 mAh battery and maximum 40 W power output make users worryless about running out of juice despite its compact size. The convenience of longer vaping time is made possible by DRAG H40's upgraded PnP POD II (bottom side filling) up to 5 ml e-liquid capacity, which also lessens the need for frequent refillings.

2)PnP Atomization Platform, Ultimate Taste Delivery
The Dual in One PnP coils has high atomization efficiency, perfectly and fully atomizing every e-liquid and delivering a rich flavor and delicate taste with bursting vapor. The test results show that the coil could atomize 35 ml (7 Pods) e-liquid. There are 2 modes for power adjusting: RBA and SMART. The former allows vapers to customize the power from 5 W to 40 W, and the latter will smartly work out a proper output power based on the present coil's resistance, smart and economical.

3)Rotate Pod to Adjust Airflow, Freely Get Airflow You Want
The 360° stepless pod rotational airflow adjustment makes it free to obtain the desired airflow without any other step. There are 2 air inlets that are designed stepless, which means users can freely get the airflow they want. This design brings users the free switch from MTL to DTL and a premier experience.
4)360° Exquisite Leather Facing, Full Upgrade in Holding Comfort

As the new member of the DRAG POD MOD Family, DRAG H40 continues the classic debossed and cylindrical design of the DRAG series. The top layer of leather firmly beds the device, delicate in look and comfortable to touch.

Also the new CMFs of the H80S and E60 will now be available with the upgraded PNP Pod II which IMO is far better than the original PNP pod tank. It also is the newest memeber of the same family of Drag pod mods like the PNP-X, Drag X and Drag Pro as well as 6 other mods which is nice and offers a bit of interchangeability within the ecosystem.

My thoughts:

Its tiny which if you have smaller hands like myself is nice as its not ungainly and is easily hidden but puts out enough cloud to put some bigger mods like the LUXE XR MAX by Vaporesso to shame even at half the max wattage of said kit. I will say it would be a little harder to use with the wattage buttons if you have bigger hands but the fire button is nice and big and with quick charge capabilities it charges from 0 to 100 in about an hour or so which is nice. I got the gunmetal color which is actually very visually pleasing.

The takeaway:

This new Voopoo pod mod is top of the class IMO and i absolutely love it

So today the Zovoo Dragbar B6500 Disposable, offering a 13mL prefilled eLiquid capacity, 5% nicotine concentration, and 6500 puffs from an upgraded mesh coil.

Technical Jargon:

ZOVOO Dragbar B6500 Disposable Features:
• Prefilled Capacity: 13mL
• Battery Capacity: Integrated Rechargeable
• Max Puffs: 6500
• Nicotine Strength: 5% (50mg)
• Operation: Draw-Activated
• Heating Element: 1.0ohm Mesh Coil 2.0
• Charging: Type-C Port

Available Options:
Blue Razz Ice | Clear | Cool Mint | Honeydew Watermelon | Kiwi Pitaya Berry | Lemon Pie | Lime

My thoughts:

Its a cool little device similar in size and shape to the Elfbar almost to the millimeter which means its pocket friendly and i started eith the strawberry ice cream flavor that was sent to me by Zoovoo and it offers a great throat hit and tastes on point with strawberry ice cream like the one froom Hood ice cream out of Massachusetts. I personally love it. However as a 0 nicotine vape juice user it really pisses me off that its 5mg otherwise i would vape it all day as its and amazing flavor.

The takeaway:

If youre looking for a disposable vape that tastes exactly like its name suggests look no further. However if youre looking for a disposable vape with 0mg that fits the other points unfortunately like me, youll have to keep looking.

Psychomod KBR-X boro mod with UN Team panels
21700 DNA60 boro mod
No stock panels. Case, flush nut and battery wraps included.
$325 shipped in the US

Login to view embedded media

Joyetech EVIO Grip Pod Kit is a stylish, pocket-friendly, easy-to-use higher quality pod system, perfectly suited to a beginner just starting out. Showcasing an impactful pod design, with a ultra compact, smooth rounded shape and included lanyard easy hands free portability.

