• Locked
Pairing Wotofo PS Dual Mesh RDA

I had Profile RDA for a long time and it was one of the best atomizers I had tasted. Recently I found out that its successor came out (with an even better flavor). The problem is, I can not choose a good mod for it. I really like Aegis Solo, it is compact. Do you think that these two would be a good pair? Wouldn’t the atomizer overhang? (I can not find the exact parameters of Aegis Solo). Or maybe someone could recommend better fits? Thanks in advance:)))

  • Locked
FREEMAX FRIOBAR R5000 RECHARGEABLE (10 flavors) REVIEWED BY BIGBOB2322

Hello once again folks and welcome to today's review of a disposable device from Freemax that has a 700mAh rechargeable battery and has a juice capacity of 12mls of pre-made juice with 10 flavor choices. Freemax's FM Salt Coil Tech and Tea Fiber Cotton are present in the Friobar R5000 just like their replaceable coils, so without further ado let check out the Friobar R5000.

friobar-R5000.jpg



FLAVOR CHOICES - Strawpina Colada, Lemon Tart, Cheesecake, Apple Duet, Strawberry Melon, Lemon Mint, Pink Lemonade, Purpleberry Ice, Blue Razz, POG


FRIOBAR-R5000-bg_07.jpg



SPECIFICATIONS

Pod Capacity: 12mL
Puff: Up to 5000 puffs
Nicotine Strength: 50mg/mL or 20mg/mL
Battery Capacity: 700mAh
Charging: USB Type-C
Coil Resistance: 1.2ohm
Size: 114.96*28.15*28.1mm

FRIOBAR-R5000-bg_10.jpg



FM COILTECH


FM SaltCoilTech
Industry-Leading Nicotine Salt COILTECH Creatively Applied
to a Disposable Pod
Strong Throat Hit and Intense Nicotine Satisfaction


FRIOBAR-R5000-bg_04.jpg



RECHARGEABLE BATTERY WITH TYPE-C


Rechargeable Battery with
USB Type-C Port
A built-in rechargeable 700mAh battery with a USB Type-C
port for your convenience of fast charging

FRIOBAR-R5000-bg_0003.jpg



RESIN DESIGN


Classic resin design with multi-colored fluid lines and
a high-gloss surface, making you fall in love with it.

FRIOBAR-R5000-bg_06.jpg



TEA FIBER COTTON


Freemax Patented Tea Fiber Cotton Formula - Refreshing
Your Flavors!
Industry-Leading Tea Fiber Cotton Formula Creatively
Applied to a Disposable Pod

Tea Fiber Cotton Formula
Antimicrobial, fresh and lasting
vaping experience

FRIOBAR-R3000-bg_04.jpg



MANY FLAVOR OPTIONS


Diversified Flavor Options
Each Flavor with Customized Coil & Cotton Adjustment
Art of Balance for Vapor, Flavor, Throat Hit and Nicotine Satisfaction

FRIOBAR-R5000-bg_07.jpg



UNBOXING - Freemax sent their entire assortment of flavors for the Friobar R5000, these are 50mg/ml Salt Nic. There is also a 20mg/ml version as well.


20220312_105523.jpg





All the devices are nicely packaged in individual boxes and are sealed in a thick plastic wrapper. I was surprised at the size and solid feel being a disposable vape but this is a 12ml pod with a rechargeable 700mAh internal battery that boast having the ability of 5000 vapes before dead or empty of juice.


20220305_080613.jpg


20220305_081117.jpg



After removing the device from the plastic wrapper I plugged them all in for a quick topping off of the 700mAh internal battery and all were 100% fully charged, the type-c charge port is located on the bottom of the device. There is a tiny hole above and below the charge port, 1 is a airflow intake and the other has a tiny Blue Led that lights up when charging or vaping. Freemax uses a couple of safety measures to insure that the R5000 wont operate until you remove them, one is a sticker over the airflow intake and the other is a small silicone rubber plug in the mouthpiece, both need to be removed. With the Friobar R5000 being a auto-draw only device these 2 protections insure it arrives to you in a safe manner.

20220305_081245.jpg


20220305_123502.jpg



The 2 flavors that were shown first were the BLUE RAZZ and APPLE duet so I'll start there but before the flavor review let me tell you that the draw of all the flavors is a very loose MTL and can be vaped as a somewhat RDL if one is so inclined to do so, also some of the flavors get better after a short break in time of about 10 - 15 vapes.


BLUE RAZZ

The flavor on this is very true to form with a hint of ice that's not strong but rather enhancing to the flavor notes, never got a freeze in the throat or mouth. The flavor on this selection was too intense out of the gate but after a few vapes it settled down to a great tasting Blue Raspberry with a little kick of ice mixed in, I found the flavor to be very refreshing and flavorful and out of all 10 flavors this is my favorite. ( VERY GOOD ).

APPLE DUET

This flavor also has a hint of ice and was very intense at first, when I say intense there was too much flavor where it didn't compliment the whole profile of tart and sweet Apples but after a series of vapes as most of these flavors do it settled down to a better taste. To me I get more of a candied tart sour Apple than a sweet Apple, my rating on this flavor (GOOD).


CHEESECAKE AND PURPLEBERRY ICE


20220312_073136.jpg



CHEESECAKE

First off this flavor has the least amount of ice that's barely there and the Cheesecake was the only one out of all 10 flavors that need no break in time, the flavor is very spot on and you can taste the different notes of a Graham Cracker, smooth and creamy custard with no sourness to be found. This is easily my 2nd favorite out of all the flavors (VERY GOOD).

