• Locked
OXVA Arbiter 2 RTA - Top to Bottom Fanned Airflow

OXVA-Arbiter-2-RTA-Atomizer-5ml.jpg



Smaller and a big leap forward! As an improved mini version of the original Arbiter, the OXVA Arbiter 2 features a top-to-bottom fanned airflow on its postless build deck, which improves the flavor further while eliminating leakage.


The OXVA Arbiter 2 RTA Rebuildable Tank Atomizer becomes an outstanding RTA for its top-to-bottom fanned airflow, allowing air to flow through the glass several circles to make the resulting cloud purer and flavor smoother. On the other hand, Arbiter V2 sets an advance of honeycomb airflow and researches out the new fanned airflow to unlock the airflow, giving you an exceptional full-bodied flavor. Aside from that, it is composed of coils that are suitable for both single and dual construction, and equipped with a 5ml e-juice capacity that is refilled by the top inlet. When you inhale via the 810 & 510 ergonomic drip tip, Arbiter 2 RTA will provide you an unprecedented experience. 100% leakproof technology helps RTA stem the liquid effectively and avoid a messy vaping experience and dirty hands.


Features:
510 threading connection
Dimension: 26mm (Bottom: 24.5mm) x 52mm
Capacity: 5ml (Bubble Glass) & 3.5ml (Straight Glass)
Material: SS, Glass, Resin
Drip Tip: 810 & 510 Drip Tip
100% leakproof
Innovative top-to-bottom fanned airflow system
Dual / single coils configuration
5ml capacity, top filling design


More details for OXVA Arbiter 2 RTA, please check >> https://www.3fvape.com/52575-oxva-arbiter-2-rta.html

  • Locked
The Latest Cthulhu Mod Hastur MTL RTA Mini 2ml

Today,I want to introduce you the Cthulhu Mod Hastur MTL RTA Mini 2ml.The Cthulhumod Hastur MTL RTA Mini is an innovative single coil RTA tank inheriting from Cthulhu Hastur MTL family design by Brian N (CA, USA) with 2ml e-juice capacity and 22mm diameter. Designed for the best MTL vaping, the Hastur MTL RTA Mini features precise bottom airflow control with 3 air holes and a smaller chamber for better flavor.
cthulhu-hastur-mtl-rta-mini_(1).jpg

Moreover, the Hasturmod vape MTL Mini adopts a simple two posts build deck with two small air holes for easy single coil building and improved flavor. Together with the extremely slim drip tip and easy top filling design, the Hastur MTL Mini is absolutely an excellent vape device for MTL vapers. Just get one and enjoy from vape shops!

You may also like:

Suorin Air Bar Box Disposable Vape Kit 3000 Puffs 1500mAh
Uwell Aeglos H2 Pod Mod Kit 60W

  • Locked
Has Anyone Else Noticed...

... the low availability right now of a lot of popular 18650 batteries? I've just been to 5 of the recommended battery retailers and all of them are completely out of most Samsung batteries, particularly the 30Qs. There is also very low availability of many other commonly used batteries. Anyone know what is going on?

  • Locked
Getting back into it... anything new and wonderful?

I quite vaping in 2018. I decided to get back into it (ain't getting any younger, don't care to get much older... and I miss nicotine)
Anyway, I was mostly into drippers and squonkers, typically using 316L at around 0.3 ohms and Japanese organic make-up pads to make wicks.

So boys, girls and they (look at me, 65 and kinda 'woke')... what's new and wonderful that would fit into my kit?

Cheers... SoF

  • Locked
FREEMAX MARVOS S 80 WATT KIT review by hittman

It’s good to be back. I guess I really never left. The review schedule has been very busy lately. This time I will be doing my best to cover the Freemax Marvos 80S. The Marvos is the third in the Marvos line of products that I’ve tested for review. First was the Marvos 80T tube style mod and then the Marvos 60 which is a more durable pod mod that uses the same tanks and coils as the 80T. Now comes the Marvos 80S which also is compatible with the same pods and coils but this one has a 510 connection and provides a 510 base for the pod so you have the option of either using the 4.5ml pods or you can use one of your own tanks on it. The 80S is being called a SBS(side by side) mod due to its design but to me isn’t necessarily what I consider a true SBS mod in the truest sense. Besides having the 510 connection it also uses a replaceable 18650 battery which adds convenience for the user.


Marvos-s-80w-kit-Collisions-of-Metal-Leather.jpg


WHAT’S IN THE BOX?

1* Freemax Marvos S 80W Mod
1* Freemax Marvos DTL Pod Tank 4.5ml (Freemax MS Mesh Coil 0.15ohm Pre-installed)
1* Extra MS Mesh Coil 0.25ohm
1* USB Charger
1* Warning Card
1* Warranty Card
1* User Manual



marvos-s-80w-kit-tpd-edition.jpg


upload_2021-9-27_14-39-3.png


SPECIFICATIONS:


upload_2021-9-27_14-41-16.png


FEATURES:

  • 1. New side-by-side mod/pod mod kit of Freemax
  • 2. Single 18650 battery, type-c 2A fast charging
  • 3. With Marvos DTL Pod Tank
  • 4. FM COILTECH4.0 Technology, adopts MS platform
  • 5. 510 thread mod, 810 drip tip
  • 6. Two-side airflow control
  • 7. 0.96 inch color TFT screen
  • 8. Three output modes: Power, Smart, Bypass
  • 9. Compatible with both Marvos DTL Pod and Marvos Glass DTL Pod
  • 10. Compatible with MS Mesh Series Coil
  • 11. Made by fine leather and precisely forged zinc alloy

marvos-s-80w-kit-096-inch-color-tft-display-screen.jpg


upload_2021-9-27_14-44-39.png


upload_2021-9-27_14-45-48.png


upload_2021-9-27_14-46-6.png


upload_2021-9-27_14-46-21.png


upload_2021-9-27_14-46-37.png



INITIAL THOUGHTS:

The packaging is what I’ve become very familiar with where the outer shell has a color picture of the device inside and slides off with a two part box underneath. Once the top is removed, the mod with tank installed is visible. One thing that I really liked was that Freemax put a ribbon under the tank so you can easily pull the ribbon to pull the mod and tank up from the foam insert. It can also be used to pull the foam up to access the spare parts pack which includes a second coil, USB-C charging/update cable, user manual and paperwork.

I very much like the appearance of the 80S. On the front/ screen side is of course the display screen with the + and – buttons below it and to the left on the padded imitation leather is the MARVOS S name stamped into the leather. On the bottom is the Freemax name and three battery vent holes.

IMG-6207.jpg


The opposite side has no branding and you just see the gunmetal frame and the nice brown with the stitching that runs around the perimeter. I really like that there is minimal branding.

