The Hippovape B'adapt Pro 100W SBS Side by side Box Mod is powered by single 21700 / 18650 / 20700 battery (not included) with type-C charging and can fire up to 100W output.

The Hippovape B'adapt Pro 100W Mod is equipped with 0.96 inch LCD display screen to show vaping data clearly. And Hippovape B'adapt Pro supports Watt Mode / Volt mode / Temp mode / Bypass mode to meet different needs.

Hippovape B'adapt pro 100W SBS mod is a mod cooperated by VSS Project and Hippovape

Features:
Size: 28 x 52 x 81mm
510 threading connection
Battery: Powered by 1 x 21700 / 18650 / 20700 battery (Not included)
Wattage range: 1~100W
Modes: Watt Mode / Volt mode / Temp mode / Bypass mode
Voltage range: 0.5~8.0V
Temperature range: 100~315'C / 200~600'F
0.96 inch LCD display screen
Type-C charge port
Multiple safety protections
8S Overtime protection
battery low protection
Overheating protection
High/Low ohm protection
Short circuit protection

More details for this Side by Side mod, please check >> https://www.3fvape.com/51917-hippovape-b-adapt-pro-100w.html

Hello,guys.Aspire launched the new Nautilus Nano MTL Tank 2ml.It said that can provide you the dense cloud.

Aspire Nautilus Nano Tank SPECIFICATION

Body Material:Aluminum alloy
Supported Resistance Range:0.5-3.0Ω
E-juice Capacity:2ml
Airflow:Bottom adjustable airflow
Filling System:Top filling
Tank Dimension:φ19*56.7mm (Include the drip tip)
Coil Resistance:Nautilus mesh coil 1.0 ohm, Nautilus BVC coil 1.8 ohm

Aspire Nautilus Nano MTL Tank in stock, made of Aluminum alloy, comes with 2ml capacity with convenient top filling design. Aspire Nautilus Nano Tank features bottom adjustable airflow to offer impressive flavor. Nautilus Nano Tank is compatible with Nautilus coils.

Please go to vapesourcing.com to buy.

You may also like:

geek bar flavors
suorin air mod 40w

BP Mods is now going into the BORO world and today we bring the new Pioneer Insider RBA for Billet Box by BP Mods, which can do both MTL and DL vaping with your billet box and boro tank compatible devices.


The BP Mods Pionner Insider MTL / DL RBA for BB is a tank that can be compatible with Boro (Billet Box) tanks, such as Billet Box, Sunbox Zero Naga or SXK Supbox. BP Mods Pioneer Insider for BBis an affordable premium tank that can be used as both MTL and tight DL and will be transferred to Billet. The full set of pioneer insider comes with multi-option for airflow by changing the afc pins, which can match your demand better for MTL and DL vaping.





2 Post design building deck, the Pioneer insider RBA is a easy building RBA for you to DIY your own single coil on your billet box.






Features of BB Version Pioneer Insider


Full Set Pioneer Insider (with 0.8mm Airflow Pin)
Chimney Adapter for Standard Boro Tank
510 Adapter
Single Wire#1 Coil, 0.7ohm (Ni70 26 Ga, Diameter 2.5mm)
Clapton #3 Coil, 0.35ohm (A1 26Ga x 2 + Ni80 40Ga, 42.5mm)
Compressed Cotton Pieces
VMQ Airflow Passage
M2.5 x 2.5 x 0.45 Post Screws
PEEK Airflow Pin Insulator
VMQ 23.8 x 14.1 x 2.05 Gasket
VMQ 11.5 x 1mm O-Rings
VMQ 11.5 x 1.5mm O-Rings
VMQ 6 x 1mm O-Rings
Airflow Pins (1.0 / 1.2 / 1.5 / 2.0 / 2.5 / 3.0 / 3.5mm with 8 x 1mm O-Rings
Supports both MTL and tight DL vaping


More details for this billet box accessory, please check >> https://www.3fvape.com/51919-bp-mods-pioneer-insider-mtl-dl-rba-tank-for-bb.html

