Hello all I'm Jack been vaping for quite a few years now after smoking a 20 pack a day, the reason I am here is because iv got the new freeMax m pro tank and I'm having a problem with the life span of the coils, they seem to be only lasting me 3 days max and from what iv read about the tank I should be getting 2-3 weeks out of them, I'm quite a normal vaper ( not to heavy but i do vape often) at work I only vape on my brakes for 5/10mins twice a day, I'm running it on a AEGIS mod at 75w using the M2 0.2 coil which is capable between 60-90w am I doing something wrong/something I should be doing to help the life of these coils?
Thankyou

Geekvape Aegis X Kit consists of Max Box Mod and Zeus Sub Ohm Tank. The Aegis X, made of durable zinc alloy, is proofed against dust, shock, and water, and continues the IP67 protection level of the Aegis series. Geekvape Aegis X is powered by a single 18650/21700 battery and has a built-in advanced chipset, which can provide a maximum output power of 100W. It has Variable Wattage, Temperature Control (nickel, stainless steel, and titanium coils), TCR, Bypass mode, and variable power curve(VPC). Thanks to bypass mode, the vape mod can be rigged to harness the raw power of the cells. VPC allows the vapers to control the wattage for each second of operation. Raise or lower it to get hard throat hits or mellow and pleasurable experiences. Moreover, the Aegis X is equipped with all the typical safety features of a box mod, such as 10-second cut-off, short circuit, overcharge, overheat, over-current and anti-dry protection. Aegis X is paired with Geekvape Zeus Sub Ohm Tank via threaded 510 connection.

The Geekvape Zeus Sub Ohm Tank features the leak-proof function and can hold up to 5ml within the confines of the larger bubble glass and 3.5ml in the smaller replacement glass. With the top refilling design, you can be comfortable to fill e-liquid without dirty hands. Zeus Tank comes with an innovative quick-change prebuilt coil system that creates the purer flavor and massive vapor with the GV mesh coil. Furthermore, the integration of direct top airflow and top-to-bottom airflow is available to generate big clouds and enhance nice airflow. The quick slide coil design makes coil replacement quite easy.

Kit Features:

• Quick slide coil design
• High-grade KA1 Mesh coil
• 2.4" OLED screen for a vivid display
• Equipped with advanced AS2.0 chipset
• IP67 waterproof/ shockproof/ dustproof
• Direct top airflow and top-to-bottom airflow

Product Specifications:

Aegis X Mod

• Size: 90x 31.3x 56.1mm
• 2.4" OLED color screen
• Power output: 5- 200W
• Working temp: -10- 45℃
• Charging requirement: 5V/ 2A
• PCBA temperature alarm: 80℃
• Standby current: Less than 10uA
• Resistance range: 0.05ohm- 3.0ohm
• Temp range: 100- 315℃/ 200- 600℉
• Powered by dual 18650 batteries (Not included)
• Menu: Auto/ Theme/ Color/ Version/ ABB/ Reset
• Mode: Memory (M1-4)/ Power/ TC (SS, Ni, Ti, TCR)/ VPC/ Bypass

Zeus Sub Ohm Tank

• Size: 26x 42.5mm
• Drip tip type: 810
• Juice capacity: 5.0ml
• Filling method: Top fill
• Mesh Z1 coil: 0.4ohm, 60- 70W
• Mesh Z2 coil: 0.2ohm, 70- 80W (Pre-installed)

Package Content:

• 1 x Aegis X mod
• 1 x Zeus Tank
• 1 x USB Cable
• 1 x User Manual
• 1 x Spare Parts Pack
  

VOOPOO VINCI 2 - Through exquisite technics, intelligent upgrades of performance, on the basis of the original VINCI series, it is fully optimized to meet a variety of vaping needs, bringing ultimate experience. VINCI 2 features the ease of use of the Pod system and retains the traditional MOD's big cloud and adjustable power make it smaller, easier to operate, and safer to use. The body is in the shape of a rectangular cuboid with rounded edges to achieve the best ergonomics and is coated with a smooth zinc alloy surface coating, which looks modern and stylish from all angles. VINCI 2 has a built-in 1500mAh battery, long-lasting to reduce frequent charging, and can be quickly charged through the Type-C charging port. Provide button/draw-activated modes. Whether it's Manual or Auto mode, VINCI 2 can bring surging smoke the first time. VINCI 2 powered by the upgrade Gene.AI 2.0 chip, not only has the classic Variable Wattage (max. 50w) but also provides a SMART mode and RBA mode. The smart SMART mode can identify the resistance of the coil, automatically adjust the power output accordingly, and at the same time limit the power upwards to avoid overload and the coil becomes scorched. In RBA mode, vapers can fully control VINCI 2, and all settings can be made individually, allows you to break the power limit.