IMG-6203.jpg


On the end opposite of the leather wrap is the fire button which is nice and clicky. It protrudes a little so it can be easily located. Near the bottom on the same side is the USB-C charging port.

IMG-6923.jpg


On the top of the mod is the knurled threaded battery cap which is removed to install the necessary 18650 battery to power the unit. The threads on the one I received felt gritty when screwing the cap on with a battery inside. There isn’t a marking on the inside of the cap but there is a large red + symbol in the bottom of the battery tube. Also on top is the 510 connection plate that is held in by two torx screws and has a gold plated spring loaded center pin.

IMG-6210.jpg


IMG-6213.jpg


IMG-6215.jpg


The display on the S is very easily readable and shows the following information top to bottom.

- Mode of operation and battery indicator

- Set wattage

- Voltage under load and coil resistance

- Puff counter

- Time of current puff

- Available color displays


upload_2021-9-27_14-53-7.png


The S adjusts in 1 watt increments and does not round robin. When 80 watts is reached then it just says Max Power. It does however scroll very fast if the + or – button is held down.

This mod only has three modes which are Power, Smart, and Bypass so there is no TC on this one which is kind of a shame since the coils are ss904. The button operations on the S are as follows:

- Press the fire button five times to turn the device on or off

- Press the fire button three times to switch between the three modes

- Press the fire button and – button to change the display color

- Press the fire button and the + button to reset the puff counter

- Press the + and – buttons to lock the wattage adjustment

- Press and hold all three buttons to do a factory reset


MS-Platform.jpg


The pod tank that is included with the Marvos S kit uses the same coils as the other Marvos tanks and the included base is in fact compatible with the glass tank that is available for separate purchase.

The drip tip is the same spit back resistant tip which I like and found very comfortable to use but it is replaceable if it’s not to your liking. I like that the tank is nearly clear and I can easily see the liquid level in it.

marvos-s-80w-kit-marvos-dtl-pod-tank.jpg




The pod itself is held in place by four magnets that are located on the bottom along with the fill port which has a rubber plug much like we’ve seen on many other pods of this style. The magnets mate up with the raised metal ring inside the base of the 510 portion of the tank. The coils are push in style and make connection in the base which contains a spring loaded gold plated center pin.

The airflow control is located on the tank base rather than having to turn the pod to adjust the airflow. I like this since you don’t have to worry about messing up your airflow if you turn the pod. Also the airflow base is knurled to make it easier to turn and it also matches the knurling on the battery cap.

IMG-6922.jpg


IMG-6921.jpg


The coils used in the Marvos kits is the MS series of coils. The coils included in the kit are the .15 mesh coil rated for 60-80 watts and the .25 ohm mesh coil rated for 40-60 watts. Also available are the .35 and .5 ohm coils in this series. The coils use tea fiber cotton and are made of SS904 which can be used in temperature control even though this mod does not have that feature.

Freemax_Marvos_S_80W_Kit_MS_Mesh_Coil.jpg


IMG-6231.jpg


IMG-6227.jpg


FINAL THOUGHTS:

I very much enjoyed testing the Marvos S 80 watt kit. I thought the imitation leather was very nicely done with padding underneath and the stitching around the perimeter. I felt like the gunmetal frame and brown leather look were a really great match.

It’s good in my opinion that Freemax has kept with the same MS series coils across all of the Marvos line of devices. The coils are fantastic flavor producers and seem to last quite a while even with my favorite LMN# liquid. As usual I preferred the .25 ohm coil at around 45 watts. The .15 coil had great flavor also but I had to run it a bit lower than recommended wattage. It still performed well around 50 watts.

I did get some condensation underneath the pod but no real leaking. However, I just want to mention that with this style of pod tank, if you are going to let it sit unused for days, take the pod off because they will usually leak if left unused for days.

The design of the Marvos S isn’t new and I’m sure many recognize this style of mod. That’s not necessarily a bad thing. I personally like this style of mod and find it very comfortable to hold and use. It reminded me of the PX80 which I also liked very much. However, unlike the PX80, this one has a 510 connection on the mod which is a huge plus in my book.

So, would I recommend the Freemax Marvos S 80? I really would. In my opinion it’s hard to go wrong with this one. It has a replaceable battery, 510 connection, and the included coils are fantastic flavor producers.

I’d like to thank Freemax and Tina for sending the Freemax Marvos S 80 watt kit for this review. Also a big thanks to my dedicated readers. I truly appreciate your support. Below is a link if you want to see more about Freemax.

Marvos S 80W Kit | Freemax - Taste the Clouds, Feel the Flavors!

  • Locked
Lost Vape Cyborg Quest Kit - A solid single battery mod

PLEASE NOTE: This week marks the first week of a redo of the way the reviews are recorded, as such there might be a few issues with editing and sound.

The Lost Vape Cyborg Quest Kit is another one of the overhauled Quest line of mods, this time Lost Vape is going back down the road of single battery mods, it's just a pity they insist on using plastic tanks...

Lost Vape Cyborg Quest Kit - CHAPTERS

00:00 - Intro and specs
03:41 - Close up
12:59 - Temp Control & Wattage Vape
14:08 - Thoughts


Login to view embedded media

  • Locked
New member, Questions about set up of snow wolf UX

Hi,
I am having issues with my mod. I have been vaping for 9 years. Most of those were with a RDA. I had no issues with it until recently. Also, I was never knowledgeable with Ohms or watts and did not think I needed to be. I changed coils, I cleaned them. I never messed with or changed the watts or Ohms because it vaped fine. This last time I changed coils I started experiencing (whether it be hot juice or a tiny micro piece of cotton hitting the back of my throat with my pull, and immediately causing me to cough and gag uncontrollably lasting for up to 30 minutes. I would change coils and cotton and it would be fine until it happened again. I have a difficult time understanding this part of vaping. What I am supposed to vape at? What coils am I supposed to use?
Currently I have a Snow Wolf UX. I'm using an RdA. I have a pack of different coils with different numbers. Can someone help me figure out how to set this up correctly?
  • Like
Reactions: Superuser187

  • Locked
Suorin Air All-in-One Card-Style Starter Kit

Suorin Air All-in-One Card-Style Starter Kit

air-all-color-jpg.957661


The Suorin Air Starter Kit is an ultra-compact starter kit designed for vapers on the go or simply looking for an easy-to-use device.