Hello again and welcome back for today's review of the Marvos S Kit from Freemax. The Marvos S is the newest evolution in the Marvos lineup and I think the best looking as well. This is a single 18650 device with a power range of 5-80 watts, and offering 3 power modes being POWER, SMART and BYPASS. The kit includes the Marvos DL Pod but instead of connecting directly to the device magnetically as past Marvos did it now connects magnetically to a adaptor that screws into a 510 connection of the device. With the 510 connection you now have a choice to use other tanks on this device. Without further hesitation lets check this kit out.





COLOR CHOICES





INCLUDED WITH THE KIT





SPECIFICATIONS





FEATURES





ZINC ALLOY AND LEATHER





REPLACEABLE 18650, TYPE-C 2A FAST CHARGING





THREE POWER OUTPUT MODES - ( SMART, POWER, BYPASS )





0.96 INCH COLOR DISPLAY SCREEN WITH 5 COLOR CHOICES





510 ADAPTER





ANTI SPITBACK 810 ( REPLACEABLE DRIP TIP )





DUAL AIRFLOW SLOTS





MS PLATFORM OF PODS/TANKS





MS COIL SPECIFICATIONS





UNBOXING AND FIRST IMPRESSIONS


The packaging of the Marvos S Kit is done as most company's do with a inner box that slides out of a outer sleeve, inside the box the Marvos S rest in a foam cutout with the pod and 510 adapter already installed om the device. Under the device are your extra coil ( 0.25Ω ) charge cord, user manual, warning card, first batch card and warranty card. The 0.15Ω coil is shipped out pre-installed in the pod.

The moment I saw the device I started to smile, this is a really attractive device blending leather and metal for a very classy appearance. The Marvos S has a 510 connection on one side of the top plate above the fire/power button.

The other side of the top plate is where the battery is installed under a silver battery cap, with no battery installed the cap is super smooth, once a battery is installed the cap feels a little gritty when turning, no big deal I just want to point it out.

I really thought the device would have a lot of heft to it but at 156.43g it's fairly lightweight. Freemax did a great job on the imitation leather, it feels real and is very soft with some cushioning to it.





The kit consists of 3 major components- Mod, 510Adapter, Pod/Tank that I have laid out minus the replaceable drip tip, I used the stock drip tip while testing this kit finding no need to put one of my own on because it works fine and is comfortable to use.

I also like that it matches the pod/tank and speaking of matching having the knurling of the 510 adapter and battery cap really dress this kit up. The 510 adapter has the name Freemax stamped on it and is only 1 of 2 locations of the whole kit with the Freemax name on it while the name of the device is embossed in the leather next to the display screen. Branding was kept to a minimum.





With the pod/tank laid down on it's side showing the 4 magnets that connect inside the 510 adapter that's already connected to the Marvos S laying on it's side with the battery cap screwed on, the fill port of the pod/tank is on the bottom with a plug that has Freemax stamped on it.





The bottom plate of the device has 3 ventilation holes in case a battery problem occurs, the plate sits flat with no wobble on any flat surface. Freemax is stamped on the plate and it's the only spot on the device that has the Freemax name keeping a very clean classy look to the device itself.





The 510 pin is spring loaded with a nice throw of travel to it in case one wanted to use different atomizers on it, most 25mm atomizers with bubble glass will fit easily but 26mm with bubble glass is iffy depending on the atomizer. When any atomizer is connected there is a small gap between the top plate and atomizer base but not very noticeable.

Correct battery polarity is clearly marked with a red plus symbol inside the battery tube but there is no marking of minus on the battery cap though.





Having a large fire/power button on a device of this size is a big plus making it easy to find/feel when beginning your vape and the Marvos S has a nice sized button on the unwrapped side of the device at the top.

I can fire the device very comfortably using my finger, thumb or the upper palm of my hand, every firing position works very well and the hand fit is great ergonomically speaking. Connection of the charge cord is below the fire/power button at the bottom.





