Geekvape Obelisk 60 is a modern Pod system with exquisite appearance and stylish design, which provides an excellent DL/RDL vaping experience. The high-quality, sturdy and durable kit offers 4 unique colors. It has an ergonomic shape and while features side panels that contrast sharply with the color. In-mold labeling, decoration technique. Made of tough, scratch-resistant materials, it is environmentally friendly and fully recyclable. The surface of Obelisk 60 is also very resistant to corrosion. In terms of performance, Obelisk 60 is second to none. Powered by an integrated 2200mAh battery, it provides a functional output of 5 to 60W in the classic Volkswagen/power mode. In addition, it also provides bypass mode and TC mode for temperature control in the temperature range of 100 to 315°C. The high-precision chip and integrated circuit board provide the Obelisk 60 with absolute top performance and a wide range of security features on the board. It fits perfectly with the P coil used by Geekvape and provides an absolutely excellent vaping experience. Due to Geekvape's special technology, the output power will not drop due to battery discharge, and the stable output can be maintained even if there is only a small battery capacity left. Fast charging with up to 2 A through the USB Type-C connection.

Obelisk 60 Pod Cartridge is made of dark transparent PCTG and has a capacity of 4.0 ml. The liquid enters the container quickly and cleanly through the convenient side filling and is tightly sealed with a silicone plug. Geekvape's P series coils are used. These coils have a strong sense of aroma and vapor. They have included 0.4ohm coils with a power of 50 to 60 W and 0.5ohm coils with a power of 40 to 50 W. The P-coil provides a first-class intense taste experience and produces dense clouds with a long shelf life. Thanks to the push-pull system, it is very easy and fast to replace the coil. Adopt flagship leading Z Top airflow system - Zero leakage, flavor-precision airflow control. The double "Z Top Airflow" is located directly below the cigarette holder of the pod, through which the drawing behavior can be continuously adjusted from DL to RDL. For this purpose, there are two opposite air inlets, which can be precisely adjusted. The airflow matches perfectly with the P coil. As the real aroma exudes, dense clouds are formed.

Parameters:

• Size: 47.5* 24.0* 97.05mm
• Battery: built-in 2200mah battery
• Output: 5 - 60W
• Input voltage: 3.2 - 4.25V
• Minimum voltage: 3.3V土0.1V
• Screen: 0.96 inch TFT color Display
• Resistance range: 0.10-3.0Ω
• Longest output/vaping time: 10s
• Temperature control: 200 - 600℉/100-315℃
• Charging voltage: USB Type-C 5V/2A
• Capacity: 4ml
• Resistance: P0.4 coil ( 0.4Ω, 50-60W)
• P0.5 coil ( 0.5Ω, 40-50W)

Features:

• -Internal 2200mah battery, 5-60W output
• -Intelligent Power-control chip
• -0.96 inch TFT screen
• -Geekvape P Series Coil, high-power performance delivery in low resistance
• -Top airflow system
• -Type-C quick charging
• -Magnetic click without extra trouble

Package Content:

• 1x Obelisk60 Pod Mod Kit (4ml)
• 2x Geekvape P Series coils (Pre-installed: 0.4Ω, 50-60W, Spare: 0.5Ω, 40-50W)
• 1x Coil Tool
• 1x USB Type-C Cable
  

Geekvape OBELISK 200 Kit is an upgraded version of the Obelisk series. It is powered by dual 18650 lithium batteries with a maximum power output of up to 200W. Obelisk 200 features a portable design that makes it the perfect on-the-go companion. The extraordinary portability is only possible thanks to the CNC machining technique, one-step engraving a single block of aluminum. It makes Obelisk 200 so light and compact that it reveals a combo of precise beauty and structural quality. At 82mm tall and 48.5mm wide, with such a half-palm size, it’s easy to carry around with you in one hand and enjoy big power when it’s time to chill out. Replaceable dual 18650 batteries make battery life not a problem and support massive performance up to 200W output. The two turbo design makes the OBELISK 200 faster and more powerful. Comes with a magnetic design on the battery cap, the cap is easy to remove or click back for battery replacing. Looking at the Obelisk 200 surface decors, it with CMF design that 4 layers overlap one another, creating a light-refracting, color and texture displaying effect on both sides. Its solid and durable features make our smallest 200 mod even tougher under different circumstances.

The Obelisk Tank has 5.5ml of e-liquid capacity, it is designed to take full advantage of the childproof lock design and easy top-filling operation of the tank. The bottom airflow system equipped with Geekvape Z Series Coil enables Obelisk 200 to boost up the flavor and create big clouds so easily, making it as powerful as it is portable.