    • Features a unique card-style design that is both lightweight and compact due to the aluminum housing. A throwback to the old-school-style automatic batteries with a new modern design.
    • No buttons and is automatically activated when you inhale.
    • Built-in 400mAh battery which may be recharged using the micro USB charging port located on the bottom of the device.
    • The Suorin Air utilizes a magnetic 2.0ml refillable cartridge system which may be filled with your favorite e-Liquid of your own choosing.
Learn more about the Suorin Air Starter Kit and more great products at the official YouMeit Vape Shop >> https://www.youmeit.shop

Don't forget to register at our vape shop to get the code ECYM15 to enjoy the 15% off discount.

Tip: The last usable date of the coupon is Oct.27th, 2021.

Attachments

  • air all color.jpg
    air all color.jpg
    303.5 KB · Views: 44
  • Informative
Reactions: dreamvaper

  • Locked
[EVERZON GIVEAWAY] Voopoo Doric 20 Pod System Kit 1500mah-1 winner-10/12

Voopoo Doric 20 Pod System Kit 1500mah displays the modern intelligence atomization technology that brings you an indulgent experience both visual and physical. Doric is the first group of products to adapt the ITO platform. With its continuous effort, creation for one year to research and unveil the new Innovative Delicious Optimization solution (ITO) platform, it has an absolutely improvement for both the atomization area inside the coil and the heating speed. Based on the ITO platform, the three-level anti-leaking technology employ in the coils can further prevent e-liquid. Coupled with the 2ml ITO pod tank, it is the best assistant to deliver the discreet and unprecedented flavor and cloud. It is powered by a large 1500mAh built-in battery, paired with a type-c charging port and the LED light to remind you of power, bringing you a long-lasting MTL vaping time. Depend on your habitation, you can choose both the draw-activated and button-activated manner. Compared to the Doric 60, it has the slimmest body for on-the-go use.


Prize: 1pc Voopoo Doric 20 Pod System Kit 1500mah


Rules to Enter:
1. Which products do you like best recently? Please comment link from Everzon Store
2. Everzon covered IOSS cost of European Union countries Since 5th August 2021, Did you know?
3. Where are you from?



Note:
1. 1 Lucky winner will be selected by random.org on 12th October 2021.
2. You must be more 18+
3. Number your entry, for instance: #Post 1
4. Max 4 replies for each member

  • Locked
Hellvape Dead Rabbit R Giveaway



Dear Vape Friends,

Hope you are doing well days!

The National Day is just around the corner. To celebrate the upcoming golden week, we are now partnering with Hellvape is going to giveaway brand new Dead Rabbit R Tank with 15 winners in total. Ends on 8th Oct. Come join us and win it home for free!

*Colors will be shipped out randomly if you are lucky to win!

About Hellvape Dead Rabbit R Tank
Hellvape Dead Rabbit R Tank boasts a 5ml vape juice capacity and modifies the structure of its bottom airflow system and a condensed chamber aimed at a more delicate flavor. A 0.2ohm resistant value is recommended to the power range of 50 to 60W. One pack of R coil contains 10 stock coils, allowing you to rebuild your coil 10 times. Compared to the regular coil, it can save 75% cost and enjoy the fun of rebuildable mesh coil with the lowest cost, it also adds a 510 drip tip that conforms to human mechanics, what’s more, it utilizes a strong PCTG plastic material to ensure a superior level of durability.The complete bottom airflow and extremely condensed chamber bring you new level vaping experience, extremely superior flavor. Classic celtic knots design for tight and comfortable grip.Bayonet design for easy opening.

Hellvape-Dead-Rabbit-R-Giveaway2.png


Join & Win
Finish the tasks below and win Hellvape Dead Rabbit R Tank home easily. Good luck to you all!!

Please click here to join: HealthCabin Giveaway or Dead Rabbit R Giveaway | HealthCabin
  • Like
Reactions: Udon

  • Locked
October Brand Discount



Dear Customers,

Hope you are doing well these days!

Here comes Healthcabin new round of brand discount promotion for wholesale only – Oct Brand Discount, with 3% off for selected 10 brands. Take the chance to join us and save more on your favorite vape-brand products!

3% OFF Selected Hot Brands
  • Discount: 3% OFF for selected 10 hot brands
  • Date: 27th Sept – 4th Oct, 2021(-0600 GMT)
  • Wholesale ONLY
  • No coupon code required, total discount amount can be found at your shopping cart
10 of our best selling brands listed below:

Watch out our coming holiday in OCT.



With any questions, please feel free to contact your account manager.

Please view the October Brand Discount here.

  • Locked
Freemax Onnix Series Pod System - 100% Flavor Categories Compatible?

As we all know, Freemax Onnix 2 15W and Onnix 20W Pod System Kits are Onnix series vape kits. If you are looking for one pod system for both RDL and MTL vaping needs, Freemax Onnix 20W can meet your needs. However, Freemax Onnix 2 Kit is designed for high-strength MTL vaping needs. But OX Series Coils can be compatible with both Onnix 2 15W and Onnix 20W Kit.

FmJVA1c.jpg


What’s more, OX DVC Coil Series are equipped with FM SaltCoilTech 3.0, which applies Dual Vertical Coil technology and Freemax Patented Tea Fiber Cotton Formula for strong throat hit and intense nicotine satisfaction. Both are able to support all sorts of e-liquid categories with various VG/PG ratios in the market, both nic salt and freebase. The compatible VG/PG ratio for nic salt e-liquid ranges from 5:5 to 4:6 to 6:4 and for freebase e-liquid from 7:3 to 8:2. In another word, Onnix Series Kits are able to match 100% of flavor categories in the market.
  • Love
Reactions: Bigbob2322

  • Locked
The Latest BMOR Saturn Disposable Kit 1600 Puffs 1000mAh

BMOR Saturn disposable kit is inspired by the adrenaline rush one gets when encountering an exciting event. BMOR aimed to create a compact, light and portable pod device to boost your mood. Each pod stick comes with 5.2ml juice, with power of 1000mAh to keep your vape disposable pod running up to 1600 puffs, which means an average vape will last for about 5-10 days.
bmor-saturn-disposable_(4).JPG

Features

• 1000mAh Built-in Battery
• No Need To Rechargeable
• Exquisite And Lightweight
• Aluminum Alloy Material
• 5.2ml Capacity Of E-juice
• Sleek And Ergonomic Mouthpiece
• 5% Nicotine Strength
• Approximately 1600 Puffs

Please visit vape online store to buy.

Quick Link:BMOR Saturn Disposable Kit 1600 Puffs 1000mAh

  • Locked
2021 National Day Holiday Notice

850X401.jpg


Dear Customers,

The National Day of the People's Republic of China is coming, and we are going to have a holiday to celebrate it.

Shipments and replies to messages will be delayed during the time. Therefore, we highly suggest you placing orders before our holiday time in order to get the parcels ASAP.

