Get 15% off across the Store, Code: Reddit15
Note: Code does not work on sale items

ECigMafia presents Blue Razz Nic Salt by (Air Factory). Indulge in a delicious stretchy blue raspberry flavored taffy that will tingle your sweet tooth with joy. This flavor is one of Air Factory’s classics, delivering a sweet blue raspberry candy sensation with every puff you take.

Liquid Details:

• Brand: Syn E-Liquids
• Flavor: Salt Synthetic - Blue Razz
• Nicotine Type: Nicotine Salts
• Bottle Size: 30ml
• Nicotine Levels: 24mg / 48mg
• VG/PG: 50/50

Package Contents:

One Syn Liquids Salts Blue Razz 30ml E-Juice

Has anyone got any suggestions for medium to higher end RDL single coil RDAs *that are available* without having to jump through hoops like raffles or short lists every 3 months?

My favorites are the Venna and the Citadel, and I just ordered an Armor Engine, thinking of picking up a Reload S and/or a Daywon.

Any thoughts on the last two or other suggestions I should look at? I think I have most of the commonly recommended 'budget' ones.

H

I recently got one of these.
It's excellent. Both the mod and the included tank. Great clouds and great flavour. I recommend it to anyone who wants a great vape rig .

Hey everyone. I just got a smok R-Kiss.
It's fantastic. And the included tank is also very good. Looks good and performs so well.. you can't go wrong with this mod

So in a clutzy moment I dropped the tank fo my avacado 22, cracking it, now I can't find anywhere selling them (other than fasttech, but I don't have time for extended shipping) does anyone have one they can sell me, either clear or frosted, I'm not picky

Welcome back with another Z-Lee review. Today we have the Kumiho Model V Mini-Pod Kit we're going to be taking a deeper look at. It's really a "Pod Kit", but these smaller devices have kind of pushed out the larger "Pod Kits" into a realm of the unknown. Pod devices like the Innokin Sceptre Tube, VooPoo Doric, and Uwell Havok V1 are still pod kits to me because they use proprietary pods, but apparently other people think differently. Therefore, I'm deeming smaller devices such as this Model V as a Mini-Pod device - they are quite mini. It's the same general size as the Innokin MVP Pod Kit, Surge Pod Kit, Freemax Onnix 2 Pod Kit, and a plethora of other similar mini-pod devices like the Vaporesso Xros, Caliburn A2/G2, etc. The drip tip or mouth piece is quite a bit thinner than most however, and I really like that. I'll show some comparison pictures later in the review.

I want to thank Sue over at HealthCabin for setting me up with the samples needed for this review. Before she'd asked me to do a review on this product, I was rather hesitant. I'd never heard of Kumiho before and I'm not a big fan of the direction vaping is headed with pod systems as a whole, but I'm happy that I said yes. I was rather surprised by the Model V. As always, I'll remain fair and unbiased in this review.

Welp, shall we?

• Model V Battery/Mod
• 0.6 Ohm 2 mL Refillable Pod (14-18 Watts)
• 1.0 Ohm 2 mL Refillable Pod (11-13 Watts)
• User Manual

• Power Output: 11-18 Watts
• Coil Resistance: 0.4-3.0 Ohms
• Battery Capacity: 600 mAh
• Charging Specification: USB Type-C Charging Port (5V/0.75A)
• Low Voltage Warning: 3.2V +/- 0.1V
• PCBA Temperature Alarm: 60° C (140° F)
• Longest Vaping Time: 8 Second Cutoff
• Working Temperature: -10° to 45° C (14° to 113° F)
• Standby Current: =< 15 uA (millionths of an Amp)

There are a couple of safety prompts that are shown using specific light patterns that refer back to a few of these tolerances which I'll go over later.

In case there are issues with photos, the available colors are:

• Gold Pink
• Red
• Blue
• Gunmetal
• Black

I received the Blue colorway for this review. The aesthetic is a polished aluminum alloy and it's much more of a brilliant and vibrant blue than what's seen in the photo above. You'll get a better look further down.



This device is solidly built, yet extremely simple in construction. I'll get into more details about all of this down below.

• Vibration Interaction
• Patented Cotton Design
• Adjustable Airflow
• Refillable Transparent Pods
• Pre-fill Pods (sold separately)
• 2 mL Pods (TPD compliant)
• USB Type-C Charge Port
• Auto-Draw
• 600 mAh Internal Battery

The battery vibrates when the pod is seated correctly followed by the LED indicator lighting up with the status of your battery.