Parameters:

• Mod size: 82* 48.5 *26mm
• Battery: dual 18650 batteries(not included)
• Output: 5-200W
• Resistance range: 0.05-3.0Ω
• Longest output/vaping time: 10s
• Temperature range: 200-600℉/100-315℃
• Working temperature: -10-60℃
• Charging voltage: USB Type-C, 5V/2A
• Screen: 0.96 inch TFT color display
• Diameter: 25mm
• Resistance: Z0.2 mesh coil (pre-installed 0.2Ω, 70-80W)
• Z0.4 mesh coil(0.4Ω, 50-60W)
• Drip tip: replaceable 810 drip tip

Features:

• The smallest dual battery mod
• CNC Aluminium body
• Double 18650 battery, max 200W
• Childproof tank
• Compatible with Geekvape Z series coil
• Adjustable airflow
• Lift and Slide Top Cap
• Top Filling

Package Content:

• 1x Obelisk 200 Device
• 1x Obelisk Tank(5.5ml)
• 2x Geekvape Z Series Coils(Pre-installed: 0.2Ω 70-80W, Spare: 0.4Ω 50-60W)
• 1x Coil Tool
• 1x USB Cable
• 1x Spare Parts Pack
• 1x Spare Glass Tube(5.5ml)

Geekvape Aegis Nano is an absolutely stylish mini pod format kit, it adopts a classic and popular, slightly futuristic Aegis style design. Make the nano version truly eye-catching. The ultra-compact and extremely light Aegis Nano Pod kit is a high-quality product made from a strong material mixture and ergonomically designed. Thanks to non-slip rubber components, Aegis Nano is easy to hold and absolutely safe during vaping, and it is very easy to use. The industry-leading Geekvape tri-proof technology is also used on Aegis Nano. Featuring waterproof, dustproof, and shockproof features, which makes the Aegis Nano Pod kit the ideal outdoor companion. Get the highest performance in the smallest space - Aegis Nano has an integrated 800mAh battery and can be quickly charged with a charging current of up to 5V/1A via USB Type-C. The Aegis Nano Kit can provide variable power output from 5 to 30W. The complete operation of the kit and all settings can be completed only through the convenient fir button on the side of the module. The system can be turned on and off with 5 quick clicks, the puff counter can be reset by 4 clicks, the power setting can be entered by 3 clicks, and the fire button can be locked and unlocked by 2 quick clicks.

The Aegis Nano Pod with an integrated style mouthpiece also has a very sporty shape, which together with the battery pack can form a perfect overall appearance. The magnetic pod can be firmly fixed on the Nano Mod and can be easily removed again, just press the marked side with your thumb and push it up from the Mod. Aegis Nano Pod adopts a leak-proof design with a capacity of 2ml, top filling port. Pinch the cap, pull it apart, open the lid and fill in your vape. An easy way to fuel up your day. There are two types of Aegis Nano Pod: 0.6ohm Pod, 1.2ohm Pod, which can provide a pleasant MTL and RDL vaping experience. For the RDL vaping in the power range of 20 to 25W, you can choose a 0.6ohm pod, for the power of 11 to 14W, you can choose a 1.2ohm pod for the more classic MTL. Geekvape Nano delivers an immersive flavor for a vape of its size. There is a sliding switch on the side of the mod to adjust the airflow. A precise airflow control that allows flavor amazing at each level.

Parameters:

• Battery: built-in 800mah battery
• Output: 5-30W
• Output Voltage: 0.1-6.0V
• Input Voltage: 4.5-5.5V
• Input Current: 1A (max)
• Screen: 0.69 inch Display(OLED black and white screen)
• Minimum Voltage: 3.2V土0.1V
• Resistance Range: 0.20-3.0Ω
• Vaping Time: 10s
• Temperature Control: 100℃ -315℃/200℉-600℉
• Charging Port: Type-C
• Resistance: 0.6Ω(Pre-installed, 20-25W)
• 1.2Ω(11-14W)

Features:

• Internal 800mah battery, 5-30W output
• 0.69 inch Display(OLED black and white screen)
• Tri-proof Pod for RDL vaping
• Adjustable airflow switch allows flavor amazing at each level
• Top filling design lets you fill up your day with ease
• Type-C quick charging
• Easy coil-feet cutting
• Auto Output Adjustment for Refillable Pod with Magnetic Click connection
• Type-C quick charging
• Stylish Neck Chain, Nano got style

Package Content:

• 1x Geekvape Aegis Nano Kit
• 1x Aegis Nano Pod
• 1x Type-C
• 1x Lanyard
• 1x Spare Parts
  

Geekvape L200 (Aegis Legend 2) Kit is composed of Geekvape L200 mod and Z Sub Ohm Tank 2021 version. Thanks to the second-generation Geekvape Tri-proof technology, the L200 kit is 30% lighter and 15% smaller than the previous generation. Two 18650 battery units (not included) ensure a long-running time, and can also be quickly charged using the USB Type-C port. To facilitate charging, Geekvape designed a new charging port with a flip cover. This design can effectively prevent the problem of failure caused by water ingress. In addition, a new A-Lock is designed on its side. The lock protects you from over-burnt coil or overheating by the accidental press.

Geekvape L200 Kit collocation the latest Z (Zeus) Sub Ohm Tank 2022 from the Z series - pure taste and excellent performance. A beautiful atomizer with noble style elements, it is not only a reference tank in flavor but also convincing because of its top leak-proof ability. The filling volume of 5.5ml also provides a long-term inhalation experience for the vapers and can be easily filled with the top filling system, which now has a larger opening. Z (Zeus) Sub Ohm Tank 2022 expands filling holes and airways to increase air inflow and redesigns the base for better connection. It also has the iconic leakproof top airflow system of the Z series. By placing an infinitely variable airflow on the top of the tank, the tank can be protected from leakage from a fixed pressure. The Tank is compatible with Geekvape Z Series Coil, with two Z Coil, including a new design 0.25ohm KA Mesh Coil, exude dense vapor, excellent taste.

