The best mag 18 mod has received a lot of attention from various users since its launch, and I believe that it is not only noted for its great looks, but also for its powerful performance. Here we have to mention the MAG 18 mod.


Powered by dual 18650 batteries and with a maximum power of 230W, this is the best vape mod kit in terms of output which features a capacity that cannot be ignored.

And the built-in advanced IQ-X Chip provides Bypass, TC and Power Modes for the unit. The Power Mode allows you to adjust between 5 and 230W.

Paired with a 0.96-inch TFT Display on the side allows you to view the data more clearly. With the 510 thread, a tight connection to the smok uk TFV 18 Tank is also possible.

If you want a product that will last and give you a great vaping experience, the mag 18 mod is an absolute must.

You can also choose your favourite from them:
best rpm5 smok
best voopoo gt 2

Uwell Caliburn KOKO Prime 15W Pod System Kit equipped with the same compact size as the original Caliburn KOKO, made of lightweight and durable PC+ABS materials. Powered by a built-in 690mAh battery with a larger capacity and uses a faster and more convenient Type-C port, which can be fully charged in less than an hour with a 1.6A charging current. Uwell Caliburn KOKO Prime refillable pod cartridge has a 2ml capacity with a top filling design.


Parameters:
Size:68mm x 45.6mm x 16mm
MaterialCTG, PC+ABS
Capacity: 2ml
Wattage Output:15W Max
Battery :690mAh Built-in
Coil Resistance:UN2 Meshed-H 0.8 Ω (Sold Separately) / 1 Ω(Pre-installed)


Features:
-Draw-Activated Firing Mechanism
-LED Indicator Light
-Interchangeable Decorative Panels
-USB Type-C Port with 1.6A Fast Charging
-Compatible with Caliburn G Pod & Coils
-Fashionable Lanyard to Free Your Hands
-1.6A Type-C Fast Charging
-Ingenious Dual Airway Design

You May Also Like The Following Items:
Candy King Air Disposable Vape - 6000 Puffs
Flum Vapor Float Disposable Vape - 3000 Puffs
SWFT Mod Disposable Vape - 5000 Puffs

Smok Rainbowbar disposable pod.
Has an LED light that will light up when puffed.

VOOPOO Argus MT Kit

Argus MT Kit comes with 3000mAh built-in battery, 6.5ml capacity and 5V/3A type-c fast charging. Designed with IP68 rating tri-proof function (water-proof, dust-proof, drop-proof), it is loyal accompany fearless of any extreme environment or scenario. And the unique volcano crater structure is added for leakage proof and airflow improvement. The two-way airflow will bring you an easy deep DL vping by reducing 60% airflow loss. Powered by GENE.TT 2.0 chip, Argus MT can provide multiple modes, such as Smart, RBA, Turbo and TC. There are no needs for you to worry about accidental igniting or switching in your pocket with QS lock button. VOOPOO Argus MT Kit is equipped with Maat Tank New that is compatible with all TPP coils, features top filling system.

Details:
1. 100W max power, 6.5ml capacity
2. IP68 rating tri-proof function: water-proof, dust-proof, drop-proof
3. Ingenious crater leakage proof structure
4. GENE.TT 2.0 chip, QS lock
5. Built-in 3000mAh battery
6. 3A Type-C fast charging port with dust-proof cover design
7. Holeless appearance, lanyard ring design
8. Two-way airflow brings easy deep DL vaping
9. Easy top filling design
10. Multiple modes: Smart, RBA, Turbo and TC
11. Compatible with all TPP coils
12. BMS real-time battery protection
13. Safety protections: Overtime/Low Battery/Overcharge/Output Over-current/Short-circuit/Over-heating Protection




VOOPOO Argus MT Mod

Argus MT Mod comes with 3000mAh built-in battery, 5V/3A type-c fast charging. Designed with IP68 rating tri-proof function (water-proof, dust-proof, drop-proof), it is loyal accompany fearless of any extreme environment or scenario. Powered by GENE.TT 2.0 chip, Argus MT can provide multiple modes, such as Smart, RBA, Turbo and TC. There are no needs for you to worry about accidental igniting or switching in your pocket with QS lock button.

Details:
1. 100W max power
2. IP68 rating tri-proof function: water-proof, dust-proof, drop-proof
3. GENE.TT 2.0 chip, QS lock
4. Built-in 3000mAh battery
5. 3A Type-C fast charging port with dust-proof cover design
6. Multiple modes: Smart, RBA, Turbo and TC
7. BMS real-time battery protection
8. Safety protections: Overtime/Low Battery/Overcharge/Output Over-current/Short-circuit/Over-heating Protection

Here we introduce a new mod member of Lost Vape QUEST – URSA NANO PRO pod system kit.Lost Vape Ursa Nano Pro is a GAME CHANGER, a Top-tier level Pod System featuring 25W max output.The first to bundle both integrated coil & changeable coil system in one kit set.

Features

• Glossy Anodized Pastel Gradient Dual-tone coating

• 2.5ml Vape Juice Capacity

• Compatible With Both Integrated Coil and Replaceable Coil

• Step-less Adjustable Airflow

• For MTL, Loose MTL, and RL Vaping

• Fit For Nic Salt and Freebase E-juice

• Internal 900mAh Battery

• 9-25W Output Range

• LOST VAPE QUEST Chip

• 0.42” OLED Screen

• Triggered by Both Auto Draw and Manual Fire

• Short-Circuit Protection / Weak Battery Protection / Over Heat Protection

Newcomer friendly yet not forgetting user experience for advanced vapers.The bundled 0.8Ω (changeable system) is designed for MTL & Salt Nic users, and the 0.6Ω (integrated system) supports Loose MTL ~ RL range for the freebase community.You can now experience two systems in one device. Be sure to check out the fascinating Glossy Anodized Pastel Gradient Dual-tone CMF and it's Breath-Pulse Trigger LED.

Please go to vape store near me to make an order.

You may also like:

dotmod revo
smok nord 2 kit price

VOOPOO will invite 10 friends to be VOOPOO Product Reviewer and VOOPOO Brand Promoter! If you want to spark your life with VOOPOO, just join us !


You will get

1. The newest products of VOOPOO for free

2. Birthday and festival gifts


We need you

1. Post your review of VOOPOO product and information of VOOPOO activities on this forum and other social media.

2. Actively reply to the posts of VOOPOO official posts.


If you wanna join us or get more details, please DM me or email freya@voopootech.com.