Holiday Time: Oct. 1st - Oct. 7th, GMT+08:00

Please note that all our team will be on holiday, our CS team will only be able to deal with some urgent issues. Shipments will be handled from Oct. 6th.

You may mark “urgent” on the title of email if you have any urgent issues, we will get back to you ASAP.

Customer Service: service@sourcemore.com

We will ship out your orders and reply to your messages as soon as we are back to work. Your kind understanding is highly appreciated.

Yours sincerely,
Sourcemore Team

  • Locked
VAPEFLY BRUNHILDE SBS KIT review by hittman

Hello again. I’m here today to discuss the Vapefly Brunhilde SBS 100W Kit that was sent to me by Sourcemore for the purpose of providing a fair and honest review. At the end I’ll have a discount code for you if you’d like to purchase one for yourself.

The Brunhilde SBS was a cooperative project between Vapefly and the Vapefly Deutschland Offiziell group. The Brunhilde SBS kit includes the mod which is made using a 5 axis CNC process from aerospace aluminum and the Kriemhild II W version 4ml tank.


Vapefly-Brunhilde-SBS-Kit-Side-by-side-with-the-German-Community.jpg


Vapefly-Brunhilde-SBS-Kit-Exquisite-Appearance.jpg


WHAT’S IN THE BOX?


Vapefly-Brunhilde-SBS-Kit-Package.jpg


SPECIFICATIONS:
Vapefly-Brunhilde-SBS-Kit-Parameters.jpg


FEATURES:

1. Vapefly & German Community project

2. Consists of Brunhilde SBS Mod and Kriemhild II W Version

3. CNC 5-axis carving processed

4. 1800 seconds for carving a single wing

5. Typical Brunhilde design, German standard

6. Aerospace aluminum casing, light in weight, perfect in hand

7. VW/Bypass/TC output mode

8. 5V 2A type-c fast charging

9. Supports single 18650/20700/21700 battery

10. 3S chip brings safety protections: Short Circuit/Reversed Battery Connection/Low Voltage/High Temperature/Over Charge/10s Cut off Protection

Vapefly-Brunhilde-SBS-Kit-Exploded-View.jpg


Vapefly-Brunhilde-SBS-Kit-3-S-Chip-with-safety-protections.jpg


Vapefly-Brunhilde-SBS-Kit-Battery.jpg


Vapefly-Brunhilde-SBS-Kit-Craftsmanship.jpg


Vapefly-Brunhilde-SBS-Kit-for-Vapers.jpg


Vapefly-Brunhilde-SBS-Kit-VW-Mode.jpg



INITIAL THOUGHTS:

I really liked the looks of the packaging on the Brunhilde SBS kit. It kind of reminded me of an old scroll or something ancient. I haven’t had a lot of exposure to Vapefly products in the past but do have the Galaxies MTL RTA and the Optima pod mod.

upload_2021-9-26_19-8-10.png


The Brunhilde SBS mod is made from one solid piece of aluminum and has real feel of quality in my opinion. If you look closely at the first picture below you can see it comes packaged with a clear plastic film protecting the finish for shipping. I like how the helmet design is engraved into the end and the fire button sits in the middle of it with the USB-C charging port below.

If you’re facing the fire button side then on the left is a wing engraved in the side along with the Brunhilde name. On the opposite side is another wing along with the + and – buttons. Of course like most SBS mods that I’ve seen, the display screen that utilizes the 3S chip is located on the bottom of the mod.

upload_2021-9-26_19-8-53.png


upload_2021-9-26_19-9-12.png


upload_2021-9-26_19-9-28.png


upload_2021-9-26_19-9-45.png


The Brunhilde can use 18650, 20700, or 21700 batteries. The battery cap threads were very smooth on my sample. The inside of the battery tube is clearly marked with a red + sign on the bottom and the top cap has a – sign on it as well so there is no confusion as to how the battery is to be inserted. The top of the battery cap also has a design etched in it. I’m not exactly sure what the design is.

The atomizer top plate is held in place by four torx screws and has a gold plated spring loaded 510 center pin. The Kriemhild 2 tank that is included in the kit is 24mm at the base and 25mm at the body but a 26mm tank should fit on the Brunhilde.

upload_2021-9-26_19-10-25.png


upload_2021-9-26_19-10-49.png


The Brunhilde has an output range of 5-100 watts while using the 3S chip which also provides several safety protections. The Brunhilde has three output modes which are VW, Bypass, and TC. The display which is located on the bottom of the mod is really rather old school in appearance but it is bright enough and easy to read. Also located on the bottom are six battery vent holes. On the left is the battery indicator with the coil resistance and output voltage under load beside it to the right. On the left is the output wattage that is set. There isn’t a menu on the Brunhilde SBS but there are a few functions that can be performed using the available buttons.

- Press the fire button five times to turn the mod on or off

- Press the fire button three times to switch between VW, Bypass, and TC

- Press the + and – buttons to lock the adjustment buttons

- Press the fire and + buttons to flip the screen

- Pres the fire and – buttons to go into stealth mode

upload_2021-9-26_19-12-1.png


KRIEMHILD II W VERSION TANK

Clipboard01.jpg


Clipboard02.jpg


Clipboard06.jpg


I have never seen or used the original Kriemhild 2 tank but from what I can tell the only difference seems to be that the metal portion of the tank comes down further on the top so that the glass section is either smaller or just less visible.

Vapefly-Brunhilde-SBS-Kit-with-Kriemhild-II-Tank.jpg


The tank is 24mm at the base and 25mm at the body. It uses an 810 tapered drip tip that is installed which I personally like but also comes with a second straight tip. The o ring that holds the tip in place is inside the top cap rather than on the tip. The top cap has a bayonet style connection and underneath both fill ports have a silicon cover over them. I personally don’t like this since you can only see a portion of the tank when filling since the glass section is so small. I would rather have the fill holes open so I can see where the fluid level is while filling.

upload_2021-9-26_19-19-1.png


upload_2021-9-26_19-19-16.png


There are three airflow slots on this tank and it allows plenty of airflow. I ended up running both coils with the airflow maybe ¼ open. There are two different coils included in the kit. One is the Duplex Mesh coil that is .2 ohm and the other is the FreeCore Mesh coil that is .3 ohm. Both are KA1. The .2 ohm coil is rated for 45-60 watts and the .3 coil is rated for 40-55 watts. There is also an RBA coil available for purchase separately.

Clipboard05.jpg


The way I understand the Duplex coil is that it has a center common leg so there are three connection points rather than two which splits the resistance of the coil and allows it to come up to temperature quicker.

Clipboard03.jpg


Clipboard04.jpg


The bottom cap unscrews just like any other tank and the coils are simply pushed in and the base is threaded on. I did notice a fair amount of condensation in the base when I went to change coils. However, the tank is easily disassembled for cleaning whenever needed and I always wash a new tank before using it.