Parameters:

• Battery: dual 18650 batteries (not included)
• Output: 5-200W
• Output Voltage: Max 12V
• Output Current: Max 45A
• Resistance range: 0.1-3Ω
• Screen: 1.08 inch TFT color display
• Charging Port: Type-C Port
• Low voltage warning: 3.2V±0.1V
• PCBA Temperature alarm: 80℃
• Longest vaping time: 10s
• Stand-by current: < 10uA
• Operating temperature: 0℃- 45℃
• Storage temperature: - 20℃-60℃
• Relative humidity: 45%RH-75%RH

Features:

• -Smaller & lighter
• -Accidental press protection
• -1.08-inch TFT color screen
• -Powered by dual 18650 batteries, max 200W output
• -New tri-proof: IP68 Rating Waterproof, Shockproof and Dustproof
• -Larger air slots
• -Top airflow system
• -Adjustable airflow
• -Leakproof design
• -Geekvape Z series coil
• -Cooling mode: natural cooling
• -A-Lock protects you from over-burnt coil or overheating by accidental press
• -Type C charging port with flipping cover, easier to fuel your vape
• -Wide Working Temperature Range
• -Geekvape Zeus Sub-ohm 2021 Tank, larger air inflow & better performance

Package Content:

• 1x Aegis Legend 2 mod
• 1x Z Sub ohm Tank 2021 (5.5ml)
• 2x Geekvape Z Series coil(Pre-installed: 0.2Ω 70-80W; Spare: 0.25Ω 45-57W)
• 1x Coil Tool
• 1x Type-C
• 1x Spare glass tube(5.5ml)
• 1x Spare parts
  

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This is a decent performing cell that should be available at a lower price. This could make it a good choice for applications where a more expensive high performance cell isn’t needed.

It is almost equal to the Samsung 25R8 at 10A but doesn’t perform quite as well at 20A. While the datasheet’s 20A continuous discharge rating seems reasonable the 25A ”max instantaneous discharge” rating results in more voltage sag and you must not let the cell get hot. I recommend staying under 20A to reduce voltage sag and increase cell life.

The two cells I tested delivered 2606mAh and 2634mAh. This is typical consistency for a China-manufactured cell.

Two cells were purchased for testing by me from Liion Wholesale (Liion Wholesale Batteries | Li-ion battery/cell distributor).


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum

Hi, Freemaxers, now you will have a chance to win Maxus Max 168W Limited Edition again. Maxus Max 168W Kit with dual 18650 external batteries has outstanding performance in making abundant clouds and marvelous flavors.

How to get one Maxus Max 168W Limited Edition for free? Please click here to enter: Maxus Max 168W Activity | Freemax - Taste the Clouds, Feel the Flavors!

If you have a vape device with a single battery, now it’s time to upgrade to the vape device with dual batteries for higher performance. What’s more, Freemax Maxus Max 168W is one dual battery mod kit but only a single battery mod’s price.

SMOK released two vape kits,smok RPM 5 and RPM 5 Pro Pod Mod Kit.Both have the same features, except for the different size and battery type.

The SMOK RPM 5 reserves the portable appearance of RPM series, and it improves the function and technology of its predecessors. The SMOK RPM 5 and RPM 5 Pro are the outstanding competitors of pod system devices in the market.RPM 5 Pro use a single 18650 battery,bt not included.The internal 2000mAh battery capacity and 6.5ml juice storage makes the SMOK RPM 5 and RPM 5 Pro a real BEAST POD for long-lasting companion.

You will adjust the wattage from 5W to 80W as you like. All vaping status showed clearly on the color screen too. Meanwhile, the SMOK RPM 5 upgrades its UP/DOWN button for easy click. The type-C charging port from SMOK RPM 5 not only ensures a fast charge but a safe and stable use. You can install the RPM 3 0.15ohm Meshed Coil in it. The transparent pod of SMOK RPM 5 Kit features visible juice level window so you will clearly see the liquid remains. The SMOK RPM 5 Pod uses side refill design.

Go to best online vape store to order.

Quick link:

SMOK RPM 5 & RPM 5 Pro Pod Mod Kit 2000mAh 80W
SMOK RPM 5 Empty Pod Cartridge 6.5ml (3pcs/pack)

Dear valued customers,

The brand new March is here. So Healthcabin is here to bring our new round of giveaway.

We are now partnering with Hellvape to giveaway Fat Rabbit Solo RTA with 10 winners in total. Ends on 10th Mar. Wanna test it for free? Join us and win them home!

*Colors will be shipped out randomly if you are lucky to win!

About Hellvape Fat Rabbit Solo RTA
The Hellvape Fat Rabbit Solo RTA is a 25mm diameter single coil RTA with a pillarless design that provides ample space to build coils more easily and conveniently. It also has a built-in 4.5ml capacity e-liquids fillable tank, which can minimize the possibility of leakage by quartering the top filling of the rotating top cap. The interchangeable drip nozzle with an anti-condensation design makes the user’s experience more comfortable. Powerful dual adjustable airflow system: Directional flow of bottom airflow and side airflow brings the flavor to new heights, enjoy the purest cloud.



Join & Win
Finish the tasks below and win Hellvape Fat Rabbit Solo RTA home easily. Good luck to you all!!

If you cannot load the contest table below, please click here to join.