Just join us and make your vaping more wonderful with VOOPOO!

What is Naked 100 Menthol Berry vape juice at vapesourcing.com? Berry by Naked 100 Menthol is a mix of sweet and tart berry flavors that'll be sure to leave you craving more and more of this vape juice. With every puff of Naked 100 Menthol Berry, you'll taste the flavors of a blend of sweet and ripe blueberries, raspberries, blackberries, and ice-cold menthol, making for an incredible mixture you'll love to add to your collection. Berry by Naked 100 Menthol comes inside of a large 60mL bottle and comes in multiple nicotine strengths, including 0mg, 3mg, 6mg, and 12mg, assuring you'll have enough choices for a smooth and enjoyable vape every time.

best vape juice Very Cool by Naked 100 Menthol takes freshly picked blueberries, blackberries, and raspberries, flash freezes them, blends them, and drizzles a little bit of honey on top. Very Cool is as amazing as it sounds, with a sweet and tangy profile layered with refreshing notes of ice.

Specifications:
Primary Flavors: Menthol, Blueberry, Blackberry, Raspberry
Manufacture: USA Vape Lab
Brand: Naked 100 Menthol
Nicotine Level: 0mg, 3mg, 6mg, 12mg
VG/PG Ratio: 70/30

naked very cool Features:
60mL Glass Bottle
Dropper In Bottle
65% VG
35% PG
Made in USA
Available nicotine: 0mg, 3mg, 6mg, 12mg



Recommended products:
best tobacco e juice
fruit vape juice

Zovoo Cubebar 600 Disposables Review



With thanks to Zovoo/Voopoo (thanks Fiona!), I am pleased to present to you, lovely lot, the CubeBar 600!

Yes, it is another iteration of a vape disposable, but having tested so many by now, I can tell you that not all of them are made equal. And we shall have a look at what the Zovoo CubeBar600 brings to the table in this review, after my use of them these past weeks.

Quick specs and features:

- Dimensions at 96 x 18 x 18 mm. It’s small and shaped kind of like an olive oil bottle with a very short neck!

- 400 mAh battery.

- Appears to be made from PC and PCTG.

- Having a 1.5 ohms coil.

- 2 mL of e-liquid capacity and I suppose the “600” in the model name hints towards a 600-puff life, which is typical of a 2mL capacity disposable vape device.

- Available in 10 flavours per Zovoo’s website.

The device comes in stylish and colourful packaging with loads of information printed around the outer box including device specs, manufacturer information, and of course the flavour! Surprisingly, this device comes with a user manual inside the box- something I rarely see with disposables.

It is mainly made of plastic which makes it very lightweight. The brand and flavour are printed in front, and its bottom has an LED light that activates when vaping and lights up when battery becomes low. It’s simple and straightforward, free from extra features such as airflow control or ability to recharge the battery.

The device shell itself has a vertical stripe design going on that appears to be underneath the outermost plastic coating, and this adds a little more flair to its looks. The mouthpiece is fixed but is quite comfortable, as it narrows a little from the device body but then flares out towards the tapered top.

It’s comfortable in the hand, easy to slip inside one’s pocket, and is very portable making it an ideal carry device.



From a performance point of view, I have to say that the CubeBar 600 actually surprised me a little! The auto draw is very responsive, delivering a smooth and quiet vape. But there were two things that really stood out for me with the CubeBar 600 against most disposables I have reviewed, and that is draw tightness and draw warmth. In terms of tightness, it’s akin to almost a tight MTL that is amazingly close to that from a cigarette. I’m really impressed by that!

Now, most TPD (read: 2 mL capacity) disposables I’ve tried are often cool on the vape, perhaps to maximise puff life whilst preserving the battery as much as possible. Not the CubeBar 600, as this one actually gives a decent and warmish MTL vape. And for someone like me, that warmth just adds a little extra to the satisfaction I want to achieve when vaping. The vape just really hits the spot for me!



I was sent five flavours to try, namely: Cola Ice, Blood Orange Ice, Honeydew Ice, Pineapple Mango, and the quite unique Ginger Lemonade. These were pleasant to vape, with dense flavour and actually not dry-tasting unlike some disposable on the market. Although they all have a touch of cooling in them, the “ice” feeling doesn’t overwhelm the taste or main favour notes which is always a pro. They all tasted as I expected, but truth be told I wasn’t sure what to expect of the Ginger Lemonade having never vaped this type of flavour before. Well, surprisingly it was actually quite nice and refreshing! It kind of tastes like a sweet soothing lozenge you might pop in when you’ve got a sore throat. Don’t get me wrong, it doesn’t taste like medicine, rather a strong lemonade sprinkled with mild ginger taste. I quite liked it!

Final Thoughts:

I would happily recommend the Zovoo CubeBar 600, no question about it! For those that use disposable vapes, or vapers wanting an easy back-up device, and most of all for smokers wanting to switch to vaping, you can’t really go wrong in choosing the CubeBar 600. It will satiate your nicotine and MTL draw cravings (regarding the draw cravings, ex-smokers will know what I’m talking about).

My sincerest thanks again to Zovoo/Voopoo for allowing me to review these products!

Hello,

I have the Smok P3, and I read it was updatable, but I haven't found a way to check and/or do this. Can someone point me in the right direction?

Also, I've noticed a few issues. It's supposed to be dust/water etc proof, except I've had to tighten down my 510 pin at least 3 times. I know juice has gotten into the battery compartment a few times. Plus the rubberized sleeve has actually separated from itself in places. Are these common issues? I love the form factor of this mod, since I have carpal tunnel and get the dropsies often.

Hello once again folks and welcome back for the 2nd review of the new Argus series of devices, if you missed the first review of the Argus MT Kit I'll leave a link for you here. https://www.e-cigarette-forum.com/threads/voopoo-argus-mt-kit-reviewed-by-bigbob2322.975717/. Today's review will cover the Argus XT Kit that uses a replaceable 21700 or 18650 battery, there is a supplied 18650 adapter shipped with it pre-installed in the device. Like the Argus MT the XT is a IP68 rated device making it shockproof, dustproof and waterproof. I was sent a sample version for review so the final retail version might have some small changes to it. There's a lot to cover so lets get started with my review of the Argus XT Kit.