Brand: Joyetech
Size: 45x20x75mm
Battery Capacity: 1000mah
Pod Capacity:2.8ml
Output Wattage: 20W max
Charging Current: USB-C (5V/1A)

Click here for more:
Joyetech EVIO Grip Pod System Kit: Joyetech EVIO Grip Pod System Kit

I’m considering making my own ejuice and I don’t really know what sites I can trust. Are there suggestions for websites to order from?

I recently had the opportunity to try out the Aspire Flexus AIO Kit, and I must say, I was thoroughly impressed with its performance and versatility. Aspire has always been known for delivering high-quality vaping products, and the Flexus AIO Kit is no exception.



First and foremost, the design of the Flexus AIO Kit is sleek and ergonomic. It fits comfortably in the hand and has a premium feel to it. The device is compact and portable, making it perfect for on-the-go vapers. The build quality is top-notch, and I didn't experience any rattling or loose parts, which is always a plus.

The highlight of this vape pod kit is its versatility. It comes with both an AIO (All-In-One) pod and an (Rebuildable Dripping Tank Atomizer) option. This means you can enjoy the simplicity of pre-made coils and easy refilling with the pod, or switch to the RDTA to customize your vaping experience and create your own coils. Having these two options in one kit is a game-changer, especially for vapers who enjoy experimenting with different setups.

The flavor and vapor production of the Aspire Flexus AIO Kit are outstanding. The included coils deliver a clean and intense flavor, and the adjustable airflow allows you to fine-tune your vaping preferences. I particularly enjoyed the RDTA option, as it provided a more robust and personalized vaping experience, and the build deck was user-friendly for coil installation.

The battery life on the Flexus AIO Kit is impressive, thanks to its built-in 2500mAh battery. It lasted me throughout the day with moderate to heavy use, and the USB-C charging port ensured quick charging times, which is a huge convenience.

The kit also includes a range of safety features, such as short-circuit protection, overcharge protection, and overheat protection, which adds peace of mind while using the device.

One small downside I noticed is that the pod capacity could be a bit larger, as it required frequent refills, especially when using the RDTA. However, this is a minor issue compared to the overall performance and features of the kit.

In conclusion, the Aspire vape Flexus AIO Kit is a fantastic option for both beginners and experienced vapers. Its versatility, excellent flavor, and vapor production, coupled with its user-friendly design, make it a standout in the AIO market.

Whether you're looking for a convenient pod system or a customizable RDTA experience, the Flexus AIO Kit has got you covered. I highly recommend giving it a try if you're in the market for a reliable and versatile vape shop.

Related kits we recommend:
lost vape ursa pocket for sale
vandy vape pulse v3 mod in stock

Nicotine-free vape, which has recently gained popularity in the market, has also been released by Sfog, a leading brand. 18ml of pre-filled liquid, up to 9000puffs of energy, rock and fashion shape, and more healthy zero nicotine content, all make it popular with smokers.


Features
• 18mL Pre-Filled E-Liquid
• 0%(0mg) Nicotine
• Rechargeable
• Approximately 9000 Puffs
• 950mAh Rechargeable Battery
• 1.0ohm Mesh Coil
• Air Adjustment Function
• Draw-Activated
• Aluminium & PCTG Material

Sfog Big Bang Nicotine Free Vape is made of Aluminium & PCTG Material, which is lighter and more durable. Even after several months of repeated use, it is still the same as new. The 950mAh Rechargeable Battery with a 1.0ohm mesh coil makes the blow more powerful and pure. Support airflow adjustment, only need to draw can be activated to use, so that the enjoyment process is more simple and personalized.

Have to mention the rich taste of the e-liquids, which is zero nicotine added, which is the future trend of vapes. Not only is it healthier for people who want to quit addictive nicotine, but it's also kinder to those around them who don't have to worry about second-hand nicotine. If you want to try this product, we recommend the best nicotine free vape, which has a wide selection.

Related product recommendation:
elf bar nicotine free
funky republic ti7000

ENE Crystal Legend Disposable Vape, a revolutionary vaping device that offers an impressive 4000 puffs for an extended vaping experience. With a sleek and compact crystal design, this disposable vape is not only high-performing but also stylish and convenient to carry.

The prefilled E-Liquid Pod Tank has a capacity of 2ml, ensuring you have plenty of e-liquid to enjoy your favourite flavours. Thanks to the draw-activated feature and mesh coil, you can enjoy smooth and satisfying hits with each inhale.