Please click here to join: HealthCabin Giveaway or Hellvape Fat Rabbit Solo Giveaway | HealthCabin

Hello
I am kinda hoping someone can help me out here. I have grasping issues with my hands and the only box mod I have found that helps is the Eleaf iKonn 220 TC Box Mod but I have not been able to find a replacement for the one not working right now. Anyone that can help is appreciated.

Flawless from the first pm to the perfect packaging when I received it. I would not hesitate to purchase from Jet Knight again. A+ from me!!

I this two min video published March 11,2021- Jordan Peterson cries talking about Jesus Christ (short clip). I myself can personally relate to this. Can you?

In Aug 1990 I knew nothing about who Jesus was/is. Yet G-d sent me to Jews 4 Jesus. Five minutes after walking into Jews for Jesus at 7:30 at night. The book of ISAIAH Chapter 53 was opened and it was read to me. For the first time in my life I understood the Word of G-d though it was a written Word it was G-d revealing Himself to me. G-d is good - G-d is Love.

Login to view embedded media

Check out the Vaporesso LUXE 80 S Pod Kit, featuring 5-80W output range, GTX Coil Series compatibility, and operates on a single high-amp 18650 battery. Utilizing a single high-amp 18650 battery, the Vaporesso LUXE 80 S Pod Kit offers up to 80W of output for delivering delicious vapor from your favorite eJuice or nicotine salt. Outfitted with the AXON Chipset, this chipset allows for rapid heating and vapor production, offering an ideal wattage suggestion for any installed coil by detecting the resistance. In addition, the compatibility with GTX Coils means there is a large offering of compatible coils, catering to the variety of vapers and their preferred vaping styles.

Specification:

• Display: 0.96” TFT Screen
• POD Capacity : 5ml
• Output Wattage: 5-80W
• Battery: Single 18650 Battery (Not Included)
• Charging: Type-C, 5V/2A
• Coil : GTX 0.2Ω MESH Coil (45-60W) | GTX 0.3Ω MESH Coil (32-45W)

Package Content:

• 1 x LUXE 80 S MOD
• 1 x GTX POD 26(5ml)
• 1 x GTX 0.2Ω MESH Coil
• 1 x GTX 0.3Ω MESH Coil
• 1 x Type-C USB Cable
• 1 x User Manual
• 1 x Warranty Card
  

Vaporesso Luxe 80 is the new Pod Mod Kit of the Vaporesso Luxe series, the ergonomic body has a compact design, and the size is more refined than the previous. Luxe 80 gives you a luxurious feel combined with a classic appearance. The size of the LUXE 80 S Kit is a bit slender compared to LUXE 80 Kit. LUXE 80 Kit is powered by a longer long-lasting built-in 2500mAh battery, LUXE 80 S Kit is powered by a single 18650 battery, both of them support Type-C 2A fast charging which means only takes 75 minutes to fully charge the battery. Comes with a 0.96 Inch TFT Screen, which shows you a clear data display, and comes with an intelligent recognition function, which is very user-friendly. There is a fire button at the top of the screen, Luxe 80's built-in AXON chip can fire immediately at a speed of 0.001s when ignition; there are two wattage adjustment buttons at the bottom, and you can freely switch the wattage what you want. In addition, Luxe 80 equipped with SSS leak-resistant technology, luxe 80 extends the life of your favorite juice by building a barrier, using our sss leak-resistant technology, locking your juice in. Red ring-added layer of protection perfecting leak-proof precision from the inside to the battery. The Pod Tank with a capacity of 5ml has convenient airflow adjustment, the magnets are designed to allow for a precise airflow adjustment, giving you control of the amount of vapor that you desire.

Specification:

• Display: 0.96” TFT Screen
• POD Capacity: 5ml
• Output Wattage: 5-80W
• Battery: 2500mAh
• Charging: Type-C, 5V/2A
• Coil: GTX 0.2Ω MESH Coil (45-60W) / GTX 0.3Ω MESH Coil (32-45W)

Package Content:

• 1 x LUXE 80 MOD
• 1 x GTX POD 26 (5ml)
• 1 x GTX 0.2Ω MESH Coil
• 1 x GTX 0.3Ω MESH Coil
• 1 x Type-C USB Cable
• 1 x User Manual
• 1 x Warranty Card
  

Juucy Model X is a pre-filled disposable pod vape device that is compact, light and portable. All of Juucy's disposable pod devices are very convenient since they require no maintenance, charging or refilling. Each 6ml portable pod of Juucy Model X comes pre-filled 5% (50mg) of e-liquid and is available in a variety of flavors that will keep you satisfied for a while. Check out our collection of disposable vape bundles!