In the VINCI 2 Kit, a VINCI 2 Pod made of transparent PCTG is used. The pod can replace the coil, contains 6.5 ml of e-liquid, and is compatible with all coils in the PnP series. The design of the pod makes it almost 100% leak-proof, and the transparency allows you to observe the liquid level well. The integrated mouthpiece with an ergonomic duckbill design fits comfortably on the mouth and provides an excellent vaping experience. The newly upgraded coil can provide a strong taste experience and produce very good vapor. VINCI 2 is compatible with 0.3ohm PnP-VM1 and 0.8ohm PnP-TM2 coils and provides the best purification effect for e-liquid salt and nicotine salt respectively. The slider on the side of the mod can be used to continuously and comfortably adjust the airflow and the resulting resistance from a stricter MTL to a more open RDL. Slide the slider left and right to adjust your favorite flavors. Therefore, every vaper can use VINCI 2 to quickly and easily find the correct settings for their vaping behavior.

MOD Parameters

• Material: Zinc Alloy
• Output Power: 5-50W
• Output Voltage: 3.2-4.2V
• Resistance: 0.15-3.0Ω
• Battery Capacity: Built-in 1500mAh battery

Pod Parameters:

• Capacity: 6.5ml
• Material : PCTG
• Resistance : 0.3Ω (PnP-VM1), 0.8Ω (PnP-TM2)

Package Content:

• 1x Vinci 2 Device
• 1x Vinci 2 Cartridge (6.5ml)
• 1x PnP-VM1, 0.3Ω
• 1x PnP-TM2, 0.8Ω
• 1x USB Cable
• 1x User Manual
  

SMOK RPM 4 Kit perfectly complements the RPM series, is more compact and more convenient, and is especially suitable as a device for beginners who want to use DL vaping on the go. The ergonomic cigarette holder of the pod ensures a pleasant and comfortable taste during vaping, while the simple user interface ensures intuitive operation. Despite its small size, the 1650mAh built-in battery can ensure long-term vaping fun. The battery can provide ample power and strong performance for each puff. Once the power supply disappears, the small pod system can be fully charged again in a short time through the Type-C connection, allowing you to focus on vaping and prepare for new possibilities. The RPM 4 vape kit can achieve an output power of 5 to 60W, which can utilize the full potential of RPM and LP2 coils. Whether you like thick vapor or pure taste, a wide range of power adjustments can make you enjoy endless aftertastes, resulting in a pleasant taste. The chipset itself can recognize many parameters, and the user will receive detailed information about the coil used and the output. Featuring a 0.96 inch TFT display - rich vape data and customizable theme colors are perfectly matched to provide a more intuitive vaping experience.

SMOK RPM 4 Cartridge is compatible with different coil series. SMOK RPM 4 LP2 Pod is compatible with two LP2 coils; SMOK RPM 4 RPM Pod is compatible with all RPM coils. Both have a capacity of 5ml and can provide a continuous atomization experience. They have a consistent flavor and pleasant enjoyment. More details to winning your favor. A duck-billed mouthpiece is used on the top of the pod, lock the great taste in your mouth. Transparent oil window design shows the consumption and remaining volume of the e-liquid, easy to check. There are four small magnets at the bottom of the pod, firmly connected to the mod. Facilitate the assembly and disassembly of the pod. The package comes with a new LP2 coil installed in the pod. This is SMOK's new coil series. The leakproof protection function has been modified so that these coil heads will not waste a drop of liquid. Both LP2 Pod and RPM Pod support infinitely variable airflow. There is an airflow slider on the back of the mod. RPM 4 can change the taste between DL and RDL when dragging the slider to the left or right.