Turning the device around to it's backside shows the full wrap of leather with nothing stamped or embossed on it, I know little branding leaves a clean look but I this side looks a little empty, I wish Marvos S was embossed on this side as well. ( JUST MY THOUGHTS ).





I was sent the GUNMETAL/YELLOW version and I think the leather color next to the matt gunmetal body color work well together I'm very glad the gunmetal was done in a matt finish avoiding fingerprints that would have tarnished the appearance. As I mentioned earlier having the knurling of the 510 adapter and battery cap match shows freemax really took the time and got it right when designing this kit.

Even the front of the device leaves a minimalistic appearance that works by having a nice sized display screen with correct sized adjustment buttons under it.





For those of you that have the other versions in the Marvos line all of the pod/tanks will work on the 510 adapter including the optional glass pod/tank as shown below.





For those of you wishing to use your own 810 drip tip instead of the supplied stock one I threw on a black drip tip with a nice silver bezel at the bottom to show you how well another 810 drip tip would look.





I saved the best for last, the 0.96 inch display screen as seen above is a very vivid one having fonts that are easily readable with your information laid out well on the screen.

There are 5 choices of a color screen and they are YELLOWISH BROWN, GREEN, RED, WHITE and BLUE.

There are 3 power modes on the Marvos S with 1 being a straight wattage mode called POWER that acts like any wattage device and can be adjusted using the adjustment buttons from 5-80 watts output.

The 2nd power mode is a BYPASS mode mode that basically works like a mechanical mod outputting power directly from the battery itself decreasing power output as the battery is depleted.

Freemax has a 3rd power mode called SMART mode that reads the coils resistance and sets the wattage at a minimum setting for the resistance of that coil and won't let you go over the safe wattage of the coil it has read preventing the user from burning out the coil.

The SMART mode not only works with Freemax coils but also works on your own builds or other coils from different vape company's. This feature is so good for a new vaper preventing him/she from burning out a coil prematurely, not only new vapers but veteran vapers benefit from smart mode as well.

Layout of the display screen is as follows ( left to right and top to bottom )

* Power Mode

* Battery Bar

* Wattage Selected

* Lock/Unlock symbol

* Volts

* Ohms

* Puff Counter

* Seconds Of Last Vape

* Color Choices


Having no real menu just a few button combinations makes this device so easy to navigate the options you have. Button combinations are listed below.

* On/Off - 5 Presses Of The Fire/Power Button

* Choosing Power Modes - 3 Quick Presses Of The Fire/Power Button

* Locking/Unlocking Adjustment Buttons - Press And Hold Plus/Minus Buttons Simultaneously

* Color Change - Press And Hold Fire/Power and Minus Buttons Simultaneously

* Clear Puff Counter - Press And Hold Fire/Power And Plus Buttons Simultaneously


PROS

* Attractive

* Ergonomic Hand Fit

* Replaceable 18650

* 5 Color Choices On The Display Screen

* Leather Wrap

* Matt Color Finish

* Great Freemax Flavor

* Type-C

* Large Fire/Power Button

* 510 Connection

* Smooth Airflow

* Replaceable Drip Tip


CONS

* Bottom Fill

* Threads Are A Bit Crunchy On The Battery Cap


USING THE MARVOS S


Having only 1 real con with this kit and that being the threads on the battery cap are a bit crunchy on the last few turns when screwing it on, the other being bottom fill that is a inconvenience more than a con.

This device really cradles the hand for a almost effortless vape, I don't even use the button anymore but rather use the large fire button like a fire bar and just squeeze to vape.

Freemax did their homework developing this kit giving us a 510 connection for use with other atomizers if one so chooses. I really like that the smart mode also works when using your own builds and other vape manufacturers coils pretty reasonably.

The attractive appearance of the leather being smooth and soft with a little bit of cushion to it blending with the matt gunmetal finish was a great mix of color and texture, heck even the 510 adapter and battery cap knurling match up perfectly.