IMG-6764.jpg


FINAL THOUGHTS:

I really think that the Vapefly Brunhilde SBS kit is a great and well-designed kit. The mod not only has a high end appearance but the feel in the hand exudes quality with both the mod and the tank.

I did end up running both coils below the recommended settings but had no issues with leaking. I know the Duplex coil is supposed to have better flavor but I actually preferred the .3 ohm coil better. I ended up running it at about 38 watts and got very good flavor production.

I did not receive the RBA for the review but have ordered a couple of them because I would like to continue using the tank but don’t want to be stuck buying yet another different coil.

All of the threads on the mod and tank were very smooth which added to the sense of quality. Even the 18650 battery adapter was nicer than what is included with most mods that can utilize the same three sizes of batteries.

I’d like to thank Sourcemore and Joyi for sending the Vapefly Brunhilde SBS Kit for this review. Thanks as always to the readers. Below is a link the Sourcemore website and as promised I have a coupon code for you.


Vapefly Brunhilde SBS Kit 100W Box Mod with 4ml Kriemhild II Tank (sourcemore.com)

COUPON CODE FOR $66.88 SBSK


IMG-6797.jpg

  • Locked
NEVOKS PAGEE POD KIT - Review

Hi ECF members, In this review I take a look at the Pagee Pod Kit from Nevoks. The Pagee Pod Kit was supplied for the purpose of this review by Agnes from Nevoks.

https://www.nevoks.com/products/pagee/

rdPNqZR.jpg



Introduction

In their short existense Nevoks have become pod device specialist and have shown as their devices have progressed they listen to feedback in an attempt to bring the vaper products they require! I have only just reviewed the Veego 80 which was a SBS Pod Mod with 510 thread adaptor and with the Pagee we see a return to the "Credit Card" style pod device which we saw about 18months ago!

Like the Veego 80 the Pagee ticks a lot of boxes and also brings us what's claimed to be the first 360 degree bottom adjustable airflow! It offers both button activation and Auto Draw, has adjustable wattage and is said to be for both MTL and RDL styles, Let's crack on!

_________________________________________________________________________



In The Box


SojALlk.jpg




Contents:

  • Pagee Device
  • Pagee empty pod 2ml
  • SPL-10 mesh coil 0.6ohm
  • SPL-10 mesh coil 1.0ohm
  • Type-c Cable x 1
  • User Manual
  • Warranty card
  • Lanyard
UvRZw08.png


_________________________________________________________________________



Aesthetics and Ergonomics

The Pagee comes in cardboard box packaging with outer cardboard sleeve, on the front we have a picture of the device in the chosen colour and contents etc on the reverse. I received the Black version which has a Gunmetal Zinc Alloy chassis and Black Carbon Fiber effect panels both sides, the options are Black, Violet Rainbow, Dark Green or Space Grey, the colour refers to the Carbon Fiber effect side panels!

At only 70g the device is lightweight and even for what's become known as "Credit Card" style devices this must be the smallest I have used yet. We have a tinted flat pod with Delrin 510 drip tip, the drip tip is quite wide but has tapered sides to give it a flattened look! Below the pod on the main chassis on one side we have "nevoks" and on the opposite side "PAGEE", within the Carbon Fiber effect panel on one side we have a small screen!

Down the spine of the device we have towards the top a protruding rectangular fire button which has the Nevoks logo embossed into the metal button, below in a vertical position is the Type C USB port. Above the fire button we have an opening and then looking at the top rear we find the opening at the top of the spine comes out here forming a rail for the included lanyard to be attached, staying up top we also have a protruding rectangular wattage adjustment button.

Moving to the base we have branding, venting holes and to the leading edge a plastic adjustable dial for airflow control. The device just gets swallowed up in the hand so is ideal for when out and about!


kXOS0hx.jpg


_________________________________________________________________________



Pagee Specs and Features:

  • Power Range- 5W-30W
  • Output- 3.3-4.2v
  • Battery Capacity- 950mAh
  • Size- 77.6*44.6*12.6mm
  • Material: Zinc Alloy
  • Weight- 70g
  • Pod Capacity- 2ml
  • Multiple Safety functions
  • Type-C Fast Charging (2A/5v)
  • 360 degree Airflow adjustment
  • Button or Auto Draw
  • 510 drip tip fitting
  • Replaceable coils
  • Old School Display
  • Colours: Black, Violet Rainbow, Dark Green, Space Grey
CE3JnHk.jpg

2CP66Ch.png


_________________________________________________________________________



What You Receive?

As well as the device and empty pod you also get 2 different coil heads which are the SPL-10 mesh coil 0.6ohm and the SPL-10 mesh coil 1.0ohm. You also receive paperwork, a short Type C USB cable and although it's not something I would use a rather nice lanyard!


cRAU2pZ.jpg


_________________________________________________________________________



The Pod

The Pod is a flattish almost square shape and although tinted I had no issues seeing the juice level inside. Up top we have a wide drip tip with tapered sides which can turn to have in the most comfortable position depending on how you hold the device, it is also a standard 510 fitting so like me you could also fit an alternative if you prefer!

On the side where the pod slides into the bay so will be hidden from view we have a silicone bung which can be pulled out (while still remaining attached to the pod) to reveal a good sized fill port, as side fill ports go I had no issues being able to fill fast, mess free while completely filling the capacity!

Moving to the base of the pod we have the cylindrical opening for the coil head to be fitted, to one side we have a large magnet and to the other quite a large opening which will feed air to the coil head, this opening lines up with the airflow opening in the pod bay which gets fed by the bottom adjustable airflow control!


0PBdrar.jpg


_________________________________________________________________________



The Coils and Fitting Them

The Pagee Pod deploys the usual plug and play method we see with most of the popular pod mod pods so the coil head just gets press fitted into the pod where it will be sealed via an O-ring and will also seal to the chimney via the top set of dual O-rings.


hwPfQjC.jpg



Two coil heads are included which are the SPL-10 mesh 0.6ohm coil head rated between 18w to 25w and the SPL-10 1.0ohm mesh coil head rated between 10w to 13w. The coil heads are the same that came with the Feelin, it's good to see this cross compatibility!


nXrKFIR.jpg


_________________________________________________________________________



Fitting The Pod

The pod fits via the vertical rail on the device and also strong magnets, we have no play whatsoever! Looking inside the bay we can see the Gold plated positive and negative contacts and large opening which leads right down to the airflow control. We also have two rectangular magnets and the opening to the membrane switch for draw activation!