Powered by a built-in 1500mAh battery, the ENE crystal legend best disposable vape sale lasts power throughout your vaping sessions. The added RGB light adds a touch of vibrancy to your vaping experience.

Choose from an array of delectable flavours, including Apple Peach Pear, Fizzy Cherry, Berry Lemonade, Sakura White Peach, Gummy Bear, Cherry Ice, Blueberry Sour Raspberry, Strawberry Raspberry, Skittles, Kiwi Passion Fruit Guava, Energy Drink, Cola Whiskey, Cotton Candy, and Pink Lemonade Fizzy Cherry.

Experience convenience, style, and a burst of delicious flavours with the ENE Crystal Legend Disposable Vape. You can totally enjoy your day at vape shop online uk.

You may be interested in:
aspire flexus aio pod kit
ego aio 2 pod vape kit uk

Hello again ECF! Innokin was kind enough to send out their new Klypse Zip pod kit along with their new Endura S1 pod kit for review. Today we'll be focusing on the Klypse Zip. For those of you that are unfamiliar with the original Klypse pod device, I did a review for it back in May of 2022 which can be found here. The original Klypse won several awards in many different vape competitions due to the innovative and hygienic nature of its design. You can expect much of the same in the new Klypse Zip with a few things changed around - most noticeably, the form-factor and ability to use multiple different resistances including a pre-filled pod option. This review will take a closer peek at the changes that have been made allowing you to decide which Klypse device is better suited for your needs.

I want to thank Alisa (@Innokin_timmy) and Innokin for providing the Klypse Zip for this review. As a reviewer, this critique will be conducted in a fair and honest manner. I encourage you to go over and visit Innokin's site to find out more about the Klypse Zip, original Klypse, and Klypse C1 pre-filled cartridges which are all fully compatible with one another.

Alright, let's take a looksie!

(photos can be clicked on for easier viewing)



• SITE OVERVIEW •

Colors Options:

> Scarlet
> Mint
> Indigo
> Charcoal
> Blush
> Purple
> Pearl
> Graphite




Key Features:

> Dust-proof Cap
> Great Price-Performance Ratio
> New 1.2Ω Refillable Mesh Coil Pod
> New 1.7Ω pre-filled Coil Pods (16 flavors)
> Compact Design




Specs:

Dimensions: 67.8 x 44.5 x 17.0 mm
Body Construction: Aluminum Alloy
Battery Capacity: 650mAh
Pod Capacity: 2mL
Wattage Range: Klypse Pod 1.2ohm (10W); Klypse Pod 0.8ohm (14.5W)
Coil Material: Mesh Coil
Resistance: 0.8ohm ~ 3.5ohm
Fill Method: Side-Fill
Light Indicator: LED
Activation: Auto-Draw
Special Feature: Dust-proof Protective Cap
Charging: 0.75A / DC5.0V USB-C Charging
Safety Features: Over-discharge, Short-circuiting, Overheating, and Low voltage protections
User Level: Suitable for both Beginners and Experienced Vapers


Package Contents:

1x Klypse Zip Battery (650mAh)
1x Klypse Pod (2mL / 1.2ohm)
1x Klypse Zip Protective Cap
1x Quick Guide



• REVIEW TESTING & OBSERVATIONS •

Intro:

I'm assuming the "Zip" part of the name comes from looking like a Zippo lighter when the cap is being used. It would have been pretty cool if the top cap hinged open like a Zippo. There was a point in time when Zippo lighters were the fidget spinners of the 90's. Regardless, you can simply make a hook and loop connector with a string using a knot at the top of the cap if you're concerned about losing the cap. That is one major difference between the Klypse Zip and the original Klypse - there's no magnet to hold the cap anywhere which is, in my opinion, what made the original Klypse so unique.

As you can see above, I received the Charcoal colorway. The specs only mention aluminum alloy for the construction material, but I want to make clear that there's both plastic and aluminum alloy used in the Klypse Zip which is pretty common for pods these days. The part you hold in your fingers when you vape has a nice aluminum feel to it with a solid matte black finish. I'm not quite sure what the knurling on the top portion of the body is for, but it has a nice matching aesthetic with that of the dust-proof cover.