Specifications:

• Size: 103m*25*27.9mm
• Weight: 102g/107g*
• Battery Capacity: 1650mAh
• Power Range: 5W-60W
• Standby Current: <100uA
• Input Voltage: 3.3V-4.2V
• Output Voltage: 0.8V-4.OV
• Resistance Range: 0.2Ω-2.5Ω
• Charging Voltage: 5V±O.2V
• Charging Current: Max 1.5A
• Overcharge Voltage: 4.3V±O.05V
• Overcharge Current: 2A±O.6A
• Over-discharge Voltage: 2.4V±O.05V

Package Content:

• 1x RPM 4 Device (1650mAh)
• 1x RPM 4 LP2 Pod (LP2 Meshed 0.23Ω DL Coil Preinstalled) (5ml)
• 1x RPM 4 RPM Pod (RPM Mesh 0.4Ω Coil Preinstalled) (5ml)
• 1x Type-C Cable
• 1x User Manual
  

VOOPOO VINCI Pod System Kit is the latest to use stylish CMF design on outfits, compact and lightweight, easy to carry. Features built-in 800mAh battery and smart GENE Chip planted, the output power up to 15W. The VINCI Pod combined with the new tech. in vaporization, pre-install 0.8ohm coils and equipped with a leak-proof design that makes VINCI Pod Kit more perfect. Moreover, the VINCI pod cartridge has an air-inlet ring that the airflow can be adjusted to bring a more amazing taste!

VooPoo Vinci Pod Kit - The Voopoo Vinci Pod Kit includes the all-in-one Vinci pod system powered by an internal 800mAh battery offering up to 15W of power output. The pod is accompanied by the Vinci pod cartridge with an e-juice capacity of 2ml and a 0.8ohm resistance. The Pod device is made from durable zinc alloy and the cartridge is constructed from toughened PCTG, making the whole device rugged and safe from minor drops and bumps.

Pod Parameters:

• Capacity: 2ML
• Material: PCTG
• Resistance: 0.8Ω

Mod Parameters:

• Name: VINCI Pod
• Material: Zinc Alloy
• Output Power: 15W
• Input Voltage: 3.2-4.2V
• Resistance: 0.6-3.0Ω
• Battery Capacity: Built-in 800mAh

Package Content:

• 1x VINCI POD Device
• 1x VINCI POD Cartridge, 0.8Ω
• 1x Type-C Cable
• 1x User Manual

I have a smok luxe 2 that I only recently got. All at once the display has gone black.
It still hits okay but it's a pain to not be able to adjust it or see how much charge I have left.
My local shop guy looked at it and said probably it's the board
I hate to have to buy a new mod so soon
I've had the same thing happen to a few other mods.
Anybody else have this happen? Is there any way to fix it?
Thanks
Ronnie

Hi. I've been vaping for over ten years and love it

Innokin Sensis is a Pod Mod Vape Kit with a unique design and innovative features. It adopts the latest new vape technology to provide better flavor and longer coil life. Made of zinc alloy, using the perfect combination of glass, leather, and metal, an all-in-one device ideal for those of you looking to step up from a pen-style vape, which can support both MTL (mouth to lung) and RDL (restricted direct lung) vaping. A large built-in battery with a capacity of 3000 mAh is responsible for the power supply, allowing the vape to last all day without charging. Sensis has a variable output power range of 6-40W, with three new modes: Coil+, Refresh, and additional "Find F" mode. Coil+ mode is a new feature you can activate, primes the coil at the end of each puff by drawing in more liquid and reducing carbon on the coil, allowing for more flavor guaranteed to satisfy vapers' taste buds. Refresh allows to manually refresh the coil between puffs by providing better wicking and bringing in flavor to extend the coil's life. "Find F" is the unlockable new bonus mode, the new generation vape technology that extends coil longevity and offers more flavor over time, and is only accessible with the elusive 'Find F' code. Enter the following code when you select the locked mode for the first time: -+-++-power. Innokin reports that this mode can be used to select a frequency that boosts flavor between inhales.

Innokin Sensis Pod is a new Pod made of glass, which can significantly improve the flavor of e-liquid. It can hold up to 3.1mL of your favorite e-liquid. Compared with the traditional plastic pod, this pod is more transparent (you can check the e-liquid level more easily). Because of the underfill seal, the filling is very simple, and the sealing system prevents leakage. Sensis provides a new and upgraded Scepter S coil (0.25ohm), which can provide more power, which can make RDL play the best performance. The package also includes a spare 0.65ohm Sceptre Coil for MTL vaping. Sensis Pod is also compatible with all Sceptre coil series. With the help of the magnetic connection, the pod can be firmly fixed to the device. A detachable 510 adapter is provided for use with conventional tanks and RDA. In addition, there is an adjustment slider on the device, which can adjust the airflow under the glass pod according to your personal preference. Sensis Kit also uses environmentally friendly 100% recyclable packaging to reduce waste. This is the first of its kind in the electronic cigarette industry.

