eVic-VTC Mini - Joyetech

Does anyone know where it's possible to still purchase these mods?
I won mine here on ECF 7 years ago and is still my favorite mod. It's still going but cannot last forever and I would like another.

I initially didn't intend to quit entirely, just slow down smoking. It's been about two weeks, and it's like every day I've wanted cigarettes less and less. I only had 1 today, and I didn't even really enjoy it too much. I've been using 3mg juice, cause I like to just smoke it a lot and I didn't want to go over on nicotine. Now it's like I'm not even craving cigarettes. I can't believe it really worked. I was really skeptical. It just happened tho. I hope this trend continues. Have to say, I like fruity sweet flavors way better than my rolled tobacco. Proof, it ain't "for kids" bull..... That's like saying adults don't eat candy. The people trying to get vape juice pulled can shove it!!!!

I wanna add too, and I'll try to keep track of this with time, when I pick up my vape, it doesn't feel the same as when I'd wanna go smoke a cigarette. Sometimes I can only take like 4 puffs and I gotta put it back down cause I'm working. It's more often, but I believe I'm I taking a lot less nicotine. Cause when I first started, I still had to smoke cigarettes. As my cravings for nicotine got less cause the smoking slowed down... It seems to have gradually went away.

Biggest one was also after meals... That seems to be gone now. And with my vape, it's not nagging at me to go pick it up after I eat. I feel like I can just vape at my leisure.

I just can't do sub ohm so listing to see if there is any interest in this lot. These are all new and sealed except one box of the Sense Cyclone coils which I opened to check (none were used, just not in a sealed wrapper like the others).

---4 Innokin Axiom mini, sub ohm tanks
---6 Sense Cyclone tanks
---8 boxes of Sense Cyclone Coils, 0.6 ohm, 50 to 100w. There are 8 boxes with 5 packs, 5 coils per pack for a total of 200 coils
---1 Smok TFv4 mini tank

$110 includes shipping and tracking. CONUS only, Paypal with no mention of vape or ecigs and F&F. If you don't want to do F&F, add $5.

For sale are two Fat Rabbit RTAs. This is the dual coil version. One is stainless steel, the other is matte full black.

Used but in good condition. Each includes the original product box, spare glass, pouch of spares (o-rings, grub screws) and pouch with the coil cutting guide and screwdriver.

$25 each shipped via First Class Mail with tracking (insurance available at additional cost)
$45 for both shipped Priority Mail with tracking and insurance

Payment by PayPal F&F with no mention of e-cigs, vaping, ECF, etc.

So over the last three weeks I decided to build all my favorite RTAs with the same coil and the use the same juice.
The coil is a clapton .70
The juice is orchard blends (by five pawns) pinapple kiwi

The tanks in order of my preference ...
1. Taifun GT 111 - This has only one drawback - it is very large. It is also a loose MTL which I prefer) but you can set it tighter with a very easy to adjust AFC. It also has juice control which is easy to set. It is 22mm and holds 5ml of e-juice so it really tall. Looks best on a SBS but I have it on my Neo for laughs. Flavor is just on point. No leaks. No dry hits if you don't stuff with cotton. Less is more.

2. Kayfun Lite 2022 - They improved the tank with this iteration. It is now much much easier to refill as the bottom comes off without a struggle. The air flow is adjusted through the 510 pin which means you cannot easily adjust it when on the go (you need a screwdriver and you need to remove the tank from the mod. Also it only holds 2ml and is bottom fill. But the flavor - as good as the GT 111. Alaso no leaks. No dry hits.

3. Kayfun Prime - I have the DLC version. So pretty. Although it is slightly taller than the Lite it still holds only 2ml. But like the above two attys it is 22mm which I really like. And its top fill. And it is pretty easy adjusting the AFC. I am not as fond as the juice control system as you need to spin the tank but it works and it does not leak. Flavor is quite good - it's a Kayfun after all.

4. Steampipes Cabeo - This is a strange one. Its an RDTA like no other. There is no cotton going down into the tank. No mesh wires. It works by capillary action but amazingly it works. This tank is 23.5mm and holds over 5ml of juice. Fairly easy to fill too and I got no leaks and surprisingly no dry hits. It is again a large tank. And the flavor is not quite as good as the preceding attys. But still I'm fond of this tank.

