Hi, despite all the info on the internet these days, I ve been unable to find an answer to what is the life use of a wire on a rta coil (not the cotton or liquids) before it gets exhausted and become a bad element to health, maybe to the point of releasing metal particles that could go into the lungs... I know this is highly relative and depends on what kind of wire, liquids and vaping frecuency, but if I give you a straight case, maybe I ll make a good relation between other materials and their durability. It happened that during 2020, with the pandemic on full first impact, importations were very slow and in some cases, closed for long periods of time, I was trying to get some imported wires but I didn't have enough luck to find those I needed, just very thin wire for mtl equipment, which I didn't have. All was sold out from vaping websites... I ve managed to get a Zeus X rta and with it, the included premade coils (I think these are Nichrome)... Thing is, I used the same (and only) metal coil for almost 6 months, obviously replacing the cotton when needed (I had all the other materials, bags of cotton Bacon, tools, fresh liquids, etc), the liquid I ve been using is Don Juan sweet tobbaco and reserve, from King Crest. In those six moths I didn't vape all days or weeks, since finding or importing liquids were also a problem, so confinement and the lack of products, push me to smoke again, sadly, but I didn't give up and I start to build again the coil meanwhile the purchases arrive from other countries. The metal coil doesn't seems to be exhaust in plain view, it gets datk or black, as normally should be after several days of use and when tasting a bit burnt, but once I clean up with a brush, water and some short dry burning when building again, it gets back its grey metal color, not the same shine as a new one, but close. My vaping frequency was sometimes in chain, due to anxiety, but not all day or days and I was careful to rebuilt often. Mods are one Aegis X and one Smok P3, wattage I use is between 40 and 60 because even if the coils can be auto detected and suggestion is 75w, this is always overrated and burning taste triggers in 3 days. Only thing I did notice was sort of a metal taste for a period of time, that after went away and never got back. If someone wants to drop an answer, be welcome please, thank you all...

$20.43 SXK Replacement Resin Panel Cover for BB 60W/70W Mod at FastTech - Free Shipping I slept on them and now I'm bummed out

Since I can't post in the Site Feedback and Help forum, I guess I'll post here (until a moderator is able to move it)

E-Cigarette Forum - Error
A server error occurred. Please try again later.

Yes dear ecf'ers there are some issues with ecf today
(no i'm not staff, just letting others know as I keep seeing posts about it throughout the forum)

There are quite a few server errors popping up all over the place
watched threads, certain boards and threads, pms/conversations, loading smilies, blogs
etc

there's been a few double posts of threads and posts

so yeah, please bare with ecf while it's throwing a tantrum

no it's not just you, no you're not being moderated by the staff...it's just the forum is having some issues today...

I'm getting a lot of errors trying to get into threads. My Inbox and all of my conversations are gone. I've been gone for a few weeks but jeez.

Has anyone heard about this? YouTube is deleting vape-related channels. I don't know if it was just DashVapes but he had some funny videos, really going to miss them.

I'm having a hard time figuring out what the strikes are for. I don't think it's for promoting links directly to vapor products because vapers know that is a no-no on youtube. Does anyone know anything more about this situation?

Hi all,

I'm hoping to keep my Zen Z2 system up and running, but I lost the switch button from my short throw Z2.2 switch kit.

Anyone have one sitting in a drawer somewhere or know where to find one? I'd take a switch button, a switch kit, or a full PV...

Shoot me an email at <myusername>@gmail.com
Thanks in advance!

Hello peeps...
I know they say we shouldn't pulse the stainless coils very much and I wonder how u guys clean the coils for a rewick??

I usually pulse them a bit and rinse with water 2times or something and they are cleaned..
Are u guys do the same with stainless?
Until now I pulse it lightly and rinse but takes many times to clean cause I don't pulse it much..
I was thinking tho that maybe it's still bad to pulse the SS coil many times to clean it...
What u guys do??