COLOR CHOICES





IN THE BOX

* 1pc ARGUS XT Device

* 1pc MAAT TANK NEW (6.5ml)

* 1pc TPP-DM1(0.15ohm)*1, TPP-DM2(0.3ohm)

* 1pc Glass Container (6.5ml)

* 1pc Silicon Rubber Pack

* 1pc 18650 Battery Adapter

* 1pc Type-C Cable




PARAMETERS





FEATURES

• 1. Holeless appearance and leather-metal mixed material
• 2. Designed with lanyard rings, convenient to carry
• 3. Turbo mod for extreme boosting vapor experience
• 4. Single external 18650/21700 battery with Type-C charging
• 5. GENE TT 2.0 Chip with Smart, RBA, Turbo and TC mode
• 6. IP68 rating tri-proof function, durable in use
• 7. Humanized QS lock to avoid accidental igniting or switching
• 8. 6.5ml e-juice capacity, easy top filling system
• 9. Adopts volcano crater structure to prevent leakage
• 10. Two-way airflow for easy deep DL vaping
• 11. Dual In One Tech 2.0 mesh coils with denser flavor and longer lifespan
• 12. Compatible with VOOPOO Maat Tank New and all TPP Coils
• 13. Seven safety protections to guarantee the safe use

NEW MATTE TANK

VOLCANO CRATER DESIGN

TOP FILL

COMPATIBLE WITH ALL TPP COILS

100 WATTS MAXIMUM POWER OUTPUT

4 POWER MODES INCLUDING TC WITH - (TI - NI - SS )
WITH 3 MEMORY SETTINGS FOR TC MODES

EACH POWER MODE HAS IT'S OWN COLOR
TURBO (RED) - SMART (ORANGE) - RBA (BLUE) - TC (GREEN)

QS LOCKING SWITCH ON BOTH BUT IN DIFFERENT LOCATIONS

3A TYPE-C FAST CHARGING

IP68 RATED - (SHOCKPROOF) (DUSTPROOF) (WATERPROOF)

ARGUS XT - REPLACEABLE 21700 OR 18650 BATTERY

SEVEN SAFETY PROTECTIONS

GENE.TT 2.0 CHIPSET

FIRST IMPRESSIONS


After opening the Argus MT I reviewed the other day I was hoping for the same wow feeling opening the Argus XT and not quite as brilliant as the White MT version is I like it. Voopoo always does a great job with packaging on the Argus Kits and this one is no exception, again a metal tin is used to hold the Argus XT and Matte tank, coils, charging cable, spare O-rings, fill port gasket, 18650 battery adapter and user manual. As I said in my opening sentence I was sent a sample version of the Argus XT Kit so the final retail version may be slightly different.

A big thumbs up to Voopoo for the metal tin because it is so useful for storing vape related material such as wicking material, coils, tools or whatever you can fit inside. The supplied 18650 battery adapter is pre-installed in the device so you'll need to remove it if using a 21700 battery.

I won't be covering the new Matte Tank in this review as I covered it in the Argus MT Kit review earlier, check out the review link I posted in the beginning of this review. I will tell you this about the new Matte Tank ( very good flavor with plenty of airflow ).


I was sent the Silver Grey sample version that has leather wrapped on the sides and spine of the device, the leather has a very soft cushy feel to it but it's done in 2 different colors of Grey and a light Green with the body being Silver metal.

I don't quite know how I feel about the 2 choices of the leather colors but I will say it has been growing on me the more I use it. I really like the look of the embossed Argus XT and mountain top symbol between the double stitching that separates the 2 colors on the spine of the device.

One side of the device has branding of Gene TT printed at the bottom portion of the devices body which is done lightly, but the other side of the Argus XT has no branding at all. Although the inner metal body has some nice sparkle to it it's a bit of a fingerprint magnet. On the outer body the metal is a shiny but matt finish that's not prone to fingerprints.

I don't know how you feel about lanyard rings on a Mod but I don't like them, I personally know of no one that uses one or likes them but as the Argus MT has one so does the Argus XT but thankfully it's in a location and done with a minimal appearance that I hardly even notice it when vaping so I can't really knock it to bad. The top plate continues the shape of the Argus XT, I actually like the shape and you'll be happy to know that a 28mm atomizer will fit.

The Argus XT uses the familiar bottom trap door for the battery that so may manufacturers use, being a IP68 rated device it has to withstand drops and falls without opening and although I haven't actually dropped the Mod I have slammed it down hard several times on a hard surface without it opening. There is a arrow pointing in the direction to open it using the inner portion of it.

There is only one polarity marking on the Argus XT with it being on the battery trap door contact with a - minus symbol, no positive + symbol is inside the device.

Like the Argus MT the Argus XT uses a lock switch that allow the device to be locked without having to do the 5 presses of the Power/Fire button shutting the device off when carrying in a pocket for safe travel.

Unlike the Argus MT that has a 2 position lock switch (ON/OFF) the Argus XT uses a 3 position lock switch that when in the 3rd position all the way to the right it only locks the adjustment buttons but still allows you to vape.

When facing the switch the far left position locks the entire device from operating, a locked padlock symbol, single bar line, and a circle with a diagonal line are printed on the device below the locking switch. In the center position you can vape but the adjustment buttons are unlocked. When the adjustment buttons are locked a red circle with a diagonal line appears at the bottom right of the wattage on the display screen. The screen layout is below.

SCREEN LAYOUT - TOP TO BOTTOM / LEFT TO RIGHT

* Wattage/Temperature Selected

* Power Mode Selected

* Battery Percentage % / Battery bar

* Puff Counter

* Ohms

* Volts

* Seconds Of Last Vape

The front face of the device has a pretty clean look with almost all the buttons, charge port drop down door, Power/Fire button and lock switch having a almost flush to the Mod feeling to them with some button rattle coming from the rocker bar adjustment button and drop down charge port door, the lock switch a Power/Fire button is solid on the sample version.

The rocker bar adjustment button is very responsive and easy to operate, scrolling is very fast as well. The charge port drop down door locks into place with a click securing it. Having 4 power modes including 3 in TC mode for NI,TI, and SS is a big plus and there are 3 memory settings when using TC mode.

There is a Turbo mode that increases power at the beginning of the vape for a added kick which works well. The Smart mode gives a recommended wattage and wont allow you to go past the maximum recommended wattage for the coil your vaping. In RBA mode you have the power to set your wattage at any range up to the full power output of 100 watts.