Device Details:

• Capacity: 6ml
• Puff Count: + 1600
• Nicotine Strength: 5.0%
• Battery Capacity: 950mAh
• Flavors: 18 Available Flavors

Package Content:

1x JUUCY Model X Disposable Vape Device

Suorin Trident is one of the fastest firing speed Pod Mod. It has a record firing speed of 0.006s, which is ideal for users who are looking for some strong power output with a short ignition delay With a cylindrical zinc alloy shell, the back is decorated with a huge carbon fiber lining, the profile of the fuselage is inspired by the SLS racing version, and it hand feels perfect when gripping the device. Excellent atomization power and uncompromising lightweight structure bring you a high-quality experience of vaping. Trident is powered by a single replaceable 18650 battery (not included). To replace the battery, just unscrew the battery cover on the bottom of the device. Equipped with a Type-C port to help optimize charging efficiency and service life. Drive vaping passion with efficiency. Suorin Trident uses an intelligent ORI chip internally, which adds a new look to voltage regulation-automatically achieves a perfect balance between wattage and mesh coil, and you can also adjust it from 5W to 85W according to your own preferences. With the function of voltage management, power distribution, temperature management, and atomization monitoring, the ORI chip can accurately control and manage the entire process of atomization. ORI chip can also be compatible with different atomization coils such as single mesh and triple mesh coil, ensuring you the best performance of atomization. In addition, it is also equipped with an innovative boost converter: constant voltage output for steady performance even as your battery level goes down.

At the top of Suorin Trident is a Suorin Trident pod cartridge that holds up to 4.4mL of e-liquid and is easily refilled through a bottom fill port. 4.4ml capacity can bring you a long-term atomization effect and reduce the filling time. Through the visible oil level window, you can clearly see the e-juice level. The new 0.4ohm TRI single mesh coil (interchangeable) and 0.2ohm TRI triple mesh coil are used in the pod. Single-hole mesh coil is designed for pure flavor and more subtle clouds, while three-hole mesh coil has larger clouds and provides a strong flavor. All do-it-yourself coil build users can use an additional TRI-RBA coil (not included). With the dual airflow adjustment dial, Trident can precisely adjust the airflow to maximize the overall atomization efficiency. And the individual airflow setting is carried out directly on the bottom side airflow control ring of the coil.

SPECIFICATION:

• Size:120mm(Height) x 34.6mm(Width) x 31.2mm(Depth)
• Weight:114g(Without 18650 Battery)
• Material:Zinc Alloy + Plastic
• Battery:Replaceable 18650 Battery
• Charging Time:2H (charging with Trident)
• Outpur Wattage:5-85W
• Working Voltage:3.3-4.2V
• Charging Interface:Type-C
• Charging Current:1.0A
• Cartridge Capacity:4.4ml
• Filling Method:Bottom Filling
• Coil Resistance:TRI Single Mesh 0.2Ω 0.4Ω 0.6Ω
• TRI Triple Mesh 0.2Ω
• TRI RBA (optional)
• Colors: Silver, Gunmetal, Blue, Black Green, Lively Green, Rainbow, Red

Package Content:

• 1 x Suorin Trident Kit (TRI Single Mesh 0.4Ω included)
• 1 x TRI Triple Mesh 0.2Ω
• 1 x User Manual
  

Suorin Air Mod Kit is based on the popular Suorin Air series, inspired by Cyborg style, designed as a sense of technology futuristic vape kit. Various improvements have been made while retaining its famous classic card-style design. In terms of appearance, the Suorin Air Mod uses a zinc alloy frame on one side, which is smooth and durable; On the other side, a translucent and lightweight PCTG cover is used, with internal parts and circuit boards visible. Let you feel the beauty of the future! The compact and slim body contains a lot of energy. The built-in 1500mAh large-capacity battery can last for several days, which is the largest battery capacity in the original Air series. The upgraded Type-C port can speed up the charging speed and extend the service life by 50%, thus providing you with greater power and endurance in all situations. In order to better understand and control your vaping status, the Suorin Air Mod pod kit has added a 0.96-inch display on the side of the PCTG panel. This all-in-one Pod system kit has been upgraded in many ways. The maximum output power is 40W. It utilizes the draw-activated or button-triggered firing system for easy vaping on the go.

Holding up to 3ml of your favorite E-juices or nic salts, the Suorin Air Mod cartridge adopts the upgraded atomization technology with a new internal structure. Fill the e-juice through the side. Two types of mesh replacement coils are provided, and even in this small and thin pod kit, you can get a strong throat hit, pure flavor, and big vapor. The new 0.6ohm and 0.8ohm mesh coils are only compatible with this Suorin Air Mod kit, and not compatible with the previous Suorin kit. The unique Z-shaped air hole design inside the Suorin Air Mod cartridge can effectively balance the heating area and heating speed, then giving you a better vaping experience. The top of the pod possesses a hidden mouthpiece to provide you with a smooth MTL vape while maintaining stealth. There is a ring on the side of the Suorin Air Mod, located above the fire button, which allows you to adjust the airflow according to your personal needs.

SPECIFICATION:

• Material:Zinc-Alloy+PCTG
• Size:42.6mm x 14.1mm x 99.6mm
• Battery:1500mAh
• Output Power:5-40W
• Charging:Type-C
• Screen:0.96" TFT Screen
• Capacity:3ml / 2ml(TPD/UK)
• Filling:Side Filling
• Resistance:0.6Ω/0.8Ω
• Colors:Clear Silver, Clear Blue, Clear Green, Clear Red, Gunmetal, Black, Sunglow Red, Rainbow

Package Content:

• 1 x Suorin Air Mod Device
• 1 x Suorin Air Mod Empty Cartridge
• 1 x Suorin Air 0.6ohm Mesh Coil
• 1 x Suorin Air 0.8ohm Mesh Coil
• 1 x USB Type-C Cable
  
  
• 1 x User Manual
  

You can blame one of your long-standing members for me joining. We’ve never met, but I stumbled across his thread about extracting e-liquid from tobacco and decided to try my hand at it. I’m sure there will be questions.

