I wondered if there is something more robust than the pico? I saw there was one from Pipeline with stainless steel components but it seems that it is not produced anymore.

At the moment I still have the Pico v1 b. I like the look. But the cap for the battery is jumping of sometimes. The thread might be worn out. Also overall it doesnt look good anymore.

I wonder if I should go for pico v2. What do you think pico 1 vs pico 2?

Also is there something out there that is also so nice and small but maybe has higher quality materials?

Hello ECF,
Have 1 new in box Dovpo Topside Dual in GunMetal color, Includes Mod + 2 Squonk bottles in Kit
I'm new to the forum, but not to vaping or the online community, will provide references at request.
Will ship the item USPS first class in a padded envelope with tracking, If you would like priority mail that can be arranged if you cover the difference.
Payment: PayPal or Zelle
Price: $90 shipped

Ever since pod type vapes came out, I get curious from time to time and have to try whatever is new and innovative. The idea of a smallish and fairly discreet device does have some appeal. This time around I got myself a vaporesso luxe qs. It seems to be a somewhat restricted DL, I can get a pretty decent hit off it and it works ok for MTL as well. The only problem I found was the pod is kinda hard to remove, especially in the morning when my joints are stiff and don't want to do anything yet. So, I went and bought a Smok, yes I know what I said about Smok on another thread hahaha, RPM 40. It wasn't expensive and neither was the luxe qs. I can pull the pod much easier on the RPM but I don't care for the side fill hole at all. The plug is tedious to replace after filling because the actual fill hole is too tiny

The other day I placed a Molicel M35A 18650 3500mAh 10A Battery into my Efest Slim K4 Battery Charger and it immediately smoked the battery upon contact with the positive terminal. I always purchase batteries and chargers from 18650 Battery store and this battery was probably close to its end of cycle life. Charger still works fine but would it be a good idea to replace it ? I’m kind of taking it as a battery gone bad been vaping for a long time but have kind of neglected to educate myself a little better on batteries beyond the basics.

thx for help

If you've never heard of, or decided to purchase a Voltrove, you MIGHT want to read this review. This one is claimed to be a real flavor chucker, AND in either Single, or Dual coil mode, so we will just see about that. Hang on, buckle up, grab a drink, and enjoy the ride !!!!!

**Specs:**


* 304 stainless steel construction.
* 810 Wide bore, shorty Delrin drip tip.
* Easy to build on postless deck design.
* Glass straight tank = 4mL
* Glass bubble tank = 6mL
* Tinted glass on black RTAs won't peel.
* Removable AFC
* Keyed top cap


**What's Included:**


* 25mm v3 RTA (straight tank installed)
* Bubble tank section
* Spare o-ring/screw kit
* O-ring sizer

I decided to pick the 25v3, and a few juices from Joe over at Royal Vapes in the UK. I also decided to use 3 of his juices to test this RTA out, and I'll link to EVERYTHING in the "Linkage" section below the review.




Now NORMALLY I'd just "Blah, blah, blah", and gloss over the box, but this one, was a work of art ...




And, because Mark KNEW how hard these boxes in boxes can be to slide out, he included a pull tab ...








Included were an o-ring guide card, spare o-rings, and grub screws ..




Wait, where's the instructions, and what's a o-ring guide card ??




Even THOUGH there were NO coils, instructions, or tips and tricks included, the o-rings, grub screws, and driver were ABOVE average, especially the grub screws ....




I chose the Black over the Stainless, as the black came with tinted glass, that was almost reflective, and VERY hard to photograph. The 4ml flat glass came pre-installed, along with the spare 6ml bubble glass ...

I dont quite know where this one would go in the forum, I usually post in the reviews section but this isn't really a review, it's more of a look at Chemnovatic in Lublin, Poland.

This is a three-parter, with all three parts for Chemnovatic released on the channel today. It's a discussion on Nic Salts, nicotine in general, Chemnovatic as a company and other stuff that DIY vapers might be interested in.

All three episodes covering Chemnovatic are part of Vaping/Ecig101 Season 3, which is covering everything to do with e-liquids...

Login to view embedded media

I used Mountain Oak Vapors for years and stocked up before they stopped online sales. My stock is getting low and the closest physical store is about 10 hours away so not an option. I can't find any other eliquid I like as much. Anyone familar with MOV tobacco flavors have any suggestion of any similar alternatives? I used MOV Wrangler, (tobacco) Classic Country, (a RY4ish) Americano a (coffee tobacco) and occasionally Sunday Morning a natural extract (coffee tobacco), and a couple more tobaccos Gambler and Outlaw. The MOV liquids are so well balanced never to much of anything, always good for all day vape and never to sweet. The natural extracts were brutal on coils but I used them rarely.