Each of the power modes has it's own color as well which is kind of nice giving the display screen a new look Turbo - (RED) Smart - (ORANGE) RBA - (BLUE) TC - (GREEN). Getting into the menu system is very easy and easy to navigate through as well.

MENU SYSTEM

* On/Off - 5 Quick Presses Of The Power/Fire Button

* To Enter The Menu System - Press And Hold Both Adjustment Buttons Simultaneously

* Once In The Menu Use Either Adjustment Button To Move To The Mode Or Setting Selection, Once There Press The Power/Fire Button To Open it, Once Your Selection Is Made Press The Power/ Fire Button To Lock In And Activate Your Selection


I have to say that Voopoo has done it again releasing another winner of a Kit with the Argus MT. Hand fitment is great with thumb or finger fire and it has a good weight to it, not light or heavy either. Build quality of the device feels above average with no button rattle and a nice tactile feel to them with a audible click from all the buttons. There is no lag in firing of the device what so ever.

PROS

* Attractive

* Solid Build

* Easy Menu

* Bright

* Vivid

* Very Good Flavor

* IP 68 Rated

* Lock Switch

* 3A Charging


CONS

* Wattage And Font Size Should Be of Equal Size

* Lanyard Ring

* Slight Rattle Of Adjustment Button And Charge Port Door


FINAL IMPRESSIONS


A big thumbs up to Voopoo on the release of the Argus MT Kit, it seems that in the past 8 months that Voopoo has really stepped up their game releasing winner after winner of devices and kits from pods to full sized kits of which several of each are in my daily rotation of personal use.

I would think most if not all of you can agree that the XT is a very attractive device alone but looks don't make a winner. The reason I consider it a winner is the vape that I get from the kit including the Matte Tank and TPP Coils, very flavorful with more than enough vapor.

Having 3A charging is also one plus that lets you come to a full charge quickly and something I forgot to mention is that when charging little animated bubbles rise from the bottom of the display screen like carbonation bubbles from soda, very cool looking!

The lock switch work great and I wish every device had one, I know it takes not time to press a button 5 times quickly but sliding a switch is quicker when putting it in a pocket and also quicker when ready to vape again.

I really like the Turbo mode getting that little added kick of power at the beginning of a vape, for most people the Smart mode will prove beneficial preventing accidental wattage adjustment over the maximum wattage for the coil installed.

Using the supplied 0.15Ω coil rated for between 60-80w and a best setting of 65-75w I never needed to exceed the minimum of 60 watts for very good flavor so this coil will last a little bit longer vaping it at it's minimum recommended wattage and help preserve battery life.

Using the 0.2Ω coil rated for between 40-60w and a best setting of 50-55w I found my sweet spot at 52watts. Out of the 2 coils I prefer the 0.15Ω because it edges the 0.2Ω coil out by a bit with flavor in my opinion, every vaper is different so my findings might be different than yours but both supplied coils put very good flavor.


I would like to thank Nical and Voopoo for providing the Argus XT Kit for the purpose of this review and I hope that I answered all of your questions about the Argus XT Kit.

THANK YOU
BIGBOB2322

Hello again and welcome to another Z-Lee review. Today we have two different disposable vapes made my Yumi called the POPMOD and EPICMOD. For the most part, they're both very similar, but they do have their differences. Which one might be best for you is based on what you want most out of a disposable vape and the particular flavor you're after. While both of these disposables have the same flavor options, they do taste different across models. I'll get into a more in-depth description as we progress through this review.

I was asked by Sue over at HealthCabin to do these reviews, and while I don't see myself flipping over to disposables from coil head tanks and rebuildables, they may be a great fit for you. Anything to get you off of big tobacco's stinkies is a win in my book. As always, this review will be conducted in fairness and with honesty.

Alright, lehgo.
What you can expect with the POPMOD:

• 12 mL eliquid capacity
• <4500 puffs
• 700 mAh rechargable battery
• USB Type-C charging port (0.2 - 0.5A)
• Adjustable airflow
• Mesh coil
• 0/20/30/50 mg/mL salt nic (HealthCabin only selling 50 mg/mL)

• Dimensions: 78.4 * 44 * 20 mm
• Power Output: 9.6W

• Mesh coil & Special cotton
• Lanyard hole

• Adjustable via a sliding switch

I received the Blueberry, Grape, and Watermelon for this review. Unfortunately the Watermelon package was leaking upon arrival and ended up killing the battery, so Blueberry and Grape is what I'll describe below as best as I can with comparisons against the EPICMOD when applicable.
Flavor Notes: Blueberry, Menthol

Airflow Adjustments: Loose MTL to Very Restricted Direct Lung

Flavor Description: Both flavors are equally prevalent. In comparison to the Blueberry EPICMOD, the menthol is more pronounced leaving a greater cooling sensation on the inhale and exhale.

Rating: 7.5 - I like a little menthol in my vapes, but I'm not the biggest fan of strong menthol. This would probably rate higher for those who like a stronger menthol sensation.
Flavor Notes: Grape, Menthol

Airflow Adjustments: Loose MTL to Very Restricted Direct Lung

Flavor Description: The grape flavor is a sugary candy grape. It's what you'd imagine from a grape Warhead, or grape flavored Kool-aid with the cooling sensation of menthol. Unlike the Blueberry POPMOD, the distribution of grape and menthol flavoring favors the candy grape a slight bit.

Rating: 8.0 - I know there are some individuals out there that absolutely love grape flavored vapes. If you are one of those individuals that likes candy grape with a soothing menthol kick, then this one would be right up your alley.

*Note* At the time of this review, the Grape POPMOD battery has ceased to function properly or take a charge.


All POPMOD disposables arrived and looked to be in good health. Upon closer inspection and some passing time, 2 of the 3 disposables ended up being inoperative. The battery compartment of the 3 and only survivor wants to pop out when I try and remove the USB Type-C charging cable.


In hand, the disposable feels smooth with the polished aluminum casing and it looks great. It's extremely lightweight and very pocket friendly. The adjustable sliding airflow switch on the bottom is a definite plus, although the range of airflow is pretty miniscule. I'd say it ranges from a loose MTL to a very Restricted Direct Lung. There is a small LED on the bottom that lights up when you take a drag or plug/unplug the charging cable. It will also flash 3 times when the battery is dead.