I’ve been a cigarette smoker over forty years and finally decided to quit. It’s been more than five (loooooong) weeks using a patch for the chemical addiction and vaping zero nic to replace the ritual.

During my smoking days, I ventured into pipes and found smoking them enjoyable. The convenience of cigarettes coupled with the lack of leisure time sent the pipes into storage, though. I’d always thought that if I quit cigarettes I might return to the pipes. That’s a decision to make after I’ve been off patches for a while.

For vaping, I’ve tried two different NET manufacturers, one okay, the other disappointing. Why can’t I find anything close to my old favorites of Marlin Flake, Escudo Navy Deluxe, and Kingfisher? Well, I think @PapawBrett handed me an answer in a canning jar.

For the time being, I’m auditioning commercially available NET liquids to carry me until a batch of “home brew” is complete.

Jon

Air Mod kicks things off with a powerful 1500mAh battery within such a sleek body.

its also have different kinds of colors,you can choose the best your like.



Our website YOUMEIT also offer Competitive discounts for vapors
MORE DETAILS:<(Suorin Air Mod Pod Kit- Buy Direct | YouMe>

Physical Parameter


Material: Zinc Alloy + Plastic
Battery Capacity: 1500mAh
Cartridge Capacity: 3ml/2ml
Charging Interface: Type-C
Charging Current: 1.0A

AIR PRO-The original card design continues the slim and compact portable experience.
Incorporating a flowing lines, more comfortable in hands.

The original taste, the vapor, the throat hit,
Everything you most care about are within Air Pro.


Cartridge Capacity: 4.9ml
Resistance: 1.0Ω
Output Power: 18W
Battery Capacity: 930mAh
Charging current: 1000mA
Material: Zinc Alloy+ PCTG
USB charging, Pogo Charging



FOR MORE Information:Suorin Air Pro Pod Kit- Buy Direct | YouMe
you will get more discounts,don't miss it

Today,I wanna introduce you the Eleaf IORE VINO Disposable Kit,it is powered by a 650mah rechageble battery and has a 2ml refillable pod cartridge.

The true flavor

The mesh coil inside Eleaf IORE VINO coupled with the innovative WIDEWICKTM technology delivers to you a boosting true flavor from your favorite e-liquid.

Start from simple

The automatic draw makes IORE VINO an easy-to-use starter kit for new vapers or vapers on the go.

If you need more details,click vape near me to visit.

Quick Link:Eleaf IORE VINO Disposable Kit 650mAh 10W

Hi, Freemaxers! Good News! Please take Freemax’s questionnaire now and you will have a chance (10% chance) to win Freemax Maxus Max 168W(first prize), any one of Freemax’s tanks you want(second prize), and any pack of Freemax’s coils you want(third prize).

The valid time of this survey is from 27th, Feb to 14th, Mar. The winners will be announced on Freemax's Offical Website on March 16, 2022.

Please click here to enter this survey: Take Surveys To Win Maxus Max 168W Kit | Freemax - Taste the Clouds, Feel the Flavors!

Dear valued customers,

The brand new March is here. So Healthcabin March Sale 2022 is ready, with 4 vape deals in total. Take the chance to join us and save more on your favorite products!

A. Sign in to get 30% OFF

• Old customers – Please sign in directly to get your member VIP price, which is about 30% cheaper than regular price (the price before login).
• New customers – Please create a new account to get the same member VIP price.

Note: For all E-liquid products & DOVPO products, the member VIP price is the same with regular price, but we are offering better discounts, let’s chck it out.

B. 15% OFF Sitewide
We also created an extra 15% OFF discount coupon code, which is available for your whole order. Let’s check it out!

Coupon infos:

• Coupon code: MAR15
• Date: 1st – 14th Mar, 2022(-0600 GMT)
• $1 Flash Sale products excluded
• Retail Only

C. Giveaway – Free New Vapes
We are now partnering with Uwell & Smok to giveaway Caliburn G2 Pod Kit & Novo 4 Mini Pod Kit with 10 winners in total. Ends on 1st Mar. Wanna test them for free? Click here to join and win!

Prizes:

• 5*Uwell Caliburn G2 Pod Kit
• 5*Smok Novo 4 Mini Pod Kit

*If you are luckly to win, you will get one of the prizes randomly.

D. Vape Deal Links
Here are some other useful links where you can find our best deals:

• Weekly Sale – Best price for new hot vapes with 17% OFF Coupon: WSHC
• $1 Flash Sale – Ultimate cheap vapes
• Clearance – Extremely cheap vapes!

Please view the March Sale 2022 here.

Vaporesso GEN 80 S Kit

GEN 80 S Kit is composed of GEN 80 S Mod and iTank 5ml. It supports single external 18650 battery with 80W max and Type-C charging. Equipped with the AXON chip, it can bring powerful and flavorful clouds with every puffs. There are pluse/F(t)/VW mode available here. The GEN 80 S is also fire resistant, wear proof and comfortable grip. The Vaporesso iTank of 5ml has easy top filling system, turbo airflow system, and liquid self cleaning system. GEN 80 S Kit is fit for GTi 0.2Ω Mesh Coil (60-75W, best at 70W), GTi 0.4Ω Mesh Coil (50-60W, best at 55W), GTi 0.15Ω Mesh Coil (75-90W, best at 85W) and GTi 0.5Ω Mesh Coil (30-40W, best at 35W) and GTi 0.2Ω & 0.4Ω are included in the package.