Having a 0.96 inch screen to easily view your information on is great but having a choice of 5 colors to use on that display screen adds another bonus.

Having reviewed every device in the Marvos line and using the same pod/tank with every device I'm pretty familiar with it and I really like it's performance, airflow is super smooth and I have zero problems using the stock drip tip because of it's size as well as comfort using it.

This is Freemax so were used to fantastic flavor from them, the MS line of coils produce Freemax flavor as I call it which is great. I used 2 different juices that I know very well in testing of this kit and flavor came through as I knew it would, surprising to me was I got more intense flavor vaping the pod/tank with the airflow wide open.

In closing I will tell you I will continue using the Marvos S in my personal rotation of devices because it works so well and is a real looker as well.

I would like to thank Tina and Freemax for providing the Marvos S for the purpose of this review and will tell you folks that I 100% recommend the Marvos S very highly.

THANK YOU
BIGBOB2322

Login to view embedded media
Take the space out of.......http:// youtu.be/pgglruPhV2Q

The GeekVape P Series SubOhm Tank is a new stock coil subohm tank which uses the existing Z Series coils inside.

GeekVape P Series SubOhm Tank - CHAPTERS

00:00 - Intro, specs & close up
09:00 - Vape
11:20 - Thoughts


Login to view embedded media

These tests below only note my personal ESTIMATED ratings for the batteries I tested at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.

Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of property damage, personal injury, or even death. They are not supposed to be used outside of a fully protected battery pack and you use them at your own risk. Never exceed the battery’s true continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.

Testing batteries at their limits is dangerous and should never be attempted by anyone who has not thoroughly studied the dangers involved, understands the risks, has the proper equipment, and takes all appropriate safety precautions.

If the battery has only one current rating number, or if it only says "max", then I have to assume the battery is rated at that current level for any type of discharge, including continuous.




Test Results
This cell appears to be accurately rated and is a decent performer that should be available at a lower price. It doesn’t perform quite as well as the Samsung 25R but where cost is the priority, and as 25R’s become harder to find, this could be a good cell to consider using.

The two cells I tested delivered 2532mAh and 2538mAh. This is fantastic consistency for a cell from one of the large, established China factories. Both cells exceeded their 2500mAh capacity rating.

Two cells were donated for testing by 18650BatteryStore (18650 Battery Store - Lithium Ion Batteries, Chargers and Accessories). Thank you!


Continuous Current Discharge Graphs



Ratings and Performance Specs Graphic


I want to work for the community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: Battery Mooch is creating battery and device tests | Patreon.

To see how other cells have tested check out this link: List of Battery Tests | E-Cigarette Forum

Hello, my joyetech ego aio not working. When i push button the light is blinking, and nothing happens.

Geekvape Poseiton Tank is an innovation based on Zeus Tank. Geekvape P Sub Ohm Tank features middle airflow leakproof system and three airway airflow control for precise airflow control. Geekvape P Tank has double-layer liquid chamber with shock-proof glass tube and is compatible with Geekvape Z series coils. Geekvape P is easy to refill from the top.




Features:
1. Middle airflow leakproof system
2. Three airway airflow control
3. Precise airflow control
4. Easy-to-disassembly
5. Double-layer liquid chamber
6. Shock-proof glass tube
7. Geekvape Z series coils
8. Double tank liquid storage
9. Top filling design
...

Click here for more:

Geekvape P Sub Ohm Tank: Geekvape P Sub Ohm Tank

Hi,

I bought a Freemax M Pro 2 tank a few months ago and unfortunately i've cracked the drip tip.

Their website says the thread is a 510 but the drip tip is an 810.

I haven't got a tape measure to hand as i'm on holiday in the middle of nowhere so was wondering if anyone knows which tip i need to buy to be delivered when i get home.

Kylin M Pro RTA increases the e-juice capacity to 8ml by engraving the cnc inside the hardware. Utilizing top airflow intake design, it is anti-leaking. It features long lifespan and replaceable mesh coil, you can choose different mesh style coils in different resistance to enjoy more vaping. It is easy to build and refill. A 0.2ohm and a 0.15ohm A1 M coils are included in the package.