I should point out that I'm a MTL guy and use the go to MTL type RTAs, Kayfun Prime and similar with cotton wicked single coils. Usually build 1.5ish coils at run at about 10 watts so my liquid is usually around 12 to 15 MG, average 50/50 pg/vg ratio.

When liquid is heavy VG and thicker I will thin it with a squirt of PG.



So many new MTL liquid is very strong salt and I find it to strong for RTAs even if they are MTL type. I'm guessing the high NIC salts are for POD type device? I am gathering a lot of liquid that will go to waste as I try to find suitable MOV alts.

Thanks for any insight.

Once again I welcome all of you back for today's review of the Tenet and Tenet Pod Kits from UWELL that were supplied to me from HealthCabin for review. Both of these kits are almost identical as far as vape features go but as you will see, are very different in form. I will say that both are really geared towards MTL vaping but you can get a tight RDL vape from them. Both of these use a internal battery ( TENET - 750MaH ) - ( TENET KOKO - 950MaH ) and use the Caliburn G and G2 coils. As always lets start out with some information on both devices then I'll give my feelings and findings on them in my review.







COLOR CHOICES








IN THE BOX - ( TENET )


1 x CALIBURN TENET Device

1 x CALIBURN G2 Empty Cartridge

1 x UN2 Meshed 0.8Ω CALIBURN G Coil(Pre-install)

1 x UN2 Meshed 1.2Ω CALIBURN G2 Coil(Spare)

1 x Type-C Charging Cable

1 x User Manual




IN THE BOX - ( TENET KOKO )


1 x CALIBURN TENET KOKO Device

1 x CALIBURN G2 Empty Cartridge

1 x UN2 Meshed 0.8Ω CALIBURN G Coil(Pre-install)

1 x UN2 Meshed 1.2Ω CALIBURN G2 Coil(Spare)

1 x Type-C Charging Cable

1 x User Manual

1 x Metal Lanyard






SPECIFICATIONS - ( TENET )




SPECIFICATIONS - ( TENET KOKO )




TENET FEATURES



* Vibration Feedback

* Internal Battery Capacity: 750mAh

* . Button Fire or Air Drawn Activation Options

* Compatible with G and G2 Pods

* Compatible with G and G2 Coils

* Materials: PCTG, Aluminum Alloy

* Pod Capacity: 2ml

* Top Filling System

* Output Power: Maximum 16W


TENET KOKO FEATURES


* 18W Output

* 950mAh Internal Battery

* G2 Pods

* G / G2 Coils

* Top-Filling

* Haptic Feedback

* PRO-FOCS Technology

* USB Type-C Charging

* Auto Draw Only


TENET BATTERY - ( 750mAh )





BUTTON LOCK FOR AUTO DRAW ONLY FUNCTION - ( TENET )

I've been vaping for... seems like over 10 yrs now and since moving to a smaller city I have no vaping pals anymore. Nobody to discuss vaping with and just can't do it on my own. Looking forward to everyone's insight and feedback.

All info is in the pics.

I received mine a couple of days ago, here's my take on it.
Lots of air, lots of power.
If you are a high power wattage vaper and want to do that with a Boro AIO this is for you.

The pros: 21700 battery. 2 amp onboard charging.
Dual coil deck and mesh deck included. Includes lots of extras.
The deck can be removed without emptying the tank.

The cons: Heavy.
No wattage adjustment in TC mode.
No TCR adjustment in TC mode, just Ni,Ti and SS.
TC does work but you better have some high power coils installed as the boost/preheat is high.

To sum it up, it works very well in wattage mode, TC not so much.

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This can be one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. Never use them outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous discharge rating (CDR), never let it get colder than 0°C or hotter than 60°C, and keep the plastic wrap and top insulating ring in perfect condition. Never use a battery that is physically damaged in any way.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This cell performs a little better than the Molicel P28A, which is expected if it is indeed a P28B rewrap. I cannot guarantee that this cell is a Molicel P28B rewrap but due to its appearance, performance, and some other info I cannot discuss, in my opinion this is a rewrap of the Molicel P28B. That cell is the all-around best performing 18650 we can buy in my opinion.

The P28B is not yet in production so these would be sample “pre-production” cells sent to Molicel’s customers for testing and feedback.

This cell’s internal resistance is a bit lower than the P28A so it runs a few degrees cooler at high power levels. At 10A they performed the same in my testing. At 20A the Epoch ran for about 3% longer. At 30A the Epoch ran for about 8% longer.