PURPLEBERRY ICE

As the name implies you can really taste the ice in this flavor as well as a mix of various berries and maybe just a hint of Grape, at least that's what it tasted like to me. The flavor is more of a candied one and hard to define any one berry in it because the mix melds them together thoroughly, for me the ice was very strong and needs to be toned down a bit and I also get a somewhat perfume taste to it. (NOT A FAVORITE BY ANY MEANS)


LEMON TART AND PINK LEMONADE


20220312_072431.jpg



LEMON TART

This flavor also has a very tiny tinge of ice in it with a tart lemon flavor that really took some time to tone down, almost all the flavors started off very overpowering with flavor with this one being the longest to tone down having a artificial sort of nasty taste to it but after about 20 vapes the intensity lessened and the tart lemon started to come through. I would have to say it still has a artificial candied taste that was alright but just not a favorite to me (OK).

PINK LEMONADE

This also has a very small hint of ice but it really compliments this flavor very nicely. It has a sweet and tart profile that are blended together very well giving it a refreshing taste that actually gets better the more you vape it, this would be a great flavor to vape on a hot and steamy summer day, a great Pink Lemonade mix (VERY GOOD).


LEMON MINT AND STRAWPINA COLADA


20220312_075750.jpg



LEMON MINT

The Lemon Mint is a really nice flavor of sweet and tart melded together with a touch of mint that really makes this flavor pop, I think there is another flavor included in this mix but I just can't identify what it it but at any rate this is a very nice flavor. I would say that this is another one for a hot steamy summer day (VERY GOOD).

STRAWPINA COLADA

This flavor has very little ice but Strawberry, Coconut, and Pineapple are very prominent, on the inhale you get the Strawberry and Pineapple with little to no Coconut except on the exhale when the Coconut really pops. As a mix of flavors this one became better with more vapes as well and I really liked it (VERY GOOD).


STRAWBERRY MELON AND POG


20220312_082217.jpg



STRAWBERRY MELON

This is another one with just a hint of ice included in the flavorings, the Strawberry is very pronounced and kind of overpowers the Watermelon, the flavor is candied to me and very strong. I think the Watermelon has a good taste though I just wish that they were equal in strength because it would blend them into a better flavor. Flavor grade is just (OK) for me.

POG

I have to tell you straight away that I have had a couple of POG variations from other manufacturers and really didn't like them and this was no difference, I can't really give you a opinion on this flavor because I don't like the Passion Fruit or Guava as a flavor but do like Orange by itself but mixing all 3 together turns my stomach. I have a few friends that really love POG and I let one of them try it for a day and he said it was good so on it's flavor grade I will have to take his word for it and say it's (GOOD).


FINAL THOUGHTS OF FLAVORS AND DEVICE


First off I would like to talk about the device, having a rechargeable 700mAh battery on a disposable is great and because the Friobar R5000 has a 12ml Pod and a vape capacity of 5000 hence the name of the device there is no other way to to accomplish using it except with a rechargeable battery.

All of the devices came fully charged and I have used almost all of them everyday for a period of 9 days not exclusively but quite a bit daily and have yet to drain the battery to shut off (VERY IMPRESSED). Using a 1.2Ω coil helps battery life.

I've already gave you my findings on the flavors with most getting a passing grade and a few getting better than just a passing score. My favorite 3 flavors of the lot are BLUE RAZZ being best followed by CHEESECAKE being my 2nd favorite and my 3rd choice is PINK LEMONADE.

I know that taste is very subjective and what I like you may not and vice versa but one thing I can say is all of these selections have flavor and it's not weak flavor either but very satisfying. All the devices performed well with no spit back or gurgle and the loose airflow is smooth.

I would like to thank Tina and Freemax for sending all the flavors in the Friobar R5000 line.

THANK YOU
BIGBOB2322

Attachments

  • 20220312_072431.jpg
    20220312_072431.jpg
    892.4 KB · Views: 13
  • Like
Reactions: hittman

  • Locked
On the hunt for a Dark Horse alternative

Hello!

I'm hoping you guys can possibly help me out.
When I quit ciggs and switched to vaping, I lucked out by trying out HHV very early on and I found my perfect vape juice, Dark Horse, and stuck with it. I stocked up with as much as I could when they announced their closing, and i'm now halfway done with my last bottle and trying to find something that is comparable. I know I likely will never find a replicate of the flavor, but something close will do! I still use my Joyetech Eroll Mac (I really like cig-a-like models, which are almost non existent now too so I'm likely going to have to figure out a new setup as well.) and find that the few new juices I've tried have totally just eaten through my carts.
I've tried Blacknotes Virginia and Cavendish. I think I need to let them steep a little longer cause initially they were both really not it for me, but Virginia has already started to mellow out, and I've started mixing it with Dark Horse to maybe acclimate to the flavor a bit, but like I said, it ruins my carts within a day of doing that. Possibly faulty carts as well since thats pretty common for the Eroll. But it lacks that little bit of like...spicey sweet (??) that Dark Horse has.
I also tried Cuttwood Tobacco Trail and its waay too sweet for me.

Would anyone have any recommendations? I don't remember what it said on the HHV website other than Dark Horse was a cigarette and pipe tobacco blend. I wish I had contacted them before they closed up to at least ask what the flavor notes were cause I really have no idea what the specific taste is, I just know it's delicious and perfect haha.

Thanks so much in advance for any help or recs you guys can give me!

