Just got a Warwolf today and disliked the gold color. Painted it Gray...

Hi! I'm in search of a new or very gently used MVP5, preferably in white. If you have one lying around, let's talk!

Hello there and welcome to Z-Lee's overly done vape reviews. In this review, we'll be taking a deeper look at the Freemax Marvos 60W Pod Kit. Based on the compatibility of the MS-series coils this pod kit uses, it falls in closely with its relatives, the Marvos S 80W, the Marvos T 80W, and the latest release of the Marvos 80W, but is different enough to set itself well apart. The biggest difference being its IP67 rating.

Yesterday, we took a peek at the Freemax Onnix 2 Pod Kit Vape Pen that utilize Freemax's new OX-series coils purposed specifically for the Onnix and Onnix 2. That review can be found here. Being that the Marvos 60W does not have a 510 connector or adapter, it is purely a pod kit and in that fashion, similar in concept to the Onnix 2 vape pen, but definitely its bigger and more powerful brother (or sister). I'll get more into the specifics down below.

As mentioned in the Onnix 2 review and several times over in the forums, being mainly a Restricted Direct Lung (RDL)/Direct Lung (DL) vaper, the Freemax 904L-series coils currently hold the standard by which I compare all other RDL/DL premade coilheads. That title may very well be stripped away by the new MS-series coils used in the Marvos family pod kits. More on this later, as well.

I want to thank @Freemax_Jerry for providing me the opportunity to do a review on this delightful product. As always, I will remain neutrally bias and critical in this review (again, even though I love Freemax, I give credit where it's due, and will just as easily point out flaws and potential issues). This review will provide you with my conclusive experience over the past 12 days of use.

Let's take a peek, shall we?

(All images can be clicked on for easier reading/viewing)



What comes in the box.


Both the US and Standard Edition are identical with the 4.5 mL pod while the TPD Edition is restricted to the usual 2 mL pod tank.


Marvos 60W Features.

Main features to note:

• A slide airflow control
• New MS chip
• IP67 rated (Shock/Dust/Water Proof)
• FM CoilTech 4.0 (also used in their 904L-series coils) and ranging from 0.15 to 0.5 Ohms
• 3 Output modes (Smart/Power/Bypass)
• 0.96 inch TFT with colorful options and easy-to-read screen
• Anti-spitback drip tip

The Specs.



The Marvos 60W comes in 4 different colors.

• Black
• Blue
• Gunmetal
• Red

The colors give this pod kit just enough accent to give it some character, but without being tacky.


An exploded view.

The 810 drip tip does come out of this pod. Not a lot of moving parts here which makes this a solid kit on top of its IP67 rated build.

The MS-series coils come in 4 different resistances:

• 0.15 Ohms
• 0.25 Ohms
• 0.35 Ohms (what I'm currently using)
• 0.5 Ohms

Normally, a coil comes pre-installed in the tank for most kits. With the Marvos 60W kit, you get both the 0.25 and 0.35 Ohm coils and both are packaged giving you the option of choosing which coil you want to start with. I wish more companies would do this so that I don't feel forced to use what coil is already unwrapped and pre-installed.

Also it should be noted that I am getting better flavor from the 0.35 Ohm MS coil than I am from the 904L-series coils I use in the Fireluke 3s. As mentioned at the very beginning, 904-L's up to this point have been the coils I compare all other RDL/DL premade coilheads to. I was and am absolutely shocked. The only potential downside I can see is overall coil life, but I haven't worn the 0.35 Ohm MS coil out yet and I've maybe put 25-30 mL of juice through it. In comparison, I've probably sucked 80-90ish mL of juice through the original 904L X2 I currently still have in my very first Fireluke 3, and it's still pumping out great flavor. That is the standard to beat. Either I got a super freakish coil, or they're just that much ahead of the rest of the pack. Read reviews - this isn't embellishment what-so-ever. In regards to overall flavor though - the 0.35 Ohm MS coil wins. I have not tried the 0.25 Ohm coil that came with the Marvos Kit, yet. I am however using the 0.15 Ohm coil in the Marvos S and the 0.35 Ohm coil beats it hands down.


Pod/pod tank compatibility.

The PCTG DL Pod is what comes included in this kit. The Glass DL, RTA Pod, and DL Pod Tank (which includes the 510 base) either come on other kits or can be purchased separately.
*To clarify the asterisk at the bottom of the picture, the RTA Coil that fits into the RTA pod is of different dimensions than the MS-series coils, therefore the RTA coil will not fit into the PCTG/Glass DL pods or the DL pod tank, and vice versa. It does however appear that the RTA Pod will fit into the 510 base that comes along with the DL Pod Tank so that you can use it on 510 devices. I am not certain on this though.

