• Locked
Freemax Onnix 2 15W - 100% Flavor Categories Compatible

Onnix 2 15W Kit is designed for high strength MTL vaping needs with OX coils series compatible, which is able to support all sorts of e-liquid categories with various VG/PG ratios in the market, both nic salt and freebase.

The compatible VG/PG ratio for nic salt e-liquid ranges from 5:5 to 4:6 to 6:4 and for freebase e-liquid from 7:3 to 8:2. Equipped with upgraded FM SaltCoilTech 3.0, Onnix 2 15W Kit is able to match 100% of flavor categories in the market.

OX DVC Coil 0.8ohm (Fruits Flavor Best)
OX DVC Coil 1.0ohm (Sweets and Deserts Flavor Best)
OX DVC Coil 1.2ohm (Menthol and Tobacco Flavor Best)

For more features of Freemax Onnix 2 15W Pod System Kit, please click here>> Onnix 2 15W Kit | Freemax - Taste the Clouds, Feel the Flavors!

niaTVaW.jpg
  • Like
Reactions: Javichu

  • Locked
First Look-Vandy Vape Jackaroo Mini Kit

Hey guys. Today let's check out the Jackaroo Mini Kit by Vandy Vape. It is the more portable edition of the Jackaroo Dual and comes with some new features. Here we go!

The Jackaroo Mini is quite a bit smaller but features the same appearance as its predecessor. Built with the latest Vandy Vape chipset, it can attain 128W of power which comes from two built-in dual 18650 batteries. This denotes that the total battery capacity comes in at 4000mAh, resulting in long vape times from a single charge. Nevertheless, charging is effortless and occurs via a micro USB port on the control face. You can also operate in a myriad of modes such as bypass, voltage, VW, and 3 TC modes (nickel, titanium, stainless steel). To change the settings, simply use the large full-color display with the two adjustment buttons. Safety-wise, the Jackaroo Mini has an integrated short circuit, overheat, low battery, open circuit, over-puff, and over-current protection system.
Vandy_Vape_Jackaroo_Mini_Kit_128w_1.jpg

If you buy the Jackaroo Mini Kit, you will also receive a tank, although not much info is available yet in regards to its specifications. However, we do know that the setup comes with a VVC 0.15ohm triple meshed coil that operates from 50 to 100W with freebase e-liquids. Plus there are many other compatible coils, but you must purchase these separately. The coil is very easy to install as it features a push/pull system, resulting in a mess-free process. To access the coil, simply remove the base and pull it out. Finally, the reservoir on the tank can hold up to 4mL of vape juice and is easily refilled via the flip-top cap. Adding e-liquid is as easy as pressing a physical button at the top of the reservoir that will disengage the mouthpiece and expose a decent-sized filling slot.

Get it here: Vandy Vape Jackaroo Mini Kit 128W

You may also like:
best dry herb vaporizer 2021
ltq vapor curer price

  • Locked
ULTON MELAMPOUS Chorus Style 22mm RTA

https://www.2fdeal.com/ulton-melampous-chorus-style-22mm-rta-4ml-silver_p16655.htmlULTON MELAMPOUS Chorus Style 22mm RTA 4ml
Login to view embedded media
d2095c4ac2.jpg.240x240.jpg

47ff84dbfb.jpg.240x240.jpg

12daa8ef12.jpg.240x240.jpg


Features
510 threading;
SS body + PMMA tank;
Faithful to MTL roots (2*0.8 flat);
low profile feeding;
noticeable thorat hit;
rich and smooth draw;
Mesh plates added in the wicking channels of the deck, where cotton lays absorbing
only the necessary liquid.Thus, the draw is dry and flavorful with a noticeable throat hit, while there`s no overwicking
rustling or gurgling.
Deck with two air holes of 0.8 mm below the coil
and AFC with three holes of 1.70 mm & two of 1.00 mm on each side

https://www.2fdeal.com/search/?Keyword=alieno&CateId=$49 ULTRONER Alieno 70W 18650 TC VW Box Mod(SEVO 70 Chip)
6b31500ec8.jpg



https://www.2fdeal.com/_p16624.html$24.9 SXK Duetto Lucido Style 22mm 316SS MTL RTA
Coupon Code:MAPLUCIDO

e4cca0d2eb.jpg

Features
510 threading connection
Material: 316 stainless steel
Diameter: 22mm
Type: Genesis Tank
Vape Type: MTL
Drip Tip: Steel
Liquid capacity: 2.5ml


https://www.2fdeal.com/search/?Keyword=stratum&CateId=Stratum Balance Style 60W TC Stablized Wood +SS 18350/18650 Mod
db4c8e8aba.jpg.240x240.jpg
a987adc112.jpg.240x240.jpg
dcbc4bae50.jpg.240x240.jpg

Features
PEI and ss material
Compatiable with 24mm diameter atomzier
Compatiable with 18350 /18650 battery (battery not included)

  • Locked
SMOK Thiner Pod System Kit Review 25W £19.99

Are you looking for the potable vape kit?The uk SMOK Thiner Pod System Kit is a card-style pod system kit.It is powered by the high-capacity of battery 750mAh to keep you vape the whole day.The gradient design of the body is very modern.Let's learn about its advantages.
SMOK_Thiner.jpg

Buy UK Vape Smok Thiner Kit is more creative and space-saving than common bulky vaporizers with card style. It features 750mAh battery capacity and power adjustment in a range of 5W to 25W, you can enjoy your personal vaping at your pace. The battery life, selected power, resistance, voltage and puff numbers will be showed on the 0.69 inch OLED screen. Thiner Kit comes with a refillable meshed 0.8ohm pod of 4ml capacity to bring continuous and great vaping for you.