5. Squape A(rise) - Not the first Squape I've owned but by far the best for juice control and filling. Again no leaks and it is top fill. A big tank - 24mm with a 4ml capacity. It has excellent flavor and both juice control and AFC are combined on the same ring. The airier it is the more open the juice control. But it works.

6. Taifun One - This is a pain in the .... to fill. Does not leak and I never use juice control. There is minor adjustments you can do to the AFC. This is the worst type of bottom fill. You really need needle point bottle to fill but flavor is very good.

The there are the few tanks I never use much. I do like the Dvarw 22 mm. It leaks it is bottom fill (unless you buy accross vape top fill accesory (which I have) and it is set air flow. Not a fan. I used to use my Bishop and Pioneer too but the other tanks I own above are simply better although both Bishop and Pioneer for the price are certainly worth the cost. I'm just spoiled.

Now happy to hear what you guys have for prefered MTL vape.

The YiHi and SXMINI G-Class V2 is the long awaited overhaul of the very popular G Class that was released half a decade ago. With an all new board, chip and screen, a new way of doing temp control and a new way of running an "app", will the G2 hold up the trophy the original held?

YiHi and SXMINI G-Class V2 - CHAPTERS

00:00 - Intro and specs
04:00 - Close up
35:00 - Temp Control & Wattage Vape
38:00 - Thoughts


Login to view embedded media

As the title says I'm looking to try a squonk now.

I will never figure out how insurance companies work, same exact coverage for the same vehicle. Why the heck are the prices so different? I think I should call around every year and shop for the best price. It is just insane. The word scam comes to mind.

Originally I was just trying to find trades of various different mods and kits for a dual 2X700 but now I'm going to also put some prices up for each of the mods and kits in case if anyone wants to purchase one of them. If anyone wishes to have further detailed photos or more description of any of the items I'm happy to give that to you. There is an assortment of regulated unregulated and even a mechanical mod there are a couple squonkers And even a mod that allows you to go in the series and parallel batteries. Speaking of batteries I have mostly external battery but a couple internal battery.

Plus $6 for standard first class shipping with tracking per order not item. So if you buy one item shipping $6 if you buy four items same.
USA only (sorry) PayPal
My first available day for shipping is Thursday the 7th April unless I can figure out how to do at home shipping.

If a couple things catch your eye let me know we can probably work something out.


Squonkers:
Drip Box 160 squonk kit (used condition some scratches) $25
Pico Squeeze 2 kit (used) $30
Coil Art Azeroth (unreg/mech) unused $20

Mods/ Kits:
OBS Cube X mod (few small scratches) $20
Nunchaku 1 RDA kit (used a couple times) $30

Unregulated Mod w Series Para batts:
Wismec Luxotic NC (noisy cricket) It does have a MOSFET but I still wouldn't say this is a beginner or moderate mod. $30

Tiny mods and pods:
Vinci Pod Kit 15w unused but unsealed $15
COV Mini volt (good condition) $18
IJoy Diamond VPC kit 45w (used 3 times) This mod has a 510 It's tiny It's adapter allows the use for juul pods and a couple others It's neat and cute. Also has three extra pods to go along with it $25

Hello and thank you for joining me today for this review on a fairly new product made by a company named VINS. They offer two products that are both pod mods called the 24K and 18K. Both units have a 5-30 watt output range with a 1000mah battery capacity. The 24K is gold colored and the 18K is silver colored. The body of each mod is made of zinc alloy and with the square shape of the mod it really reminds me of a small mod that I used years ago but can’t quite remember the name. I think it was a VV3 or something like that. I thought with the shiny exteriors that they would be fingerprint magnets but they aren’t. So without further rambling, let me show you some pictures and I’ll give my opinions on these devices.




WHAT’S IN THE BOX?

1 x VINS 24K Device

1 x Refillable pod (Mesh Coil 0.8Ω)

1 x Refillable pod (Mesh Coil 1.0Ω)

1 x Antibacterial Drip Tip

1 x User Manual



SPECIFICATIONS:

Size: 19*19*123.5mm

Capacity: 2ml

Resistance: 0.8/1.0Ω

Battery: 1000mAh

Color: Gold or Silver



FEATURES:

1. Built-in 0.8/1.0ohm Coil for DTL/MTL vaping

2. 1000mAh built-in battery, output power 5-30W

3. Bacteriostatic material 510 Drip Tip, 99.9% healthy protection

4. Zinc Alloy material, elegant and worthy












INITIAL THOUGHTS:

Vins was nice enough to send not only one each of the 24K and 18K pod kits but also included a spare two package of each of the .8 and 1.0 ohm pods, while one of each is included in the kit, and two bottles of e liquid. The flavors that were sent were Mint and Godfather. The Mint was just too strong on the menthol for me. I did make it through about half of a pod before I gave up and filled another pod with my own DIY liquid. The Godfather is a really nice tobacco flavor with a somewhat strong throat hit which is no surprise at 40mg strength. The Mint is 30mg but way too much menthol for me. I have noticed in several menthol flavors that I’ve tried in this one and in prefilled pods that I seem to pick up on a grapefruit or guava taste ever so lightly. I did think it was odd that there was not a charging cable included in the kits I received.



The packaging of the Vins kits is nice. On the front is Godfather’s Choice along with 24K and the VINS name in gold lettering or 18K with the same in silver lettering depending on the kit. On the back of the box is the statement “The Godfather of the E-cigarette industry”. Also on the back is a list of the contents, specifications, and company information for the Vins company.



Both mods came with the battery unit, one of each resistance pod, an anti-bacterial drip tip, and a nice detailed user manual that contained various languages. The mod itself has minimal branding which I like. Near the bottom it has the VINS name along with either 24K or 18K depending on which you have. Near the center of the face is a single fire/adjustment button. This button can be used to fire the mod or the mod can be auto fired thanks to the very well working airflow sensor. This button is also used to adjust the wattage. Above the wattage button is the display screen that shows the following information.

- Set wattage

- Lock indicator

- Battery indicator

- Coil resistance

- Puff counter



The back of the mod has a single airflow opening near the top of the unit with a USB-C charging port in the center. I like that the port was placed here rather than the bottom of the mod like many pod devices have. The zinc alloy frame gives it good weight and the square shape with a flat bottom makes it stable to stand up on a flat surface. I do wish though that they could have designed an adjustable airflow control into the body or pod. This is something that I like to see in pod devices.

The Vins have a 100mah battery which is totally acceptable for a device of this size and seems to last a very good amount of time with the 1.0 ohm pod and just a little less with the .8 ohm pod. The coils themselves are not replaceable so the entire pod needs to be changed when necessary.

The pod opening on the mod has of course two gold plated electrical contacts as well as four strong magnets. Once the pod is partially inserted then the magnets are strong enough to pull it in the rest of the way and the pod stays in place very securely. Also in the center of the opening, the raised airflow sensor for the auto draw function can be seen.








The operation of the Vins devices seemed a little over complicated to me for a simple pod device but I understand that this is because they have chosen to include a display and some functions that not all pod devices have included. The functions are as follows.

- Press the button 5X to turn the device on/off

- To reset the puff counter, remove the pod and hold the button for 5 seconds

- To lock the wattage, press the button 3X in 1.5 seconds to lock the fire button and the lock symbol will show on the display. While this is locked you cannot use the fire button to operate the output and can only use auto draw

- The manual says to press the button to adjust the wattage but I have to press the fire button three times first and then can press the button to adjust the wattage



The mods also have some safety protections which include

- High temperature protection

- No atomizer

- Output short circuit protection

- Vaping timeout(4 second cutout)

- Low power protection



Although both devices are rated for a maximum of 30 watts, they use what I call a smart output mode where you are restricted to a wattage range depending on the resistance of the pod used. The 1.0 ohm pod restricts you to a range of 10-13 watts while the .8 ohm pod allows a range of 15-18 watts.


THE PODS

Each kit includes one of each resistance pod along with a bacteriostatic drip tip. I guess that means it’s antibacterial but honestly just looks like a stainless steel drip tip to me. It is comfortable to use though. It was a pleasant surprise when I opened the spare pods that Vins was nice enough to send with the samples and there was another drip tip already on the spare pod.

The pods are clearly marked with the resistance rating on one side. I like very much that the pods are clear PCTG and the liquid level can be easily seen not only due to the clear pod but also the design of the pod opening on the mod that allows the user to see the liquid level.

The pods are a side fill with a rubber fill port plug. The plug is rounded on one end and flat on the other end. To open the plug just pull up on the flat end and fill. I was able to fill with the bottles that I commonly use with no mess whatsoever.