From left to right: Marvos S 80W, Marvos 60W (this kit), Marvos T 80W, & Marvos 80W

All of the pods can be interchanged between all 3 of the other available pod kit mods. A small caveat - the Marvos S does require the 510 base that you fit the pod into, to be able to screw it into the Marvos S mod.

Internal 2000 mAh battery with USB-C type charging.

The internal battery on this pod kit is almost on par with the Marvos S 80W which I use a 20A 3000mAh 18650 in. I have been vaping the 0.35 Ohm coil at 30 Watts and the Marvos S at 40-45 Watts. Currently, the Marvos in this review has registered 462 puffs on 2 almost full battery discharges. That averages 230ish puffs per almost full battery drain. The Marvos S shows 598 puffs and that mod has now fully discharged 4 times, meaning I averaged about 150 puffs per full battery drain. I am using 2/3 of the power in the Marvos than I am with the Marvos S, so in terms of equivalency (without factoring in mod efficiency), the Marvos would need to average 275 puffs per battery drain to be equal to the 18650 I'm using in the Marvos S. But the 18650 has 1000mAh more capacity than the 2000mAh battery in the Marvos internal battery. From this, we can conclude that the efficiency of the Marvos 60W is better than the efficiency of the battery I'm using in the Marvos S. The internal battery in the Marvos 60W is a great performer. As listed, this battery does fully charge in less than 90 minutes.



I've been using the Marvos 60W Pod Kit for almost 2 weeks now. I've vaped probably 25-30 mL worth of juice through the 0.35 Ohm coil. I'm continuing to be wow'd, and I'm sure I will to until this coil burns out. If it lasts as long as the 904L coils do, which also use FM CoilTech 4.0, then it will become the new standard for me.

I have not tested the IP67 water proof rating simply because I'm not interested in intentionally trying to break this. Have I dropped it a few times? Yes. Has it fallen off of my desk? Yes. Have I tipped it over on its side a million times already? Yes. Has it been in contact with dust and air particles? Yes. I will say this is a solid pod kit in terms of durability. If you choose to buy the glass DL pod and you are a clumsy person, buy a few. The durability will definitely go down.


Out of the Package.

The packaging will definitely get this item to your doorstep safely under normal transportation wear and tear.

The form feel of this mod in hand is quite nice. I have smaller hands, so they fit around this mod very easily without having to death grip it for fear of dropping it. The liquid-silicone rubber they encased much of the sides and back with is ribbed for your pleasure, and executed better than I've seen on other mods. It might not be as grippy as say, the Aegis Legend, but that in turn also makes it less of a dust/dirty/anything that touches it, magnet. It still provides a bit of additional grip, and it serves its function of protection perfectly.

The last picture on the right is a closer look at the USB-C charging port as well as the rubber plug that seals it. The seal itself is a tad bit hard to get out without fingernails, but I'd expect that on an IP67 rated mod.

The buttons are as clicky as I've ever seen on a mod, but they're crisp. I would compare the click of the directional and firing buttons to that of the fire button click on the Aegix Legend/Legend 2/X. There's no mushiness when pressing down.


The Coils.


Left Picture:
0.25 Ohm MS coil recommended to be vaped at 40-60 Watts.

Right Picture:
0.35 Ohm MS coil recommended to be vaped at 30-40 Watts.

Both coils come prewrapped so you can choose which to use first. As mentioned above, I like not feeling forced to vape whatever coil comes in the pod/tank like most other kits do. In all of my experience using Freemax coils, I've found that the best flavor is generally below or on the lower end of the recommended Wattage range. If you like a bit of a warmer vape and more clouds, then you'll likely want to be on the higher end of the recommended range.


The Pod.


Left Picture:
What the pod looks like w/out a coil inserted. Note that the rubber refill plug has been pulled out so that you get a better look at it. The actual plug part of the rubber is thicker than it is where it attaches to the pod. This makes holding the flange back while refilling much easier leaving less of a potential for there to be a mess. The thinner part of the flange is not so thin that you need to worry about tearing it while getting the plug out of the hole. I've experienced this on other pods and to me, significantly reduces the expected life of it.

Right Picture:
What the pod looks like with a coil in it. Be sure to press the coil in until the base of the coil above the airflow section is flush with the plastic bottom of the pod. A firm press should do just fine.

I forgot to take a picture of the drip tip, but it is removable. The drip tip itself has 2x o-rings on it. The pod portion where the drip tip seats has no o-rings, but the drip tip fits in tight enough where it isn't loose.


Refilling & Priming.


Left Picture:
The refill hole is very easily large enough to fit a chubby gorilla sized nozzle completely inside of it which will alleviate a lot of juicy messes. If you do this, you shouldn't have to worry about juice plugging the hole causing an instant overflow of juice.