We highly recommond placing an order if you want one of these.Please visit best online vape store uk.

SPECIFICATION
Size:88*43*10mm
Weight:47.3g
Battery Capacity:750mAh
Power Range:1W-25W
Input Voltage:3.3V-4.2V
Output Voltage:0.7V-4.0V
Standby Current:<50uA
Resistance Range:0.6Ω-3.0Ω
Charging Current:Max 0.9A
Charging Voltage:5V±0.2V
Over-charging Voltage:4.3V±0.05V
Over-charging Current:2.0A±0.6A
Over-discharging Voltage:2.4V±0.03V

Quick Link:SMOK Thiner Pod System Kit 750mAh 25W

  • Locked
New Arrival! Uwell Caliburn Koko Prime (Vision) Pod Kit

Uwell Koko Prime (Vision) Pod System Kit is constructed of PCTG & PC with translucent body and replaceable decorative panels. Uwell Koko Prime (Vision) Pod kit is powered by built-in 690mAh battery with 1.6A Type-C charging. Uwell Caliburn KOKO Prime (Vision) features draw-activated design, easy to operate. Uwell Caliburn KOKO Prime (Vision) cartridge has FeCrAl 1ohm coil, FeCrAI UN2 Meshed-H 0.8ohm coil, 2ml capacity with top filling design. Caliburn KOKO Prime (Vision) also is compatible with Caliburn G coils and can switch between MTL and DTL vaping. Uwell Caliburn KOKO Prime pod adopts Exclusive Patented Pro-Focs Flavor Testing Technology.

Caliburn-Koko-Prime-new-all-Kit-12.jpg

Caliburn-Koko-Prime-new-all-Kit-13.jpg


Main Features:
1. Compatible with Caliburn G pod and coils, cost-effective to use
2. Two different airflows when the pod is installed in different directions
3. Pro-Focs flavor testing technology to provide unparalleled vape experience
4. Translucent body to satisfy your curiosity, with futuristic cyberpunk style panel
5. Including a lanyard to free your hands and convenient to carry
...

Click here for more:

Caliburn Koko Prime (Vision) Kit: Uwell Caliburn Koko Prime

  • Locked
INNOKIN COOLFIRE Z80 WITH ZENITH II TANK REVIEWED BY BIGBOB2322

Hello again everyone and welcome back for today's review of the Coolfire Z80 kit that was sent to me for the purpose of this review. The Z80 Kit has been a long awaited item from Innokin that so many people including myself have been waiting for. The Z80 device has 3 power modes to choose from that include ( FO ) Fourier Tech just as the Sensis employs, wattage, and voltage as well as the coil saving refresh function but the Z80 uses a replaceable single 18650 battery to power the device. Included with the Z80 is the new Zenith II tank that can work with every Z-Coil. Without giving to much away right now lets get to know the Coolfire Z80 and Zenith II tank before the review.


COLOR CHOICES


InnokinCoolfireZ80Kit20210524_8.jpg



IN THE BOX ( THE 2 BOXES OF COILS ARE NOT INCLUDED )


1pc Coolfire Z80 Mod (Single 18650 not included)

1pc Zenith II Tank (0.8ohm MTL Coil installed)

1pc Spare Z 0.3ohm RDL Coil

1pc Spare Clear Glass Tube (5.5ml)

1pc Spare Zenith II Tank RDL Drip Tip

1pc Spare O-Rings Set

1pc Type C charging cable

1pc Quick Start Guide


Innokin is helping to try and save the environment by packaging everything in paper so it biodegrades back to it's natural form, no plastic is used at all in packaging.


20210625_153621.jpg









SPECIFICATIONS


Coolfire-Z80-Kit-19.jpg



FO ( FOURIER TECH )


InnokinCoolfireZ80Kit20210524_2.jpg



REPLACEABLE SINGLE 18650 BATTERY


InnokinCoolfireZ80Kit20210524_6.jpg



INSTANT FIRE OF COIL


InnokinCoolfireZ80Kit20210524_7.jpg



REFRESH MODE ( EXTENDS COIL LIFE )


InnokinCoolfireZ80Kit20210524_3.jpg



PERFECT COMBINATION OF DEVICE AND TANK


InnokinCoolfireZ80Kit20210524_1.jpg



NEW ZENITH II TANK


InnokinCoolfireZ80Kit20210524_4.jpg



COMPATIBLE WITH EVERY Z-COIL


InnokinCoolfireZ80Kit20210524_5.jpg



InnokinKromaZCoil20201208_1.jpg



ZENITH II TANK COLORS


zen2tank-colours.jpg



ZENITH II TANK FEATURES

* Easy twist top fill, 5.5ml e-liquid capacity.

* Changeable 510 drip tip and glass tube.

* Precise airflow control for both MTL and RDL.