Vandy Vape Kylin M Pro RTA Giveaway, 1 winner, ends on September 16th

Enter here

Marvos S 80W is Freemax’s brand new side-by-side mod/pod mod kit with a single 18650 external battery, consisting of Marvos DTL Pod Tank and Marvos S 80W Battery, while Marvos 60W is Freemax’s first pod mod kit with Tri-Proof Technology, consisting of a Marvos DTL Pod and Marvos 60W Mod.



Marvos 60W Kit has a 2000mAh internal battery for a whole-day vaping with 2A Type-C fast charging within 90 minutes, however, Marvos S 80W Kit is designed with a single 18650 external battery with Type-C USB Port and 2A Fast Charging function.

Freemax Marvos S 80W Mod has a 510 connector, so you can use both Marvos DTL pod with a 510 adaptor and any vape tank on this Marvos S 80W Mod. However, Marvos 60W Mod can only be compatible with Marvos DTL pod.

Can you find any other difference between Marvos 60W and Marvos S 80W? Welcome to leave your comment below.

Hey guys. Today let's look at the Z MTL Tank by Geekvape. It is the first device in Z series special for MTL vaping. Are you dying to learn more? Here we go!

The Z MTL Tank is a perfect combo for zero leakage and precise MTL airflow control. It adopts industry-leading leakproof top airflow, the air flows from the side inlets, more easily reaching the coil to make MTL flavor better. The glass tube is well protected by a metallic shell, which makes the tank more resistant to breaking.

And there are two hollow-carved "Z"s on the metallic shell, which is a stylish way to check the liquid level. The Z MTL Tank works with brand new Geekvape A Coil, from the kit you can get two of them (0.8Ω, 12-16W/1.2Ω 8-12W). All in all, you will get a great MTL experience from A to Z!

Buy it here: Geekvape Z MTL Tank 2ml

You may also like:
wotofo profile ps rda review
dead rabbit r tank price

Ambition Mods Ripley MTL / RDL RDTA, designed by The Vaping Gentlemen Club, is elegant RDTA for MTL and RDL vaping. Ambition Mods Ripley RDTA comes with 22mm diameter and interchangeable 510 drip tips. Ambition Mods Ripley features compact 2-post single-coil deck and "Xylemas" SS304 Capillary tubes or mesh rolls to transport e-juice. Ripley RDTA has 3.2ml capacity and 2 opposite air inlets in the top cap. What's more, Ambition Mods Ripley can exchange Air pins for air inlets(2* 0.8, 2* 1.0, 2* 1.6, 2* 1.8, 1* blind) for wonderful flavor.


The Vaping Vaping Gentleman Club Designed Ambition Mods Ripley MTL RDL RDTA rebuildable dripping tank atomizer is with the same double opposed airflow system of the Bishop RTA is re-proposed, further increasing the possibilities by also inserting Air Pins with a wider flow. This system allows to obtain a high turbulence inside the chamber and therefore an excellent aromatic performance, while maintaining a laminar flow in intake and exhaust.

Ripley RDTA has kept the shapes and innovative features of the Bishop's Deck, now considered the reference point of the entire sector in terms of ease of rebuild, adding a surprise: directly inside the characteristic "sledges" of the cotton, Ambition Mods has put the holes for housing the Xylemas. Xylemas are stainless steel capillary microtubes developed by The Vaping Gentlemen Club and now considered one of the best possible system for the ascent of the liquid in an RDTA. The internal and external diameters of the Xylema and of their housings as well as the trays that have been obtained at their base have been carefully calibrated to offer the most reliable Juice-feeding possible. On the Deck you still find another distinctive feature of the Bishop: the two wells that collect the condensation and increase the air vortexes on the sides of the coil.