11QLyIc.jpg


_________________________________________________________________________



The Airflow

This interested me most before using the device and although the airflow control works quite well when compared to similar sized devices which usually have fixed airflow I was quite disappointed and feel the all 360 degree marketing is a con!


PAGEE-详情页-3动图.gif



On the bottom of the device on the same side as the pod bay we have a small airflow slot which I guess is about 4mm and then also a slot on the dial the same size. Obviously when the two slots are lined up we have full airflow but then it can be closed down.

I actually like the idea of an adjustable bottom slot which feeds the slot above in the bay which in turn feeds the coil head but it's just a 4mm slot so yes you can pointlessly turn the dial 360 degrees but it's not 360 degree airflow adjustment as claimed they just couldn't be arsed to fit stoppers!


6Wn0RLM.jpg


_________________________________________________________________________



The Display

We have a much loved old school style of display but unfortunately it's identical to the display on the Veego 80 with the layout just being a bit of a mess. We have both vape duration and 4 digit puff counter rather than the puff count showing duration while vaping and when all 4 digits of the puff counter are in use their is no gap between the two pieces of information. Also we have no gap between the voltage and resistance and when the mode is Manual "M" is displayed between the wattage and voltage readings where there was a space and the whole display just becomes a solid block of numbers and letters!


uVZzqBn.jpg



To the left of the display we have the wattage and to the right of that at the bottom we have "W", if in manual mode we will also have an "M" above the "W"!

To the right of the wattage at the top we have the voltage followed by the resistance. Below to the left we have vape duration and to the right a four figure puff counter which only reveals any field that is in use so 0029P would just be displayed as 29P, finally to the right of the display we have a vertically positioned battery status bar!

_________________________________________________________________________



Operating The Device

The Pagee has a very basic chip and old school display which is all many people require. The device is the usual 5 clicks of the fire button to turn on and five clicks to turn off and once on fire and the wattage adjustment button pressed together locks the whole device including the fire button, although it still allows you to vape using Auto Draw! In fact if you lock the device while in manual mode it will automatically change back to standard mode when locking to allow the Auto Draw feature to be used! The only other combination button press feature is done with the device turned off which is once again the fire and the wattage adjustment button pressed together which resets the puff count!


C7d8LKV.png



The Pagee works as an adjustable wattage device but has two modes which are standard which allows the device to be used via either the fire button or Auto Draw or Manual which only allows the device to be used with the fire button, to change between the two modes is 3 quick clicks of the fire button.


sXTH4hI.jpg



The wattage adjusts in 1w increments from 5w in theory up to the max 30w but the device operates in smart mode by default and it can't be overridden! So with the 1.0ohm coil it adjusts up to 15w and with the 0.6ohm coil up to 25w, also the adjustment can only be increased and not decreased so if you overshoot the wattage intended you have to use the round robin feature to get back to the wattage required, a bit annoying but it scrolls quickly when the button is held down and being such a low wattage device not a deal breaker!

_________________________________________________________________________



Protections:

Overtime Protection 10s
Chip Safety Protection (SCP)
Overcharge Protection
Over Discharge Protection
Over-temperature Protection
Max Power Protection
Low Voltage Protection


QDbwx2h.png


_________________________________________________________________________



Charging

Very impressed with how quickly the Pagee charges. It has a Type C USB connection and 2A max charge rate! I timed the charging progress on 3 occasions and each time it took (+/- 1) 50 minutes. While charging a charging progress bar is displayed along with the charge as a percentage, it also supports pass-through vaping!


psIFt6B.png


_________________________________________________________________________



My Thoughts!

The Pagee gives a fantastic looser MTL and RDL vape, nice and smooth and the flavour from both coils is outstanding which didn't surprise me as I really rated the coils when I used them with the Feelin device! Also good to see adjustable airflow although don't expect anything ground-breaking as it's just a 4mm adjustable slot adjusted by a dial which is quite fiddly and the whole amazing 360 degree airflow marketing c**p is just that!

I actually thought at first this gave a nice tight draw until I realised I was resting the device on my little finger while taking a vape which was actually blocking the airflow! With airflow not blocked it gives either a medium or loose MTL with the 1.0ohm coil and various RDL to semi restricted draws with the 0.6ohm coil, just far too much air leakage to get tighter draws!

I like that you can fit your own 510 and despite the tinted pod visibility of the juice level is very good, not keen that the pod needs removing to be filled but it was a quick and a mess free experience when refilling! I like that the coil heads are the same that are used with the Feelin and as the full 30w isn't utilised with the included coils due to the smart wattage feature then I can only guess other coils will become available!

The wattage only adjusting one way is a con but not a massive issue on this device and I love that it allows either Fire or Auto Draw and it also has a mode to turn the Auto Draw off, I also like that when the device is locked the Auto Draw will still work!

The performance I found to be very good and as tends to be the case these days the Auto Draw was very responsive! The device is tiny which I like a lot but it does leave me a bit sceptical whether at 950mAh they are slightly overstating the capacity although compared the the Caliburn A2 I reviewed recently this gives much better battery life and with all it's features and display I found to be a better device! Like with the Veego 80 the Pagee has no Voltage boost but is not much of an issue using with the supplied coils, i noticed no drop off in power with the 1.0ohm coil and it was barely noticeable with the 0.6ohm!

We also have a Type C connection and 2A charge rate allowing the device to be charged in just 50mins while supporting pass-through and giving good charging feedback!


T7E1y2Y.jpg


_________________________________________________________________________



Likes

Very small "credit card" style device
Good job done with Carbon Fiber effect panels
Buttons protrude and are nice and clicky
Fire or Auto Draw
Manual Mode
Can still use Auto Draw when device is locked
Old school style display (see cons)
Simple device to navigate
Bottom adjustable airflow
4 digit puff counter that can be manually reset
Coils compatible with Feelin device
Both Coil heads gave outstanding flavour
Good visibility of e-liquid level
950mah battery (not so sure)
510 standard drip tip fitting (can use alternative)
Lanyard can be fitted (one included)
Type C USB, 2A charge rate
Good charging feedback given
Charges in 50 minutes
Supports pass-through


Cons

Airflow adjustment fiddly and not what's stated!
Can't get tighter MTL draws due to air leakage
Wattage only adjusts one way
Pod needs removing to fill
Cluttered display
No voltage boost


I would once again like to thank Agnes for supplying the Pagee for the purpose of this review, thanks for reading and stay safe!

https://www.nevoks.com/products/pagee/

_________________________________________________________________________

  • Locked
VOOPOO DORIC 60 POD MOD KIT review by hittman

It appears that manufacturers have been very busy designing and building new products as the review samples continue to roll in. Today I’m going to attempt to discuss the new Voopoo Doric 60 pod system. I read somewhere that the Doric 60 takes its inspiration from the pillars of the Roman pantheon. What I know for sure is that the Doric 60 has a 2500mah internal battery and has three output levels but no screen and only a single button to operate the unit. Included in the kit is the very familiar and well known PNP pod and coils that have been used on several Voopoo devices. It is nice when manufacturers make items compatible across several devices so the end user doesn’t have to start from scratch buying a new line of coils. Since the Doric 60 uses the PNP pod tank then the PNP MTL tank will work and the TPP and TPP X pod tanks should be compatible also.