Hello all, new to forum and seeking help finding desired pod/flavor. I was a cigarette smoker for years. Finally turned to vaping a year ago. Started with Uwell and switched to Nord 2. I switched from vaping salt nic 25mg, regular, and 0 nicotine all while using 0.8 mtl coil. I never liked the RPM coils. Everything was fine till I bought a puff bar 2 weeks ago and now I'm hooked on the amazing flavor it gives! (Lush vanilla strawberry custard & UnoMas strawberry yougurt) It's a compact strong, sweet flavor. Now when I hit my Nord it seems too airy/flavorless, compared to disposable. I went out and purchased several strawberry juices for Nord (coastal clouds strawberry & cream & The Finest Strawberry Custard, etc) and none of them compare to disposable! I also enjoyed the smooth quiet hit from disposable compared to my Nord that makes a crackling noise. My question is: why does the disposable have so much flavor and is there a pod device I can purchase that will give the same effect? I'm not interested in a big device or big clouds. I prefer a more discreet one. Smaller, quiet, good battery. It seems maybe I need something with a tighter pull?
TIA

Hi everyone. I'm new here and wondering if anyone can help me out. I've been making my own juice now for 10 years and have bought my nicotine from Liquid Nicotine Wholesalers. Now, because of the awful new shipping law, only commercial businesses can buy from LNW. I'm having a hard time finding a comparable 100mg strength liquid nicotine. I've tried My Freedom Smokes, the flavor tastes like cinnamon. I've now tried Central Vapes and feel like it has a chalky taste to it. I used to buy All About Vapor's juices in Austin, TX and loved the flavor of their nicotine but want to make my own as it's a lot less expensive. Anyone have any recommendations on a good liquid nicotine? I sure would love some help.

Welcom to Efun.Top

Buy 2 Get 1 Free Now

For the Specific Products

Time:2021.5.25-6.1

Tips:Coupons Code on the Product’s Page

Customers must add the free quantity of items to your shopping cart.

With MTL and DTL drip tip and precision airflow control mechanism, there are four types of mesh coil options offered from 8W to 50W for both the Metal and Resin Edition of the Fireluke 22 Mesh Coil Tank. Which Kind of Mesh Coils do you want to have a try?

For DTL (Direct-to-lung) and RDL (Restricted Direct-to-lung) Vaping Needs:
Freemax DTL Mesh Coil 0.25ohm 30-50W Best 40W
Freebase 3-6mg, focus on vapor and flavor
Freemax DTL Mesh Coil 0.5ohm 15-30W Best 25W
Freebase 3-6mg, focus on vapor and flavor (Restricted Draw for the 0.5ohm)

For MTL (Mouth-to-lung) Vaping Needs:
Freemax MTL Mesh Coil 1.0ohm 10-15W Best 12.5W
Freebase 6-12mg; Nic Salt 20-30mg, focus on flavor and nicotine satisfaction
Freemax MTL Mesh Coil 1.5ohm 8-12W Best 10W
Freebase 12-18mg; Nic Salt 30-50mg, focus on throat hit and nicotine satisfaction



Main Features of Fireluke 22 Tank:
FM COILTECH4.0
DTL/RDL/MTL Vaping Needs
Child Resistant Top Fill Design
Leak-Proof Mechanism

Today we bring the Essent SE 80W Box Mod by ZQ Vapor


ZQ Vapor released this Essent SE Box Mod. It is a small box mod with a lightweight aluminum body, 80 watt variable board and powered by a single 18650 battery.
On May 19, ZQ presented on Instagram a new box mod for one battery - Essent SE 80W Box Mod. The device is crafted from ultra-light aircraft grade aluminum and stainless steel in four discreet colors. The design was endowed with a rectangular shape with a sharpened facade, a rounded back side and portable dimensions. On the front side, a familiar kit was placed - a round ignition button, a display, a pair of adjustment keys and a USB cable. The back was decorated with a cutout exposing the battery tube. The steel landing pad was provided with a reserve of 25 mm. A twisting lid with a small key was screwed to the bottom.
Features:
1. Adjustable Wattage 1-80W
2. Replaceable Battery Tube
3. External Single 18650 Battery
4. USB C Fast Charge Compatibility
5. 0.96 inch TFT Color Screen
6. 510 Atomizer Connector