The tested charging speed for the POPMOD ranged from 0.2 to 0.5A. 0.2A would likely take nearly half a work day to charge a 700 mAh battery (3.5 hours), while a 0.5A charge would likely take about an hour and a half. 0.5A isn't unusual for a 700 mAh battery, but 0.2A definitely is. If I had to guess how many puffs the battery lasted before it needed a recharge, I'd say 100ish puffs. The Type-C port does read a 3.0 QC charging cable however, there's no pass-through vaping. The cable must be unplugged before vaping.

When the vape is working, it definitely dishes out a lot of flavor in the advertised salt nic concentration (5% in this case). I may have just received a bad batch of samples, but I can only judge based on what I've experienced.


++ PROS ++

• Very light weight
• Very compact
• Extremely easy to use
• Looks sleek
• Great flavor output (flavor choice is subjective)
• Nicotine delivery on point
• USB Type-C port (0.2 -0.5?)
• Reads a USB Type-C 3.0 QC cable which is very convenient

- - CONS - -

• Reliability?
• Build quality/assembly is questionable
• Potential for leaking if you get a bad one

+ - PREFERENTIAL CONSIDERATIONS - +

• Lanyard loop (lanyard not included)
• 0.2 to 0.5A charging speed
• No pass-through vaping

The EPICMOD seems to be a slightly younger version of the POPMOD when comparing them side by side. The only major differences between them are the airflow, the hand feel, and the shape of the mouth piece. Being that the EPICMOD lacks an airflow control, the shape of the mouth piece would further suggest that this device is meant more for (loose) MTL vapers.



What you can expect from the EPICMOD:

• 14 mL eliquid capacity
• <5500 puffs
• 650 mAh rechargable battery
• USB Type-C charging port (0.5A)
• Mesh coil
• 0/20/30/50 mg/mL salt nic (HealthCabin only selling 50 mg/mL)
• Lanyard hole

• Dimensions: 66 * 42 * 19 mm

I received the Blueberry, Grape, and Pink Lemonade flavors for this review. I will describe below as best as I can with comparisons against the POPMOD when applicable.
Flavor Notes: Blueberry, Menthol, Sweetener?

Airflow Adjustments: None

Flavor Description: The blueberry flavor clearly overpowers the menthol additive. However, unlike the POPMOD, I'm getting a much sweeter flavor. This could be due to the lower presence of menthol which makes the blueberry pop out more, or an additive sweetener has been splashed in.

Rating: 8.0 - The menthol is far less present in the EPICMOD in comparison to the POPMOD however, you still get the cooling sensation of the menthol. This would probably rate higher for those who like more of a sweeter flavor.

Flavor Notes: Grape, Menthol

Airflow Adjustments: None

Flavor Description: The grape flavor is a mixture of candy grape and a real grape. To my surprise, the grape is a bit more subtle than the POPMOD, and maybe a tad bit sweeter or tart. I will however say that the menthol is much more prevalent in grape than it is in blueberry when comparing EPICMODS. An even blend of grape, menthol, and sweetener with a tad bit of a tart aftertaste.

Rating: 8.5 - This type of grape is more up my alley. If you want a more sweeter (tart?) grape flavor and less of a sugary one (if that makes any sense), this is a better choice over the POPMOD.


Flavor Notes: Pink Lemonade (?), Menthol

Airflow Adjustments: None

Flavor Description: I'm not exactly sure how to describe this. I can definitely taste the lemonade, but it's like they shoved a bunch of flowers into the glass and muddled it all together. There's a floral taste mixed in with the lemonade. It's almost like I took in a mouth full of lemonade and then smelled some pungent wild flowers while swallowing the lemonade. I think pink lemonade way back in the day was actually made like this, but this isn't what I'd expect from a pink lemonade disposable. The menthol is more subtle in this disposable, but still very present. By percentage, I'd say 40% lemonade, 35% wild flowers, and 25% menthol.

Rating: 6.5 - The flavor profile just doesn't jive with the description very well. If the flavor was OG Pink Lemonade, I think that would be more accurate and would probably give some people a heads up that this isn't a Kool-aid-type pink lemonade. A little bit of additional sweetener might have helped this one out a bit.



Basic differences:

• 14 mL capacity vs 12 in the POPMOD
• >5500 puffs over >4500 puffs
• 650 mAh battery instead of 700 mAh
• Exterior is made of a silicon/rubber and plastic instead of the brushed aluminum

There really isn't much difference between the POPMOD and EPICMOD strictly by looking at their specs. The POPMOD hosts a 700 mAh battery while the EPICMOD sports a 650 mAh battery. Their overall size and physical attributes are very close with the exception of some additional edges etched into the EPICMOD. The EPICMOD doesn't have an airflow control, and the airflow hole sits on the side. Judging by the build quality, the EPICMOD seems quite a bit more robust and forgiving if dropped being that the bottom 2/3 of the device is a single rubbery plastic piece. The only way this could leak is if the disposable sat on its side for a prolonged amount of time.

• Less subject to leak based on construction
• Very light weight
• Very compact
• Extremely easy to use
• Looks sleek
• Mouth piece is suited for MTL lip sealing
• A little bit of grip in-hand
• Built sturdy
• Good flavor output (flavor choice is subjective)
• Nicotine delivery on point
• USB Type-C port (0.5A)
• Reads a USB Type-C 3.0 QC cable which is very convenient

• No airflow control

• Lanyard loop (lanyard not included)
• 0.5A charging speed
• No pass-through vaping

The EPICMOD proves to be a better choice between these two mods, in my opinion. Again, I may have received a bunk set of POPMOD samples that skewed the results a bit, but I also believe the EPICMOD is better constructed against leaking which is always a concern for any pocketable vape product. Ultimately, if flavor is your biggest priority, then find what flavor you think suits you the best between these two and go with it.

The EPICMOD can be found here, and the POPMOD can be found here. Both disposables are not currently in stock at HealthCabin, but they generally restock fairly quickly.

Again, I want to thank Sue over at HealthCabin for sending these out for review. I may not be a fan of disposables, but I don't mind testing them out to stay in the loop with what's currently available on the market.

Thanks for reading, and happy vape hoarding!