  • Locked
Sub Ohm tank with Salt Nic

So i have a dual battery Geek Vape mod that drops all the way to 5W and goes all the way up to 200, not sure the exact model. My tank is a Fireluke mesh quad coil sitting at .16 ohms. Now my question is i have a 25mg bottle of salt nic that i am wanting to use for the time being till i get paid to get my regular vape juice instead of going back to cigarettes. If i were to use the Salt nic that i have in my current setup what W should i run it at to where i wont make myself sick or potentially get nicotine poisoning?

  • Locked
Are Chinese Sanctions Imminent? Something new to worry about.

It is being reported that because of the Ukraine conflict and China's support of Russia that sanctions could be levied against China as well. Since 95% of vape hardware including coils comes from China this could have devastating consequences to the vape community. IMHO the probability of this happening is very low, but you may want to keep an eye on this. Just more stuff to worry about.

Login to view embedded media
https://tass.com/world/1419719?utm_...m_campaign=google.com&utm_referrer=google.com

  • Locked
Reliable mods?

Hello all
I've been vaping for over ten years.
I really like it, and it saved my life getting me off of cigarettes.
However I have a problem, which seems to be getting worse
I have had Smok, Vooooo, and others.
Mods work great for a while, but invariably go bad.
Either they just quit working, or the display goes out. Needless to say, it's very frustrating.
My latest mod is a smok Luxe 2.
I love it at first. But now, after only two months, the display is black.
All I see is luxe 2 at the top.
And I can't adjust it or see my battery levels.
It works, but I'm flying blind.
Does anyone know of a mod that is actually reliable and won't just stop working or lose the display?.
I don't want to give up vaping, but being retired on a limited income, it's getting too expensive.
Any advice would be appreciated.
Thanks.
.Ronnie
  • Like
Reactions: ShowMeTwice

  • Locked
[Giveaways]-YOUMEIT- Drop2 are now officially released!

Hi ECF,

YOUMEIT hope you have a good weekend. Drop2 have already released, we Youmeit are here to give your guys a bonus:banana:

:thumb:Brand new Craftsmanship.:thumb:
Smalll body with big power
Type -C fast charge


YOUMEIT -Always Suprise for You and Me
Drop 2-Give you speical suprise.:mail:

upload_2022-3-12_18-19-9.jpeg



Giveaway# Wanna one to be free?

:rickroll:

How to enter :
1.Visit the Drop2 product page for more information about the Suorin drop2 and register on our website
2.Comment down below what was the first device you used and When you know about YOUMEIT online store?
3.Mention 3 friends+ about our Giveaways. :thumbs:

:banana::banana::banana:
Giveaway Rules:
1.Winners will be announced on March 23th.2022
2.More entries,more Chance
3.Winners can choose your favoriate color your want.;););)

Good luck guys! Let me see who are the winner:blink:

Best Regards,
Chilly

Attachments

  • thumbup1.gif
    thumbup1.gif
    770 bytes · Views: 13
  • Like
Reactions: Timbo87

  • Locked
WOTOFO RECURVE V2 RDA review by hittman

It’s my pleasure today to be back with my second review for Wotofo. This time out I’ll be taking a look at the Wotofo Recurve V2 RDA. I wish I could compare the original with this one but sadly I cannot. I would say that probably until the last year or so I almost never used rdas. Doing reviews has gotten me familiar with many of the more current ones but I never had a chance to try the original Recurve although I have heard good things about it and every once in a while I see someone trying to find one. The V2 is an interesting design to me. Besides obviously having a curved body and tip, it comes with two airflow adapters depending if you want to run single or dual coil in it. I’m hoping that this actually works since many dual coil tanks don’t do that well with single coils. It’s recommended for either two 3mm coils or a 5/3mm single coil which I assume means you can run anything from a 3 to a 5mm single coil. It has honeycomb airflow on it which I have learned that I like very much on other tanks that I have tried with it. The base of the tank is 24.6mm so it should fit well on most mods.


GZiZs1c.jpg


6jePULk.jpg


WHAT’S IN THE BOX?

1* Wotofo Recurve V2 RDA

1* 5 mm ID Dual Core Fused Clapton 0.65Ω

1* 5 mm Thick Cotton Strip

2* 3 mm ID Framed Staple Clapton 0.33Ω

2* 3 mm Thick Cotton Strip

2* Airflow Adaptor

1* 5 mm Coiling Rod

1* Cross Head Screwdriver

1* Allen Key

1* Accessory Bag

1* User Manual

sK8Jqrr.jpg


TkW8Jm1.jpg


SPECIFICATIONS:

Diameter 24.6mm

Height 35.55mm (with drip tip & 510 pin)

Material Stainless steel

Drip Tip 810 delrin drip tip

Coil Type Wire coil

Coil Config 3mm ID dual coils, 5mm/3mm ID single coil

Juice Feeding Method Drip/squonk

Insulator Material German PEEK

Threading 510 thread

Color SS, Black, Gunmetal, Gold, Blue, Rainbow

AZtDNPo.jpg


FEATURES:

1. Curve design for the drip top and RDA body

2. Two airflow adapters to adjust airflow and enhance flavor

3. The slot-honeycomb for smoother airflow and better vaporization

4. Restrictive/exploration/full open airflow control mode

5. Supports 3mm ID dual coils and 5mm/3mm ID single coil

6. A true postless deck for easy and fast building process

7. Φ24.6mm, 510 thread, 2ml e-liquid juice well

eBU60sg.jpg


soaULZ7.jpg


gqosYuJ.jpg


SW8KVpB.jpg


TpAQdiJ.jpg


7KjsgPB.jpg


fYNNBFC.jpg


qAdvlZq.jpg


INITIAL THOUGHTS:

The packaging for the Recurve V2 is the usual black and green packaging that I’ve seen their devices come in before. On the front is the Recurve name along with the text showing that it was a collaboration between Wotofo and Mike Vapes. I’m a little surprised it didn’t say Recurve V2 on the front.