* Compatible with all Z Coils (The tank comes with 0.8 ohm and 0.3 ohm Z coil )



ZENITH II TANK SPECIFICATIONS


* Superior 304 Stainless Steel Tank Construction

* 51.7*26mm

* Pyrex Glass Reinforcement

* Threaded Glass Locking Ring

* 5.5ml Tank Capacity

* Resistance range: 0.1ohm-3.5ohm

* Thread type: 510 thread

* Twist Top Fill System - Reveals Fill Port

* Spring Loaded Leak Prevention System - Clean Coil Changes



MANY BOTTOM AIRFLOW CHOICES (MTL, RDL, DL, )


E49bCHeUUAARQDs



FIRST IMPRESSIONS


When I opened the box containing the Z80 device and Zenith II tank I was impressed with the material used on the spine of the Z80, it really looks and feels like genuine Alcantara with some spongey feeling to it. Both tank and device are cast in a matt grey that leave no fingerprints and match one another very well. The knurling on the tanks top cap adds a bold look that carries down and matches with the bottom of the tank.

After looking the Z80 over I came to a realization that as much as I dislike branding on devices and atomizers because I feel it takes away from their appearance, the branding on the Zenith II tank and Z80 device actually enhance the appearance of both of them. The branding is actually engraved on both very boldly, one side of the tank Zenith II is engraved and the other Innokin is engraved while the Z80 has Coolfire Z80 on one side and Innokin on the other. Both the tank and mod match up very nicely, I'm not a big fan of the material Ultem that is used in tank or drip tip applications but in this case the Ultem drip tip pairs well with the tank and mod combination.




As I always do with any new atomizer I disassembled the Zenith II fully preparing it for a soak in soapy warm water. When doing so pay special attention to the 2 O rings at both ends of the glass tube, I would put them aside because they can be easily lost down a drain.

The metal cage that surrounds the glass tube really protects the glass, a second protection of falls comes with the knurled top cap that protrudes a small amount so if a fall did happen the top cap would make contact before the glass. The bottom base cap that has the airflow selector slot also has knurling that protrudes out a small amount.

A great feature of the Zenith II is any Zenith coil is compatible, so if you have a favorite Zenith coil other than the 2 that are provided they will work also.

Installing the coil is a simple push in, line up the 2 flat sides and just push the coil into the tank, I like to prime the coil with a couple drops of juice first. after filling the tank let it sit for 5 or 10 minutes to fully saturate the coil.

This 5.5ml tank uses top fill and it's one of the simplest ones to use. On the top cap a lock symbol is located on the left with a unlock symbol located on the right, to fill turn the top cap counterclockwise toward the unlock symbol that when opened reveals a membrane that acts like a one way valve, I wish this fill method was used on all tanks.

Pushing your juice bottle tip into the membrane opens it up for a mess free fill then seals itself back in place when the bottle tip is removed. When finished filling turn the top cap clockwise to the lock symbol, it doesn't get any easier than that. If your juice bottles are the 100ml ones you might have to remove the drip tip prior to filling to ensure the bottle tip fully penetrates the fill port membrane. I'm also happy to see that the drip tip is a narrow bore straight drip tip and not the old styled curved type of MTL drip tip.


20210625_161917.jpg



The Z80 uses a replaceable 18650 battery the is installed using a twist off battery cap located on the bottom of the device, lift up the tab and unscrew to install the battery. There are 4 holes in the battery cap for venting. Threading is very smooth with no crunchiness at all.

20210625_174237.jpg



Battery polarity is clearly marked with a red plus symbol indicating positive position of the battery inside the tube, the battery cap however does not have any negative markings or symbols.


20210625_175755.jpg



The spine of the Z80 is covered with either leather or like the one that I have, a material that really looks and feels like Alcantara with the Fourier logo stamped in. 2 rows of stitching run vertical from top to bottom on each side of the Fourier logo. This material is very strong and durable and it also cleans up easily with water using a damp cloth.


20210627_074930.jpg



The gunmetal matt finish of both the tank and device really give the combo a bold robust and well built look and feel, as I mentioned earlier the branding on the tank and device actually add to their majestic appearance. The fire button is raised just enough to feel and is surrounded with a gold bezel further enhancing the elegant look.

I prefer to thumb fire my devices and the ergonomics of the device let it cradle in the hand and your thumb just naturally lines up with the fire button, if you prefer a finger method that same ergonomic feel is there except the display screen will be covered.


20210627_075206.jpg



Going back to the Zenith II I have to mention how well the airflow works and the options that you have with it. I've said it before and I'll say it again many manufacturers claim to be able to be able to get a MTL and RDL vape from their tanks but very few are actually able to accomplish, but the Zenith II does it very well.

On the tank there is a series of 3 individual holes that vary in size along with a slot for DL or RDL. Adjustments can be made to use in MTL by using either the largest hole, the largest hole and another smaller hole together, or all three holes opened together.

You can also use all three holes and a good potion of the slotted airflow opening together. the airflow control ring has just the right amount of resistance and stays in place when set.

This is a true MTL tank as well as a very good RDL or even DL, I include DL even though the Zenith II is not billed as a DL but if I can breath through it fully opened up which I can I label it capable of DL also. Pictured below, all 3 individual MTL holes are opened up.


20210625_193249.jpg






The Z80 device is such a easy device to navigate through using it's easy menu system using only a couple of button combinations that I will list below.

* Turning the device on/off - 3 presses of the fire button

* Locking/Unlocking wattage - Hold the fire and down button simultaneously

* Clearing the puff counter - Hold the fire and up button simultaneously

* Getting into the menu - Hold both the up and down button simultaneously

Once in the menu scroll down/up to the desired function yo want to adjust or use

* To change wattage/Voltage hold the plus/minus button down for 1.5 seconds, the wattage will begin to blink, only when blinking can you adjust wattage/Voltage.



The display screen is bright and vivid and lets you choose to use it in it's full information mode that Innokin calls pro or the other mode they call minimal. In it's pro mode all information is displayed. Information is as follows left to right and top to bottom.

* Power mode
* Battery bar
* Wattage/Voltage
* FO/Wattage/Voltage
* Seconds puffed
* Ohms
* Puff counter
* Volts/HZ



20210627_063746 (1).jpg



If using the Z80 in Fourier mode ( FO ) the display looks like this


20210626_114442.jpg



POWER MODES


* Wattage - Power output up to 80 watts

* Voltage - Power output up to 7.5 volts

* FO ( FOURIER TECH ) - Alternating current that use frequencies in a waveform
* MTL - ( 51-100 HZ )
* DL - ( 20-50 HZ )



REFRESH SETTING


The Z80 uses 2 settings to help prolong the life of the coil, how it works is done by gently heating the coil by 40% and then vibrating to shake any gunk build up from juice that forms on the coil wire.

* Setting 1 - In setting 1 the coil is cleaned for about 5 seconds by pressing the fire button while your in this setting.

* Setting 2 - Called Extended because the cleaning process is longer, in the extended mode you have to hold the fire button down until the wheel that's shown on the display screen gets a full cycle.



FOURIER TECH ( FO )


Trying to explain ( FO ) is a bit difficult but I'll do my best. What all of us are used to in wattage/voltage mode is ( DC ) which is a straight signal, in the ( FO ) mode the device is using a A/C signal ( ALTERNATING CURRENT ) with different waveforms called HZ.

Using the different HZ will change the flavor on juices to bring out different notes with different settings, because all juices are different not one setting works for all juices.

A lot of adjusting of HZ is needed when changing flavors, I call it a tinkerer's dream.

What I have found is in ( FO ) mode the flavor kind of mellows out to a softer one. I am a heavy vaper and at the end of some days even my favorite juice flavor seems a bit harsh and irritating and that's when I like to use the ( FO ) mode.


FINAL IMPRESSIONS


I'm sure that all of you can tell that I really like the whole kit. Going over the tanks strong points, attractive bold appearance , very good flavor using both of the supplied coils. The 0.8Ω coil has just the right amount of warmth and throat hit with airflow that is a true MTL airflow that can be opened to the largest MTL setting and even use some of the slots airflow mixed in. It should make every style of MTL vapers happy.

The 0.3Ω mesh coil is a great flavor coil and using it as I do in RDL with the airflow closed down 1/4 gives me a great vape of flavor and clouds. The provided drip tip works fine so I kept it on during the testing.

I'm so glad the Z80 uses a replaceable single 18650 battery because as good as built in's are they will die at some time, but the Z80 will power on.

As good as the whole kit functions the appearance is the real star, perfectly paired tank and mod in color as well as style form makes it a real eye catcher. The little things like the spirals in the fire button as well as the gold bezel that surround it make it stand out in a crowd.

Having a simple and easy to navigate menu system also adds to all the positives in this device.

The Z80 has the FO feature as does the Sensis that I reviewed as well and for someone that has a lot of time to play with the settings the FO power mode should be fun discovering new frequencies.

All in all I really love this whole kit and 100% recommend it.

I would like to thank Monica and Innokin for sending the Z80 Kit for review and another thank you for the 2 boxes of Z-coils as well.

THANK YOU
BIGBOB2322

  • Locked
Freemax Marvos T review

Here's my review on the Freemax Marvos T, this was sent to me by Freemax for this review.

I've had this kit for a little over a month now. I have to say that it's a pocket-friendly and straightforward to use kit that has a 3000mAh internal battery. Inspired by the Fireluke the flavour on the Marvos T can rival any subohm tank on the market.

What's Included:

1 * FreeMax Marvos T80W Battery 3.000mAh
1 * 4.5ml Pod
1 * MS Mesh Coil 0.15Ω Output Power 60-70-80W
1 * MS Mesh Coil 0.25Ω Output Power 40-50-55W
1 * Type-C cable for charging
1 * Warning Card
1 * User Manual

Features and Specifications:

Material: PCTG, FeCrAl, zinc alloy + ABS
• Weight: 126.8 g
• Dimensions: Ø27.3 x 125.55mm
• Pod capacity: 4.5ml (plastic), 4ml (glass)
• Coil: MS Mesh (Tea Fiber Cotton Formula + Mesh SS904L)
• Battery capacity: 3000mAh
• Charging Port: USB-C 2A
• Output power: 20-80W 3 adjustable power settings (Low, Medium, High)

The Freemax Marvos T is an elegant tube shape pod available in gray, black, blue, red.

Pod/Battery

On the top of the device, there's an adjustable airflow control ring that is knurled. On the opposite side of the button is a Type-C charging port.

The button is a nice size and very responsive. It takes 5 clicks to turn it on, 5 clicks to turn it off. The LED light is integrated inside the button. There are 3 LED colours for your battery indication that are shown when the device is firing: green (99 - 67), blue (67 - 33) and red (33 - 1). 3 clicks change the power/wattage level according to the coil that's in the pod. On the 0.15Ω coil: Red 60W, Blue 70W, Green 80W. On the 0.25Ω coil: Red 40W, Blue 50W, Green 55W.

Tank/Coils

The tank is available in PCTG (4.5ml) and glass (4ml). The circular pod is held into place by strong magnets. I dropped it on tile flooring by accident and the pod stayed on the device. It's tinted but you can easily see your remaining juice level. The Freemax Marvos T has a bottom fill silicone/rubber plug, you have to remove the pod from the device before being able to refill. The 810 drip tip is removable. Just make sure to get one with rings on the bottom.

Using the world-famous FM COILTECH 4.0 MS Mesh Coil in the Marvos T. The coils have been fused with 95% Tea Fiber Cotton and 5% Organic Cotton the same technology used in the Mpro2 tank and Fireluke 3. They're sold in packages of five.

These Freemax coils have great vapour/taste. They're simply continuing the tradition of flavorful and awesome coils that we've come to know and love from Freemax. I can see why they boldly claim the Marcos T to be better than the best sub-ohm tank, they're indistinguishable in flavour/taste from the competition.

Your attention to detail shows in your products, keep up the great work Freemax. I would gladly recommend this kit to all levels of vaping experience.

Thank you Freemax and thank you Tina for the opportunity to try out your product.
PXL_20210629_181258951.jpg PXL_20210629_181447171.jpg PXL_20210629_181459650.jpg PXL_20210629_181508698.jpg

  • Locked
Freemax Marvos T Review

PXL_20210629_181258951.jpg
PXL_20210629_181447171.jpg PXL_20210629_181459650.jpg PXL_20210629_181434666.jpg PXL_20210629_181508698.jpg

Here's my review on the Freemax Marvos T, this was sent to me by Freemax for this review.

I've had this kit for a little over a month now. I have to say that it's a pocket-friendly and straightforward to use kit that has a 3000mAh internal battery. Inspired by the Fireluke the flavour on the Marvos T can rival any subohm tank on the market.

What's Included:

1 * FreeMax Marvos T80W Battery 3.000mAh
1 * 4.5ml Pod
1 * MS Mesh Coil 0.15Ω Output Power 60-70-80W
1 * MS Mesh Coil 0.25Ω Output Power 40-50-55W
1 * Type-C cable for charging
1 * Warning Card
1 * User Manual

Features and Specifications:

Material: PCTG, FeCrAl, zinc alloy + ABS
• Weight: 126.8 g
• Dimensions: Ø27.3 x 125.55mm
• Pod capacity: 4.5ml (plastic), 4ml (glass)
• Coil: MS Mesh (Tea Fiber Cotton Formula + Mesh SS904L)
• Battery capacity: 3000mAh
• Charging Port: USB-C 2A
• Output power: 20-80W 3 adjustable power settings (Low, Medium, High)

The Freemax Marvos T is an elegant tube shape pod available in gray, black, blue, red.

Pod/Battery

On the top of the device, there's an adjustable airflow control ring that is knurled. On the opposite side of the button is a Type-C charging port.

The button is a nice size and very responsive. It takes 5 clicks to turn it on, 5 clicks to turn it off. The LED light is integrated inside the button. There are 3 LED colours for your battery indication that are shown when the device is firing: green (99 - 67), blue (67 - 33) and red (33 - 1). 3 clicks change the power/wattage level according to the coil that's in the pod. On the 0.15Ω coil: Red 60W, Blue 70W, Green 80W. On the 0.25Ω coil: Red 40W, Blue 50W, Green 55W.

Tank/Coils

The tank is available in PCTG (4.5ml) and glass (4ml). The circular pod is held into place by strong magnets. I dropped it on tile flooring by accident and the pod stayed on the device. It's tinted but you can easily see your remaining juice level. The Freemax Marvos T has a bottom fill silicone/rubber plug, you have to remove the pod from the device before being able to refill. The 810 drip tip is removable. Just make sure to get one with rings on the bottom.

Using the world-famous FM COILTECH 4.0 MS Mesh Coil in the Marvos T. The coils have been fused with 95% Tea Fiber Cotton and 5% Organic Cotton the same technology used in the Mpro2 tank and Fireluke 3. They're sold in packages of five.

These Freemax coils have great vapour/taste. They're simply continuing the tradition of flavorful and awesome coils that we've come to know and love from Freemax. I can see why they boldly claim the Marcos T to be better than the best sub-ohm tank, they're indistinguishable in flavour/taste from the competition.

Your attention to detail shows in your products, keep up the great work Freemax. I would gladly recommend this kit to all levels of vaping experience.

Thank you Freemax and thank you Tina for the opportunity to try out your product.
  • Like
Reactions: Freemax_Jerry

  • Locked
Ehpro Raptor \ Coil compatibility \ RBA question

Hello there!
Need some help from Ehpro\Horizontech users.
I've just found Ehpro Raptor on the far shelf and going to give it a try, but I wonder what coils are compatible. Looked through that big table of coils compatibility, looks like Ehpro Raptor uses same coils like Horizontech Falcon, but I can't get it. And finally - is there an RBA compatible? Some say TFV8 will do, but I'm not sure.
That's it, thanks in advance!
  • Like
Reactions: Superuser187

  • Locked
Preview: Freemax Onnix 2 15W Pod System Kit 900mAh

Freemax Onnix 2 15W Kit is a 15W compact pod system with 2ml pod and smart battery with automatic resistance recognition for high-strength MTL vaping needs. Freemax Onnix 2 15W Kit adopts a new generation of UV transfer technology and achieves a perfect overlay effect of different optical films and coating textures, therefore the kit is featured with higher reflection performance for more variable pattern effects. Powered by a 900mAh internal battery with Type-C and 1.5A fast charging, just take 60 minutes to charge from 1% to 100%, Onnix 2 15W Kit always has the power you need for a full day's use. Onnix 2 15W Kit is upgraded with three hidden white battery light indicators (integrated with the surface) for better battery indications. It’s quite easy to read the remaining capacity. The draw activated or button activated is very convenient to use. Onnix 2 Pod has an e-liquid capacity of 2ml, which is super easy to refill and the strong magnets ensure a quick and perfect match. Featuring FM SaltCoilTech 3.0 technology, OX DVC series Coils uses a dual vertical coil and tea fiber cotton formula, bring a strong throat hit and intense nicotine satisfaction, the 100% flavor categories for Nic Salt & Freebase E-liquids. Onnix 2 15W Kit is perfect for MTL vaping and born for high strength: 6-12mg freebase & 20-50mg nic salt.


Parameters:
Size: 15.3* 24.4* 109mm
Material: Aluminum Alloy & PET & PCTG
Battery: built-in 900mAh battery
Output: 7W-15W
Output Voltage: 3.6V-4.2V
Charging Time: 60 mins
Capacity: 2ml
Resistance: Freemax OX Mesh 0.5ohm Coil(16-20W)
Freemax OX DVC 0.8ohm Coil(12-15W)
Freemax OX DVC 1.0ohm Coil(9-13W)
Freemax OX DVC 1.2ohm Coil(9-13W)/ 1.5ohm

Features:
Stylish Panel, New UV Transfer Technology
Internal 900mAh battery with Type-C Fast Charging
Draw Activated & Button Activated (3 clicks lock-up button)
Upgraded Light Indicators: 0-35% one white battery light, 36-70% two white battery lights, 71-100% three white battery lights
Perfect for MTL vaping
2ml Capacity, Side Filling Design
FM SaltCoilTech 3.0: Dual Vertical Coil and Tea Fiber Cotton Formula
OX DVC Coil 0.8ohm & 1.0ohm & 1.2ohm

Packages:
1* Freemax Onnix 2 Battery
1* Freemax Onnix 2 POD (Freemax OX DVC Coil 0.8ohm pre-installed)
1* OX DVC Coil 1.0ohm
1* Type-C USB Charger
1* Warning Card
1* Warranty Card
1* User manual

----------------------------------------
IN STOCK: Geekvape L200(Aegis Legend 2) 200W Starter Kit with Z sub ohm 2021 Tank 5.5ml
IN STOCK:Geekvape L200(Aegis Legend 2) 200W Box Mod
New Arrivals
Clearance
Daily Deals
Box Mods
IN STOCK VAPE DEVICES
$0.01-$19.99 Cheap Deals
Coupon Codes
Free Shipping vape devices
  • Winner
Reactions: Resistance

  • Locked
Review Geekvape Obelisk Series:Obelisk 60,Obelisk 120 and Obelisk 200

Do you know what the Geekvape Obelisk series incluedes?

Geekvape Obelisk series maintains Geekvape Obelisk 120 FC Kit, Geekvape Obelisk 60 Pod Mod Kit and Geekvape Obelisk 200 Kit.


Geekvape Obelisk 200 Kit
Geekvape Obelisk 200 Starter Kit is the smallest dual 18650 battery mod with childproof tank. Geekvape Obelisk 200 kit consists of Geekvape Obelisk 200 box mod and Obelisk tank.

Geekvape Obelisk 200 Box Mod, constructed of Aluminium, is the smallest dual 18650 battery mod. In order to beauty, Geek vape Obelisk 200 mod adopts CMF design on stunning surface decors for light-refracting, color and texture displaying effect. Powered by dual 18650 batteries, Obelisk 200 can fire up to 200W output. And Geek vape Obelisk 200 is applied a magnetic design on the battery cap to remove or click back for battery replacement easily.
Geekvape Obelisk Tank features lift and slide top cap for childproof and compatible with Geekvape Z Series Coils. Obelisk Tank, constructed of SUS303, has replaceable 810 drip tip and 5.5ml capacity with top filling design. Geekvape Obelisk sub ohm tank support bottom airflow adjustment.



Geekvape Obelisk 60 Pod Mod Kit
Geekvape Obelisk 60 Pod Mod Kit is powered by 2200mah built-in battery to support two days vaping and can fire up to 60W output. Geekvape Obelisk 60 Pod Kit features intelligent Power-control chip for incredible flavor. And Geekvape Obelisk 60 can show clear vaping information by 0.96 inch TFT color screen. Geekvape Obelisk 60 cartridge has 4ml capacity and is compatible with Geekvape P Series Coils with top airflow system for massive cloud.



Geekvape Obelisk 120 FC Kit
Geek Vape Obelisk 120 FC Z kit consists of Obelisk 120 FC Mod and Z Tank(Zeus Tank). Geekvape Obelisk 120 FC Mod is powered by built-in dual-cell battery(2* 1850mah) with max 120W output. And Geekvape Obelisk 120 FC Z kit supports 15-min fast charging by 65W PD Charger and enables to charge other devices as well. Obelisk 120 FC Box Mod offers Power/ TC-SS/ TCR/ VPC/ Bypass/ OTG modes to meet different needs and is equipped with 0.96 inch TFT Color screen to show vaping information. Geekvape Zeus tank comes with 26mm diameter and 5ml capacity with top filling design. Geekvape Zeus tank features direct top airflow and the top-to-bottom airflow for massive flavor and vapor boost without leakage. And Zeus Sub-ohm Tank adopts slide coil design, easy to replace coils.

Which one do you prefer? Welcome to tell us on the below comment.

Blog: Do you know Geekvape Obelisk Series?

----------------------------------------
IN STOCK: Geekvape L200(Aegis Legend 2) 200W Starter Kit with Z sub ohm 2021 Tank 5.5ml
IN STOCK:Geekvape L200(Aegis Legend 2) 200W Box Mod
New Arrivals
Clearance
Daily Deals
Box Mods
IN STOCK VAPE DEVICES
$0.01-$19.99 Cheap Deals
Coupon Codes
Free Shipping vape devices

  • Locked
Freemax Onnix 2 Kit Preview-Born For High Strength

Hey guys. Today let's look at the Onnix 2 Kit by Freemax. If you are looking for a portable and professional MTL device, this is exactly what you want. Here we go!

Freemax Onnix 2 is a compact 15W pod system with automatic resistance recognition for high-strength MTL vaping needs. It adopts a new generation of UV transfer technology and achieves a perfect overlay effect of different optical films and coating textures, therefore it is featured with higher reflection performance for more variable pattern effects. Powered by a 900mAh internal battery with Type-C 1.5A fast charging, the Onnix 2 always has the power you need for a full day's use and just takes 60 minutes to charge from 1% to 100%. Moreover, the Onnix 2 is upgraded with three hidden white battery light indicators for better battery indications.
Freemax_Onnix_2_15W_Kit.jpg

As for the Onnix 2 Pod, it has an e-liquid capacity of 2ml, which is super easy to refill and the strong magnets ensure a quick and perfect match. Featuring FM SaltCoilTech 3.0 technology, OX DVC series Coils uses a dual vertical coil and tea fiber cotton formula, bring a strong throat hit and intense nicotine satisfaction, the 100% flavor categories for nic salt & freebase vape juice online. All in all, the Onnix 2 Kit is perfect for MTL vaping and born for high strength: 6-12mg freebase & 20-50mg nic salt.

Check for more details here: Freemax Onnix 2 15W Pod System Kit 900mAh

You may also like:
cheap freemax onnix 20w
suorin air pro price

  • Locked
Freemax Onnix 2 15W or Onnix 20W, Which Do You Prefer?

New Onnix 2 15W Kit is a 15W compact pod system for high-strength MTL vaping needs, however, Freemax Onnix 20W Kit is a 20W compact pod system for both MTL and RDL vaping needs.

The Onnix 2 15W Kit comes with OX DVC Coil 0.8ohm & 1.0ohm, and Onnix 20W Kit is equipped with OX Mesh Coil 0.5ohm & OX DVC Coil 1.0ohm. But these four types of vape coils can be compatible with both Onnix 20W and Onnix 2 15W Kit.

68XHXBz.jpg


Can you find any differences and similarities between Onnix 20W and Onnix 2 15W Kit?

Here are the main features of the Onnix 2 15W Kit:
FM SaltCoilTech 3.0 - OX DVC Coil
100% Flavor Categories Compatible
Draw Activated or Button Activated
Real 900mAh Internal Battery, Type-C USB Port and 2A Fast Charging
2ml E-liquid Capacity, Refill at Ease
Stylish Panel Options
Upgraded Light Indicators
OX Platform

Here are the main features of the Onnix 20W Kit:
Dual Airflow Mechanism for RDL & MTL Vaping Needs
3-level Adjustable Power Output
Draw Activated or Button Activated
Real 1100mAh Internal Battery, Type-C USB Port, and 1.5A Fast Charging
3.5ml (2ml TPD) E-liquid Capacity, Refill at Ease
100% Flavor Categories Compatible

For more information about Freemax Onnix 20W Kit, please click here>> Onnix 20W Kit | Freemax - Taste the Clouds, Feel the Flavors!
  • Winner
Reactions: Resistance

  • Locked
Joyetech EVIO Pod Kit - Long Life EN Coils

Today is anew released small pod kit from Joyetech. That's Joyetech EVIO pod. The outline and the way to adjust the airflow may remind you of Caliburn KOKO Prime, so let's check anything new it got!

Joyetech EVIO come with more poweful battery to meet your daily vaping needs better in such a portable size.

Joyetech-EVIO-Box-Pod-Kit_01_tbhWt.jpeg


Main Features:

1. Translucent side-filling cartridge, rotating it to adjust airflow
2. EN coils with boosting flavor & long-life span & smart coil protection
3. 1000mAh built-in battery, adjustable 3 levels of output power
4. Made of Zinc Alloy/PC material, elegant and comfortable grip

Learn More: (Login first to check better wholesale price)
EVIO Kit

Elego provides the most competitive wholesale price for all the vape devices, login to check more latest vape kit with better price!

For any questions about Joyetech wholesale or any vape wholesale in China, feel free to contact us.

  • Locked
Vandy Vape Jackaroo Mini Kit | Joyetech EVIO Box Kit

Vandy Vape Jackaroo Mini Kit

Jackaroo Mini Kit is the mini version of Jackaroo Kit with ergonomic design and small size for comfortable holding. It is powered by dual 18650 built-in rechargeable battery which is equal to 4000mAh cell. With IP67 waterproof, shockproof and dustproof, there is no need to worry about rains or dropping by accident. The upgraded Vandy Chip enables Jackaroo Mini to provide you different modes of Power/Bypass/Voltage/TC-NI/TC-SS/TC-TI, and some safety protections are also available for Jackroo Mini. It is equipped with a 4ml tank atomizer that is compatible with VVC series coils.

Details:

1. Waterproof, shockproof, dustproof
2. 4000mAh cell equal to dual 18650 batteries
3. Ergonomic and small for comfortable holding
4. Powered by an upgraded Vandy Chip with max power 128W
5. Power/Bypass/Voltage/TC-NI/TC-SS/TC-TI mode
6. Adopts 0.15ohm triple meshed coil
7. Compatible with VVC Coils
8. Easy coil replacement, top filling design
9. Safety protections: Short Circuit/Open Circuit/Over-heating/10S Cut-off/Low Battery Warning/Overcurrent Protection





Joyetech EVIO Box Kit

EVIO Box Kit comes with portable and compact design by using AST steel technology. Joyetech EVIO Box kit features built-in 1000mAh battery and charged via USB Type-C. EVIO Box is designed with LED indicator to show three vaping modes: High, Medium and Low. Joyetech EVIO Box AIO Kit can provide a more stable experience. Joyetech EVIO Box Pod holds 2ml e-juice capacity. This cartridge is compatible with EN mesh coil (0.8ohm and 1.2ohm) for a longer service life. It also adopts primitive airflow design when inverting the cartridge. Explore Joyetech EVIO Box for more energy in a tiny size! Both PC Version and Zinc Alloy Version are available.


Details:

1. AST steel technology, portable and compact
2. Built-in 1000mAh battery, longer life-span
3. High/Medium/Low mode, powerful and stable
4. LED indicator shows vaping data clearly
5. 2ml refillable pod, also fit for EVIO C Pod
6. Compatible with Joyetech EN Mesh Coil
7. Turbo flash heating, firing up in 0.001s


  • Locked
Independence Day Vape Sale 2021 - Vapesourcing 12% Off Vape Deals

Hey, guys. Use our exclusive Independence Day Vape Sale (July 4th) above to get instant discounts in June 2021! Find the best cheap electronic cigarettes and vaporizer accessories on Vapesourcing. Hundreds of coupons and promotions are available!
banner.png

This time the great sale starts from 29.06 and ends on 06.07. Also you can use the coupon code SALE12 to enjoy a 12% off discount on the whole site.

Meanwhile, there are also 4 direct discounts (the discount code cannot be used for the direct discount products, and the price will automatically change when the time comes), fast come and choose your favorite products in vape online shop!

Other kits we recommend:
caliburn pods in stock
caliburn vape in stock

  • Locked
GeekVape Obelisk 200 Kit - Light & Durable



Say hello to Geekvape Oblisk 200 Kit - the smallest 200W kit. Inspired by the essence of mind-blowing handiness. Packed in a CNC machined aluminum body, light and durable.
Powered by external dual 18650 batteries. Perfectly fits with Obelisk Tank, excels in both safety and flavor.

Geekvap Obelisk 200 mod features a portable design that makes it the perfect on-the-go companion. At 82mm tall and 48.5mm wide, with such half-palm size, it’s easy to carry around with you in one hand and enjoy big power when it’s time to chill out.

CNC Machined Aluminum Body, Revealing precise quality. The extraordinary portability is only possible thanks to CNC machining technique, one-step engraving a single block of aluminum. It makes Obelisk 200 so light and compact that it reveals a combo of precise beauty and structural quality.
Replaceable dual 18650 batteries make battery life not a problem and support massive performance up to 200W output. Miracles only happens in such a handy mod with double turbos!

With Obelisk Tank, Obelisk 200 Kit excels in both safety and flavor. It isdesigned to take full advantage of the childproof lock design and easy top-filling operation of the tank. The bottom airflow system equipped with Geekvape Z Series Coil enables Obelisk 200 to boost up flavor and create big clouds so easy, making it as powerful as it is portable.

More details for this Mod & Mod Kit check the link below
Geekvape Obelisk 200 Kit https://www.3fvape.com/50552-geekvape-obelisk-200-kit.html
Geekvape Obelisk 200 Mod https://www.3fvape.com/50556-geekvape-obelisk-200.html

Filter