Right Picture:
Remember to prime the coil before you pop it into the pod. Squirt enough juice to saturate the exposed wick in each of the 4 juice ports; doing this 3-4 times for each juice port after it soaks in should do the trick. You'll know it's fully saturated when you see a bubble forming outside of the juice ports like so. You can also squirt some down inside along the coil, but I've found that this often leads to initial flooding when filling the tank which is going to cause spitback and gurgling. The drip tip has an inverted cone shape to help with preventing spitback, but if you can pour juice out of the drip tip when you tip it upside down, the coil is flooded.



Remember, bubbles are good. If you do not see bubbles, you can expect dry hits. Bubbles tell you that the vaping/consumption of juice is being properly displaced with air. If no air is getting through, then that means the juice has stopped being wicked.


Sliding Airflow Vents.


The first two pictures show the mod with the airflow vents completely open (all the way counter-clockwise). The 3rd and 4th picture show the mod with the airflow vents all the way closed (fully rotated clockwise). As you can see in the pictures, when fully closed or fully opened, the airflow control lever sits tight against the mod. If you don't have any fingernails, it's going to be hard to move. On the beneficial side, this is also going to make it less likely to catch on anything. I don't know about you, but when I find where I like the airflow control, I don't usually mess with it. The lever/knob is stiff enough where you won't have to worry about it sliding around on you. It does stick out slightly if you choose to have the setting in the middle somewhere between closed and open.

The style of vape fully closed is a Restricted Direct Lung, and fully open is a Lightly Restricted DL. There will be no wind tunnels for this pod kit.


Top & Bottom View.


Left Picture:
This is a top down view of where the pod will seat down into the mod. The pod fit is loose enough for the it to create very little friction when putting it into the mod, and the magnets are strong enough to keep the pod from clicking or sliding around. Be aware that if you let the pod "slap" down into the mod, you're creating unnecessary pressure on the coil seals. I slapped the coil down into the pod 40-50 times to see if there were any erratic coil readings and while the readings were consistently accurate, the pod started to leak because of this. If you do it once every so often, probably no big deal. Continue to do it repeatedly, and you can expect a little bit of juice seepage from the bottom of the pod. The connector pins are spring-loaded and solid.

With 25-30 mL of juice used over the span of 12 days, I am happy to report that there is no leakage or condensation build up at all in this area between the pod and mod; if there are any leaks, this is most likely where you're going to find them.

Right Picture:
The liquid-silicone sleeve extends down around the bottom of the mod which creates a bit of a cushion when you set the mod down. I've only seen this in a few pod kits and I must say it's a nice little added feature.

Hello everyone. I’m here today with my very first review for OXVA. I am fairly new and inexperienced when it comes to OXVA devices. My sole OXVA item that I owned before now was the Arbiter Solo. I was sent the OXVA Arbiter 2 for the purpose of providing a fair and honest review. The Arbiter 2 uses some really innovative design features as far as airflow design which in turn helps to provide exceptional flavor.





WHAT’S IN THE BOX?



SPECIFICATIONS:



FEATURES:

100% leakproof

Innovative top-to-bottom fanned airflow system

Dual / single coils configuration

5ml capacity, top filling design

810 & 510 replaceable drip tip












INITIAL THOUGHTS:

The packaging for the Arbiter 2 has a very nice color picture of a black version of the tank on the front of the outer sleeve. However, I received the gunmetal version for the review so I guess one image is used for all packaging. In case you don’t know, Justin Lai is the designer for OXVA and as far as I know is credited for most if not all of their designs. His name is on the side panel of the outer cover.

On the rear of the outer cover is a brief description of the Arbiter 2 as well as a list of contents, a scratch and check authenticity panel, and contact information for OXVA.

Once the outer sleeve is removed, you will find the Arbiter 2 rta and a spare straight glass in a foam insert as well as two 3mm .4 ohm Ni80 coils, two cotton threads, user manual, warranty card, and a spare parts bag that contains extra grub screws, o rings, an allen wrench, and a 510 drip tip adapter which I’m assuming is meant to be used when using the Arbiter 2 with a single coil configuration or perhaps for those that just like a little tighter draw.









As I had mentioned in the beginning, I don’t have much experience with OXVA devices but had high hopes after hearing much about the Arbiter 2 and very much liking the Arbiter Solo. One thing I noticed immediately when looking at the tank was the swirled 810 drip tip. To me, that tells me that the manufacturer has paid a little extra attention to detail to make their product stand out.



The Arbiter 2 is easily disassembled to completely clean. It comes with the bubble glass pre-installed which I prefer but at this point you can also switch to the straight glass if you so desire.