From MTL to loose MTL is about right for the Model V. I'd almost consider it a loose MTL to a more loose MTL, but that really depends on which coil/pod you're using. The 0.6 Ohm coil is a loose MTL to more loose MTL, the 1.0 Ohm coil ranges closer to an MTL and loose MTL.

LED Indicators/Prompts can be a bit confusing, but I think after you've used this device for a bit, you'll get used to what you're seeing. The LED patterns shown below will hopefully clear this up some.

When inserting a pod or taking a puff, the LED indicator will show the status of your battery for around 5 seconds and then fade out.

• Red: 0-30% battery remaining
  
• White: 31-100% battery remaining

When plugged in and charging, the LED will pulse at a very slow rate.

• Pulsing Red: 0-29% charged
• Pulsing White: 30-99% charged
• Solid White: 100% charged

LED Warnings/Prompts:

• Low Battery: Slow pulsing red light when inserting a pod and the battery is below 30%, the red light will flash 10 times when the battery is out of power
• No Atomizer (Pod): Red light will flash 3 times
• Atomizer Short: White light will flash 3 times
• Output Timeout: When a puff timer exceeds 8 seconds, the LED will flash white 7 times
• Overheat: White light will flash 5 times when the device exceeds 60° C or 140° F

I'm not entirely sure what's exactly patented with the 0.6 Ohm coil other than what's indicated above, but I will say that it vapes better than the 1.0 Ohm coil. The 1.0 Ohm coil does offer a slightly stiffer and closer to a true MTL draw, but I experienced a bit of gurgling with it. It wasn't all the time, but the gurgling would pop in and out. It never really effected the overall vape, other than it felt like I was sucking through a straw trying to get the last drop of pop/soda/coke out of a cup. I started with the 0.6 Ohm coil because the lower resistance coils generally have a higher chance of leaking with larger juice ports. So far I've experience no leaking from either pod.

This device offers refillable pods if you have your own e-juice, or pre-filled pods for purchase. The flavors are listed below and can be purchased separately. Unfortunately I did not acquire any of the pre-filled pods for this review, so I cannot make any remarks on their flavor or quality.


This is quite an interesting array of flavors:

• Ice Mango
• Ice Watermelon
• Mung Bean
• Assam Milk Tea
• Ice Blueberry Lemonade
• Ice Banana Apple
• Passion Fruit
• Banana Ice Lolly
• Ice Coke
• Fanta

500-700 mAh capacity is about the average for devices of this size. The Kumiho Model V sits right in the middle at 600 mAh. I wouldn't say it's guaranteed to deliver a whole day of vaping if you're a regular vaper, but if you're the type to take a puff here and there every half hour or an hour, then sure - this'll get you through the day. More likely with the 1.0 Ohm coil/pod simply because the battery's using only 11-13 Watts instead of 14-18 Watts with the 0.6 Ohm coil/pod. I'd say that you can expect to vape roughly 2 or so full pods, or 4 mL in total, per battery recharge. This device was clocked at a 0.7A charge and it's advertised at 0.75A - very accurate and I applaud the honesty here. Nothing irks me more than false advertisement. You can expect around an hour to fully charge from a dead battery, but the Model V does have pass-through vaping, so you're able to safely vape while it's charging.

More on this below!
So, I've had the Kumiho Model V for almost two weeks now. I have an hour and a half commute to and from work currently, and this device has been my daily driver. The 2 mL tank will get me to work, and a 2 mL tank will get me home.


The drip tip is very slim and comfortable between the lips. The pod is made of PCTG which will make it resistant to breaks when dropped. I've dropped this pod quite a few times, and unless I've been really lucky with how it's landed, you can't even tell it's been dropped - the device is very light. For the Model V, the coil is built into each pod meaning when your coil burns out, you must purchase a new pod. Replacement packages of coils/pods come in 3's.

I've been very surprised with the flavor output in these pods. I'm not one to be all gung-ho about disposable pods simply because I think there are better options for the environment, but I'd be lying if I said these pods don't deliver in flavor.