So bit of an interesting one this being contacted by
'the Monster Group' asking me if i would be interested in reviewing there new range of products released in the UK. If you are not aware of 'monster vape labs' as a whole you may recognise at least couple of side brands like jam monster. (as pictured)

I must admit i was a little apprehensive at however after this line was dropped "We are looking for honest reviews and your true thoughts on how your overall experience is." after seeing 2 keywords, i kind of felt like i "needed" to do this. Almost like i dare you... Ha! #dareaccepted

In a way i could integrate the disposable & salt review of the same flavour however it's kind of one of them where all products are basically the same just released for different types of devices. In a sense is kind of a good thing especially if someone going through stages of vaping disposable to start the journey, mtl pod for salts if they choose something more eco friendly & sustainable, aswel as 70/30 if they find Direct lung more fore them. Aswel as 'some' people find they dont like a lot of chopping & changing of juices so they have a set flavour. Rather then full integration I'll just put a picture of the other 2 products

So here we have the
MVL - classic series by Monster Vape Labs
Minister Of Mango:

70/30vg pg 75ml bottle 50ml shortfill (making enough for 2x 18mg nicshots IF required... But this a review im going without nic. Im a little unclear what the meaning or relevance of the double label pattern

So the device im using is the hellvape dead rabbit with a parallel ni80 coil reading at 0.33 ohm on the Vaporesso Target 100. Nothing too exciting build wise..

So Down to the flavour.
Truth be told I wouldn't put this down to a totally authentic ripe mango juice, I would put this down more as a mango cream but saying this its a very nice flavoursome yet smooth possibly, slightly cooled at higher wattages with airflow open,
more bursting at with flavour like a juice when airflow cut by half leaving nice refreshing sensation.



I hope you all enjoyed the review


-----------------

Not sure if anyone interested on 'Dark humour vapes' on facebook im running a UK giveaway
For an Vaporesso Xros Nano & 5 bottles of salts 10 & 20mg (wasn't sure what to buy so i got both), which i shall be closing on 4/9/22.

Sent from my MAR-LX1B using Tapatalk

Hello and welcome back to another review. Today we have the Vapefly Brunhilde 1o3 R(D)TA sent to me by Joyi over at Sourcemore. Even though this is labeled an RTA, it's bottom fed via stainless steel cables which to me, would indicate it's an RDTA. The 1o3 is their third installment of the Brunhilde line of atomizers and incorporates some innovations that I haven't seen before which is always great to see.

If you've purchased a Vapefly product in the past, your expectations are probably pretty high like it is for me. The machining is top notch and I'm a huge fan of their style and aesthetics. With that in mind, there are a few considerations that I wouldn't necessarily consider cons, but definitely things to factor in if you're looking to purchase this atomizer. If you're a fan of versatility and/or you like to tinker, then you'll probably enjoy this RDTA even more. As always, I will conduct this review in a fair and honest manner.

Without further ado, let's get into it.

(photos can be clicked on to get a closer look and text will be added in case the photos do not load)

• Silver
• Gunmetal
• Black

• Vapefly Brunhilde 1o3 RTA
• 7 mL Glass Tube
• 2x 0.35 Ohm Pre-built Coils
• 2x Firebolt Shoelace Cotton
• L-shaped Allen Driver
• T-Shaped Triple-sided Driver (2 Flat Heads, 1 Phillips)
• User Manual
• 4 Allen Screws
• 2 Screws
• 510 Drip Tip Adapter
• Slotted Airflow Insert (Honeycomb Insert Comes Pre-installed)
• Rubber Plug for Single Coil Configuration
• 4 Stainless Steel Wires
• Spare O-rings

Diameter: 25.2 mm
Height: 69.9 mm
Drip Tip: 810
Coil Configurations: Single, Dual Coils, & Quad Coil
Capacity: 7 mL
There are tons of airflow options with this atomizer. Instead of the posts being open in the center, an interchangeable airflow insert can be used to direct airflow onto the coils directly via the insert. You can also twist the airflow ring to close off the airflow brought into the insert if you want to cut down the airflow to a Restricted Direct Lung (RDL) type vape.

This deck is intended for single and dual coil builds via a rubber insert that comes with the kit to close off one side if you so choose. Later in the review, you'll see that this deck is large enough to accommodate a quad coil build, but the airflow becomes tricky. More on that below.
One of my biggest gripes with both the MTL and DL Brunhildes in the past was the refill hole. They've opened up the refill hole and changed it to a spring-loaded system that still comes with its flaws, but fits a Chubby Gorilla bottle nozzle very easily.
Out of the box, 4 of the 6 stainless steel wires will be installed with two Allen screws plugging the middle hole on each side. This has become fairly standard for RDTAs with larger tanks like the Wotofo Profile 1.5, Vandy Vape Mato, ThunderHead Creations Artemis, and the Hellvape Helheim S to name a few. If you find the wicking to be insufficient, you can remove the two Allen screws and install two additional stainless steel wires to provide more juice to the wicks.
Like the upgrade made to the enlarged spring-loaded refill hole as I mentioned before, Vapefly continues to listen to customer feedback and find ways to improve their already well-made atomizers.

Hello and welcome back to another review. Today we have the Vapefly Brunhilde 1o3 R(D)TA sent to me by Joyi over at Sourcemore. Even though this is labeled an RTA, it's bottom fed via stainless steel cables which to me, would indicate it's an RDTA. The 1o3 is their third installment of the Brunhilde line of atomizers and incorporates some innovations that I haven't seen before which is always great to see.

If you've purchased a Vapefly product in the past, your expectations are probably pretty high like it is for me. The machining is top notch and I'm a huge fan of their style and aesthetics. With that in mind, there are a few considerations that I wouldn't necessarily consider cons, but definitely things to factor in if you're looking to purchase this atomizer. If you're a fan of versatility and/or you like to tinker, then you'll probably enjoy this RDTA even more. As always, I will conduct this review in a fair and honest manner.

Without further ado, let's get into it.

(photos can be clicked on to get a closer look and text will be added in case the photos do not load)

• Silver
• Gunmetal
• Black

• Vapefly Brunhilde 1o3 RTA
• 7 mL Glass Tube
• 2x 0.35 Ohm Pre-built Coils
• 2x Firebolt Shoelace Cotton
• L-shaped Allen Driver
• T-Shaped Triple-sided Driver (2 Flat Heads, 1 Phillips)
• User Manual
• 4 Allen Screws
• 2 Screws
• 510 Drip Tip Adapter
• Slotted Airflow Insert (Honeycomb Insert Comes Pre-installed)
• Rubber Plug for Single Coil Configuration
• 4 Stainless Steel Wires
• Spare O-rings

Diameter: 25.2 mm
Height: 69.9 mm
Drip Tip: 810
Coil Configurations: Single, Dual Coils, & Quad Coil
Capacity: 7 mL
There are tons of airflow options with this atomizer. Instead of the posts being open in the center, an interchangeable airflow insert can be used to direct airflow onto the coils directly via the insert. You can also twist the airflow ring to close off the airflow brought into the insert if you want to cut down the airflow to a Restricted Direct Lung (RDL) type vape.