The Klypse Pod:

I'm not going to go too far into the Klypse pod simply because the only discernible difference between this pod and the pod that comes in the original Klypse kit is the blue refill tab, instead of it being black. The minimum juice line, shape of the mouthpiece, and the airflow inlets are all exactly the same. If you're interested in knowing more about the pod, please check out my review of the original Klypse, here.

The pods have absolutely no problem staying in the pod mod even if you drop it. The magnets hold it in place very well. I would recommend pulling the pod out by squeezing the ends of the pod instead of by its sides, but whatever works best for you.

As I mentioned above, the blue refill tab on the pod tells you that you're using the newer Klypse coil pods that either come with a 0.8Ω coil or a 1.2Ω coil. This is shown in the top right photo above, listed at the bottom of the pod.

The refill opening is large enough to easily fit a 120mL Chubby Gorilla bottle nozzle inside of it, so no concerns there.

What kind of airflow does the 1.2Ω coil pod have? I'd categorize it in the slightly loose MTL bracket, very similarly to the 0.8Ω coil pod that came with the original Klypse kit. For those that are or were previous smokers, this would equate to about that of an unpacked cigarette.

How's the flavor output? Flavor output for the 1.2Ω coil pod that came with the kit is about on par with pretty much any other top tier MTL pod device available on the market right now. Absolutely no leaking what-so-ever in the 3 or so weeks I've had this device, and it's been stored right-side up and on its side for very long durations at a time.



Klypse C1 Flavor Options:

> Strawberry Watermelon
> Peach Ice
> Pink Lemonade
> Classic Tobacco
> Vanilla Custard
> Tangerine
> Mango Passion Ice
> Lemon Tart
> Mango Milk
> Jungle Juice
> Iced Cosmic
> Blueberry Bubble Gum
> Sour Berries
> Blueberry Grape
> Cherry Lemonade
> Rose Lychee

The Klypse C1 pre-filled pods come available in 16 different flavor profiles. These come in nic strengths of 2% (20mg/mL) and 0% (0mg/mL) and offer up to 600 puffs each. These pods use a 1.7Ω coil, so to maximize battery life, this would be your best option in terms of puffs per battery discharge.

I received a package of 2x Cherry Lemonade pre-filled pods and from what I can tell, 600 puffs is accurate enough. Again, I'm glad that Innokin was practical about this, because I keep seeing disposables and now pods offering up to 13,000 puffs per coil (the new Vaporesso Eco Nano) and I simply will not endorse that kind of false advertisement. It's 100% fake until proven otherwise.

A bit of a side tangent, but a big reason we look to Mooch when it comes to battery performances is because he's forcing battery companies to give true specs, or recommends people simply don't buy their products. I am cut from the same cloth and recommend the same - I cannot stand false advertisement and will call it out when I see it. I appreciate Innokin for being consistently accurate with their performance specs.

The airflow for the Klypse C1 pre-filled pods is very similar to the 1.2Ω refillable pod. I'd also put this in the category of a loose MTL.

The flavor profile from the Cherry Lemonade is quite good. I can taste both the cherry and the lemonade, and the inhale carries a strong mint/menthol kick. The exhale is where you'll pick up both the cherry and the lemonade. For a 2% nic concentration, I think this puffs pretty well.


• CONCLUSION •


(Pictured left to right: New 1.2Ω Klypse Pod, Klypse Zip, OG Klypse)

There really isn't anything I can speak poorly about when it comes to the Innokin Klypse Zip. When compared to the original Klypse device, we pretty much only lose the magnetic top which I was a bit surprised about, but it has been replaced with the potential for a lanyard. I think the magnetic top was probably one of the biggest reasons the original Klypse won so many awards in 2022 - it was just really convenient. I'm also wondering about the hole in the cap for people using it in really dusty/dirty conditions. I don't work in any conditions like this so I cannot attest to how resilient it is against dust/dirt, but I'm wondering if there might have been other options to still allow a hook for the lanyard w/out drilling a hole in the top. In time, I'm sure we'll hear about it if it becomes an issue. I believe Innokin thoroughly tests their products though, so I'm going to guess that they've already come to a positive conclusion on this.