Features:
510 threading connection
Size: 22 x 52mm
Material: SS316 & POM & glass & silicone
Capacity: 3.2ml
22mm diameter
Elegant design RDTA for MTL and RDL
Designed by The Vaping Gentlemen Club, produced by Ambition Mods
Cooling grooves with holes on four levels for heat dissipation from top cap
Interchangeable 510 drip tips
Compact 2-post single-coil deck
Liquid transparent through "Xylemas" SS304 Capillary tubes or mesh rolls
3.2ml glass tank, filling by the filling opening on the deck
2 opposite air inlets in the top cap
Air pins for air inlets (2 x 0.8, 2 x 1.0, 2 x 1.6, 2 x 1.8, 1 x blind), exchanged by plug-in system
Extensive accessories included


More details for this RDTA, please check >> https://www.3fvape.com/51892-ambition-mods-ripley-mtl-rdl-rdta.html

Geekvape Z MTL Tank is the first Geekvape Z Series Tank exclusive for MTL! Industry-leading leakproof top airflow. Two hollow-carved 'Z' s on a slim body. New Geekvape A Series Coil, made for MTL! This MTL experience is from A to Z!




Features:
1. Stylish tank design, two hollow-carved 'Z' to protect the glass tube by the metallic shell
2. Top-to-bottom airflow system, side air inlets control
3. Industry-leading Z-level leakproof design, zero-leakage
4. New Geekvape A series coil for MTL
5. 2ml capacity, top filling design
...

Click here for more:

Geekvape Z MTL Tank: Geekvape Z MTL Tank

Hello,guys!I have good news for you. "Labour Day"Promotion is coming! Ends at 23:59:59 on September 8th.

Use discount code "LABOR12" for sitewide 12% Off.

Entrance:vapesourcing.com

You may like:

Uwell Caliburn AK2
m100 geek vape

VOOPOO Drag S Pro Kit 5.5ml 3000mAh
Quick Link:
VOOPOO TPP X Pod Tank 5.5ml

Description:
Drag S Pro Kit contains an 80W Mod of 3000mAh battery capacity and a 5.5ml TPP X Pod. It not only provides the top performance with a toggle switch (on/off button) but also retains the traditional On/Off function of pressing five times. Drag S Pro increases the output voltage to 8.5V, which makes it bring a more steady flavor even when the battery is about to run out. In addition, the new GENE.FAN 3.0 chip brings a more powerful cloud and a more stable flavor for it. Designed with SMART/RBA/TC mode, Drag S Pro will satisfy different vaping needs, Button and Auto mode are also available for you to choose from. There is a new airway layout to avoid direct contact with e-liquid. The new TPP X Pod is adapted to the most powerful coil of the TPP platform. Drag S Pro will present more precise airflow control and super cloud with the combination of a 360° infinite airflow system and bottom airflow. There are also air holes designed for MTL vaping. Drag S Pro-Kit is compatible with all TPP/PnP Coils. So many great functions it has, just get it to enjoy an amazing vaping experience.


Main Features:
1. One button switch, the boost mode of 8.5V
2. The new GENE.FAN 3.0 chip
3. 360° infinite airflow system and bottom airflow
4. With 5.5ml new TPP X Pod, newly upgraded TPP DM4 coil
5. 3000mAh built-in battery, 0.96 inches TFT screen
6. Equipped with high sensitive air sensor
7. 5V/2.5A upgraded type-c fast charging
8. Equipped with two TPP coils of 0.15ohm and 0.3ohm
9. Compatible with all TPP/PnP Coils


Specifications:
Brand: VOOPOO
Product Name: Drag S Pro Kit
Mod Material: Alloy+Leather
Output Power: 5-80W
Output Voltage: 0-8.5V
Mold Resistance: 0.1-3.0ohm
Battery Capacity: 3000mAh built-in battery
Pod Capacity: 5.5ml
Pod Material: Stainless Steel+PCTG
Pod Resistance: TPP-DM1 0.15ohm, TPP-DM4 0.3ohm(included)
Screen: 0.96 inch TFT screen
Color: California Orange, Classic Black, Garda Blue, Mystic Red, Sahara Brown, Sapphire Blue, Basalt Gray




Package Contents:
1* Drag S Pro Device
1* TPP X Pod 5.5ml
1* TPP-DM1 0.15ohm Coil
1* TPP-DM4 0.3ohm Coil
1* Type-C Cable
1* User Manual

Does anyone have both? If so, what are your thoughts? I have a Drag X coming in the mail today, but also really want the LV Ursa Quest. Thanks for any/all input

J

Sorry about the ad in the beginning.