On one side of the outer shell it shows the package contents which is actually quite a bit of stuff. Besides the tank itself, there are two 3mm coils, a 5mm coil, two airflow adapters, two 3mm cotton strips, a 5mm cotton strip, a Phillips head screwdriver for the deck, an allen wrench used to change the center pin from solid to the squonk pin, a coiling rod that is 3mm on one end and 5mm on the other, user manual, and accessory bag.

The back of the shell has a warning stating that it is an electronic cigarette and a couple other warnings along with designed by Wotofo and Mike Vapes again in case you didn’t see it on the front.

upload_2022-3-12_8-1-54.png


upload_2022-3-12_8-2-13.png


upload_2022-3-12_8-2-57.png


The V2 is easy to disassemble for cleaning. As a matter of fact, the first sample that I received was defective and the outer barrel would slide off very easily. I notified Wotofo and they sent me replacement that worked correctly. Despite the outer barrel being very loose, I was able to test the rda after cleaning it. I just couldn’t pick it up by the outer barrel. The rda is made up of five parts. There is the drip tip of course, the top cap that you turn to adjust the airflow, the outer barrel with three horizontal slots on each side, the build deck, and one thing that’s different is the airflow adapter. The one in the picture is the larger one designed to be used with the two 3mm coils that are included. The base of the V2 is just under 25mm so should fit on most mods.

The build deck has four grub screws so you can insert your coil whether it is wound clockwise or counter clockwise. The grub screws are a Phillips head screw which I like much better than the slotted screw heads used on many tanks. On the bottom is the Recurve name etched and also the Mike Vapes name again. I’m beginning to think he might have had something to do with this one.

The V2 has very deep wells for the liquid. It can hold about 2ml of liquid. Also the deck shape is curved inward so if you are dripping the liquid will run down to where it needs to go.

upload_2022-3-12_8-3-47.png


upload_2022-3-12_8-4-6.png


upload_2022-3-12_8-4-22.png


upload_2022-3-12_8-4-40.png


There are two different airflow adapters included. You can see in the picture that the top opening is larger in one than the other. There are three rows of honeycomb airflow holes on each side of each of the adapters. I’ve learned over time that I really like honeycomb airflow on rdas. On the bottom side of each airflow adapter are two pins that align with the holes in the build deck that hold the adapter securely in place. The airflow adapters restrict the chamber size in order to provide better flavor. I’d say they are doing a pretty good job at it. Oh, and look there’s that Mike Vapes name on the top of both airflow adapters. I hope you know I’m just joking around. I like Mike Vapes reviews but was just joking around about how many times his name is on this rda.

upload_2022-3-12_8-5-27.png


gbIzqBo.jpg


I tried the 5mm coil first with the adapter with the smaller opening on top. I was pleasantly surprised with the great flavor I was getting from it using a liquid that I am very familiar with and use for a lot of my reviews. After running the 5mm coil for a week or so, I installed the included 3mm coils and used the adapter with the larger opening. Once again the flavor produced was great. About the only thing I noticed different between the two setups was that the vapor seemed more dense with the dual coils but as far as flavor quality I would say it was very close.

Once the coil and wick are installed, you put the adapter on the deck with the pins aligning with the holes in the deck. Then put on the outer barrel and top cap. When you put the outer barrel on then turn it until it locks into place. The airflow adjustment is done with the top cap and you can expose as many or few holes from the adapter as you want. I found that I liked it mostly with one row of holes open. If you like big air then you can really open this one up if you want to.

CqlN9x8.jpg


8TvDHXN.jpg


FINAL THOUGHTS:

I have to say that I very much enjoyed testing the Wotofo x Mike Vapes Recurve V2 RDA. I really don’t have anything negative to point out on this one. I plan on keeping it in rotation for some time to come. Whether you prefer single or dual coils in your rda, this one does both exceptionally well in my opinion. Such a great flavor producing rda. One thing I have not tried yet is using a single 3mm coil. I will have to give that a shot sometime.

I don’t know if anyone has done anything quite like the airflow adapters used in this rda but think it is really an ingenious design and functions well. With the pins that go into the base you can easily take the outer barrel off without bothering the airflow adapter. Of course the first one I received was very loose but was corrected with the replacements. I asked Mike Vapes about my issue and he said his samples were fine. I’m sure it was just a fluke. It had better be because I’ve already ordered two more. Wotofo was nice enough to send two replacement tanks and both work perfectly like they should and the outer barrels are tight like they should be.

I’m not a big dripper person so immediately put the squonk pin in my sample and ran it on my current favorite squonk mod. I knew when I saw the honeycomb airflow on this rda that I was probably going to like it since I had good results with others with that type of airflow.

So, would I recommend the Wotofo x Mike Vapes Recurve V2 RDA for you? Well, if you like to use rdas whether it be to squonk or drip and like very good flavor with plenty of vapor production and fully adjustable airflow then absolutely YES!

I’d Like to thank Wotofo and Cara for sending the Recurve V2 RDA for this review. Thanks also to the readers that have successfully made it to the end of another one of my reviews. Below is a link to the website if you would like to check it out for yourself.