This deck is intended for single and dual coil builds via a rubber insert that comes with the kit to close off one side if you so choose. Later in the review, you'll see that this deck is large enough to accommodate a quad coil build, but the airflow becomes tricky. More on that below.
One of my biggest gripes with both the MTL and DL Brunhildes in the past was the refill hole. They've opened up the refill hole and changed it to a spring-loaded system that still comes with its flaws, but fits a Chubby Gorilla bottle nozzle very easily.
Out of the box, 4 of the 6 stainless steel wires will be installed with two Allen screws plugging the middle hole on each side. This has become fairly standard for RDTAs with larger tanks like the Wotofo Profile 1.5, Vandy Vape Mato, ThunderHead Creations Artemis, and the Hellvape Helheim S to name a few. If you find the wicking to be insufficient, you can remove the two Allen screws and install two additional stainless steel wires to provide more juice to the wicks.
Like the upgrade made to the enlarged spring-loaded refill hole as I mentioned before, Vapefly continues to listen to customer feedback and find ways to improve their already well-made atomizers.

I bought this voopoo drag nano today and it will not charge regardless of where I plug it.

Good news: Still analog free for 9 years.

Bad news: It’s getting harder to find stuff to keep my old RBA going. I can’t find anyplace that just makes regular old kanthal coils. Everything uses disposable coils these days. Guess I’ll have to order some wire somewhere and try my hand at making my own coils again.

My favorite online juice store suddenly went “POOF!” The local shops sell almost NOTHING I like. I like simple, single flavor, fruit vapes. Especially watermelon and green apple. I haven’t found a decent green apple for ages! Everything the local shops sell are just mutated strange flavor mixes.

I guess I’m getting old and cranky. I don’t like all these new changes. I want all you darn kids to get off my lawn too!

Ok so I just got this off of Amazon.
Alien 32GA+0.30.8 Flat. One question is, it doesn't have the typical squiggles of alien wire. At least the pics I've seen. Two, what does this even mean? I know the 32 is the gauge. But I'm trying to use vape tool and I don't know what to put in for the values. Help? Please?

Which would you recommend and which is better?
Is the aromamizer plus v3 compatible with the glass extension pack for aromamizer plus v2 and the 8mm metal extension for aromamizer plus v2 and the single/mesh deck of aromamizer plus v2?

Here is a brand new dot aio V2.0 was just purchased. Put a pioneer rba in it for a few minutes and realized i prefer the v1 over this device. Price is 105.00 ships and were in the u.s.a will trade for dot mission rba in like new condition or mission orbit for bb from sellers with feed back only. Thanks for your time feel free to ask any quistion

Hello once again and welcome to today's review of 1 of 2 new sample version Argus Kits from Voopoo. Today I'll be covering the Argus MT Kit with the included Matte Tank. I'll review the other new Argus Kit called the Argus XT also featuring the Matte Tank in the next couple of days so keep a eye out for it's review. There are differences between the 2 new Argus devices that I'll cover so lets get started with the Argus MT Kit review. Both are IP68 rated!






COLOR CHOICES




IN THE BOX

• Argus MT or XT Box Mod
• Maat New Tank
• 0.2Ω DM2 Coil
• 0.3Ω DM4 Coil
• Type-C Charging Cable
• Manual
• Glass Container
• Silicon Rubber Pack

ARGUS MT - ARGUS XT PARAMETERS





FEATURES

• 1. 100W max power, 6.5ml capacity
• 2. IP68 rating tri-proof function: water-proof, dust-proof, drop-proof
• 3. Ingenious crater leakage proof structure
• 4. GENE.TT 2.0 chip, QS lock
• 5. Built-in 3000mAh battery
• 6. 3A Type-C fast charging port with dust-proof cover design
• 7. Holeless appearance, lanyard ring design
• 8. Two-way airflow brings easy deep DL vaping
• 9. Easy top filling design
• 10. Multiple modes: Smart, RBA, Turbo and TC
• 11. Compatible with all TPP coils
• 12. BMS real-time battery protection
• 13. Safety protections: Overtime/Low Battery/Overcharge/Output Over-current/Short-circuit/Over-heating Protection

NEW MATTE TANK







TOP FILL





COMPATIBLE WITH ALL TPP COILS







100 WATTS MAXIMUM POWER OUTPUT





4 POWER MODES INCLUDING TC WITH - (TI - NI - SS )
WITH 3 MEMORY SETTINGS FOR TC MODES





PHOTO OF XT DEVICE WITH SAME 4 POWER MODES
EACH POWER MODE HAS IT'S OWN COLOR
TURBO (RED) - SMART (ORANGE) - RBA (BLUE) - TC (GREEN)





QS LOCKING SWITCH ON BOTH BUT IN DIFFERENT LOCATIONS





3A TYPE-C FAST CHARGING





IP68 RATED - (SHOCKPROOF) (DUSTPROOF) (WATERPROOF)










ARGUS MT - (3000mAh INTERNAL BATTERY)





SEVEN SAFETY PROTECTIONS





FIRST IMPRESSIONS


Voopoo always does a great job with packaging on the Argus Kits and this one is no exception, again a metal tin is used to hold the Argus MT and Matte tank, coils, charging cable, spare O-rings, fill port gasket and user manual. As I said in my opening sentence I was sent a sample version of the Argus MT Kit so the final retail version may be slightly different.

A big thumbs up to Voopoo for the metal tin because it is so useful for storing vape related material such as wicking material, coils, tools or whatever you can fit inside.

I was sent the all white version and it's really attractive, the top plate has a metal finish with the bottom being a very soft silicone that is Grey in color. Attractive is a UNDERSTATEMENT!