Innokin Sensis Pod Kit Specification:

• Product name: Sensis
• Device dimensions Without pod: 93.5x39.51x30.0mm
• With pod: 120.35*39.51*30.0mm
• Tank capacity: 3.1ml
• Coil: Sceptre S-Coil 0.25Ω, 25-35W (New)
• Coil Material: KAL + Seaweed fibre cotton
• Changeable glass: No
• Airflow: Adjustable
• How to fill: Bottom filling
• Coil compatibility: Sceptre Coils
• Battery: Internal 3.7V，3000mAh/11.1Wh
• Wattage range: 6-40W
• Voltage range: 1-7.5V
• TC range: n/a
• Cut off time: 3-18s
• Tank Used with Sensis tank, or with Sensis 510 adapter that can use with other tanks.
• Max.output current: 20A
• Resistance range: 0.2Ω-3.5Ω
• Body material: Zinc alloy
• Connection Magnet
• Charging current: 5V 1.7A
• Charging indicator: Charge bar
• Battery capacity indicator:＜20% - Red; 20%-50% - Yellow; ＞50% - Green

Package Contents:

• 1x Innokin Sensis Pod Kit (0.25ohm)
• 1x Spare Sceptre Coil (0.65ohm)
• 1x Spare MTL Drip Tip
  
  
• 1x Spare O Rings
  
  
• 1x Coil Base
  
  
• 1x 510 Adapter
  
  
• 1x Type-C Charging Cable
  
  
• 1x Quick Guide
  

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This is an average performing cell that should be available at a lower price.
At 5A this cell performs almost as well as the EVE 33V, Molicel M35A, and Panasonic NCR18650GA. At 10A however I think you would notice the longer run time of those other cells. The Sinowatt 34MP could be a good choice though for applications where a more expensive high performance cell isn’t needed.

The two cells I tested delivered 3254mAh and 3289mAh. This isn’t great consistency for a China-manufactured cell but isn’t a problem. The two cells I tested barely met the 3250mAh minimum capacity rating for these cells (3350mAh typical capacity rating) so I am rating them at 3250mAh.

Two cells were purchased for testing by me from Liion Wholesale (Liion Wholesale Batteries | Li-ion battery/cell distributor).


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum

RPM 5 Kit is a portable and durable pod mod kit coming with glossy finish and rounded edges. It is built with large 2000mAh battery to bring you long-last vpaing and you can recharge it via type-c cable. The stepless airflow adjustment mechanism is added to support airway regulation of any size. The RPM 5 Pod of 6.5ml capacity utilizes the new mesh technology of RPM 3 to bring great DL vaping. Besides, the RPM 3 Mesh tech can increase the atomization area and improve the heating rate. Featuring slide-to-open top filling system, you can refill it easily.


SMOK RPM 5 Pod Mod Kit Giveaway, 1 winner, ends on Mar. 24th, 2022

Enter here

KALMIA comes in a fully lip-fit design. The drip tip will match the user's lips perfectly. Users can savor the authentic flavor with this design and patented Pro-Focs technology. A combination of smooth surface, palm-size, and round-corner design will bring users a very pleasant grip. You will get a gentle touch and relaxing feeling when you take the KALMIA in hand. KALMIA 6 colors provide users with different choices. Different color devices can be beautiful matches to your daily life. The ingenious gradients and flower-shaped LED indicator will attract your attention at a glance.



Material: PATM0251, AL, PC+ABS, POK
Size: L:20 mm * W:10.8mm * H:109mm
E-liquid Capacity: 1.6ml
Max Power: 13W
Battery Capacity: 400mAh
...

Click here for more:

Uwell Kalmia Pod Kit: Uwell Kalmia Pod System Kit

Sourcemore 2022 Spring Sale

5 Rounds Flash Sale from $0.01
----Limited 5PCS/Day. 20:00, Mar. 11th - Mar. 15th, GMT+8 Time
----Sakerz Tank, Valyrian 3 Tank, Rhino Pod Kit, Thelema Solo Mod and GEN 200 Mod

10% OFF SITEWIDE Coupon: SP10
(Sale page items excluded)

Bronze Level Exclusive 5% OFF Coupon: SP5
(Must log in, sale page and special discounted items excluded)

Sale Time: Mar. 11th - Mar. 20th

Enter here<<<Sourcemore 2022 Spring Sale

Don't forget to use code SP10

Shop TIMBR Organics CBD Disposable Vape, featuring 500mg of full spectrum hemp extract, 1mL prefilled capacity, and delivers up to 150 puffs.

Features

• 1ml Prefilled Capacity
• 500mg Of Cananbinoid-rich Hemp Oil
• Full Spectrum CBD
• ISO-certified Third-party Lab
• 150 Puffs
• 350mAh Integrated Battery
• 3.5V Constant Output
• Non-refillable And Non-rechargeable

Created with transparency in mind, these full spectrum hemp extract disposable vapes offer a great way to add cannabinoids to the system and are fully tested by a third party lab with a certificate of analysis for each batch. Filled with 1mL of prefilled liquid, the TIMBR Organics CBD Disposable Vape Pens offer 500mg of cannabinoids for relaxing vaping.You could go to online vape shop to buy.

You may also like:

hyde rebel pro
flum float near me

About Vbar Brand
Vbar is a relatively new player in the vaping market. This brand is less than 2 years old, but the technical team has more than 10 years of experience in e-cigarettes to ensure the safety and better vaping experience.

Vbar thrives on offering the best disposable pods with easy-to-use, portable, and good-flavor features.



Comment on Vbar from customers:
* The aromas of the pods are not bad at all, in fact the more you inhale them the more you like them
* the device works very well
* the internal coils give a good aroma
* the device also makes a lot of steam
* among all the disposables that I have used these are the best
* We recommend them to those who start vaping so they will not have any kind of difficulty in using the device and will have greater possibilities to quit smoking, because these are the best disposable pods ever tried so far!

Vbar has released 6 products at present, let’s have a brief introduction of them.

Vbar Ace Lite

* 2ml pre-filled e-juice
* 500mAh built-in battery
* About 600 puffs' vaping


VBAR CUBO LITE

* Unique triangle shape
* 2ml pre-filled e-juice
* 550mAh built-in battery
* About 600 puffs' vaping


VBAR CUBO PRO

* Unique cuboid square tube
* Advanced MESH Atomizing Tech
* 8ml pre-filled e-juice
* 1100mAh built-in battery
* About 3000 puffs' vaping


VBAR CUBO MINI

* Unique cuboid square tube
* Tribal style stickers design
* 4.5ml pre-filled e-juice
* 700mAh built-in battery
* About 1500 puffs' vaping


VBAR CUBO

* Unique cuboid square tube
* 6.5ml pre-filled e-juice
* 1000mAh built-in battery
* About 2200 puffs' vaping


VBAR VBAR Pod

* 2.7ml pre-filled cartridge with 8 flavors
* Anti-condensation design for steady airflow & pure flavor
* 500mAh built-in battery & support recharging

Is there one that catches your eyes or meets your daily vaping needs? The Vbar product line has become increasingly rich, let’s stay tuned for more vbar vapes.

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall now to get your new user coupon and enjoy better price of the latest disposable vapes.

And for any inquires of disposable vape wholesale in China, feel free to contact ElegoMall.

Hi, Freemaxers! Have you already participated in Freemax’s latest activity to win Freemax Maxus Max 168W Limited Edition? Maybe this is the last chance to get Maxus Max 168W Limited Edition for Free. Please seize the chance! It’s time to upgrade your single battery pod mod to Maxus Max 168w. Maxus Max 168w will be your daily vaping device.



How to join in this activity? These are the rules below:
1. You will have a chance to win Maxus Max 168W Limited Edition by clicking the Fire button.

2. Complete the following tasks to unlock the upgraded components to get bigger clouds and stronger power, every 30 points you got will unlock an upgraded component, unlock all 4 components you can upgrade your single battery pod mod to Maxus Max 168w.

3. Successfully upgrade your pod mod to Maxus Max 168w, click the fire button to show your massive clouds!! Fill up and submit the form in the pop-up window after keep clicking, then we will pick up 3 lucky fans from it to win the prizes, we will contact the winners by email and announce them on this page.

4. Activity time: 2022.2.28-2022.3.18

Please click here to enter the activity: Maxus Max 168W Activity | Freemax - Taste the Clouds, Feel the Flavors!

OXVA Origin Mini Kit

Origin Mini Kit is smaller, stylish. It comes with big battery capacity of 2200mAh with 5W-60W power range. It is easy to use with top-fill and magnetic pod of 4ml capacity designs. Equipped with Unicoil, it not only brings the best flavor of its kind, but also features leakage. Origin Mini is powered by new photon chip which will bring multiple protections to ensure your safety while vaping. An OLED screen of 0.69 inch is designed to show you vaping details.

Details:
1. Built-in 2200mAh battery with 60W max
2. Proven unicoils features best flavor and leakproof
3. Magnetic connection
4. Top filling system
5. Stylish & pocket-friendly
6. Photon chip brings safety protections: Short-circuit/Over-time/Output Over-current/Over-temperature/Over-charge/Over-discharge Protection




Hellvape SERI RDA

SERI RDA is a super power RDA that can support up to 200W output. It allows using 3 super low resistance coils to bring you dense vapor and it can match you high power mod perfectly. SERI RDA is a Φ26mm diameter RDA with series coil design. There are dual series coil and triple series coil for your option. with the open and large base, it is easy to build the coils. And to bring you huge cloud and authentic flavor, it also adopts adjustable honeycomb airflow system.

Details:
1. Able to support up to 200W output
2. 26mm diameter with series coils design
3. Dual series coil and triple series coil available
4. Supports almost all coils with super low resistance
5. Open and large base to build the coils easily
6. Adjustable honeycomb airflow
7. 6mm deep juice well
8. 810 drip tip

Hiya folks!!

Just realized like 5 minutes ago that i signed up at ECF on the 8th of march of 2020.
So yeah that is like 2 years and change that i have been here,oh wow...time sure goes by fast.

Just want to thank everyone for being by my side on this vaping adventure of mine,well actually more than that...
You folks have been by my side and given me strength and courage to get thru some very dark moments so for that you all have my eternal gratitude.

Not going to diminish this moment with a funny meme or gif,it is what it is...me thanking all of you for making this site a warm,safe and cozy place i can call home.

@Rob B. @Daniel Forsyth @ShowMeTwice @vaper1960 @Aliraonz @somdcomputerguy @Uncle @DaveP @DeloresRose @Redbird11 @UncleJunkle @hittman @charlie1465 @Opinionated @FranC @Pigs @AngeNZ @CMD-Ky @Mordacai @Letitia @bigbob2322 @Skeebo @borno @pt91 @440BB @Truckin Vaper @the wind @rosesense @Superuser187 @Coyote628 @classwife

Love y'all

P.S: Hope i didn't forget anyone,if i did i am really sorry.

Siren 2 24 km will buy

Where can I buy a siren 2? USA maybe? Can't find any? Love this tank. Thanks for your help

I am trying to get my son-in-law off of his bad 1 1/2 pack per day Marlboro cigarette smoking habit.

I let him use my Kayfun Lite+ V2 atomizer with a single 1.3 ohm coil powered by 10.5 watts. The DIY juice in the tank was 15mg nic ... This combo was certainly a 'tootle-puffer' type of low power mouth to lung style vape.

Well, that didn't work for him at all. He just started coughing badly when mouth to lung inhaling the vape. He tried using this for a couple of days, but just couldn't continue because of the coughing ... How he can chain smoke those Marlboro Reds, but coughs his brains out on vape juice is beyond me !

Anyway, for my question ... Instead of buying those Nic Salt pods that they now sell everywhere, could I just buy maybe some 25mg Nic Salt juice and use that in my Kayfun for him to try? ... again, the Kayfun is using a 1.3 ohm coil and powered by a low 10.5 watts.

I heard that Nic Salt juice don't have a very strong 'throat hit, so maybe he would not cough vaping it.

BTW ... He said he would be willing to give up cigarettes if vaping didn't make him cough so much.

Thanks for any info ...
Ron

Portable, yet robust, the UNIVAPO Miso Pro is designed for optimal portability.

Its 22mm bright fire button and smooth outlook appearance give it an ultra-modern premium look and feel. A powerfully elegant vaping device.

...works as simple as it looks !

Miso C - take it anywhere

Truly Epic and Unique

By adopting the unique CNC cutting design and awesome silicone lanyards, Kipo define the new wave. Seven colors available for fashion options.

The SXK CEO Ceò RBA Bridge clone tank is suitable for Boro Devices / Billet / BB Mod Kit. The CEO RBA Bridge is constructed from 316 stainless steel and polycarbonate tank with a maximum capacity of 4ml and fillable on the front, Ceò RBA clone has a single coil deck with dual posts and multiple air flow settings.
More info Ceò RBA clone for Billet Box by SXK
316 stainless steel
Restrictive direct to lung (5mm x 1mm) incl. air reducer (3 x 0.6mm) for MTL
4ml tank capacity
Liquid feed with 2 x 2.7mm holes
Chimney inner diameter: 5mm
Filling method: sideways
Airflow: front slot
Suitable for Boro Devices / Billet / BB Mod Kit

QUICK Link,Click Here>>Buy SXK CEO Style RBA Bridge Tank for Boro Devices / Billet / BB Mod Kit