The bottom of the pods have two fairly large electrical contacts along with the matching magnets that the mod has with one in each of the four corners. When you insert the pod into the mod it will only go in one way in order to align with the contacts.







FINAL THOUGHTS:

In my opinion both the 24K and 18K have an attractive appearance and to me give off a bit of an old school vibe. I think I mentioned earlier that I tried both of the bottles of e liquid that were sent with the samples. I put the Godfather tobacco liquid in the 24K with the 1.0 ohm pod. That pod gives a really nice semi restrictive MTL vape. I found the flavor production with that liquid really very good. However, at 30mg strength which I haven’t used in a long time it did cause me to cough occasionally. Being restricted to the 10-13 watt range for this pod seemed right to me. I did run it at 13 watts though. When you put a pod in for the first time it defaults to the lowest setting in the range. Since I couldn’t handle the strong menthol from the Mint e liquid that was sent, I instead filled one of the spare .8 ohm pods with an RY4 Cream recipe that I have used quite often. With this pod I kept feeling that I wanted a little more output but was restricted to the maximum of the range at 18 watts. I feel like this one could be pushed to 21 watts or so for a little more flavorful vape. At first I thought the flavor production was a little weak but after running a tank or a little more through it, the flavor improved. Overall, I’d probably give the flavor production a 7 out of 10. I felt like the .8 ohm pod was more of a restrictive direct lung vape than an actual direct lung experience. I didn’t mind though because I like RDL.

I do like that the Vins mods can be used with the fire button or in auto draw mode. The auto draw function worked very well during my testing. I liked the auto draw with the 1.0 ohm pod but preferred to button fire the .8 ohm pod due to that pod having noticeably more airflow. I do wish though that they had been able to incorporate an adjustable airflow into these pods. I think it would have made a noticeable improvement. I understand why they restrict the output levels since it would be good for beginners and have less chance of burning up the mesh coils in the pods but for an experienced user I think it would be nice to be able to bypass those limits and set the output where you want it to get a little warmer vape especially with the .8 ohm pod.

So, here we are at the end of yet another review. I’d like to thank Vins and Elena for sending the VINS 24K and 18K pod mods for this review. As always, thanks go out to the dedicated readers of my reviews. I do truly appreciate it. Below is a link to the Vins website if you’d like to take a look. I haven’t seen these on a lot of websites yet for sale but have seen one or two.


VINS (vinsvape.com)

BP MODS Sure RTA is a 22mm Atomizer designed specifically to offer a pure and satisfying MTL shot given by its small chamber and adjustable airflow.
It is made of stainless steel and polycarbonate, with a diameter of 22mm.
Capacity of 2.4ml/3.8ml/6ml with the small cap both with bottom refill.
Air flow adjustment through the 7 of 510 pins included in the package



Tease-Out & BP Mods Presented
Suitable For MTL/RDL/DL Vaping Styles
Made By Premium SS & PCTG
Two Color Versions : Polished SS & DLC Black
510 Drip Tip
22mm Diameter
43.3mm Overall Height With Standard Tank
34.7mm Overall Height With Extra Mini Tank
Standard Tank 3.8ml Volume
Extra Mini Tank 2.4ml Volume (With Silicone Plug)
Gravity Juice Guide Design
Quick Juice Guiding
Juice Tank Lock Design
...

Click here for more:

BP MODS Sure RTA: BP MODS Sure RTA 2.4ml/3.8ml/6ml

Updated 2022 New Coupons on Vapesourcing

Coupon Code: Scar18K
Coupon Price: $43.99
Discount: 22.81% off
Link: SMOK Scar-18 Kit 230W with TFV9 Tank

Coupon Code: NovoX
Coupon Price: $17.29
Discount: 24.79% off
Link: SMOK Novo X Pod System Kit 25W

Coupon Code: AirM
Coupon Price: $25.59
Discount: 22.43% off
Link: Suorin Air Mod 40W Pod Kit

Coupon Code: BARRDA
Coupon Price: $6.99
Discount: 30.03% off
Link: Geekvape BARON RDA 24mm

Coupon Code: Cyborg
Coupon Price: $27.99
Discount: 34.89% off
Link: Lost Vape Cyborg Quest Box Mod 100W

Coupon Code: CyborgK
Coupon Price: $32.99
Discount: 34.01% off
Link: Lost Vape Cyborg Quest Pod Mod Kit With UB Pro Pod Tank 100W

Coupon Code: VINCIQ
Coupon Price: $7.59
Discount: 30.94% off
Link: VOOPOO VINCI Q Pod System Kit

Coupon Code: VVINCI
Coupon Price: $15.59
Discount: 32.19% off
Link: VOOPOO VINCI Pod System Kit Royal Edition

Check out the Uwell Kalmia Pod System, featuring an integrated 400mAh battery, 1.6mL refillable pod, and operates on a draw-activated firing mechanism.