Four colors now



Check more details of this 80W Essent SE Mod here >> Buy Authentic ZQ Essent SE 80W VW Vape Box Mod Full Black

The Hugsvape Sprint Pro kit is a DTL (Direct Lung) pod kit with variable coils. The main body is made of aluminum alloy-strong and lightweight. The appearance is almost the same as Uwell Caliburn G, but the top cover drip nozzle is slightly different.

Features
• Direct-to-lung Vape
• Integrated 690mAh Rechargeable Battery
• Max. Wattage Output: 18W
• Type-C Port
• 2ml Pod Capacity

The Sprint Pro Kit comes pre-installed with replaceable color lids and is compatible with Caliburn G and Caliburn Koko Prime liquid drippers. Allows you to personalize your Pod device. The fire alarm button has been changed to an easy-to-operate prominent button design, and the front panel has no unnecessary decorations, making it simpler.

Ribbed lines extending along the sides of the original are printed on the entire front and back of the Sprint Pro. These lines increase the grip of the otherwise slippery equipment. The kit is powered by an internal 690mAh battery and has a Type C charging function.

This makes Sprint Pro pod vape kit a category of vape for daily use, which can provide enough power for the day at work and the night afterwards. For such a compact and elegant device, Sprint Pro brings a strong and powerful blow-launching with a maximum power of 18W.

Other kits you may prefer:
vaporesso gtx go 40 kit for sale
vaporesso gtx go 80 kit for sale

VOOPOO Drag 3 Kit is the latest member of the Drag family, the return of the king. New upgraded Gene. Fan 2.0 chip, brand new TPP atomization system, innovative Super mode together form this dual battery mod kit. Drag 3 will be the ultimate solution for performance and ease-to-use. The elegant appearance is achieved thanks to the combination of soft leather and polished steel. Provide new color options. Not just obsessed with looks, VOOPOO has included the upgraded GENE.FAN 2.0 chipset, which means you'll experience a fast ramp-up for a responsive vape as well as access to innovative Super output modes. The upgraded GENE.FAN 2.0 chip uses two 18650 batteries to generate an astonishing 177 watts of power, which can make full use of any coil of the PnP coil series to provide delicious flavors from your favorite eJuice. VOOPOO Drag 3 Kit also breakthrough uses innovative coils and a new atomization system. With the help of Voopoo's self-proclaimed TPP atomization system, Drag 3 is born for big clouds! Innovative atomization tech will bring you bigger, smoother, and better flavor. In addition, the newly designed coil has a richer flavor than the PnP VM6 coil. Superpower, smooth & optimal flavor, ultimate fire speed, and more, all in Drag 3.



Features:
Elegant and Flamboyant Design
Leading, Again - Upgraded GENE.FAN 2.0 Chip
0.001s Extreme Ignition
Innovative Super mode+Smart/RBA/TC mode
Max 177W Output Power
Dual 18650 Batteries
New Coil Bring Better Flavor
TPP Atomization System
...

Click here for more:

Drag 3 Kit: VOOPOO Drag 3 Kit 177W With TPP Tank 5.5ml

Drag 3 Mod: Voopoo Drag 3 177W Mod

Login to view embedded media

Suorin original series <The Tough Life of Little CigMan> Part1 -- "Bloody Symphony"
What makes little cigman “dead”?
What will happen to cigman in our next episode?

Hey guys. Do you know the vape brand VGOD? Today I'm gonna introduce the VGOD Little King Kong which is a new disposable vape. Here we go!