Wotofo Recurve RDA V2 - Designed For Flavor Chasing

upload_2022-3-12_8-12-9.png


upload_2022-3-12_8-12-25.png

  • Locked
The Popular Vaporizer Kit Releafy Torch Dab 1100mAh 30W

The Releafy Torch Dab is the first dab kit that offers true precision temperature control. Choose from four temperature settings ranging from 330-480°F while TC mode keeps the selected temperature stable.
releafy-torch-dab-1.jpg

Activate the intelligent auto-heat mode by pressing the firing button twice, allowing 30 seconds to dab without needing to hold the firing button down. The ceramic chamber creates pure aroma and flavor and is much easier to clean than dab pens that contain a coil.

The top airflow design makes for cooler vapor and larger production, and also prevents leakage. Reach a full charge in just 50 minutes using the included Type-C charging cable.Go to vape store to buy.

Quick Link:Releafy Torch Dab Vaporizer Kit 1100mAh 30W

  • Locked
Oldest Billet boxes

Two Priests walk into a bar...

Open casting call for Rev 1.1, Rev 2, R̵e̵v̵ ̵3̵(found one in my stash)!

I'm looking to flesh out my collection, hunting for early models, if you have one, and care to movie it along, please contact me. Paraphernalia also sought: refillers, tanks, rebuildable cartos, integrated tips, pouches etc.

Thanks!
  • Like
Reactions: DPLongo22

  • Locked
[Vapesourcing Giveaway] - Win Smok RPM 5 Kit for Free - 3/28

Hello friends, we bring a new round of giveaways and the prize is the new Smok RPM 5 Kit. We wish you like it.

Smok RPM 5 kit or a Smok RPM 5 Pro kit are nearly identical pod kits. Smok RPM 5 Kit uses a 2000mAh integrated battery, while the RPM 5 Pro uses a single 18650 battery. Both feature 80 watts of power, 6.5mL pods, RPM 3 mesh coils, beautiful designs with 8 color options, variable power modes, full-color displays, adjustable airflow, and a USB-C charging system.

More details about this kit can see in SMOK RPM 5 & RPM 5 Pro Pod Mod Kit 2000mAh 80W
smok-rpm5-rpm5-pro-kit_(18).jpg



Simple to enter:

1. Do you like Smok vape brand products, which one do you like best?

2. Which new Smok brand products do you like best recently?

3. What brands of disposable vape kits do you know? How popular are they with you in your country?

Note:
1. Due to the suspension of logistics, we are temporarily unable to ship to Russia and Ukraine, please understand.
2. You must be 21 or older.
3. The contest will end on 03.28.2022 and one winner will be chosen via random.org.
4. Number your replies.
5. Each entrant with no more than 3 replies.

  • Locked
Brand Weekly Flash Deals On ElegoMall

Famous brands on sale! Each brand only participates in the event for 3 days. Don't miss the chance to save money!

flash-deal_scvM9.png


Promotion Details:

There are 5 coupon codes for 5 brands, each one works for the specific brand products.

Here they are:

SMOK (Time Over)

Uwell (Coupon: EMUWE)

VOOPOO (Coupon: EMVPO)

Vaporesso (Coupon: EMVPS)

Smoant (Coupon: EMSMN)

Learn More: https://elegomall.com/brand-weekly-flash-deals.html

  • Locked
Newbie to forums

Hello all I'm Jack been vaping for quite a few years now after smoking a 20 pack a day, the reason I am here is because iv got the new freeMax m pro tank and I'm having a problem with the life span of the coils, they seem to be only lasting me 3 days max and from what iv read about the tank I should be getting 2-3 weeks out of them, I'm quite a normal vaper ( not to heavy but i do vape often) at work I only vape on my brakes for 5/10mins twice a day, I'm running it on a AEGIS mod at 75w using the M2 0.2 coil which is capable between 60-90w am I doing something wrong/something I should be doing to help the life of these coils?
Thankyou

  • Locked
Geekvape Aegis X Kit with Zeus Sub Ohm Tank

170gsu4au5351.jpg


Geekvape Aegis X Kit consists of Max Box Mod and Zeus Sub Ohm Tank. The Aegis X, made of durable zinc alloy, is proofed against dust, shock, and water, and continues the IP67 protection level of the Aegis series. Geekvape Aegis X is powered by a single 18650/21700 battery and has a built-in advanced chipset, which can provide a maximum output power of 100W. It has Variable Wattage, Temperature Control (nickel, stainless steel, and titanium coils), TCR, Bypass mode, and variable power curve(VPC). Thanks to bypass mode, the vape mod can be rigged to harness the raw power of the cells. VPC allows the vapers to control the wattage for each second of operation. Raise or lower it to get hard throat hits or mellow and pleasurable experiences. Moreover, the Aegis X is equipped with all the typical safety features of a box mod, such as 10-second cut-off, short circuit, overcharge, overheat, over-current and anti-dry protection. Aegis X is paired with Geekvape Zeus Sub Ohm Tank via threaded 510 connection.

The Geekvape Zeus Sub Ohm Tank features the leak-proof function and can hold up to 5ml within the confines of the larger bubble glass and 3.5ml in the smaller replacement glass. With the top refilling design, you can be comfortable to fill e-liquid without dirty hands. Zeus Tank comes with an innovative quick-change prebuilt coil system that creates the purer flavor and massive vapor with the GV mesh coil. Furthermore, the integration of direct top airflow and top-to-bottom airflow is available to generate big clouds and enhance nice airflow. The quick slide coil design makes coil replacement quite easy.