I've been using Vice Cream (Vanilla Ice Cream & Buttery Sugar Cookie) from Freeman's line of e-juice which I've had a difficult time getting much of any flavor from in rebuildable decks and MTL premade coil head ("sub ohm") tanks, but Kumiho's Model V is popping out some extremely tasty vape. I've just been enjoying the crap out of this juice, and so I haven't really tried other fruit or custardy flavors. I also only received two pods, and I wanted to give a fair comparison in flavor between the 0.6 and 1.0 Ohm coils. The 0.6 Ohm coil definitely puts out better flavor, but the 1.0 Ohm coil isn't far behind. As mentioned above, the 1.0 Ohm coil will also give you a tad more battery life if you're in dire need to stretch it out.
I mentioned in the color options portion of this review, that the pictures don't really do the actual colors any justice. As you can see, the blue is far more vibrant.

On the front side of the battery mod toward the top, you can see the fox head logo which shows the LED indicator through the cutout of the eyes. Toward the bottom is the Kumiho logo.

Transitioning to the left side of the battery, is the airflow control that slides up and down. The picture below will give you a better look at that.

On the back side, is simply Model V along the bottom.

Flipping the mod upside down gives us a view of the USB Type-C charging port. This device will charge from a 3.0 QC charging cable, but it will still only charge at 0.7A. Again, you're looking at a 45 min. to an hour charge time from fully dead, but you can safely vape while it's charging.

Every time I've recharged this device, the pod has remained in the battery while on its side. Zero indications of any leaking.

On the top of the battery where the pod seats, you can see an oval-shaped opening - that's the airflow hole that feeds up from the airflow control on the side of the battery. The two spring-loaded brass positive and negative connector pins are interchangeable meaning you can put this pod in either way, and it will function the same. The small circular hole near the top is your auto-draw detector which I must say, is very sensitive. Even if the MTL draw is too loose for what you're used to, you can still draw slower than the suction, and the auto-draw will still fire the battery. If you have problems with the auto-draw activating in the future, remove the pod, hold the battery near the bottom, and whip it (whip it real good) like you're trying to get the last drops to come out of a hose. Do this for as long as you need. This will hopefully release any residue caught down in the auto-draw sensor.
(Finally, the airflow!)

So, I wasn't all that impressed with the airflow control. Can I tell a difference when I'm inhaling and plugging the airflow and when I'm not? Yes, but ever so slightly. Maybe this was intended, but I would have liked to have seen a bit more of a wider airflow range. I noticed more of an airflow restriction from switching between the 0.6 Ohm pod to the 1.0 Ohm pod. The restriction might be bottlenecked at the air intake at the base of the pod which may mean this was intended.

When the knob is up, it's fully closed. When the knob is down, you can see 3 air inlets reveal themselves.
The pods are quite simple to use. Don't be a doofus like me, and pull the wrong side of the plug out. Pull from the end that the arrow on the plug is pointing to (also indicated by the magenta arrows). It took me a good 5 or 10 minutes with Swiss tweezers to jam the little rubber piece that holds the rubber plug back into its ultra tiny hole, lol.

Also noted here by the dark blue arrows, is the minimum juice line indicated on the pod with "MIN". This is the point where you're dropping down below the juice ports on the coil inside the pod, which can disrupt the air displacement process of your coil. If you continue to vape while the e-juice is below this line, you are apt to receive some dry hits when you fill your pod back up. This may fix itself, and it may not. It's best just to keep the juice level in this pod above the MIN line.
Refilling is very easy with this pod. Once you open the rubber plug (correctly ), the refill hole is large enough to fit a 120 mL Gorilla nozzle way down inside of it without the worry of juice bubbles swelling up out of the hole.

I will say of all the mini-pods I've tested, this is one of the easiest simply because of how far into the refill hole you're able to get the nozzle. Once it's filled up, seal the rubber plug, and look for those tiny cute little bubbles floating to the top. This indicates that the juice the wick is absorbing, is pushing the air out of the wick, and into the tank which is how it's supposed to be. Allow the wick to absorb the juice for about 5 minutes to be on the safe side before vaping.