VGOD Little King Kong has become quickly gaining the spotlight for its thrilling name, sleek appearance, powerful performance, and satisfying tastes. It looks like a mini baby bottle that can easily fit in your pocket and palm. The specially formulated flavors offer an outstanding taste that is sure to dance on your tongue and leave your mouth watering for more to come. It comes with a vape juice capacity of 6.5ml and 3% salt nicotine for satisfactory MTL vaping.

Powering the device is a 1000mAh battery, which is enough to deplete the last drop of e-liquid without any need for charging or complicated settings. Each Little King Kong delivers approximately 2000 puffs before disposal and operated via a draw-activated firing mechanism for quick and easy vaping; no need for any buttons. If you enjoy the satisfaction of disposable devices, where there isn't any mess, spills, or hassle some learning curve, then you'll fall in love with the new VGOD Little King Kong. For more discount disposable vapes, you can check vapesourcing online shop.

Get it here: VGOD Little King Kong Disposable Vape Kit 2000 Puffs 1000mAh

You may also like:
bang xxl vape
hyppe max flow website

https://www.2fdeal.com/search/?Keyword=Coilturd&CateId=Coilturd Style 24mm RDA w/BF Pin/2 Extra AFC Ring

Features
510 threading;
24mm diameter;
Single or dual coil option;
Squonk pin included;
2 extra afc rings for different airflow


https://www.2fdeal.com/_p16419.htmlVazzling Four One Five 415 Utima Style 22mm 316SS RTA Ultima

Capacity: 2.0ml
Top filling System
Juice control
Air flow under coil 0.9 mm x 2
MTL / RDL air flow ring
Single Coil Bridge

https://www.2fdeal.com/search/?Keyword=kalasag&CateId=Kalasag v2 Alpha Style 18650 Mechanical Mod Supports Parallel and Series Mode



Features
510 threading;
Fully mechanical;
Supported by 18650 battery (battery not included)
Supports Parallel and Series (Series kit is included)

https://www.2fdeal.com/search/?Keyword=engine&CateId=OBS Engine 100W 18650/20700/21700 VW Mod

Features
510 threading connection
Powered by 1 x 18650 / 20700 / 21700 battery (not included)
Max 100W Output
0.96 inch LED Screen
Zinc Alloy + Resin construction
Mod Size: 90 x 37 x 27mm
Power Range: 5~100W
Output Voltage: 1.0~8.4V
Charging Current: Type-C, 5V / 2A

Login to view embedded media
"*Guest: Cliff Douglas, Former VP, Tobacco Control, American Cancer Society - It is a horribly one-sided battle, public health’s war against safer nicotine products such as vaping, heated tobacco products, and oral snus. After decades of hammering the message that smokers must quit or they will die, public health and the tobacco control community are now trying to eradicate the very products millions use to successfully quit smoking. The War on Vaping seems illogical and intractable, why is that? Joining us today to answer this question and more is tobacco control insider Cliff Douglas, Adj. Prof. at University Michigan School of Public Health, and former Vice President of Tobacco Control at the American Cancer Society. Douglas says the mainstream tobacco control community lost its way and it’s time to end the misinformation and vitriol directed towards vaping and tobacco harm reduction.
Only on RegWatch by RegulatorWatch.com. Released: May 23, 2021 Produced by Brent Stafford

OBS Engine 100W Kit

Engine Kit is the first vaping device that can replace battery sleeve. It supports single 18650/20700/21700 battery to get a max output of 100W. With 2A Type-C fast charging, it features longer endurance and easier recharging. Paired with a Engine S Tank having 6ml e-juice capacity, it is equipped with the latest E Mesh Series Coil to bring you fresh, smooth and rich cloud experience. Besides, Engine S Tank features a airflow control system and a 0.96 inch LED screen to display the vaping details.