Kit Features:
  • Quick slide coil design
  • High-grade KA1 Mesh coil
  • 2.4" OLED screen for a vivid display
  • Equipped with advanced AS2.0 chipset
  • IP67 waterproof/ shockproof/ dustproof
  • Direct top airflow and top-to-bottom airflow
Product Specifications:

Aegis X Mod
  • Size: 90x 31.3x 56.1mm
  • 2.4" OLED color screen
  • Power output: 5- 200W
  • Working temp: -10- 45℃
  • Charging requirement: 5V/ 2A
  • PCBA temperature alarm: 80℃
  • Standby current: Less than 10uA
  • Resistance range: 0.05ohm- 3.0ohm
  • Temp range: 100- 315℃/ 200- 600℉
  • Powered by dual 18650 batteries (Not included)
  • Menu: Auto/ Theme/ Color/ Version/ ABB/ Reset
  • Mode: Memory (M1-4)/ Power/ TC (SS, Ni, Ti, TCR)/ VPC/ Bypass
Zeus Sub Ohm Tank
  • Size: 26x 42.5mm
  • Drip tip type: 810
  • Juice capacity: 5.0ml
  • Filling method: Top fill
  • Mesh Z1 coil: 0.4ohm, 60- 70W
  • Mesh Z2 coil: 0.2ohm, 70- 80W (Pre-installed)
Package Content:
  • 1 x Aegis X mod
  • 1 x Zeus Tank
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Spare Parts Pack

  • Locked
VooPoo Vinci 2 Pod Kit

voopoo-vinci-2-vinci-x-2-kit_OuQmi.jpeg


VOOPOO VINCI 2 - Through exquisite technics, intelligent upgrades of performance, on the basis of the original VINCI series, it is fully optimized to meet a variety of vaping needs, bringing ultimate experience. VINCI 2 features the ease of use of the Pod system and retains the traditional MOD's big cloud and adjustable power make it smaller, easier to operate, and safer to use. The body is in the shape of a rectangular cuboid with rounded edges to achieve the best ergonomics and is coated with a smooth zinc alloy surface coating, which looks modern and stylish from all angles. VINCI 2 has a built-in 1500mAh battery, long-lasting to reduce frequent charging, and can be quickly charged through the Type-C charging port. Provide button/draw-activated modes. Whether it's Manual or Auto mode, VINCI 2 can bring surging smoke the first time. VINCI 2 powered by the upgrade Gene.AI 2.0 chip, not only has the classic Variable Wattage (max. 50w) but also provides a SMART mode and RBA mode. The smart SMART mode can identify the resistance of the coil, automatically adjust the power output accordingly, and at the same time limit the power upwards to avoid overload and the coil becomes scorched. In RBA mode, vapers can fully control VINCI 2, and all settings can be made individually, allows you to break the power limit.

In the VINCI 2 Kit, a VINCI 2 Pod made of transparent PCTG is used. The pod can replace the coil, contains 6.5 ml of e-liquid, and is compatible with all coils in the PnP series. The design of the pod makes it almost 100% leak-proof, and the transparency allows you to observe the liquid level well. The integrated mouthpiece with an ergonomic duckbill design fits comfortably on the mouth and provides an excellent vaping experience. The newly upgraded coil can provide a strong taste experience and produce very good vapor. VINCI 2 is compatible with 0.3ohm PnP-VM1 and 0.8ohm PnP-TM2 coils and provides the best purification effect for e-liquid salt and nicotine salt respectively. The slider on the side of the mod can be used to continuously and comfortably adjust the airflow and the resulting resistance from a stricter MTL to a more open RDL. Slide the slider left and right to adjust your favorite flavors. Therefore, every vaper can use VINCI 2 to quickly and easily find the correct settings for their vaping behavior.

MOD Parameters
  • Material: Zinc Alloy
  • Output Power: 5-50W
  • Output Voltage: 3.2-4.2V
  • Resistance: 0.15-3.0Ω
  • Battery Capacity: Built-in 1500mAh battery
Pod Parameters:
  • Capacity: 6.5ml
  • Material : PCTG
  • Resistance : 0.3Ω (PnP-VM1), 0.8Ω (PnP-TM2)
Package Content:
  • 1x Vinci 2 Device
  • 1x Vinci 2 Cartridge (6.5ml)
  • 1x PnP-VM1, 0.3Ω
  • 1x PnP-TM2, 0.8Ω
  • 1x USB Cable
  • 1x User Manual

  • Locked
SMOK RPM 4 Kit

maxresdefault (5).jpg


SMOK RPM 4 Kit perfectly complements the RPM series, is more compact and more convenient, and is especially suitable as a device for beginners who want to use DL vaping on the go. The ergonomic cigarette holder of the pod ensures a pleasant and comfortable taste during vaping, while the simple user interface ensures intuitive operation. Despite its small size, the 1650mAh built-in battery can ensure long-term vaping fun. The battery can provide ample power and strong performance for each puff. Once the power supply disappears, the small pod system can be fully charged again in a short time through the Type-C connection, allowing you to focus on vaping and prepare for new possibilities. The RPM 4 vape kit can achieve an output power of 5 to 60W, which can utilize the full potential of RPM and LP2 coils. Whether you like thick vapor or pure taste, a wide range of power adjustments can make you enjoy endless aftertastes, resulting in a pleasant taste. The chipset itself can recognize many parameters, and the user will receive detailed information about the coil used and the output. Featuring a 0.96 inch TFT display - rich vape data and customizable theme colors are perfectly matched to provide a more intuitive vaping experience.

SMOK RPM 4 Cartridge is compatible with different coil series. SMOK RPM 4 LP2 Pod is compatible with two LP2 coils; SMOK RPM 4 RPM Pod is compatible with all RPM coils. Both have a capacity of 5ml and can provide a continuous atomization experience. They have a consistent flavor and pleasant enjoyment. More details to winning your favor. A duck-billed mouthpiece is used on the top of the pod, lock the great taste in your mouth. Transparent oil window design shows the consumption and remaining volume of the e-liquid, easy to check. There are four small magnets at the bottom of the pod, firmly connected to the mod. Facilitate the assembly and disassembly of the pod. The package comes with a new LP2 coil installed in the pod. This is SMOK's new coil series. The leakproof protection function has been modified so that these coil heads will not waste a drop of liquid. Both LP2 Pod and RPM Pod support infinitely variable airflow. There is an airflow slider on the back of the mod. RPM 4 can change the taste between DL and RDL when dragging the slider to the left or right.

Specifications:
  • Size: 103m*25*27.9mm
  • Weight: 102g/107g*
  • Battery Capacity: 1650mAh
  • Power Range: 5W-60W
  • Standby Current: <100uA
  • Input Voltage: 3.3V-4.2V
  • Output Voltage: 0.8V-4.OV
  • Resistance Range: 0.2Ω-2.5Ω
  • Charging Voltage: 5V±O.2V
  • Charging Current: Max 1.5A
  • Overcharge Voltage: 4.3V±O.05V
  • Overcharge Current: 2A±O.6A
  • Over-discharge Voltage: 2.4V±O.05V
Package Content:
  • 1x RPM 4 Device (1650mAh)
  • 1x RPM 4 LP2 Pod (LP2 Meshed 0.23Ω DL Coil Preinstalled) (5ml)
  • 1x RPM 4 RPM Pod (RPM Mesh 0.4Ω Coil Preinstalled) (5ml)
  • 1x Type-C Cable
  • 1x User Manual

  • Locked
VooPoo Vinci Pod Kit

VOOPOO-Vinci-Pod-Kit-Cover.jpg

VOOPOO VINCI Pod System Kit is the latest to use stylish CMF design on outfits, compact and lightweight, easy to carry. Features built-in 800mAh battery and smart GENE Chip planted, the output power up to 15W. The VINCI Pod combined with the new tech. in vaporization, pre-install 0.8ohm coils and equipped with a leak-proof design that makes VINCI Pod Kit more perfect. Moreover, the VINCI pod cartridge has an air-inlet ring that the airflow can be adjusted to bring a more amazing taste!

VooPoo Vinci Pod Kit - The Voopoo Vinci Pod Kit includes the all-in-one Vinci pod system powered by an internal 800mAh battery offering up to 15W of power output. The pod is accompanied by the Vinci pod cartridge with an e-juice capacity of 2ml and a 0.8ohm resistance. The Pod device is made from durable zinc alloy and the cartridge is constructed from toughened PCTG, making the whole device rugged and safe from minor drops and bumps.

Pod Parameters:
  • Capacity: 2ML
  • Material: PCTG
  • Resistance: 0.8Ω
Mod Parameters:
  • Name: VINCI Pod
  • Material: Zinc Alloy
  • Output Power: 15W
  • Input Voltage: 3.2-4.2V
  • Resistance: 0.6-3.0Ω
  • Battery Capacity: Built-in 800mAh
Package Content:
  • 1x VINCI POD Device
  • 1x VINCI POD Cartridge, 0.8Ω
  • 1x Type-C Cable
  • 1x User Manual

  • Locked
Lost display on my Luxe 2

I have a smok luxe 2 that I only recently got. All at once the display has gone black.
It still hits okay but it's a pain to not be able to adjust it or see how much charge I have left.
My local shop guy looked at it and said probably it's the board
I hate to have to buy a new mod so soon
I've had the same thing happen to a few other mods.
Anybody else have this happen? Is there any way to fix it?
Thanks
Ronnie

  • Locked
Innokin Sensis Ki

maxresdefault (4).jpg

Innokin Sensis is a Pod Mod Vape Kit with a unique design and innovative features. It adopts the latest new vape technology to provide better flavor and longer coil life. Made of zinc alloy, using the perfect combination of glass, leather, and metal, an all-in-one device ideal for those of you looking to step up from a pen-style vape, which can support both MTL (mouth to lung) and RDL (restricted direct lung) vaping. A large built-in battery with a capacity of 3000 mAh is responsible for the power supply, allowing the vape to last all day without charging. Sensis has a variable output power range of 6-40W, with three new modes: Coil+, Refresh, and additional "Find F" mode. Coil+ mode is a new feature you can activate, primes the coil at the end of each puff by drawing in more liquid and reducing carbon on the coil, allowing for more flavor guaranteed to satisfy vapers' taste buds. Refresh allows to manually refresh the coil between puffs by providing better wicking and bringing in flavor to extend the coil's life. "Find F" is the unlockable new bonus mode, the new generation vape technology that extends coil longevity and offers more flavor over time, and is only accessible with the elusive 'Find F' code. Enter the following code when you select the locked mode for the first time: -+-++-power. Innokin reports that this mode can be used to select a frequency that boosts flavor between inhales.