The Epoch’s delivered an average of 2758mAh. This is well above the P28B’s 2650mAh minimum capacity rating but below the 2800mAh typical capacity rating. This might be due to these cells being pre-production P28B samples and not fully tweaked yet.

The 40A rating of these Epoch cells is not a true continuous rating IMO. The P28B is rated at 40A in the one-page spec sheet but that rating is temperature-limited to 80°C. When the cell gets that hot you must stop. Since the P28B would reach about 100°C at 40A you must stop about 2/3 of the way through the discharge.

So while, technically, the 40A rating for these cells is accurate I am disappointed that there is no mention on the wrap that it’s not a true continuous current rating (which can be used to compare against other cells). Most applications will never run this cell continuously at such high power levels but I believe strongly in accurate, consistently set ratings. 18650BatteryStore contacted me though and said that the wrap will be changed to add a continuous current rating and list the 40A rating as temperature-limited. This is great news!

Since the Epoch 28B reaches about 86°C at 30A (down to 2.5V) I am giving it an estimated 25A continuous and 40A temp-limited rating.

This cell is double-wrapped, a good thing for durability, but Molicels are already a little bit larger than most other cells. That can make this Epoch a tight fit in some devices. I recommend testing their size before committing to a large purchase if other cells are already a snug fit.


18650 Ratings and E-Scores Table:


20700/21700 Ratings and E-Scores Table:


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch | creating battery and device tests | Patreon.

To see how other cells have tested check out this link: Links To All 21700, 26650, 18350, 18500 Battery Tests

Once in a blue moon, ummm, blue momo, you have a dealio with a super wonderful person, and my transactionals with @bluemomo were just that! Thank you so very much for helping me free up some closet space!

Hi everyone. I'm a new member to the forum but not new to vaping. I've quit smoking cigarettes 10 years ago and have been making my own juice for 9 years. I make vanilla bean ice cream and menthol. My fav!!

Hello folks its been a long while but is there a thread still open for HotRod's EjuiceCalculator?

In any case, if anyone is interested, I have it working perfectly now under CrossOver on Mac Ventura.

The SXK PSYCHOMOD KBR-S Style Boro Mod is powered by Evolv DNA60 Chipset with variable wattage from 1W to 60W and powered by 1 x 18650 battery (not included). The Boro Box Mod is made by PA66 with 3D Printing and compatible with BB / Billet Boro Tank.
More info PSYCHOMOD KBR-S AIO Mod clone By SXK
3D Printing
Material: PA66 (Polyamide 66)
Powered by 1 x 18650 battery (not included)
Powered by Evolv DNA60 Chipset
Compatible with BB / Billet Boro Tank
Variable Wattage: 1~60W.

QUICK LINK,Click Here

DNA60W>>Buy SXK PSYCHOMOD KBR-S Style Boro Mod 60W Evolv DNA60 Chipset
70W >>Buy SXK PSYCHOMOD KBR-S Style Boro Mod 70W

Vaptex Boxmo disposable vape is powered by a rechargeable 650mAh internal battery, featuring a 13ml vape juice capacity with 5% nicotine for up to 5000 puffs. The PEMT technology can deliver more flavorful vapor. Crafted perfectly to create an amazing blend of flavor by utilizing the 1.2ohm mesh coil, the patented AACT technology can help the disposable automatically heats and cleans e-juice.

Vaptex has been making massive in-roads in the vaping industry and has released quite a few disposable vape products over the last few years.Their latest, the BOXMO, is their largest boasting a 13ml pre-filled juice capacity.It is powered by a 650mAh battery that is rechargeable via USB-C and can deliver up to 5000 Puffs in total.

Vaptex has also introduced ‘Photo Etching Mesh Technology (PEMT)’ in the production of their mesh coils. This supposedly allows faster heat-up times through the more even and precise mesh.The Vaptex BOXMO comes with 50mg (5%) nicotine strength and is available in 10 different flavors.

More Details of Vaptex Boxmo:
Rechargeable 650mAh Internal Battery
13ml Vape Juice Capacity
5% Nicotine
5000 Puffs
1.2ohm Mesh Coil
AACT Technology
PEMT Technology
E-liquid Capacity: 13ml
Puffs: 5000
Nicotine: 5%(50mg)
Nicotine Type: nic salt
Battery Capacity: 650mAh
Charging: USB Type-C
Atomizing Core: 1.2ohm mesh
Firing Mechanism: Draw-activated



Recommended products:
novo 2c vape
voopoo vinci 3

So I recently bought this tank, ran some juice through it and cleaned it. Everything came apart just fine, except the afc ring and the base. Would anyone happen to know if the arc ring does come off of the base?