Details:

1. The first vaping device that can replace the battery sleeve
2. Single 18650/20700/21700 battery to reach 100W max output
3. 2A type-c fast charging
4. With Engine S Tank
5. New E series mesh coil
6. 0.96 inch LED screen






Steam Crave Hadron Pro DNA250C Combo Kit

Hadron Pro DNA250C Combo Kit is combined with Hadron Pro DNA250C Mod and Ragnar RDTA. Steam Crave Hadron Pro DNA250C Box Mod is powered by a changeable Li-Po 1600mAh battery, it fires to a 400W maximum output with an industry leading power efficiency rating. Steam Crave Hadron Pro Box Mod adopts the advanced Steam Crave DNA250C chipset. It supports Replay/Boost/VW/TC modes. The Mod is charged via USB 3A charging (2A Suggested). The high discharge battery can provide low profile, low chance of leaking electrolyte, low internal resistance, long cycle life and safety guarantee. Its 0.9" full color TFT screen shows vaping data clearly, brings you more convenience. The Aromamizer Ragnar RDTA can hold 18/25ml e-juice capacity (Replacement Glass is included). It can produce 80% side airflow, 20% bottom airflow and will provide smooth airflow for medium and high power vaping. Steam Crave Aromamizer Ragnar RDTA adopts postless deck with bottom honeycomb air holes for wonderful vaping experience.


Details:

1. Changeable Built-in battery, Li-Po 1600mAh 4s
2. DNA250C Chipset: Replay/Boost/VW/TC modes
3. Maximum output 400W
4. 0.9" full color TFT screen
5. 22mm wide bore 810 drip tip
6. Postless deck with bottom honeycomb air holes
7. 80% side airflow and 20% bottom airflow
8. Smooth airflow for medium and high power vaping
9. Multiple protections: Atomizer/Low Resistance/Short Circuit/Overheat/Low Voltage Step Down/Onboard Reverse Polarity Protection






Suorin Air Mod Pod Kit

Air Mod Kit is designed with extra sustainability and practicality to breathtaking performance. Air Mod is constructed with solid zinc alloy on the one side, translucent and lightweight PCTG cover on the other side, which displays futuristic aesthetics and the technology of tomorrow. It contains 1500mAh battery within a sleek body, features upgraded type-c port to provide faster charging. With the advantage of Z-shape blowhole design and upgraded atomization technology, it can level up the heating areas and heating speed while keeping a relative low temperature of the device. The 0.6ohm/0.8ohm mesh coil included in the package will bring a true smooth flavor and most satisfying throat hit for you. The advanced conditioning mechanism hepls you choose the desired air inlet easily. There are 3 original aeration holes on the interface to provide you a most flavorful vaping enjoyment. In addition, it can detect the coil's resistance to the according wattage. Air Mod has a longer service lifespan with a lower environmental impact tanks to the use of recycled parts and conflict-free materials. The pod's capacity is 3ml.


Details:

1. Ingeniously framed in solid zinc alloy on the one side
2. Translucent and lightweight PCTG cover on the other side
3. A sleek body with 1500mAh battery
4. Upgraded type-c fast charging
5. Refined heating dynamics, 0.96 inch TFT display
6. 0.6/0.8ohm sub ohm mesh coil to meet your different needs
7. Advanced conditioning mechanism
8. 3 original aeration holes to increase aerodynamic efficiency and channel air for cooling
9. Automatically detects coil's resistance to the according wattage
10. Made with recycled parts and from conflict-free materials

What do you know about the new Steam Crave Hadron Pro DNA 250C Mod Uk?It may seem a little expensive when you look at the price.It looks ordinary, but when you get to know it, it's worth buying.Let's take a closer look at it.

Steam Crave Hadron Pro DNA 250C 400W Box Mod uk for sale is the Steam Crave's 1st DNA 4s LiPO mod which features Evolv's DNA 250C chip with Boost and Replay function. Steam Crave Hadron Pro DNA 250C Mod is powered by LiPO 1600mah built-in battery and can fire up to 400W output.