Clipboard01.jpg


Clipboard02.jpg


WHAT’S IN THE BOX?

1* Doric 60 Device

1* PnP-Pod (4.5ml)

1* PnP-VM1, 0.3ohm

1* PnP-VM5, 0.2ohm

1* Type-C Cable

1* User Manual


Clipboard03.jpg


IMG-6811.jpg




SPECIFICATIONS:

Size: 26.55* 113.45mm
Material: metal & SK
Battery: built-in 2500mah battery
Output: 5-60W
Output voltage: 3.2-4.2V
Resistange range: 0.1-3.0ohm
Capacity: 4.5ml
Resistance: 0.2ohm(PnP-VM5, 40-60W)
0.3ohm(PnP-VM1, 32-40W)



Clipboard04.jpg


FEATURES:

1. Minimalist design, exquisite portable
2. Internal 2500mah battery, Type-C fast charging
3. GENE chip, 5-60W output
4. 3-color LED lights to show output
5. Innovative 360 degree infinite airflow system to switch DTL to MTL vaping
6. Auto or button modes
7. Magnet 4.5ml cartridge, bottom filling design
8. Compatible with all PNP coils
9. Output over-current protection
10. Over-discharge protection
11. Max power protection
12. Short-circuit protection
13. Overtime protection
14. Over-temperature protection
15. Overcharge protection

Clipboard05.jpg



INITIAL THOUGHTS:

The packaging of the Doric 60 is fairly minimalistic. The box opens from one end and the Doric 60 battery and PNP pod sit in a plastic tray that slides out. Underneath the tray is a box containing the USB-C charging cord and two PNP coils along with the user manual and a desiccant packet.

The two coils included in this kit are the VM-5 .2 ohm coil rated 40-60 watts and theVM-1 .3 ohm coil rated at 32-40 watts. I was thinking that the PNP pod tank is the first pod tank that I remember coming on the market even though many manufacturers have adopted a similar design. I may be wrong but was thinking that Voopoo was the first to come out with the pod tank design.

It seems like more and more companies are getting on the tube style mod wagon lately. The Doric 60 is Voopoo’s entry into that category. I think they are good for entry level users with the simplicity of operation due to only one button and no display.

The top of the battery portion contains a metal ring that the pod rests on and two gold plated spring loaded contacts to transfer power to the coil. Rather than have the airflow sensor in the middle like some other auto draw devices, this one has the airflow sensor offset so that it is less likely to get liquid inside if there is condensation or leaking. This may also be why the auto draw function only seems to work well in MTL with the airflow restricted and doesn’t seem to work well with DTL and open air. I’m honestly not surprised since I have had this same experience with other Voopoo products I’ve tested and feel like it is an issue that needs to be corrected. The auto draw on this one works a little bit better than some of their others that I’ve tried but if the airflow is open very much then you have to draw really hard to activate it.

upload_2021-9-26_10-41-35.png


Below the pod opening is the dual slotted airflow control. It turns 360 degrees and does not have a stop. There is also a single hole available on each side for those that choose to use the Doric in MTL mode.

Clipboard06.jpg


Below the airflow ring, there are three lights to indicate the “gear” that the output is in according to the color of the lights. The fire button is directly under the lights and protrudes a little which is nice since you can pick up the Doric and feel the button placement instead of having to look for it. There are three output modes which are High(White), Medium(Green), and Low(Blue). Near the bottom of the button side is the name DORIC etched into the surface. On the opposite side near the top is the USB-C charging port and the Voopoo name etched near the bottom. On the bottom surface of the battery is a rubberized ring to help it keep from slipping when sitting upright and a single vent hole.

The number of lights lit while the output is activated indicates the battery level as follows.

- Three lights 66-100%

- Two lights 30-65%

- One light <30%


upload_2021-9-26_10-43-41.png


upload_2021-9-26_10-44-0.png


upload_2021-9-26_10-44-17.png


Since there isn’t a display, the Doric 60 uses the lights above the button for notifications. The following are the indicator light instructions.

- Charging: The corresponding light flashes while actively charging and all three lights stay lit when completely charged

- In use: - Under normal working condition the corresponding indicator light will become gradually brighter

§ Low battery: The red indicator will flash 10 times

§ Short circuit: The light is steady red

§ Check atomizer: The indicator light flashes 8 times

§ Temp high: The indicator light flashes red 15 times


Clipboard07.jpg


Clipboard08.jpg


Clipboard09.jpg


Clipboard10.jpg


The pod tank that is included in the kit is the PNP tank that we have seen several times on other devices. The drip tip is not replaceable and the pod is bottom fill with a rubber plug and a decent sized fill hole. In the past I have gotten a decent amount of condensation and even a little leakage with some coils while using the PNP tank. I don’t know if something has changed but I’ve gotten very minor condensation and no leaking during my time testing the Doric 60 with the PNP tank.

I won’t go into great detail on the PNP tank since I think most people have either used one or seen one. I’ll just say that I’ve always gotten really good flavor using the PNP coils and prefer the .15, .2, and sometimes the .3 ohm coils.

upload_2021-9-26_10-48-20.png


upload_2021-9-26_10-48-36.png


upload_2021-9-26_10-48-53.png


upload_2021-9-26_10-49-10.png


111.jpg


222.jpg



FINAL THOUGHTS:

The Voopoo Doric 60 is a very simplistic designed tube mod with just enough functions and features in my opinion to make a good pocket carry on the go device.

Being compatible not only with the PNP tank and series of coils but also being able to use the MTL pod makes it useable for an entire array of vapers. That along with the quick change airflow control going from DTL to MTL makes the user experience easier. Also changing the output range according to coil resistance using the Gene chip is a nice feature as well as being able to choose between one of three output levels.

I do like that the Doric 60 offers both auto draw and button activation but once again feel like the auto draw function could work better when the airflow control is more open for RDL and DTL. I’m not really a big fan of auto draw anyway so the operation didn’t have much effect on me since I prefer using the fire button. That being said, if it’s going to be advertised as a feature then it should work well. One other thing I found to be odd was when button firing it seems to have about a 5 second cut off but not when using auto draw.