I'll start off with the Matte Tank that holds a very generous amount of juice with a 6.5ml capacity using a bubble glass tube. The Matte Tank has plenty of airflow for all you big air lovers but can be dialed down for a nice RDL vape. The drip tip is comfortable to use and has 2 O-rings on it so regular 810 drip tips without O-rings wont fit.

Voopoo made opening the tank easy and speedy with a 1/8 turn opening, after opening you will notice the 2 large fill ports that have a thin silicone rubber covering them with a small hole punched through the center.

I really like and prefer this style of fill port utilizing the silicone membrane that is easily opened with a juice bottles stem and then reseals when the tip is removed, the little hole on each fill port allows air to escape for no mess fill ups. Coils are inserted using the push and pull style through the chimney of the tank, there are no flat spots to line up making it easy.





The Matte Tank uses 2 airflow slots that are 180° apart from each other as is the 2 airflow controls, the airflow controls work as one, whatever is adjusted on 1 is adjusted on the other. On the airflow control dial there are 7 markings for adjustment settings for a quick reference point for the user, resistance of the airflow control dials is perfect. Also shown in this bottom picture is the lanyard ring on the Argus MT device, thank goodness it is low profile and doesn't get in the way or hurt the appearance of the device.







We now come to the Argus MT device which I'm very impressed with because of so many reasons with gorgeous looks being one of them. The spine and sides are wrapped in leather and have a very soft cushy feel to them. One side of the device has Gene TT printed on it at the bottom of the body with the other side having no markings or branding.

On the spine which is flat, ARGUS MT with a mountain top triangle at the top portion is embossed giving it added style. Being a all White device made picture taking very difficult with all the White color wanting to meld together because the entire device's White color is a exact match with buttons, charge port cover, the bezel of the device has sparkle detail that I just couldn't capture but trust me it's there ever so faint as it is.







The bottom of the the device has a very soft silicone rubber preventing any scratches on hard surfaces such as a desk or table, printed on the silicone rubber is 3000mAh designed by Voopoo. Remember this is a sample version so SAMPLE is also printed on it. The tiny hole in the center is for ventilation of the internal 3000mAh battery.





Turning our attention up top you'll notice the different looking top plate keeping with the shape of the Argus MT, if you wish to use another atomizer on the MT a 28mm will fit.





The front face has a nice clean look and notice how well the the match of color is with everything. Above the display screen is the Power/Fire button and below it are the Adjustment buttons with a - minus and + plus symbol engraved on them.

Above the adjustment button is a locking switch which I've really come to love on several devices that I have reviewed including Voopoo. What's a bonus is that the switch is level to the display screen having no bump out of a switch.

When the switch is engaged it locks all operation of the device instead of the usual 5 presses of the Power/Fire button which you can still do if you choose making for a quicker safe mode of pocket carry.

With the Argus MT being a IP68 rated device you know the charge port needs to be covered and it is using a drop down door cover. As you can see the display screen is very bright with easy to read numbers but I wish the wattage and fonts were the same size for easier reading. I always leave a screen protector on if provided for as long as I can and it's on in all of my photos.


SCREEN LAYOUT - TOP TO BOTTOM / LEFT TO RIGHT

* Wattage/Temperature Selected

* Power Mode Selected

* Battery Percentage % / Battery bar

* Puff Counter

* Ohms

* Volts

* Seconds Of Last Vape





The Argus MT menu system is a very simple and easy one to navigate using only a couple of button combinations that I will list below.

MENU SYSTEM

* On/Off - 5 Quick Presses Of The Power/Fire Button

* To Enter The Menu System - Press And Hold Both Adjustment Buttons Simultaneously

* Once In The Menu Use Either Adjustment Button To Move To The Mode Or Setting Selection, Once There Press The Power/Fire Button To Open it, Once Your Selection Is Made Press The Power/ Fire Button To Lock In And Activate Your Selection


I have to say that Voopoo has done it again releasing another winner of a Kit with the Argus MT. Hand fitment is great with thumb or finger fire and it has a good weight to it, not light or heavy either. Build quality of the device feels above average with no button rattle and a nice tactile feel to them with a audible click from all the buttons. There is no lag in firing of the device what so ever. I would suggest sticking with the 0.3Ω coil for battery life and very good flavor as well, but for me the 0.2Ω coil does edge it out in flavor.





PROS

* Attractive

* Solid Build

* Easy Menu

* Bright

* Vivid

* Very Good Flavor

* IP 68 Rated

* Lock Switch

* 3A Charging


CONS

* Wattage And Font Size Should Be of Equal Size

* Lanyard Ring


FINAL IMPRESSIONS


A big thumbs up to Voopoo on the release of the Argus MT Kit, it seems that in the past 8 months that Voopoo has really stepped up their game releasing winner after winner of devices and kits from pods to full sized kits of which several of each are in my daily rotation of personal use.

I would think most if not all of you can agree that the MT is a very attractive device alone but looks don't make a winner. The reason I consider it a winner is the vape that I get from the kit including the Matte Tank and TPP Coils, very flavorful with more than enough vapor.

Using the supplied 0.3Ω coil rated for between 32-40w and a best setting of 35w I never needed to exceed the minimum of 32 watts for very good flavor so this coil will last a little bit longer vaping it at it's minimum recommended wattage and help preserve battery life.

Using the 0.2Ω coil rated for between 40-60w and a best setting of 50-55w I found my sweet spot at 52watts. Out of the 2 coils I prefer the 0.2Ω because it edges the 0.2Ω coil out by a bit with flavor in my opinion, every vaper is different so my findings might be different than yours but both supplied coils put very good flavor.

Being a IP68 rated device will go to waste for me because of it's beauty this will never leave my desk let alone be on one of my construction jobsites plus being White I wash my hands before touching it. LOL

Having 3A charging is also one plus that lets you come to a full charge quickly and something I forgot to mention is that when charging little animated bubbles rise from the bottom of the display screen like carbonation bubbles from soda, very cool looking!

The lock switch work great and I wish every device had one, I know it takes not time to press a button 5 times quickly but sliding a switch is quicker when putting it in a pocket and also quicker when ready to vape again.

I really like the Turbo mode getting that little added kick of power at the beginning of a vape, for most people the Smart mode will prove beneficial preventing accidental wattage adjustment over the maximum wattage for the coil installed.

I would like to thank Nical and Voopoo for providing the Argus MT Kit for the purpose of this review and I hope that I answered all of your questions about the Argus MT Kit.

THANK YOU
BIGBOB2322