Login to view embedded media

I, for some unknown reason, started craving a 50mg kick in the chest and bought myself a new fancy shmancy disposable. Lovely, it is. But. Mango ice cream isn't all that. Kinda weird actually. I love eating real mangoes but mango vapes are just weird. To me anyway.

Hi everyone im Ata from Turkey i have been vaping since 2016 im already in turkish vape forums but im looking for new friends and saw some more new setups we are having a difficult time for supplying new stuff from other countries in below you can see my setups.

Eleaf pico - asmodus minikin 2 - sx mini s class - wismec rx300 - drag x - drag 1 - vopoo vinci 2 - minifit - smok nord 4 - tarot mini - doggystlye 2k16 - griffin 25plus - kylin mini v2 - berserker v2 - taifun gt3 - maddog rda - troy 1xv3 - ida rba - tfv 8 - aromamizer plus v2 rdta

Wotofo Profile PS Dual Mesh RDA collaborates with Mrjustright1. A fascinating and warm cloud associated with the special dual mesh that keeps the vaping experience more enjoyable and fascinating. It is capable of 3ml juice well that is suitable for both direct dripping method and squonkable way. Armed with the flexible honeycomb and side airflow system, you can fine-tune the airflow by side airflow ring to takes more precise airflow control and super cloud. it is formed from the toughest stainless steel material for its body material and made of German PEEK for its insulator material, having an incorporated art into this solid body. In terms of the adjustable wattage, you can choose your power requirement by adjusting the wattage between 60W and 90W, and the recommended wattage is no more than 85W.

Quick Links:
Wotofo A1 Mesh Style Coils 10pcs

Parameter:
Size: Ф28.5* 35.5mm(with 810 drip tip and 510 pin)
Material: Stainless Steel & German PEEK Insulator
Drip Tip: 810 Resin Drip Tip
Configuration: Dual Mesh in Parallel or Series
Included Mesh Resistance: 0.3ohm, 0.6ohm(series build), 0.15ohm(parallel build)
Wattage Range: 60-90W(best 75-85W)
Juice Well Capacity: 3ml
Thread: 510

Features:
The collaboration of Wotofo and Mrjustright1
Dual mesh RDA
3ml e-Juice well capacity
Flexible honeycomb
Adjustable side airflow
Turn the usual parallel deck into a series deck
Direct dripping method & squonk way

Hey guys. Today let's check out the Wasp Nano RTA 2 by Oumier. It is the latest addition to the popular Wasp Nano family which is one of the best series of atomizers on the market. Here we go!

The new Wasp Nano RTA 2 is an upgraded version based on the V1 and has an overall diameter of 24mm, which will look great on both single battery and dual battery box mods. In addition, this tank has a maximum e-juice capacity of 2ml or 3ml and has a top fill design. This atomizer is primarily constructed out of stainless steel material and includes a PCTG drip tip with a wide bore.

Inside the RTA is a dual post single coil build deck, making coil building a breeze. Moreover, there are two large adjustable airflow slots at the bottom of the RTA, the unique airflow design prevents leaks and provides a better vape experience. Lastly, it has a gold-plated 510 connection pin, ensuring great conductivity. For the price, this Oumier RTA is hard to beat and can easily make it into the best RTAs of 2021.

Buy it here: Oumier Wasp Nano RTA 2 2ml 24mm

You may also like:
fat rabbit rta release date
innokin coolfire z80 review