Overall I’ve enjoyed testing the Voopoo Doric 60 that was sent to me for this review. So would I recommend it? If you are looking for a medium sized pocket carry tube mod that delivers pretty good flavor and is simple and easy to use then yes.

I’d like thank Voopoo and Aimer for sending the Doric 60 kit for this review and a big thanks to the readers. Below is a link to the Voopoo website product page.

VOOPOO VAPE Spark Your Moments


  • Locked
New Product! Justfog Minifit-S Pod Kit 420mAh

Justfog Minifit-S Pod System Kit is an incredibly tiny portable pod device consisting of a battery and a mini pod ungraded by original Minifit.It is made from pc and aluminum with a clean matte finish and is durable for its’ size. The sleek fire button is wide at the top then slims down flush in the middle of the tiny device.

The MINIFIT-S has a built in 420mAh Li-ion battery.The battery has a consistent voltage output function that will stay at a constant 3.4v despite battery charge level.MAX Output 12watt wattage, The MINIFIT-S device has a three level light battery indicator to let you know how much charge your battery has left when you press the fire button. Three LEDs will light up when the battery is at 100% to 70%, two will remain lit from 70% to 30% and one indicates 30% battery life is remaining.



Pod Capacity: 1.9ml
Resistance: 0.8ohm
Material: PC, Flax, Fe-Cr-AI
Pod Dimensions: 21.5*14.7*30.6mm
Battery Capacity: 420mAh
Constant Wattage: 12W
Charging: C-type USB, DC 5V
Material: PC, Anodized Aluminium
Battery Dimensions: 21.5*15.6*54.4mm
...

Click here for more:

Justfog Minifit-S Kit: Justfog Minifit-S Pod Kit

  • Locked
Hellvape Wirice Launcher Mini Tank Clearomizer

Authentic-Hellvape-Wirice-Launcher-Mini-Tank-Clearomizer-3FVAPE.jpg



The Hellvape Wirice Launcher Mini Tank Clearomizer is the most innovative for 2021, produced by well known manufacturer Hellvape, for Wirice.


The Launcher Mini Tank is a total game changer, with the innovative TLC System ( Top Loading Coil), installation and removal of the coil is easier than ever, even with a full tank of juice!


The Hellvape Wirice Launcher Mini Tank has 3ml e-liquid capacity and features top filling system. What's more, with the top loading coil system, it can lock the e-liquid holes automatically, so it is leakproof in any case, you don't need to worry about any leakage. Utilizing the new T3 series coil, Launcher Mini Tank will provide you amazing MTL vaping and extreme flavor. Launchar Mini Tank features adjustable bottom airflow system. Targeted to an MTL experience, Launcher Mini Tank signatures 3.0mL capacity, 5ml extra bulb glass tube for an even more impressive flavor. And there are 5 adjustable air inlets for you to select: Φ0.8mm, Φ1.0mm, Φ1.2mm, Φ1.5mm, 1.7*6.2mm.


The Wirice Launcher Mini utilizes the unique top-loading coil system for easy to use and sanitary. Rotate the drip tip base, and directly put your coil into the tank from the top of the tank, tighten the drip tip base clockwise for the end. Instead of replacing the coil via the bottom, these awesome steps that remove coils even with a full tank not only fairly decrease the potential of liquid leak-proof, but also increase the contact area for the T3-01 and T3-02 coils, on the other hand, it efficiently increases the heating speed and performance. It will be widely acclaimed for the Knurled grip, acting to remove the top cap and refill easily. The airflow is adjustable depending on the preference of the vapor, contributing to accurately control the airflow for a pure vapor. One pain point is meticulously considered for adding a 510 thread, making it durable to weather the wear and tear.


Features:
510 threading connection
Capacity: 3.0ml / 5.0ml (extra bulb glass tube)
Body Material: SUS304
Glass Material: Pyrex Glass & PCTG
Top Loading Coil System
Remove Coils Even with Full Tank
Decrease The potential Of Liquid Leak-proof
T3-01 0.7ohm KA1 Meshed Coil and T3-02 1.2ohm KA1 Coil
Increase the Heating Speed and Performance
MTL Experience
Knurled Grip
Adjustable Airflow
Diameter: 23mm


More details for the Launder Mini, please check >> https://www.3fvape.com/52449-hellvape-wirice-launcher-mini-tank.html

  • Locked
The Latest Lost Vape Cyborg Quest Box Mod 100W

The authentic Lost Vape Cyborg Quest 100W TC VW Vape Box Mod comes with special-shaped look to show your personality. Lostvape Cyborg Quest 100W Vape box mod is powered by single 21700 / 20700 / 18650 battery (not included) with Type-C fast charging and can fires up to 100W output.
lost-vape-cyborg-quest-mod2_(1).jpg

Lost Vape Cyborg Quest features Quest 2.0 chip with 5 modes: wattage mode / VPC Mode / Bypass Mode / Voltage and 3 User Records (Normal coil, TC coil and RBA).Please go to vape shops near me to learn more details.

Lost Vape Cyborg Quest Box Mod SPECIFICATION
Input Voltage:5V
Battery:21700/20700/18650 Single Lithium Battery (Not Included)
Battery Voltage:3.0V-4.2V
Output Voltage:0.7V-8V
Power Range:5-100W
Current Range:1A-35A
Temperature Range:100°C-315°C/ 200°F-600°F
Screen Pixel:96 “ 80*160
Body Material:Zinc-Alloy

Quick Link:Lost Vape Cyborg Quest Box Mod 100W

  • Locked
Sourcemore 7th Anniversary Sale




Sourcemore 7th Anniversary Sale

*5 Rounds Flash Sale from $0.01 (Sept. 26 - Sept. 30):

VOOPOO Doric 60 Kit
Vapefly Brunhilde MTL RTA
Vaporesso XROS 2 Kit
Uwell Caliburn A2 Kit
SMOK Nord 50W Kit


*Lucky Wheel Prizes:
Points
Free Orders
Free SMOK Morph S Pod-80 Kits


*Big Giveaways Prizes:
VOOPOO Doric 20 Kit
Vapefly Brunhilde SBS 100W Kit
Vaporesso Target 80 Kit
Uwell Caliburn AK2 Kit
SMOK Morph Pod-80 Kit
(3 winners for each product)

*Coupons:
10% OFF SITEWIDE Coupon: 7TH10
(Sale page, clearance and weekly deal items excluded)
Bronze Level Exclusive 5% OFF Coupon: 7TH5
(Must log in, sale page, clearance and special discounted items excluded)


Sale time: Sept. 26 - Oct. 7
Holiday Time: Oct. 1st - Oct. 7th, GMT+08:00
(Shipment and reply to messages will be delayed during our holiday)

Enter here<<<Sourcemore 7th Anniversary Sale

Filter