Details:
1. Pack light, perform might
2. 4 layers of rubber coating and ergonomic shape
3. Fire resistant, wear proof and comfortable grip
4. 3 bigger screw for stronger 510 connection
5. Composed of GEN 80 S 80W Mod and iTank 5ml
6. Supports single external 18650 battery with 5-80W power output
7. AXON chip, powerful and flavorful clouds with every puffs
8. Pluse Mode/F(t) Mode/VW Mode available
9. DC 5V/2A, Type-C charging, 0.96'' TFT screen
10. 5ml capacity, top filling, turbo airflow system, liquid self cleaning system
11. Fit for Vaporesso GTi 0.2Ω/0.4Ω/0.15Ω/0.5Ω Mesh Coil




GEN 80 S Mod

GEN 80 S Mod supports single external 18650 battery with 80W max and Type-C charging. Equipped with the AXON chip, it can bring powerful and flavorful clouds with every puffs. There are pulse/F(t)/VW mode available here. The GEN 80 S features polycarbonate for fire resistant, 4 times metal spray for wear proof and breathing rubber coating for fingerprint free. It also features the 3 bigger screws for stronger 510 connection. GEN 80 S Mod is compatible with Vaporesso iTank 5ml.

Details:
1. Pack light, perform might
2. 4 layers of rubber coating and ergonomic shape
3. Fire resistant, wear proof and comfortable grip
4. 3 bigger screw for stronger 510 connection
5. Compatible with Vaporesso iTank 5ml
6. Supports single external 18650 battery with 5-80W power output
7. AXON chip, powerful and flavorful clouds with every puffs
8. Pulse Mode/F(t) Mode/VW Mode available
9. DC 5V/2A, Type-C charging, 0.96'' TFT screen




Yocan Orbit Vaporizer Pen Kit

Orbit Kit is a Vaporizer Pen Kit. It is made with exquisite workmanship. Utilizing top vertex airflow system and spinning quartz balls, which will help Orbit produce even heating distribution and sufficient vaporization. Orbit is built with 1700mAh battery and type-c charging port. There are 3 voltage levels for you to choose: 3.4V, 3.7V and 4.0V. And the 10s preheat function will offer greater preparation for you.

Details:
1. Coil-less quartz cup at the helm
2. Top vertex airflow system
3. 1700mAh rechargeable battery
4. 10 sec preheat, spinning quartz balls
5. 3 voltage levels: 3.4V, 3.7V, 4.0V
6. Type-C charging port

Hello and welcome back to another review on a Lost Vape product. This time I was sent the Lost Vape Orion Mini in order to provide a fair and honest review. If you’ve been around for a while you might remember the Orion series of products. I still have a couple of the Orion Q and an Orion DNA but haven’t used them in a long time. This latest revision in the Orion series is still a well-built device but simplified for easier use. The Mini had not been released yet when I received it but I saw that a few websites had it listed but they said that it had three power levels when it does not and it is not mentioned in the user manual. The body is made of zinc alloy and has an 800mah battery capacity with an output range of 8-17 watts. The pod tank has a 3ml liquid capacity and there are two coils included. There is the UB Mini S1 which is .8 ohm rated at 12-17 watts and the UB Mini S2 which is 1.0 ohm coil rated at 9-13 watts.





WHAT’S IN THE BOX?

1 Lost Vape Orion Mini

1 Lost Vape Orion Mini Pod

1 0.8ohm UB Mini S1 Coil

1 1.2ohm UB Mini S2 Coil

1 Type-C USB Cable

1 User Manual

1 Warranty Card






SPECIFICATIONS AND FEATURES:

Quest Chipset

Dimensions - 88.5mm by 34.2mm by 14mm

Integrated 800mAh Battery

Wattage Output Range: 8-17W

Zinc-Alloy Chassis Construction

Intuitive Firing Button

LED Indicator Light

3mL Pod Capacity

Side Fill System - Silicone Stoppered

Adjustable Airflow Control Switch

Lost Vape UB Mini Coil Series

0.8ohm UB Mini S1 Coil

1.0ohm UB Mini S2 Coil

Press Fit Coil Installation

Low Battery Protection

Short-Circuit Protection

Open-Circuit Protection

10S Overtime Protection

Type-C USB Port













INITIAL THOUGHTS:

The Orion Mini came in a two part white box with outer sleeve like I’ve become accustomed to seeing from Lost Vape. The device pictured on the front of each of the two samples I received matched the actual device inside. Also on the front is a label stating that it uses a new Quest chip. At the time of writing this review I had no information on this new chip.

It’s simple but nice packaging. On the back of the box is a contents list and on one side there are some features listed as well as a Lost Vape authenticity code on the back. This is only a small annoyance but I don’t like when I open a device and the paperwork is on top and falls out. This happened when I opened both samples where one of the papers fell to the floor. Like I said it’s a small thing but does kind of bug me. One other thing I’ve seen repeatedly from different manufacturers is the accessories are in a box underneath the device with a cut out pull tab. Almost always the tab tears due to the box being so tightly fit in the outer box.





I received two samples for the review which I greatly appreciate when a company does this. I can then try each coil in a different device which makes testing easier for the review. I received a carbon fiber version and yellow pine wood color version. Lost Vape also was nice enough to send a couple extra pods but no extra coils. That’s fine as it wasn’t necessary in order to test the devices for review.



On the side that I’ll call the front is power button which is used to turn the Mini on/off with five clicks of the button. Other than that it is used to fire the device and has no other function. There are not different power levels adjustable on this model. Near the bottom is a single indicator light that tells the battery level when the button is pressed. The light indicates battery level as follows.

- Green = Fully charged

- Blue = 3.7-3.9v

- Red= < 3.7v

The Mini only has an 800mah battery capacity which I thought wouldn’t last very long and for a pod mod of this size I would have expected at least 1000mah but was pleasantly surprised with the battery life. I was able to run one full tank and about 2/3 of a second tank before the indicator flashed red and I was forced to recharge the battery.

The safety features are as follows.

- Low Battery: LED will flash 10 times and output will shut off when battery voltage goes below 3.3v before using or 3.0v while being used.



- Short Circuit: LED will flash 2 times if a short circuit is sensed.



- Open Circuit: LED will flash 3 times when no atomizer is detected.



- Over 10s: LED will flash 5 times and output will shut off if vaping over 10s continuously.

As you can see in the picture below, there is also the sliding airflow control on this side when the pod is installed. The airflow control is built into the pod rather than the mod.



On one side is the Lost Vape name near the bottom and on the other side is the Orion Mini name. As you can see from the pictures below, the pod can only be inserted one way due to the shape of the mod with one side raised and the pod matches that shape. The body of the mod is made from zinc alloy and has a nice weight and feeling of a quality made product for such a small device.





The side opposite of the button side is just smooth with nothing to show. The top of the Mini where the pod inserts has two gold plated contacts and two magnets that match up with the pod to hold it in place securely. It’s a little hard to see but there is an arrow on one end that points to the button side and is the same side the molded tip of the pod goes to. The pod can only go in one way and is very obvious. While using the Mini, I have had no leaking and the tiniest bit of condensation. Literally just a couple tiny droplets.

The bottom of the Mini has the USB-C charging port and four venting holes. I’m not real crazy about devices like this that you can’t stand up while charging but it’s not that big of a deal.





The pod for the Mini has a 3ml capacity which is pretty good for a small device such as this. The pod is all one molded piece so the drip tip is not replaceable. I’m not sure why they changed this as some of the previous versions did have removable tips. The tinting on the pod is a little too dark in my opinion. You don’t have to have a flashlight held up to it to see the liquid level but it’s not super easy to see. Also on previous versions I had in the past they were all top fill where this new one is a side fill. The rubber plug seats into the fill hole very tightly and I was afraid I was going to tear the plug the first time I tried to open it. However, it has not leaked a drop so maybe it needs to be that tight. The fill plug is marked with an arrow and the word OPEN so you know which side to pull from. The airflow control slides vertically and is built into the pod. I have been liking it mostly open with both coils. This one isn’t a cloud machine but produces a decent amount of vapor and the flavor production is pretty good.

The .8 and 1.0 UB Mini coils are long and skinny little coils. When you insert the coils into the pod then you have to make sure to insert them so that the slot in the coil goes to the side rather than in line with the airflow control so that the shape of the coil matches the cut out in the bottom of the pod so it can be fully pushed into the pod. The bottom of the pod has two magnets that align with the ones in the mod. The pod is held very securely and I have had zero issues with it coming loose accidentally.













FINAL THOUGHTS:

Overall the Lost Vape Orion Mini Pod Kit is a decent pod device. It is small enough to carry in a pocket but would recommend shutting it off as I had mine fire in my pocket at work. Just like other Lost Vape devices I’ve tried it has the feel of a quality built device with the zinc alloy frame and different color variations available. The flavor from the UB Mini coils is pretty good for this type of device and even though it only has an 800mah battery, it seemed to have decent battery life. Is it going to last all day? Probably not if you vape more than 4-5ml from a pod device but should last for most outings.

The Mini doesn’t have variable power levels like some of the previous versions of the Orion but I think that this one is targeted more at the beginning level vaper. It’s pretty simple. Insert the coil, fill the pod, press the button five times, and vape. I do wish they had stuck with the top fill like previous versions had and feel like there is room on top to do that. I don’t love the side fill with the rubber plug but was able to fill from a 10ml plastic bottle without making a mess despite the tinting on the pod being rather dark in my opinion.

I got almost no condensation and no leaking at all from either of the samples I received. I know I’m being picky but with a pod device of this size I really wish they had made it auto draw also. With the airflow control sitting right above the fire button it is kind of easy to cover part of the airflow with your fingers and I had to make a conscious effort at first to not cover the airflow control when pressing the fire button. After some use it became somewhat of a reflex as I knew how I needed to hold it.

So, would I recommend the Lost Vape Orion Mini Pod Kit to you? If you’re looking for a small reliable pod device that can easily be put in a pocket or purse that doesn’t seem to leak in my experience then yes.

I’d like to thank Lost Vape and Antonia for sending the Lost Vape Orion Mini Pod Kit samples for this review. A big thanks to you the readers that allow me to do this. Below is a link to the website for your convenience.

Orion Mini Pod Kit – Lost Vape