I like that there are notches cut in the base as well as the top cap. The top cap has a black o ring inside and there is not an o ring on the drip tip. I’ve been seeing more and more of this the more tanks I review. Honestly, it doesn’t really matter to me as long as the drip tip stays seated and in place.



The deck design on the Arbiter 2 is the claim to fame on this tank. The raised sides of the deck have five different sized holes on the top and three more holes underneath to create the top to bottom FAN airflow which provides airflow around the coils for very good flavor production. The airflow comes in from the top airflow holes, goes down and comes through the sides with the holes as well as two airflow holes underneath the coils to circulate the airflow around the coils. In my opinion, this is a very ingenious design.







Another well designed feature in my opinion is the UN.DETACHABLE airflow chamber that stays inside the main body instead of being removable like I have seen in one or two other tanks by different manufacturers.



Once the top cap is removed, underneath are two very nice sized liquid fill ports that will accommodate most bottles used for filling the tank.



The Arbiter 2 has two very large airflow intake holes in the top that should be plenty of airflow for just about anyone. Myself, I ran it at about 1/3 open with the watts set at 55 watts. I don’t really like a hot or very warm vapor so that was a good fit for me.

The outer barrel of the tank has the OXVA emblem on one side and the OXVA Arbiter name on the other side.

The bottom cap has the Arbiter 2 name on it and Justin Lai. The gold plated center pin does protrude some which I am told is good for mechanical mods. I have very little experience with mechanical mods so couldn’t really say that for sure.







I built the tank using the two included .4 ohm 3mm Ni80 coils which once installed read .17 ohms on my Riva 200. I trimmed both coils to 4.5mm in length and found that to be about right but feel like you could go up or down a little and still have a good fit. I very much like that the grub screws are allen wrench heads instead of flat head slotted like many tanks I’ve tried lately. One other thing that I noticed when installing the coils that I thought was nice was that the grub screws once loosened to insert the coils were still inside the opening instead of sticking out of the body. It might sound silly but being still inside the threading, it makes it very easy to insert the allen wrench and get it to fit instead of having to look and align the wrench when the screws are sticking out. It’s not as bad with allen screws as it is when flat slotted screws are used. This could also be just me getting older and not having as good of eyesight as I used to but this little feature is appreciated.

Once the coils were installed, straightened, and dry burned to get out any hot spots, I was able to use one of the included cotton threads to wick both coils. I mentioned this in another review but in case you didn’t read that one then I’ll mention it again. With the included cotton threads, if you pull it all the way through and trim it at the end then you can leave the eyelet on the left over wick and it makes it easier to thread through the second coil. I don’t know about you but I like easy. Also, that leaves a second cotton thread for another wick at a later time when it’s needed.









FINAL THOUGHTS:

Overall I am very pleased with the operation of the OXVA Arbiter 2 tank. I felt like it delivered exceptional flavor production and huge amounts of vapor even at the settings that I used. I think the included coils could easily be run at a much higher setting than the 55 watts that I ran.

I decided to wait to mention how the Arbiter 2 performed with a single coil until the end since it is advertised to be able to be used as a single or dual coil rta. There is no doubt that it performs very well in the dual coil configuration but I find myself using single coil rtas most of the time. It has been my past experience that most dual coil rtas don’t perform that well with a single coil. Since there is plenty of room on the deck I decided to make a 3.5mm 316ss that came out to .56 ohms. I thought it might look funny on the deck with just one coil but centered it and it looked good. I wicked the coil and just combed out the wick tails a little bit being careful to not thin them out too much so I had enough cotton to go in the liquid ports. At first the flavor was just mediocre but got more flavorful the more I broke in the coil and wick. Would I say it’s the best flavor I ever got from a single coil? No but it is very respectable flavor for running a single coil in a dual coil rta. I plan on running this single coil for some time to see if the flavor progresses more and may try a 3mm coil which is what I usually use on single coil rtas. I did change the 810 drip tip for the 510 adapter and installed my own drip tip for this configuration.

If I had to pick a con for this tank then it would be the shoulder that the drip tip sits on. With that shoulder there are some drip tips that would hang over. In my opinion it’s a pretty minor con for a tank that works very well.

The Arbiter 2 is a very well built and designed rta. I like the ease of building and that the airflow chamber is stationary inside the barrel of the tank so there’s one less part to deal with when building. The ingenious deck design gives the user the FAN airflow that in turn creates very good flavor for the user. The flavor and vapor production is very good in dual coil configuration and decent with the single coil build that I did. I look forward to trying different coils and builds in the Arbiter 2. It’s a very versatile tank. I was asked if I thought the Arbiter 2 could be chosen as the best RTA of 2021 and I think it has a pretty good chance.

I’d like to thank OXVA and Sam for sending the OXVA Arbiter 2 RTA for this review and thanks goes out to the readers. I look forward to future cooperation with OXVA and hope to see you reading my reviews in the future. Below is a link to the OXVA website so you can explore the wide variety of products offered by them.

Arbiter 2, Top to Bottom Fanned Airflow, Best RTA of 2021 – OXVA

Here brings the 2 mod kit from VOOPOO Drag Series. The Voopoo Drag S Box Mod + PnP-X Tank Kit 60W and the Voopoo Drag X Box Mod + PnP-X Tank Kit 80W


Voopoo Drag X PnP-X Kit must be soared in popularity to be a salute to the knight. Meticulously engineered, it holds a 5ml magnetic suction pod couple with two PnP coils of 0.15ohm and 0.3ohm inside. The Drag X PnP-X Mod Kit inspires to vape for infinite airflow to vaporize to the luscious clouds that it has to offer. Drag X Pnp-X is also furnished with a special knob-filling on the top, press the semi-hidden button and rotate to the left, and then put out the silicone plug to fill, this design can stem the e-liquid and have a clean hand when vaping.

When you hold the Drag X PnP-X Kit in your hand, the customized leather and touch make it feel like you acting as a knight, imagining that currently you are riding a horse and holding a real spear to fight for honor on the battlefield. The overall device is powered by a powerful and replaceable 18650 battery (not included) and is capable of withstanding up to 80W of power. Aside from that, it is equipped with a Type-C 5V/2A fast charging interface for repeated use, which is more pronounced and long-lasting. Adopting the new generation GENE.TT chip has a smart mode to automatically recognize your coil as well as match suitable wattage. 0.96 inch TFT color screen also considers anther functions such as PUFF recording, SCORE ranking, SMART mode, etc. Plus, it fires only 0.001s for instant reaction by the single button and boasts multi-intelligence for you.


Voopoo Drag S PNP-X Kit has both an authentic and heroic spirit, which likes a knight with a sword in his hand, ready to fight for glory and his girl, taking you back in Arthurian Europe, as a knight of the Round Table. With its leather and metal material, the knight product - Drag S PnP-X Mod Kit perfectly fits the curvature of your fingers. The Voopoo PnP-X pod can cater to 5ml vape juice, it is equipped with a semi-hidden button with a special knob-filling on the top, press the semi-hidden button and rotate to the left, and then put out the silicone plug to fill. Customizing your cloud via its infinite airflow valve and based on its 0.1~3.0ohm PnP coils, the sought-after flavor upgrades to a high level.

Compared to Drag X PNP-X Kit that is powered by a single 18650 battery, Drag S PNP-X houses a 2500mAh built-in battery and serves a 5-60W output range. Press this single button, it ignites with 0.001s, its amazing reflexes are all thanks to its GENE.TT chip. Alternatively, the kit can automatically recognize your coil by the smart mode for the best wattage. Comes with the Type-C 5V/2A fast charging interface, which the kit can keep in the long run. The main thing to monitor your kit is its 0.96 inch TFT color screen, which has the function with PUFF recording, SCORE ranking, SMART mode, etc. So get this Voopoo Drag S with PNP-X Tank and then have a try, more convenient and more affordable.


Quick links for these 2 Voopoo Drag Products as below >>


Drag X PnP-X 80W Kit >>https://www.3fvape.com/53693-voopoo-drag-x-80w-pnp-x-kit.html


Drag S PnP-X 60W Kit >> https://www.3fvape.com/53686-voopoo-drag-s-60w-pnp-x-kit.html

The GeekVape Obelisk 65 FC Pod System Vape Mod Kit is the first pod mod with fast charging.

This Obelisk 65 FC Pod Mod Kit by Geekvape can be fully charged within 18 mins.

GeekVape Obelisk 65 FC Kit features TUV-tested battery: 2 x 1100mAh built-in battery with max 65W output. Obelisk 65 FC supports Chip-triggered Smart / Power / TC-SS / TCR / VPC / Bypass / OTG modes to meet different needs.

GeekVape Obelisk 65 Fast Charing Pod Mod Kit is paired with 4.5ml clear pod, easy to top filling design and top airflow adjustment.

Features:
The First Pod Mod with Fast Charging, 18-Min Fully Charged
Battery: 7.4V, built-in 2 x 1100mAh, 7.4Wh
Output: 5~65W
Modes: Smart / Power / TC-SS / TCR / VPC / Bypass / OTG
Temperature control: 100~315'C / 200~600'F
PD Fast Charging: 15V, 3A / 45W (Max)
Regular Charging: 5V, 2A (Max)
Longest Vaping Time: 10s
Working Temperature: -10~60'C
Screen: 0.96 Inch TFT Color Screen
Charging Port: USB Type-C
OTG Reverse Charging: 5V, 2.4A (Max)
2 x 1100mAh Built-in Battery
Max 65W Output
TUV Tested Battery
4.5ml Clear Pod
Type-C Direct Charging
Smart Mode

More details for the Geekvape Obelisk 65FC, please check >> https://www.3fvape.com/53715-geekvape-obelisk-65-fc-pod-mod.html

This proposed tax seems certain to contribute to a greater incidence of lung diseases going forward.

"In the scramble to search for revenue to fund President Joe Biden’s Build Back Better plan, House Budget Chair John Yarmuth (D‑KY) added a nicotine tax to the ever-changing proposal. The proposed tax wouldn’t raise the price of traditional cigarettes, which are already taxed at the federal level, but it would introduce a massive new tax on e-cigarettes and other smoking alternatives, which research shows are dramatically safer options for smokers."

"Michael Pesko of Georgia State University, one of the country’s leading economists when it comes to analyzing the effect of e-cigarette taxes, estimates the new tax on nicotine alternatives would cause 2.7 million more daily adult smokers, 530,000 more teen smokers, and 29,000 more prenatal smokers.

This is because e-cigarettes are substitutes, not complements to combustible cigarettes, and millions of American ex-smokers have used these products to get off smoking traditional cigarettes."

https://reason.org/commentary/house...garettes-would-lead-to-millions-more-smokers/

GeekVape Obelisk 65 FC Kit

Obelisk 65 FC Kit is powered by dual built-in TUV-tested 1100mAh batteries with 65W max output. The TUV-tested durable batteries makes it long-lasting and safe to use. Obelisk 65 FC Kit is the first-ever fast charging pod mod, which can be fully charged within 18 minutes. It also supports OTG Reverse Charge and USB-PD Charging Adapter (15W-45W). There are Smart/Power/TC-SS/TCR/VPC/Bypass/OTG Mode for your option. The chip-triggered smart mode can automatically select the best output for the best flavor and prevent coils from burning out. Equipped with Obelisk 65 Pod of 4.5ml capacity, Obelisk 65 FC Kit also has top filling system to prevent leakage effectively. In addition, with top-to-bottom airflow system, it guarantees the smooth flavor and user-centered experience. Obelisk 65 FC Kit is fit for GeekVape B Series 0.2/0.4ohm Coil.


Details:
1. The first-ever fast charging pod mod, 18-min full charge-up speed
2. Supports OTG Reverse Charge/USB-PD Charging Adapter (15W-45W)
3. TUV-tested durable battery, dual 1100mAh built-in batteries with 65W max
4. Smart/Power/TC-SS/TCR/VPC/Bypass/OTG Mode for your option
5. Chip-triggered smart mode for the best flavor and prolonging coils' life
6. Top-to bottom airflow for smooth flavor and user-centered experience
7. Easy-to-use pod with leakproof design
8. 4.5ml e-juice capacity, easy top filling system





VOOPOO PnP-X Pod Tank

PnP-X Pod Tank is suitable for VOOPOO Drag S/X PnP-X Kit. It can hold 5ml e-juice. It comes with the upgraded decorative metal ring and knob-filling on the top. In addition, it features a more convenient way of refilling, a more compact anti-leakage design, too. Infinite airflow system enables PnP-X Pod Tank to support the adjustment of any airway. PnP-X Pod Tank is compatible with all PnP coils. PnP-TM2 0.8Ω Coil and PnP-VM6 0.15Ω Coil are included.

Details:
1. 5ml magnetic suction pod
2. Knob-filling on the top
3. Infinite airflow system supports the adjustment of any airway
4. Compatible with all PnP coils, including RBA coil
5. Upgraded decorative metal ring
6. More compact anti-leakage design





Joyetech eGo Air Pod Kit

eGo Air Kit is a simply portable pod system kit of 2ml e-juice capacity. There is a mesh coil inside to provide boosting flavor and throat-hit to you. You can open silicon plug on the side to refill, which is easy and leakage-proof. Two options are available for you: using with the 510 mouthpiece, using with the filter on top. eGo Air will present restricted airflow to bring you great MTL vaping. eGo Air Pod Kit is built with 650mAh battery.

Details:
1. 650mAh battery capacity
2. 2ml e-juice capacity
3. Mesh coil inside
4. Easy filling without leakage
5. No button design, tight draw
6. Two options: with 510 mouthpiece, with the filter on top
7. Restricted airflow for MTL vaping

Hi not new to vaping but first time wanting to mix my own i need some pointers... been researching the mixing calculators and such.... annd places to purchase all i need to mix my own but could use some advice

places to get flavoring, ect pg,vg.nicotine
supplies needed to mix
best flavoring sites
and how much flavor to add to the vg/pg mix
i have vaped murica which is a apple strawberry blueberry vape almost daily
looking to replicate my own
please help me!!!!!!

I was in another town for work yesterday and as I often do, searched for vape shops. Google returned one shop in this town so I made my way there. It is more of a smoke shop with tobacco, CBD, pipes, bongs, and the usual stuff, but there was one case with vaping supplies. The clerk said that they are getting out of vaping and everything is on sale. I was surprised to see replacement tanks for a full size Nautilus. So I bought two plain glass tanks and two tanks with the cut-out metal cover all for $11.96 !! I haven't used the Nautilus in several years, but might break one out just for old times sake.

Has anyone ever used a Nautilus on a mech mod? With a 1.6 ohm coil, you'd end up at 10 watts, which would be a fine tootle puffer. A 21700 battery would last a long time with that.

I was wondering if you could use freebase eliquid in the Caliburn G with the .8 coil using 18mg net eliquid. It seems to be working out fine now. I'm also wondering if a 70/30 blend would be better for the Caliburn G pods to prevent leaks but then I wouldn't get that throat hit, right? Will small drops of eliquid using 50/50 appearing on the bottom of the pod cause the Caliburn to have internal damage, which sometimes appear like condensation coming out which I simply wipe with a tissue? The condensation is very minimal. Has anyone tried using their Caliburn G this way? I was using 6mg eliquid but needed to up the level because it was too weak and I wasn't getting my proper nicotine fix. The reason I like the Caliburn G for net is because it mimics a cigarette a lot with the auto draw. Thank you in advance for your help.

For Sale: Lost Vape Therion Bottom Feeder with Evolv DNA 75 C Screen (rare)
Complete with box, extra bottles, and manual.

Price: $90

Condition: Very Good to Mint

Payment: PayPal or Check

Shipped when payment received or check clears.
Shipping to USA only.

Thank you for viewing.

Looking to get rid of some of my stuff before I move.

Verification: https://i.imgur.com/0MY6W5t.jpg



Mods:

• Dovpo Topside Dual - Black/Gray Splatter - Sealed - $65

GONE:

• Dovpo Topside 90W - Black & Blue/Gold Splatter - Sealed - $OLD
• Dovpo Topside 90W - Black & Blue/Gold Splatter - Sealed - $OLD
  
• Dovpo Topside SQ - Black - Sealed - Comes with extra unused bottle - $OLD
  
• Vandy Vape Pulse v2 - Rainbow Resin - Used Lightly - $OLD
  
• Lost Vape Grus - Puzzle - Sealed - $OLD
  
• Dovpo Topside Replacement Bottle (x2) - Sealed - $OLD
• Asmodus C4 - Purple - USED - $OLD
• Asmodus C4 - Green - USED - $OLD

---------------------

Trades:

Potentially could be interested in higher-end MTL RDAs too, but I'm pretty picky with it as I have most of the stuff I want.

---------------------

Can let you know how much shipping is once you message me based on weight/distance.

Can take Cashapp/Venmo/Zelle.

I cannot take PayPal. My PP is setup through my business and I cannot take personal sales on there. I hope you can understand. I have a very active trading profile on reddit that I'd be happy to link to you to provide some proof.

Plus try our Zip Code Checker to confirm shipping options!

Use code BlackFriday at ejuice.deals for an immediate 30% discount sitewide!

Thanks for your support - we know the industry is under attack, and we greatly appreciate your support over the years. We are here to take care of all your needs!

The OXVA Vativ Super Mod is a convertible AIO to 510 single battery mod, but unlike others that have come before it, this has to be one of the easiest systems to convert.

The OXVA Vativ Super Mod - CHAPTERS

00:00 - Intro and specs
03:03 - Close up
17:52 - Temp Control & Wattage Vape
20:18 - Thoughts


Login to view embedded media

...is a brief video I made a while back that I hope you will enjoy.

Login to view embedded media

Today we are going to take a closer look at the Target 80 from Vaporesso. It has a triangular, cage-like frame, which makes it stand out from other vape mods. When it comes to the 80W, you may think of the Target PM80. What are the differences between them? Let check it out in this review.



Mod:
The Target 80 has a 3000mAh built-in battery with 5-80W output power and 3 output modes: VW/PULSE/F(t) Mode. Its rugged appearance outside and the professional Axon Chip inside are combined perfectly to provide an awesome DTL vaping experience outdoors.

Tank:
The GTX 26 Pod Tank has a 5ml e-juice capacity. It is composed of GTX 26 Pod and 510 Adapter. Such a design allows you to use the Target 80 with this Pod tank, or with any 510 threaded tanks.

The pod is compatible with all Vaporesso GTX series coils so you can find a coil that suits you better.

Besides, there is a bronze ring around the 510 connector. It has an opening that allows you to put the Target 80 on a chain, or even on a key ring.

What You Can Get From Vaporesso Target 80 Box Kit?
1 x TARGET 80 MOD
1 x GTX 26 POD TANK
1 x GTX 0.2Ω MESH Coil (In-Box)
1 x GTX 0.3Ω MESH Coil (In-Box)
1 x Type-C Cable
1 x User Manual
1 x Warranty Card

Vaporesso Target 80 vs Vaporesso Target PM80


Learn More:
Vaporesso Target 80

ElegoMall provides worldwide shipping and competitive price for all the customers, register on ElegoMall now to get your new user coupon and enjoy better price of more latest vape kits.


And for any inquires of Vaporesso wholesale or any vape wholesale in China, feel free to contact ElegoMall.

Joyetech eGo Air Kit's lightweight appearance resembles a real cigarette and is designed exclusively for MTL vaping. Meticulously picked for its mouthpiece, it opts for two choices that retain 510-mouthpiece and filter on top, relying on automatic inhalation. First and foremost, it emphasizes the flavor in your mouth and recommends a higher concentration of nicotine. eGo Air accommodates a 2ml capacity tank and is easy to refill via the way of opening the silicone plug on the side. Consuming the e-juice and utilizing a 1.0ohm mesh coil to evenly heat. It provides a long-lasting taste restoration in your mouth. Powered by the 650mAh built-in battery and have been promised to charge for 1 hour fully charged, which results in a long run.




Features:
1. Resemble A Real Cigarette
2. For MTL Vaping
3. 510-mouthpiece And Filter On Top
4. Automatic Inhalation
5. 1.0ohm Mesh Coil
6. 2ml Capacity Tank
7. 650mAh Built-in Battery
...

Click here for more:

Joyetech eGo AIR Kit: Joyetech EGo AIR Kit

Joyetech is proud to introduce a compact starter kit called the Joyetech eGo Air (All-in-one) designed for beginners or users looking for a new lightweight setup. Joyetech eGo Air features a tank and a built-in battery also known as the "All-in-One" design. This "All-in-One" design combines a very slim compact shape with the very convenient battery and eGo Air Pod Cartridge.

The vape Joyetech in USA eGo Air features the Leak-Resistant Cup technology from the Cubis and adds a child-lock feature. The tank is also conveniently filled from the top. The Joyetech eGo Air has a built-in battery with a capacity of 650mAh and comes in various colors. The Joyetech eGo Air can be charged via Micro USB Cable which is included. You can also adjust the indicator light to either red, yellow, green, blue, indigo, white, or purple to match your own personal style and preferences.

The Joyetech eGo Air "All-in-One" Starter Kit is perfect for beginners looking to start vaping without being overwhelmed.You could use the discount code from Vape Shop Online Near Me, Best Online Vape Store For Sale to buy.

Features

• Resemble A Real Cigarette
• For MTL Vaping
• 510-mouthpiece And Filter On Top
• Automatic Inhalation
• 1.0ohm Mesh Coil
• 2ml Capacity Tank
• 650mAh Built-in Battery

Quick Link:

Joyetech eGo Air Pod Cartridge 2ml (5pcs/pack)
Joyetech eGo Air Pod System Kit 650mAh

This thread is for the general discussion of the Product Geekvape Obelisk 65FC: First Fast Charging Pod Mod. Please add to the discussion here.

This thread is for the general discussion of the Product Geekvape Obelisk 65: Tech Chic in Palm.. Please add to the discussion here.

This thread is for the general discussion of the Product Geekvape B100 (Aegis Boost Pro 21700): Boost Pro for pro experience.. Please add to the discussion here.

Freemax M Pro 2 and Old Version M Pro Tank are Freemax M Pro Series Sub Ohm Vape Tanks, while Freemax Fireluke M, Fireluke 2, and Fireluke 3 are Freemax Fireluke Series Sub Ohm Tanks. As for you, which vape tanks do you like best?

Both SS904L M Mesh Coils Series originally for M Pro 2 Tank and M Pro Mesh Coils Series originally for M Pro Tank can support M Pro Series Tanks. What’s more, Freemax M Pro RBA can also be compatible with M Pro Series Sub Ohm Tanks.

All of X Mesh Coils Series originally paired with Fireluke M Tank, TX Mesh Coils Series originally paired with Fireluke 2 Tank, and SS904L X Mesh Coils Series originally paired with Fireluke 3 Tank are able to support Freemax Fireluke Series Sub Ohm Tanks.



Both M Pro Series and Fireluke Series Tanks can provide users the best-vaping experience with good flavor, massive clouds, and coil longevity. As is known to us, Freemax vape devices are highly recognized by the market for their superior cloud, flavor, and coil longevity. So what’s your feedback on Freemax vape products? Do you agree?