If you don't see bubbles when first filling, or after taking a few puffs, that's a bad sign. Expect some dry hits in the near future.
==Pros==

• No leaking (not a hint so far)
• Super lightweight
• Built sturdy for a pod device
• Very simple to use
• Slender/pocket-friendly and sleek look
• Fairly simple LED indicators
• Love the thin mouth piece
• Flavor in refillable pods is outstanding
• USB Type-C compatible
• Vibration lets you know the pod is seated correctly
• Decently long coil life (so far - no decline in flavor)
• Pod seats very snug
• Refillable and Pre-filled Pod options
• Adjustable airflow
• Vibrant colors

==Cons==

• Battery status indicator is a bit lacking; I'd be severely disappointed if I thought my device was near-fully charged, when in fact it was actually sitting at 30% - both statuses would be indicated by the same white light
• Adjustable airflow is hardly noticeable

==Preference Considerations==

• 600 mAh battery
• No USB Type-C charging cable

I'm a huge sucker for flavor, and this mini-pod really delivers.

The Kumiho Model V Kit can be found at HealthCabin currently at a price of $24.99 when you create an account and/or login which gives you 30% off. It's also part of the Weekly Sale page right now which means you can use the code "WSHC" at checkout for another 17% off which will further drop the price to $20.74. Refillable pods in packs of 3 for both 0.6 and 1.0 Ohm coils are currently $9.99, and pre-filled pods in packs of 2 with various flavors come in 30 mg/mL (3%) salt nic for $7.99.

If you have any questions regarding this product, feel free to leave a comment or contact me directly.

Thanks for checking out my review, and happy vape hoarding!

Hello forum,

Im in search of portable small size thin tip plastic bottles for my juice to carry around. Preferably as small as 10ml or less. I have looked up Amazon but dont know which is good without leaking and i only need a few and they sell in bulk most of the times.

Any suggestions where i can find some good ones where i dont have to get like 30 of them?

Thank you!!

eVic-VTC Mini - Joyetech

Does anyone know where it's possible to still purchase these mods?
I won mine here on ECF 7 years ago and is still my favorite mod. It's still going but cannot last forever and I would like another.

I initially didn't intend to quit entirely, just slow down smoking. It's been about two weeks, and it's like every day I've wanted cigarettes less and less. I only had 1 today, and I didn't even really enjoy it too much. I've been using 3mg juice, cause I like to just smoke it a lot and I didn't want to go over on nicotine. Now it's like I'm not even craving cigarettes. I can't believe it really worked. I was really skeptical. It just happened tho. I hope this trend continues. Have to say, I like fruity sweet flavors way better than my rolled tobacco. Proof, it ain't "for kids" bull..... That's like saying adults don't eat candy. The people trying to get vape juice pulled can shove it!!!!

I wanna add too, and I'll try to keep track of this with time, when I pick up my vape, it doesn't feel the same as when I'd wanna go smoke a cigarette. Sometimes I can only take like 4 puffs and I gotta put it back down cause I'm working. It's more often, but I believe I'm I taking a lot less nicotine. Cause when I first started, I still had to smoke cigarettes. As my cravings for nicotine got less cause the smoking slowed down... It seems to have gradually went away.

Biggest one was also after meals... That seems to be gone now. And with my vape, it's not nagging at me to go pick it up after I eat. I feel like I can just vape at my leisure.

I just can't do sub ohm so listing to see if there is any interest in this lot. These are all new and sealed except one box of the Sense Cyclone coils which I opened to check (none were used, just not in a sealed wrapper like the others).

---4 Innokin Axiom mini, sub ohm tanks
---6 Sense Cyclone tanks
---8 boxes of Sense Cyclone Coils, 0.6 ohm, 50 to 100w. There are 8 boxes with 5 packs, 5 coils per pack for a total of 200 coils
---1 Smok TFv4 mini tank

$110 includes shipping and tracking. CONUS only, Paypal with no mention of vape or ecigs and F&F. If you don't want to do F&F, add $5.

For sale are two Fat Rabbit RTAs. This is the dual coil version. One is stainless steel, the other is matte full black.

Used but in good condition. Each includes the original product box, spare glass, pouch of spares (o-rings, grub screws) and pouch with the coil cutting guide and screwdriver.

$25 each shipped via First Class Mail with tracking (insurance available at additional cost)
$45 for both shipped Priority Mail with tracking and insurance

Payment by PayPal F&F with no mention of e-cigs, vaping, ECF, etc.

So over the last three weeks I decided to build all my favorite RTAs with the same coil and the use the same juice.
The coil is a clapton .70
The juice is orchard blends (by five pawns) pinapple kiwi

The tanks in order of my preference ...
1. Taifun GT 111 - This has only one drawback - it is very large. It is also a loose MTL which I prefer) but you can set it tighter with a very easy to adjust AFC. It also has juice control which is easy to set. It is 22mm and holds 5ml of e-juice so it really tall. Looks best on a SBS but I have it on my Neo for laughs. Flavor is just on point. No leaks. No dry hits if you don't stuff with cotton. Less is more.

2. Kayfun Lite 2022 - They improved the tank with this iteration. It is now much much easier to refill as the bottom comes off without a struggle. The air flow is adjusted through the 510 pin which means you cannot easily adjust it when on the go (you need a screwdriver and you need to remove the tank from the mod. Also it only holds 2ml and is bottom fill. But the flavor - as good as the GT 111. Alaso no leaks. No dry hits.

3. Kayfun Prime - I have the DLC version. So pretty. Although it is slightly taller than the Lite it still holds only 2ml. But like the above two attys it is 22mm which I really like. And its top fill. And it is pretty easy adjusting the AFC. I am not as fond as the juice control system as you need to spin the tank but it works and it does not leak. Flavor is quite good - it's a Kayfun after all.

4. Steampipes Cabeo - This is a strange one. Its an RDTA like no other. There is no cotton going down into the tank. No mesh wires. It works by capillary action but amazingly it works. This tank is 23.5mm and holds over 5ml of juice. Fairly easy to fill too and I got no leaks and surprisingly no dry hits. It is again a large tank. And the flavor is not quite as good as the preceding attys. But still I'm fond of this tank.

5. Squape A(rise) - Not the first Squape I've owned but by far the best for juice control and filling. Again no leaks and it is top fill. A big tank - 24mm with a 4ml capacity. It has excellent flavor and both juice control and AFC are combined on the same ring. The airier it is the more open the juice control. But it works.

6. Taifun One - This is a pain in the .... to fill. Does not leak and I never use juice control. There is minor adjustments you can do to the AFC. This is the worst type of bottom fill. You really need needle point bottle to fill but flavor is very good.

The there are the few tanks I never use much. I do like the Dvarw 22 mm. It leaks it is bottom fill (unless you buy accross vape top fill accesory (which I have) and it is set air flow. Not a fan. I used to use my Bishop and Pioneer too but the other tanks I own above are simply better although both Bishop and Pioneer for the price are certainly worth the cost. I'm just spoiled.

Now happy to hear what you guys have for prefered MTL vape.

The YiHi and SXMINI G-Class V2 is the long awaited overhaul of the very popular G Class that was released half a decade ago. With an all new board, chip and screen, a new way of doing temp control and a new way of running an "app", will the G2 hold up the trophy the original held?

YiHi and SXMINI G-Class V2 - CHAPTERS

00:00 - Intro and specs
04:00 - Close up
35:00 - Temp Control & Wattage Vape
38:00 - Thoughts


Login to view embedded media

As the title says I'm looking to try a squonk now.

I will never figure out how insurance companies work, same exact coverage for the same vehicle. Why the heck are the prices so different? I think I should call around every year and shop for the best price. It is just insane. The word scam comes to mind.

Originally I was just trying to find trades of various different mods and kits for a dual 2X700 but now I'm going to also put some prices up for each of the mods and kits in case if anyone wants to purchase one of them. If anyone wishes to have further detailed photos or more description of any of the items I'm happy to give that to you. There is an assortment of regulated unregulated and even a mechanical mod there are a couple squonkers And even a mod that allows you to go in the series and parallel batteries. Speaking of batteries I have mostly external battery but a couple internal battery.

Plus $6 for standard first class shipping with tracking per order not item. So if you buy one item shipping $6 if you buy four items same.
USA only (sorry) PayPal
My first available day for shipping is Thursday the 7th April unless I can figure out how to do at home shipping.

If a couple things catch your eye let me know we can probably work something out.


Squonkers:
Drip Box 160 squonk kit (used condition some scratches) $25
Pico Squeeze 2 kit (used) $30
Coil Art Azeroth (unreg/mech) unused $20

Mods/ Kits:
OBS Cube X mod (few small scratches) $20
Nunchaku 1 RDA kit (used a couple times) $30

Unregulated Mod w Series Para batts:
Wismec Luxotic NC (noisy cricket) It does have a MOSFET but I still wouldn't say this is a beginner or moderate mod. $30

Tiny mods and pods:
Vinci Pod Kit 15w unused but unsealed $15
COV Mini volt (good condition) $18
IJoy Diamond VPC kit 45w (used 3 times) This mod has a 510 It's tiny It's adapter allows the use for juul pods and a couple others It's neat and cute. Also has three extra pods to go along with it $25

Hello and thank you for joining me today for this review on a fairly new product made by a company named VINS. They offer two products that are both pod mods called the 24K and 18K. Both units have a 5-30 watt output range with a 1000mah battery capacity. The 24K is gold colored and the 18K is silver colored. The body of each mod is made of zinc alloy and with the square shape of the mod it really reminds me of a small mod that I used years ago but can’t quite remember the name. I think it was a VV3 or something like that. I thought with the shiny exteriors that they would be fingerprint magnets but they aren’t. So without further rambling, let me show you some pictures and I’ll give my opinions on these devices.




WHAT’S IN THE BOX?

1 x VINS 24K Device

1 x Refillable pod (Mesh Coil 0.8Ω)

1 x Refillable pod (Mesh Coil 1.0Ω)

1 x Antibacterial Drip Tip

1 x User Manual



SPECIFICATIONS:

Size: 19*19*123.5mm

Capacity: 2ml

Resistance: 0.8/1.0Ω

Battery: 1000mAh

Color: Gold or Silver



FEATURES:

1. Built-in 0.8/1.0ohm Coil for DTL/MTL vaping

2. 1000mAh built-in battery, output power 5-30W

3. Bacteriostatic material 510 Drip Tip, 99.9% healthy protection

4. Zinc Alloy material, elegant and worthy












INITIAL THOUGHTS:

Vins was nice enough to send not only one each of the 24K and 18K pod kits but also included a spare two package of each of the .8 and 1.0 ohm pods, while one of each is included in the kit, and two bottles of e liquid. The flavors that were sent were Mint and Godfather. The Mint was just too strong on the menthol for me. I did make it through about half of a pod before I gave up and filled another pod with my own DIY liquid. The Godfather is a really nice tobacco flavor with a somewhat strong throat hit which is no surprise at 40mg strength. The Mint is 30mg but way too much menthol for me. I have noticed in several menthol flavors that I’ve tried in this one and in prefilled pods that I seem to pick up on a grapefruit or guava taste ever so lightly. I did think it was odd that there was not a charging cable included in the kits I received.



The packaging of the Vins kits is nice. On the front is Godfather’s Choice along with 24K and the VINS name in gold lettering or 18K with the same in silver lettering depending on the kit. On the back of the box is the statement “The Godfather of the E-cigarette industry”. Also on the back is a list of the contents, specifications, and company information for the Vins company.



Both mods came with the battery unit, one of each resistance pod, an anti-bacterial drip tip, and a nice detailed user manual that contained various languages. The mod itself has minimal branding which I like. Near the bottom it has the VINS name along with either 24K or 18K depending on which you have. Near the center of the face is a single fire/adjustment button. This button can be used to fire the mod or the mod can be auto fired thanks to the very well working airflow sensor. This button is also used to adjust the wattage. Above the wattage button is the display screen that shows the following information.

- Set wattage

- Lock indicator

- Battery indicator

- Coil resistance

- Puff counter



The back of the mod has a single airflow opening near the top of the unit with a USB-C charging port in the center. I like that the port was placed here rather than the bottom of the mod like many pod devices have. The zinc alloy frame gives it good weight and the square shape with a flat bottom makes it stable to stand up on a flat surface. I do wish though that they could have designed an adjustable airflow control into the body or pod. This is something that I like to see in pod devices.

The Vins have a 100mah battery which is totally acceptable for a device of this size and seems to last a very good amount of time with the 1.0 ohm pod and just a little less with the .8 ohm pod. The coils themselves are not replaceable so the entire pod needs to be changed when necessary.

The pod opening on the mod has of course two gold plated electrical contacts as well as four strong magnets. Once the pod is partially inserted then the magnets are strong enough to pull it in the rest of the way and the pod stays in place very securely. Also in the center of the opening, the raised airflow sensor for the auto draw function can be seen.








The operation of the Vins devices seemed a little over complicated to me for a simple pod device but I understand that this is because they have chosen to include a display and some functions that not all pod devices have included. The functions are as follows.

- Press the button 5X to turn the device on/off

- To reset the puff counter, remove the pod and hold the button for 5 seconds

- To lock the wattage, press the button 3X in 1.5 seconds to lock the fire button and the lock symbol will show on the display. While this is locked you cannot use the fire button to operate the output and can only use auto draw

- The manual says to press the button to adjust the wattage but I have to press the fire button three times first and then can press the button to adjust the wattage



The mods also have some safety protections which include

- High temperature protection

- No atomizer

- Output short circuit protection

- Vaping timeout(4 second cutout)

- Low power protection



Although both devices are rated for a maximum of 30 watts, they use what I call a smart output mode where you are restricted to a wattage range depending on the resistance of the pod used. The 1.0 ohm pod restricts you to a range of 10-13 watts while the .8 ohm pod allows a range of 15-18 watts.


THE PODS

Each kit includes one of each resistance pod along with a bacteriostatic drip tip. I guess that means it’s antibacterial but honestly just looks like a stainless steel drip tip to me. It is comfortable to use though. It was a pleasant surprise when I opened the spare pods that Vins was nice enough to send with the samples and there was another drip tip already on the spare pod.

The pods are clearly marked with the resistance rating on one side. I like very much that the pods are clear PCTG and the liquid level can be easily seen not only due to the clear pod but also the design of the pod opening on the mod that allows the user to see the liquid level.

The pods are a side fill with a rubber fill port plug. The plug is rounded on one end and flat on the other end. To open the plug just pull up on the flat end and fill. I was able to fill with the bottles that I commonly use with no mess whatsoever.

The bottom of the pods have two fairly large electrical contacts along with the matching magnets that the mod has with one in each of the four corners. When you insert the pod into the mod it will only go in one way in order to align with the contacts.







FINAL THOUGHTS:

In my opinion both the 24K and 18K have an attractive appearance and to me give off a bit of an old school vibe. I think I mentioned earlier that I tried both of the bottles of e liquid that were sent with the samples. I put the Godfather tobacco liquid in the 24K with the 1.0 ohm pod. That pod gives a really nice semi restrictive MTL vape. I found the flavor production with that liquid really very good. However, at 30mg strength which I haven’t used in a long time it did cause me to cough occasionally. Being restricted to the 10-13 watt range for this pod seemed right to me. I did run it at 13 watts though. When you put a pod in for the first time it defaults to the lowest setting in the range. Since I couldn’t handle the strong menthol from the Mint e liquid that was sent, I instead filled one of the spare .8 ohm pods with an RY4 Cream recipe that I have used quite often. With this pod I kept feeling that I wanted a little more output but was restricted to the maximum of the range at 18 watts. I feel like this one could be pushed to 21 watts or so for a little more flavorful vape. At first I thought the flavor production was a little weak but after running a tank or a little more through it, the flavor improved. Overall, I’d probably give the flavor production a 7 out of 10. I felt like the .8 ohm pod was more of a restrictive direct lung vape than an actual direct lung experience. I didn’t mind though because I like RDL.

I do like that the Vins mods can be used with the fire button or in auto draw mode. The auto draw function worked very well during my testing. I liked the auto draw with the 1.0 ohm pod but preferred to button fire the .8 ohm pod due to that pod having noticeably more airflow. I do wish though that they had been able to incorporate an adjustable airflow into these pods. I think it would have made a noticeable improvement. I understand why they restrict the output levels since it would be good for beginners and have less chance of burning up the mesh coils in the pods but for an experienced user I think it would be nice to be able to bypass those limits and set the output where you want it to get a little warmer vape especially with the .8 ohm pod.

So, here we are at the end of yet another review. I’d like to thank Vins and Elena for sending the VINS 24K and 18K pod mods for this review. As always, thanks go out to the dedicated readers of my reviews. I do truly appreciate it. Below is a link to the Vins website if you’d like to take a look. I haven’t seen these on a lot of websites yet for sale but have seen one or two.


VINS (vinsvape.com)

BP MODS Sure RTA is a 22mm Atomizer designed specifically to offer a pure and satisfying MTL shot given by its small chamber and adjustable airflow.
It is made of stainless steel and polycarbonate, with a diameter of 22mm.
Capacity of 2.4ml/3.8ml/6ml with the small cap both with bottom refill.
Air flow adjustment through the 7 of 510 pins included in the package



Tease-Out & BP Mods Presented
Suitable For MTL/RDL/DL Vaping Styles
Made By Premium SS & PCTG
Two Color Versions : Polished SS & DLC Black
510 Drip Tip
22mm Diameter
43.3mm Overall Height With Standard Tank
34.7mm Overall Height With Extra Mini Tank
Standard Tank 3.8ml Volume
Extra Mini Tank 2.4ml Volume (With Silicone Plug)
Gravity Juice Guide Design
Quick Juice Guiding
Juice Tank Lock Design
...

Click here for more:

BP MODS Sure RTA: BP MODS Sure RTA 2.4ml/3.8ml/6ml

Updated 2022 New Coupons on Vapesourcing

Coupon Code: Scar18K
Coupon Price: $43.99
Discount: 22.81% off
Link: SMOK Scar-18 Kit 230W with TFV9 Tank

Coupon Code: NovoX
Coupon Price: $17.29
Discount: 24.79% off
Link: SMOK Novo X Pod System Kit 25W

Coupon Code: AirM
Coupon Price: $25.59
Discount: 22.43% off
Link: Suorin Air Mod 40W Pod Kit

Coupon Code: BARRDA
Coupon Price: $6.99
Discount: 30.03% off
Link: Geekvape BARON RDA 24mm

Coupon Code: Cyborg
Coupon Price: $27.99
Discount: 34.89% off
Link: Lost Vape Cyborg Quest Box Mod 100W

Coupon Code: CyborgK
Coupon Price: $32.99
Discount: 34.01% off
Link: Lost Vape Cyborg Quest Pod Mod Kit With UB Pro Pod Tank 100W

Coupon Code: VINCIQ
Coupon Price: $7.59
Discount: 30.94% off
Link: VOOPOO VINCI Q Pod System Kit

Coupon Code: VVINCI
Coupon Price: $15.59
Discount: 32.19% off
Link: VOOPOO VINCI Pod System Kit Royal Edition

Check out the Uwell Kalmia Pod System, featuring an integrated 400mAh battery, 1.6mL refillable pod, and operates on a draw-activated firing mechanism.

Constructed from durable PC+ABS Materials, the Uwell Kalmia Kit is slim and portable, neatly fitting within the pocket, purse, or bookbag with ease. Adopting a 1.6mL refillable pod, the Kalmia relies on an integrated 1.2ohm coil to deliver outstanding flavor and vapor from your favorite eJuice or nicotine salt.

Operating off a draw-activated firing mechanism, the Kalmia is free of buttons and screen to ensure maximum battery life and to maintain the sleek and uninterrupted exterior.

Go to vape store near me to make an order.

You may also like:

voopoo argus gt 2 kit in stock
smok rpm 5 kit online sale

Uwell Kalmia Pod System Kit

Kalmia Kit comes with 400mAh battery capacity with 13W max power. It is paired with a 1.2ohm magnetic cartridge of 1.6ml capacity. The design of elegance and tightness gives Kalmia charming appearance. It features air-activated auto draw, vibration interaction and type-c fast charging. The drip tip can fit your lip fully. Just get it to amazing vapaing experience!

Details:
1. Air-activated auto draw
2. Packed with magnetic cartridge
3. Fully lip-fit drip tip
4. Flower-shaped LED indicator
5. Vibration interaction
6. Type-c fast charging
7. Elegant and compact design
8. Patented PRO-FOCS technology
9. Solid magnetic connection



Aspire Flexus Blok Kit

Flexus Blok Kit is powered by a 1200mAh built-in battery to bring you satisfying all day vape. Equipped with the Aspire ASP chip, it can boost your vaping experience by offering 3-level power modes. Flexus Blok Kit also has dual activation modes for you to choose: auto draw and button triggered. With the precise airflow control, it can customize your vaping experience from MTL to RDTL. Flexus Blok features 3ml e-juice capacity, easy side filling system and top adjustable airflow. It is fit for Aspire AF (Aspire Flexus) Coil Series (AF Mesh 0.6Ω/1.0Ω Coil are included in the package).

Details:
1. Redefines palm sized vaping, elegant but mighty
2. Built-in 1200mAh battery for all day vape
3. Equipped with Aspire ASP Chip, 3-level wattage settings
4. Dual activation modes: auto draw & button triggered
5. 3ml e-juice capacity, easy side filling, top adjustable airflow
6. Precise top adjustable airflow, from MTL to RDTL
7. Fit for Aspire AF (Aspire Flexus) Coil Series
8. Vaping over-time/overdischarge/overcharge/short circuit/overheat/low voltage protection