With the release of the Klypse Zip, comes the new 1.2Ω coil pod as well as the 1.7Ω pre-filled C1 pod, both siblings being added to the Klypse pod family (along with the older 0.8Ω coil pod) providing you with a wider range of preferential use - you can use refillable pods or pre-filled. On the road, I've found both of these pods to perform very well over longer road trips, using lower wattages to provide a similarly tasteful vape as the previous Klypse. Regardless of which Klypse battery/pod mod you use, you have a few more options to choose from, now.

Would I recommend purchasing this if you already have the original Klypse? If you don't mind losing the magnetic top in exchange for a different, shorter form-factor. Both are great choices in their own way, and for a great price.


++ PROS ++

> Smol/very pocket friendly
> Refillable 0.8Ω/1.2Ω coil pods and 1.7Ω pre-filled pod options
> 16 different pre-filled pod flavors
> "Dust-proof" cap
> Leak-free
> Easy to refill
> Easy to set-up/operate
> 650mAh battery
> USB Type-C charge port (0.6-0.7A)
> Price-performance ratio
> Lanyard hook


- - CONS - -

> Only one coil pod comes in the kit


+- CONSIDERATIONS-+

> No USB Type-C charging cable in kit
> Coils not replaceable - whole pods gets tossed after use
> Lanyard hole in "Dust-proof" cap
> Loss of magnetized cap
> No pass-through vaping
> Draw variation is limited to a loose MTL


• Overall Rating •

9.0


And that's all folks! The Klypse Zip is truly a wonderful vape if you're looking for a new pod device. Whether you like to refill using your own juice, or are looking for a pre-filled option, the Zip has you covered. If I missed anything or you have any questions, feel free to leave a response or PM me. If you're wondering where you can purchase the Innokin Klypse Zip, you can find it here (not yet available as of this post), the refillable pods can be found here (3 pods/pack), and information about the pre-filled pods can be found here (I don't think they're available for purchase yet).

I want to mention again that my original post has been changed to reflect the corrections made to my original assessment of the OG Klypse pod battery. Both the Klypse and Klypse Zip pod batteries and all of the available pods are fully compatible with one another. Mix and match them as you please!

Again, I want to thank Alisa and Innokin for providing this product for review.

Thanks and happy vape hoarding!

Aegis Mini M100: heavy use for about a year. $20 OBO

Luxe XR Max: light use(1-2 weeks). Everything in the original packaging is included as well as 2 extra pods and 4 0.3ohm gtx coils. $50 OBO

Smok Nord 5: light use(1-2 weeks) everything in the original packaging is included. $30 OBO

Vaporesso iTank: light use 1-2 weeks. 3 5 packs of extra coils, 0.15ohm, 0.5ohm, and 0.40ohm. $40 OBO

Uwell Valyrian 3: very light use, 1-3 days. Comes with everything included in original packaging besides the 2 coils. 2 0.14ohm UN2-2 coils. $30 OBO

Zeus Tank: heavy use, needs a new coil. $15 OBO

$150 for everything OBO

Located in Asheville NC Login to view embedded media

Hello and welcome back for today's review of the 2nd generation of the Klypse device called the Klypse Zip. The Zip houses a 650mAh internal battery and uses disposable pods with a 1.2Ω in the kit and a 0.8Ω is available as well as prefilled pods of various flavors. There are no buttons or any type of adjustments to be had because wattage is pre determined by reading what pod is being used, airflow is auto draw only and is a comfortable semi loose MTL. I really liked the original Klypse and was excited to put the Zip through it's paces during testing, after looking at some information from the manufacturer I'll give you my findings of the Klypse Zip from INNOKIN.




COLOR CHOICES





IN THE BOX ( SHOWN WITH OPTIONAL PRE FILLED POD )

• 1 x Klypse ZIP Pod Kit (650mAh)
• 1 x Klypse Pod 1.2 Ohm Mesh
• 1 x User Manual
• 1 x Warranty Card

PARAMETERS AND SPECIFICATIONS


* Dimensions: 67.8mm * 44.5mm * 17mm

* Construction: Aluminum Alloy

* Pod Material: PCTG

* Charging: Type-C USB 5V/1A

* E-liquid Capacity: 2.0ml Pod

* Pods: Refillable, Non-replaceable 1.2 ohm Coil(10.0max)/0.8ohm mesh coil(14.5max)

* Resistance range:0.8-3.5ohm

* Coil Material: Kanthal A1 Mesh

* Filling Method: Side Fill Port

* Battery Specification: Internal 650mAh

* Output Current: 5.0 Amps Max

* Display: Concealed White LED (100%-30% Green,10-30%,yellow,less than the 10% Red)

* Airflow: Fixed 2X Side Holes

* Firing: Draw Activation Only

* Cut-Off: 10 Seconds


FEATURES


* Compatible With Refillable And Pre-filled Pods

* The new 1.2ohm pod prolongs battery and coil life

* A small, convenient cap clips into place protecting the mouthpiece from dust

* Unmatched price-performance ratio

* LED power indicator

* Premium quality and pocket-sized

* Lanyard compatibility for convenience on the go


POD COMPATIBILITY





PRE FILLED PODS ( OPTIONAL )





COMPACT AND LIGHTWEIGHT





DUSTPROOF CAP





1.2Ω MESH POD INCLUDED IN KIT





BATTERY STRENGTH INDICATOR LED LIGHT





FIRST IMPRESSIONS


Packaging is a standard box containing the device, one 1.2Ω pod, user manual and warning card. I wouldn't expect to see a fancy packaging box for the simple device the Zip is but would have liked to see 2 pods in the kit instead of 1. My preference of coils or pods with devices like this are in the 0.7Ω or 0.8Ω and I think the 0.8Ω pod should have been included but INNOKIN did send a twin pack of one of the disposable flavors being Blueberry bubblegum and I am glad they did because it is a great flavor.

Hello and welcome. I’m back today with another review for you on an Innokin product. I was sent the Innokin Endura S1 by Innokin in order to provide you with a fair and honest review. The Endura S1 is a refillable, rechargeable, disposable device. I’m not really sure I would even call it a pod device since it doesn’t have a replaceable pod and is really all one piece. The S1 has a pre-installed tank with a 2ml liquid capacity and an .8-ohm kanthal mesh coil to optimize battery life. The battery capacity is 650mah. I didn’t see a charging rate given for the S1 in the online specifications but the user manual gives a rate of .55A. I can see where this one might be a good option instead of buying prefilled disposables that can get quite expensive. The S1 is rated for 7000 puffs.





WHAT’S IN THE BOX?

1 × Innokin Endura S1 Disposable Pod Kit

1 x User guide





SPECIFICATIONS AND FEATURES:

• Tank Capacity: 2ml

• Dimensions: 18.5*101mm

• Battery: 650mAh

• Power Output: 3.6V

• Resistance: .8-ohm Mesh Coil

• Puffs: 7000

• USB-C Cable

• Refillable

• Greener Solution

• Cost Effective

INITIAL THOUGHTS:

To be honest, I knew almost nothing about the Innokin Endura S1 before receiving it. I thought it was just another standard pod device, but it is in fact a refillable, rechargeable, disposable pod device that is all one piece and the pod is not removable. It has a built-in 650mah battery and provides a constant output of 13.5 watts.

The packaging for the S1 is quite basic but Innokin appears to have kept with the recyclable materials used for packaging. The front of the box has a color picture of the S1, the Innokin and Endura S1 names near the top, the color version stated, some features, and a large warning that appears on the bottom of both sides of the box. The back side of the box states that it is for sale only in the United States. There is a contents list which is short because the only thing included in the box is the S1 device and a user guide. There is no charging cable or anything else included. They obviously want you to know that they are rating the S1 at 7000 puffs since it is printed on the front and the side of the box.

To remove the device, you need to cut the paper stickers located on each side at the bottom of the box. In the picture above you can see that the one on the left had been cut while the one on the right had not. Once these are cut then the tray can be slid out to get the S1 out of the package. The S1 is auto draw only so there is a sticker on the bottom of the device to block the airflow so it cannot be activated accidentally before filling. Once the sticker is removed then you can see that there is one air inlet hole in the bottom and a single LED light as well as the USB-C charging port. The charging rate listed in the user guide is .55A and I have a Klein USB tester and it reads .56A while charging which would be right on track with the specification listed.

As far as branding goes on the S1, the Endura S1 name is printed on the side with the flat surface and the fill port plug. The Innokin name is printed on the opposite side. I like that the S1 has a flat side on the face which makes it easy for me to orientate the S1 without looking at it. Where this comes into play is that the mouthpiece is flat and if I hold the S1 with my thumb on the flat side then the mouthpiece is aligned correctly to take a puff. You can see the shape of the mouthpiece in the third picture below.

The dark pod portion on the silver version that I receive is a little too dark in my opinion and makes filling without over filling a little difficult as it’s hard to see the liquid level unless held under just the right light. The pearl version I received has a clear pod section which I prefer and can fill with no issues. I commonly use 10 and 50ml bottles that use the same tip and had no issues fitting the bottle tips in the S1 for filling. Due to the positioning of the fill port, I found it a little difficult to fill the pod completely without spilling. It has a 2ml capacity and I’m guessing that the fill port position is taken into account when this capacity was given. In the user guide it is recommended to keep the pod at least 1/3 full for optimum performance.

The bottom of the S1 has a single LED light that indicates the battery level. I didn’t see in the user guide where it said what level of battery the light indicated but do know from use that it is green and then transitions to red which I took as an indication that it is time to recharge the S1. The guide says the red light will flash 10 times when recharging is needed but I charged once the light turned red since I didn’t want it to die while out and about. I did notice that the S1 got pretty warm while charging using a wall wart and my charging cable since none was included. The LED flashes red while charging and turns solid green once fully charged.

FINAL THOUGHTS:

The Innokin Endura has performed flawlessly while testing it the past couple weeks. The auto draw function has worked without error and the flavor and vapor production have been respectable for a device of this type.

I started out using the silver version with a mixed mint liquid that I commonly use for pods at work. It is a 15mg strength liquid and I got a very nice throat hit and surprisingly larger vapor production than my normal pocket carry device. I had gone through about five refills at the time of writing this review and expect the S1 to last quite a long time with this liquid since it has a low flavor percentage and has no added sweetener. Many people don’t think about this but sweet liquids and added sweetener can greatly affect the life of a pod or coil.

I used an RY4 Cream recipe in the pearl version. I immediately liked the pearl version better since it has a clear pod. It makes it much easier to fill. The RY4 mix is a sweeter flavor but does not have any added sweetener. I had my fourth refill in it while writing this review. I have not noticed any reduction in flavor or vapor production at this point. This might be needless to say, but I experienced no leaking while using either device. This makes sense as it’s pretty much a sealed unit. I did notice that the fill port plugs on these seem to be of better quality than I see on many pod devices and are easy to pull up to remove for filling.

I was honestly surprised at how long the battery seemed to last on these. I kept expecting the red light to turn on, but it stayed green for what seemed like quite a long time. I’m not normally a disposable user but feel like the Endura S1 is a happy medium between a disposable and an open system. It allows users making the switch from smoking to choose their own liquid flavors to use instead of being restricted to whatever the manufacturer makes available. One thing I don’t know and really didn’t see any indication of in the promotional material is if any part of the S1 can be recycled. Normally I wouldn’t even mention it but Innokin has become known for their recycling efforts.

Overall, the Endura S1 has performed well and have no problem recommending it if someone is looking for this type of device. I’d like to thank Innokin and Alisa for sending the Innokin Endura S1 samples for this review. Thanks as always to the readers and below is a link to the product page. Feel free to browse the Innokin website to view all of the quality products that they offer.

Endura S1 - Vape Pod | INNOKIN®

I wondered if there were any nonsmokers/nonvapers or smokers/vapers that would be willing to ask a nonsmoker/nonvaper, or heck, any smokers/vapers willing to discuss what the Naked 100 Tobacco series smells like, notably Euro Gold and Patriot. I make many of my own fragrances, and I am afraid that these juices make my homemade soaps/perfumes smell like cheap perfume. I'm in NY and am having trouble finding true unflavored, so it's either keep puffing away with the tobacco line or resort to disposables (which I don't care for because of multiple reasons and the effort would be self-defeating). What does the tobacco line smell like to you?

Hey guys, I've gotten the Wotofo Profile X RTA about a month ago and I'm wanting to know whats the best wicking methods you guys use on yours?

I've realized that the traditional methods don't work so good on this rta, my meshes keep getting burnt out in a few days. I'm using the nexMesh Extreme .16ohm 60-80W they read at .13ohms and I've started vaping them at 52-55watts using a Freshmint 70/30vg/pg juice.

The wicking method that I have installed currently is lots of cotton directly under the mesh and thinned and combed out ends with the bottom half cut out, I'm testing 2 variations of this at the same time, on one side I have it extremely thinned out and long with a low shoulder and the other side is a little thicker and shorter with a higher shoulder. After about 3 days I've noticed that the mesh is black on the thicker shorter side and its completely clean and new on the thinner longer side also I've only noticed bubbles coming out of this side(thinner side) and absolutely none on the other side.

Anyone has gotten the wicking method of this mesh RTA down completely?

The AMP BB is a new type of boro tank device (mod) from BP Mods which takes a vastly different approach to your standard borotank device.

CHAPTERS

00:00 - Intro and specs
02:00 - Close Up
09:00 - Vape
11:00 - Thoughts

Social Media - Vaping With Vic | Twitter, Instagram, Facebook | Linktree

Rumble - https://rumble.com/v30t6uq-the-dovpobpmods-amp-bb-well-thats...weird....html?mref=z0wfa&mc=kybb8

YouTube - Login to view embedded media

I like this mod

Im just curious has anyone ever liked a mod so much you end up buying another or more to have future backups?
Yesterday i walked into my local vape shop and what do i see?
I see they had 1 odin v2 left i right away bought it without thinking twice lol cause i kno this mod is currently sold out everywhere, but i already have a odin v2 its my fav mod tho maybe of all time even..
Anyway i couldnt believe my eyes as soon as i saw it.
Cause if i didnt it prob be very hard to get another one for at least a little while

Anyone else have done this with a certain mod they love?
I rly like odins form factor

SADBOY - STRAWBERRY JAM
Producer: USA
Longfill - 30/120ml
Once again I have the "sad boy" from juicyvapour. This time it's a strawberry jam formation, which according to the descriptions will not be just a regular jam, there are other flavours to be found in it. As is my habit, I always spy on the particular test item on the manufacturer's site, as well as on other major forum sites. The descriptions are very mixed, strawberry shortcake, sugar cookie, biscuit, jelly cookie, freshly baked butter sugar cookie and many other variations which doesn't really make the choice easy.
The smell reminds me of a strawberry lightly vanilla cake. A nice, not too strong, snackable cookie . The flavour is sweet strawberry with a bit of cakey support in the background, but not too strong. The strawberries are there, but not in a jam state, I would say sweet rather than sweet, it's like a jelly on top of the cake. The cake part is not so identifiable for me. I couldn't tell if it's sponge cake or biscuit, it's not obvious, but it's there and blends nicely with the fruit. The more I suck on it, the more it becomes clear that it's a sponge cake taller, without the chocolate. I know it's the umpteenth variation, but I think this is the one that it most resembles. That being said, what you get is a very pleasant strawberry shortcake, not too sweet, but quite tasty, perfect for all day use. Strawberries and others for steaming up, I'm impressed with the manufacturer's product, thanks for the opportunity to the guys at juicyvapour.

BUY NOW! Blaze Magna Disposable (7000 Puffs )

FEATURES:

• 7000 Puffs
• 5% Nic
• 14ML E-Liquid
• 550 MAH Rechargeable Device
• Variety Of Flavors

PRIME SALE
USE COUPON CODE (PRIME) TO GRAB 20% DISCOUNT ON E-LIQUIDS, COILS & PODS TILL 1ST AUGUST 2023

Our Brands​

• Smok
• Geekvape
• Vaporesso
• Voopoo
• Jam Monster
• Uwell
• Air Factory
• Humble Juice Co.
• Candy King and more

@Z-Lee , I must say it has been a pleasant experience. Fast Payment, good communication, what more can I say, just A+++

The Cue Vapor Cue Starter Kit is as the name suggests a pod device tailored to the smoker. Unlike the vast majority of other pods on the market though, this one is made from full zinc alloy which means...yup..its a heavy.

CHAPTERS

00:00 - Intro and specs
01:00 - Close Up
05:00 - Vape
06:00 - Thoughts

Social Media - Vaping With Vic | Twitter, Instagram, Facebook | Linktree

Rumble - Login to view embedded media
YouTube - Login to view embedded media