The Rincoe Manto AIO Plus Kit 80W is an outstanding device that combines the convenience of a pod system with the power of a high-performance mod. This compact and stylish kit is built with advanced materials and cutting-edge technology, making it an excellent choice for vapers of all levels.

The Manto aio plus rincoe uk boasts an impressive output power range of 1-80W, and it can be powered by a single replaceable 18650 cell (not included). The device also features an input voltage range of 3.5-4.2V, and an efficiency of 95%, ensuring that it delivers consistent and reliable performance with every puff.

With a firing speed of 0.001s, the Manto AIO Plus Pod Kit is one of the fastest devices on the market. This lightning-fast response time allows you to enjoy instant vapour production, making for a smooth and satisfying vaping experience. The device also has a max output current of 30A, providing plenty of power for sub-ohm vaping.

The Manto AIO Plus Pod Kit is constructed using high-quality ABS, PC, and PCTG materials, making it both durable and lightweight. The device has a sleek and ergonomic design, with dimensions of 824728mm, making it comfortable to hold and easy to carry.

The kit includes a 3ml pod, which has a resistance range of 0.15ohm/0.3ohm, and is perfect for both direct-to-lung and mouth-to-lung vaping styles. The pod is easy to fill and features an adjustable airflow system, allowing you to customize your vaping experience to suit your preferences.

Rincoe Manto AIO Plus Pod Kit 80W is an excellent choice for vapers who want a compact and powerful device that delivers exceptional performance. Its fast firing speed, high output power, and adjustable airflow system make it a versatile device that can accommodate a wide range of vaping styles. Whether you're a seasoned vaper or just starting, the Manto AIO Plus Pod Kit is sure to impress. And you can enter vape warehouse to learn more.

You may like:
smok novo 5
crown m uk

The newly launched cutting-edge vaping device puff xtrax hhc stix 2g disposable vape kit is quickly gaining popularity among users for its ease of use and high-quality performance. This innovative product aims to provide an enhanced vaping experience through its advanced features and high-quality ingredients and is loved by a large number of vaping enthusiasts.

At the heart of the puff xtrax HHC stix 2g disposable vape kit is a powerful 550mAh battery that will give you a long-lasting vaping experience. And it comes pre-charged when you receive it, so it works right out of the box with no additional charging required. With a battery life that lasts for days, you can enjoy an uninterrupted vaping experience without worrying about running out of power.

2ml of e-liquid capacity, filled with high-quality e-liquid without harmful chemicals and additives, with high-quality HHC (tetrahydrocannabinol) content, each drop has been carefully developed to restore the purest taste and flavour of e-liquid mouthfeel so you can enjoy your favourite flavours for a long time. HHC has high potency levels to provide a more effective and longer-lasting vaping experience than regular CBD oil. This makes the puff xtrax hhc stix 2g disposable vape kit ideal for users looking for a more intense vaping experience.

The entire device is made of top-grade materials, which are not only durable but also safe and secure, providing you with a satisfying and safe vaping experience. This ensures that you can enjoy your vaping experience without any health risks or negative effects on your body. It has an advanced heating element inside to ensure that your e-liquid heats up evenly and quickly. This results in a smooth and consistent vaping experience without any harsh or burnt taste, allowing you to enjoy the ultimate in vaping.

This powerful and innovative vaping device can bring you an enhanced and unforgettable vaping experience. With its advanced features and high-quality HHC ingredients, it will definitely open up new horizons for your vaping experience.

More attractive new products are in our vape online store, you are welcome to choose.

We also want to recommend more boutiques for you:
buy elf bars online
10000 puffs vape

The SMOK Novo 5 Kit, 900mAh Is geared towards MTL vapers supporting 0.5ohm-2.5ohm resistance and have a Plug-n-play coil installation. The Novo 5 is available for both freebase e-liquid and nic salt E-liquid. The coil has an anti-leakage structure to make every drop fully used and prevents a messy vaping experience.



Features:
1. Top-fill Design
2. Button/Air Switch
3. Air-inlet Ring
4. novo 5 Meshed 0.7ohm MTL Pod
5. Variable Wattage 5W-30W
6. 900mAh Built-in Battery
...

Click here for more:

SMOK Novo 5 Kit: SMOK Novo 5 Pod System Kit

Product: VAPORESSO GEN 200

Black timesvape heavy hitter mech mod 21700 $40 plus shipping lightly used. Will throw in Samsung 30t I used for like 2 weeks for 5 bucks or 2 for 10 bucks. There both lightly used I bought them for this mod about a month ago. The same time I bought the mod.