Constructed from durable PC+ABS Materials, the Uwell Kalmia Kit is slim and portable, neatly fitting within the pocket, purse, or bookbag with ease. Adopting a 1.6mL refillable pod, the Kalmia relies on an integrated 1.2ohm coil to deliver outstanding flavor and vapor from your favorite eJuice or nicotine salt.

Operating off a draw-activated firing mechanism, the Kalmia is free of buttons and screen to ensure maximum battery life and to maintain the sleek and uninterrupted exterior.

Go to vape store near me to make an order.

You may also like:

voopoo argus gt 2 kit in stock
smok rpm 5 kit online sale

Uwell Kalmia Pod System Kit

Kalmia Kit comes with 400mAh battery capacity with 13W max power. It is paired with a 1.2ohm magnetic cartridge of 1.6ml capacity. The design of elegance and tightness gives Kalmia charming appearance. It features air-activated auto draw, vibration interaction and type-c fast charging. The drip tip can fit your lip fully. Just get it to amazing vapaing experience!

Details:
1. Air-activated auto draw
2. Packed with magnetic cartridge
3. Fully lip-fit drip tip
4. Flower-shaped LED indicator
5. Vibration interaction
6. Type-c fast charging
7. Elegant and compact design
8. Patented PRO-FOCS technology
9. Solid magnetic connection



Aspire Flexus Blok Kit

Flexus Blok Kit is powered by a 1200mAh built-in battery to bring you satisfying all day vape. Equipped with the Aspire ASP chip, it can boost your vaping experience by offering 3-level power modes. Flexus Blok Kit also has dual activation modes for you to choose: auto draw and button triggered. With the precise airflow control, it can customize your vaping experience from MTL to RDTL. Flexus Blok features 3ml e-juice capacity, easy side filling system and top adjustable airflow. It is fit for Aspire AF (Aspire Flexus) Coil Series (AF Mesh 0.6Ω/1.0Ω Coil are included in the package).

Details:
1. Redefines palm sized vaping, elegant but mighty
2. Built-in 1200mAh battery for all day vape
3. Equipped with Aspire ASP Chip, 3-level wattage settings
4. Dual activation modes: auto draw & button triggered
5. 3ml e-juice capacity, easy side filling, top adjustable airflow
6. Precise top adjustable airflow, from MTL to RDTL
7. Fit for Aspire AF (Aspire Flexus) Coil Series
8. Vaping over-time/overdischarge/overcharge/short circuit/overheat/low voltage protection

Here comes a new pod system from Uwell - Kalmia, which brings you a new look. Will it start a new series like Caliburn? What are the differences compared to Caliburn series? Let's take a closer look now.



Main Features:
1. Ingenious gradients and flower-shaped LED indicator to attract your attention at a glance
2. Translucent Cartridge to easily monitor the usage of e-liquid
3. Built-in 1.2ohm Coil, with PRO-FOCS Technology for best flavor
4. Auto-draw activate, friendly to users

Uwell Kalmia vs Caliburn A2 vs Caliburn G2

Which product do you prefer? Please leave your comment down below.

Learn More:
Uwell Kalmia

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall Now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail and then enjoy better price of more latest vape kits.

And for any inquires of Uwell wholesale or any vape wholesale in China, feel free to contact ElegoMall.

The internal battery capacity of Novo4 mini is 900mAh. The maximum power is 20W, using LP1 coil. ⁣
Perfect for your e-cigarette needs!

Maxus Solo 100W Kit with the mood lighting design is the first vape device adopting industry-leading FM COILTECH5.0, a brand-new mesh technology that pioneers the use of innovative parallel mesh structure and has outstanding performance in restoring the original flavors and creating huge clouds. For the first time, you can enjoy 100% original sub-ohm vaping with the world’s first parallel single mesh coil.