Innokin Sensis Pod is a new Pod made of glass, which can significantly improve the flavor of e-liquid. It can hold up to 3.1mL of your favorite e-liquid. Compared with the traditional plastic pod, this pod is more transparent (you can check the e-liquid level more easily). Because of the underfill seal, the filling is very simple, and the sealing system prevents leakage. Sensis provides a new and upgraded Scepter S coil (0.25ohm), which can provide more power, which can make RDL play the best performance. The package also includes a spare 0.65ohm Sceptre Coil for MTL vaping. Sensis Pod is also compatible with all Sceptre coil series. With the help of the magnetic connection, the pod can be firmly fixed to the device. A detachable 510 adapter is provided for use with conventional tanks and RDA. In addition, there is an adjustment slider on the device, which can adjust the airflow under the glass pod according to your personal preference. Sensis Kit also uses environmentally friendly 100% recyclable packaging to reduce waste. This is the first of its kind in the electronic cigarette industry.

Innokin Sensis Pod Kit Specification:
  • Product name: Sensis
  • Device dimensions Without pod: 93.5x39.51x30.0mm
  • With pod: 120.35*39.51*30.0mm
  • Tank capacity: 3.1ml
  • Coil: Sceptre S-Coil 0.25Ω, 25-35W (New)
  • Coil Material: KAL + Seaweed fibre cotton
  • Changeable glass: No
  • Airflow: Adjustable
  • How to fill: Bottom filling
  • Coil compatibility: Sceptre Coils
  • Battery: Internal 3.7V,3000mAh/11.1Wh
  • Wattage range: 6-40W
  • Voltage range: 1-7.5V
  • TC range: n/a
  • Cut off time: 3-18s
  • Tank Used with Sensis tank, or with Sensis 510 adapter that can use with other tanks.
  • Max.output current: 20A
  • Resistance range: 0.2Ω-3.5Ω
  • Body material: Zinc alloy
  • Connection Magnet
  • Charging current: 5V 1.7A
  • Charging indicator: Charge bar
  • Battery capacity indicator:<20% - Red; 20%-50% - Yellow; >50% - Green
Package Contents:
  • 1x Innokin Sensis Pod Kit (0.25ohm)
  • 1x Spare Sceptre Coil (0.65ohm)
  • 1x Spare MTL Drip Tip

  • 1x Spare O Rings

  • 1x Coil Base

  • 1x 510 Adapter

  • 1x Type-C Charging Cable

  • 1x Quick Guide
  • Like
Reactions: Innokin_timmy

  • Locked
Bench Test Results: Sinowatt 34MP - 10A 3350mAh 18650…costs less, average performance

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.

81CDFE6E-1D54-4A19-B7D6-CBCCC757EE0F.jpeg B0BE36CD-20BA-482D-8AA4-0B662157BFFC.jpeg B84D899B-08AE-46BC-8AEF-00D63E646158.jpeg 5D0E330B-7473-40DB-89AC-F5B725A84FA6.jpeg


Test Results
This is an average performing cell that should be available at a lower price.
At 5A this cell performs almost as well as the EVE 33V, Molicel M35A, and Panasonic NCR18650GA. At 10A however I think you would notice the longer run time of those other cells. The Sinowatt 34MP could be a good choice though for applications where a more expensive high performance cell isn’t needed.

The two cells I tested delivered 3254mAh and 3289mAh. This isn’t great consistency for a China-manufactured cell but isn’t a problem. The two cells I tested barely met the 3250mAh minimum capacity rating for these cells (3350mAh typical capacity rating) so I am rating them at 3250mAh.

Two cells were purchased for testing by me from Liion Wholesale (Liion Wholesale Batteries | Li-ion battery/cell distributor).


Continuous Current Discharge Graphs
46C9C1CC-F9FB-45AE-8B32-CA3E32E8EEDC.jpeg EACA27E6-0E52-4AF3-BCEB-82EEC6DD07CB.jpeg A5459BF1-E924-4C66-A2BA-5AEEF9BC4C01.jpeg


Ratings and Performance Specs Graphic
23F1AAEB-4027-4744-89A6-EDB63BCD256D.jpeg

I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum

  • Locked
SMOK RPM 5 Pod Mod Kit Giveaway, 1 winner, ends on Mar. 24th, 2022




RPM 5 Kit is a portable and durable pod mod kit coming with glossy finish and rounded edges. It is built with large 2000mAh battery to bring you long-last vpaing and you can recharge it via type-c cable. The stepless airflow adjustment mechanism is added to support airway regulation of any size. The RPM 5 Pod of 6.5ml capacity utilizes the new mesh technology of RPM 3 to bring great DL vaping. Besides, the RPM 3 Mesh tech can increase the atomization area and improve the heating rate. Featuring slide-to-open top filling system, you can refill it easily.


SMOK RPM 5 Pod Mod Kit Giveaway, 1 winner, ends on Mar. 24th, 2022

Enter here

  • Locked
Pre-Order! Uwell Kalmia Pod System Kit 400mAh 1.6ml

KALMIA comes in a fully lip-fit design. The drip tip will match the user's lips perfectly. Users can savor the authentic flavor with this design and patented Pro-Focs technology. A combination of smooth surface, palm-size, and round-corner design will bring users a very pleasant grip. You will get a gentle touch and relaxing feeling when you take the KALMIA in hand. KALMIA 6 colors provide users with different choices. Different color devices can be beautiful matches to your daily life. The ingenious gradients and flower-shaped LED indicator will attract your attention at a glance.



Material: PATM0251, AL, PC+ABS, POK
Size: L:20 mm * W:10.8mm * H:109mm
E-liquid Capacity: 1.6ml
Max Power: 13W
Battery Capacity: 400mAh
...

Click here for more:

Uwell Kalmia Pod Kit: Uwell Kalmia Pod System Kit

Filter