Steam Crave Hadron Pro DNA 250C Box Mod adopts 0.9 inch Full-Color TFT Screen and supports VW, VV, TC, TCR, Bypass modes to meet different needs. The integrated USB port can also easily charge the internal Li-Po 4s battery and supports firmware upgrading.If you're interested in it,please buy from best online vape shop uk.

SPECIFICATION
Dimensions:59 x 36.66 x 116.1mm
Weight:416.9G
Battery:LiPO battery included (1600mah, 4s)
Input Voltage:6.0V-16.8V
Battery Voltage:12V-16.8V (3.0V-4.2V, 4s)
Output Voltage:0.2V-16.8V
Power Range:1-400W
Current Range:0.5A-30A
Max Charging Current:3A (2A suggested)
Temperature Range:200°F-600°F
Coil Material supported:Nickel, Titanium, SS460, SS316, KA1, Ni80, Ni90
Screen Pixel:0.9" (80*160 pixel) full Color TFT
Body Material:Zinc Alloy
Color available:Silver, Gunmetal, Black

Quick Link:Steam Crave Hadron Pro DNA 250C Mod 400W

Hi, my name is ladycrooks and I am new to this forum. I quit smoking only 4 months ago after losing both my parents to cigarettes. One died from emphysema the other from stage 4 c.o.p.d. at 33 years old after smoking for 23 years I could barely breathe. I tried everything to quit in prior years and failed to quit before.. and then finally I tried vaping and I haven't thought of or touched a cigarette since January 25 this year. (2021) I started on custard and dessert flavours and haven't stopped. I have alot to ask because I'm new to diy ad well.

Anyone interested in these disposables?

5 x Tobacco
4 x Mint
4 x Mango Ice

$2 each and I will ship priority which maybe be $8 or so. $34 if anyone wants these, or we can trade.

Trade value is probably $65 @ $5 ea.

Freemax Maxus 200W Metal Edition Kit:
Up to now I have been lucky enough to receive the whole Maxus series (Resin Edition) produced by FreeMax for my tests, with this we arrived at 4 Maxus Mod.
All these Mods for one reason or another I really liked and in the family they are used regularly.

One in particular surprised me a lot for the technology applied and it is the Maxus 200W model with double battery "Smartload Tech Load At Will" the Mod works perfectly with any direction of insertion of the two cells, but is also able to work with only one 18650 battery inserted!
Freemax very kindly sent me the new Metal Edition model to find out what the differences are with the previous kit and for this I thank them.
Maxus 200W Kit: Freemax Maxus 200W Kit With M Pro 2 Tank



Packaging:
The Packaging with which the Maxus Metal Edition kit arrives is almost the same as the previous one (Resin edition), only the front image changes and some new features that are described on the back.



Content:
The renewed Freemax M2 PRO Metal Edition atomizer can also be purchased separately together with all your favorite Coiltechs (M1-M2-M3-M4).
Freemax M Pro 2 Tank



Kit colors:
Maxus 200W Metal Edition is currently available in four different colors, two of which maintain a sporty line and are the Marble Black and Stabwood Rainbow versions. The other two have a much more classic and "serious" look are the Gunmetal and Silver variants. I received the Silver version for this test.
"Metal" and "Resin" Edition naturally use a different filler material on the Mod panels, this detail combined with other small differences due to the Tank M2 PRO update raise the weight of the Kit by about 12 grams.



M2 PRO Metal Edition Tank:
The Metal Edition is designed with an ISO 8317 certified child protection top fill design obtained in Canada. All you have to do is simply lift and slide the Top-Cap and then refill the tank super easily and safely.
This edition includes four different colors of the tank.





If you want to know more about my impressions and features of the Freemax Maxus 200W Box Mod kit, please visit my detailed review Link: Freemax maXus 200W



Here you will find my details about the M PRO RBA Kit for M Pro and M PRO 2 Tank
Link: Freemax M PRO RBA for M Pro and M PRO 2 Tank



Thanks for reading.