Freeemax Maxus Solo 100W adopts the latest industry-leading FM COILTECH5.0, also known as Double-D Mesh to offer users the best-vaping experience, which is the most outstanding feature of this Maxus Solo 100W. Do you want to know more features of the Maxus Solo 100W Kit?

Here are the main features of the Maxus Solo 100W Kit below:

1. FM COILTECH5.0/Double-D Mesh, Ultimate Mesh Technology from Freemax!
2. FL Platform, Unprecedented Leap in Flavors and Clouds
3. Mod with Novel Mood Lighting, Vape with Fun, and Fashion
4. Top Fill Design, ISO 8317 Child Resistant Certified
5. Detachable Structure, Convenient to Use and Clean
6.1.06-inch OLED Screen - Visualize Your Vaping Information
7. Multiple Output Modes - Beyond Your Imagination
8. FMOS 3.0, Waiting for You to Explore
9. Three Battery Options, Meet Your Diverse Needs
10. Slide Switch or Click Fire Button, Up to You
11. FM CHIP 3.0, All-round Protections

Creating a disposable vape at the highest of quality, the Hyde Disposable Vape presents a device with all of the greatest traits to deliver the best vaping experience yet. It is a large brand of disposables with several collections beneath its wings, including the Hyde Rebel, Icon, Retro, and N-Bar, among more.

I am selling a Dicodes Dani Box V2. Very good pre-owned condition, with the usual wear showing around the 510 connector and bottom. These are currently selling new on the Dicodes USA site for $295.00... Selling for the first $175.00 (NOW $150.00!) Shipped USPS Priority Mail / Tracking (USA Only).. PayPal F&F transaction please Shoot me a PM if interested.

Features

• 80 watts of power
• 0.05 – 5 ohm capable
• OLED display (15mm x 11mm)
• Powered by a single 18650 (not included)
• Spring-loaded center pin
• 510 pin material. (CuBe, Copper Beryllium (harder than steel)
• Temperature controlled vaping mode with programs for various wire-types
• Optimized for Dicodes resistance wire RESISTHERM
• Reverse battery protection
• Versatile and easy to navigate menu structure
• Individual user preferences selection
• Available colors Black, Titan (dark grey), Blue, Violet, Green or Red
• 2 Year Warranty
• Made in Germany
• Dicodes Part-No: Dani Box

High Tech German Engineering at its finest.


The UPDATED Dani Box V2 80Watt (18650) temperature control mod is now even more powerful, ergonomically designed to fit perfectly in your hand. It includes updated firmware for wire type for SS316L and a wider range of wire coefficients, the menu offers (4) different operating modes, allowing the user to switch between variable watt, variable watt with heat protection (10 options), variable watt with power boost (10 options), Bypass mode (power limited by output current <20A), or the (very) accurate variable temperature mode (when using a temp-control wire type.)


The body is made from anodized aluminum, available in (4) different colors with a brushed stainless steel top & bottom cap. It features a top mounted OLED display and a three button operation to easily scroll through the menu with one hand for selecting the desired program. For a mod packed with so many features, it is an easy menu to navigate.


The Dani Box V2 is precision engineered in Germany for performance and safety, backed by a two-year warranty on the electronics*


“DICODES. There is no substitute, why settle for anything less!”

(Listed on another forum under my 'same-but-different' user name TechnoMania)

The YiHi & SXMini SL Class V2 is a full overhaul of basically everything compared to the original SL Class released almost half a decade ago.

YiHi & SXMini SL Class V2 - CHAPTERS

00:00 - Intro and specs
03:00 - Close up
16:00 - Temp Control & Wattage Vape
18:00 - Thoughts


Login to view embedded media

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This is a great cell, performing better than the 35E and is essentially equal to the Molicel M35A and performs a touch better than the EVE 33V. The 35E3 has a “3” on the wrap, on the lower left corner of the printing. If there is no “3” then it is the older 35E.

Samsung rates this cell at 8A continuous and 13A non-continuous as long as you keep it under 60°C. As I do for all the over-3000mAh 18650’s I recommend not going over about 5A to improve performance (minimize voltage sag) and help extend cell life. Do not go below 2.65V with this cell.

The two cells I tested delivered 3458mAh and 3466mAh. This is great consistency and is typical for cells from the big manufacturers.

Two cells were purchased for testing by me from 18650BatteryStore (18650 Battery Store - Lithium Ion Batteries, Chargers and Accessories).


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum