Threads
-
Locked
Innokin Sceptre (Revised MTL version) review
- By SP013
- Innokin Technology
- 3 Replies
Hello,
Today a very short review on the revised version of the Innokin Sceptre. Reason it is short is because I am only going over the changes compared to the original Sceptre. I have reviewed the original Sceptre before> Innokin Sceptre kit review
Differences with original Sceptre are:
1. Tighter MTL airflow
2. New color/material options (carbon fiber)
3. New improved coils.
If it is about the functionality of the device and the specifications it is entirely the same on both. I enjoyed the original Sceptre, but for me the MTL draw was a bit too loose. The revised Sceptre comes with a special MTL-pod, which can be identified by its orange base and 'MTL' written on the base.
So how is the new pod? It is legit MTL, you can get a really nice and tight draw on this pod now, fully closed is exactly like my sweetspot. It is not extremly tight, but very tight. Even entirely open it is tighter than the original Sceptre set to its tightest. Very good improvement for those MTL-vapers out there looking for a proper, high battery capacity pod.
I found one more change on the pod. Before liquid would flow through the space under the mouthpiece, but on this MTL-pod that area is sealed off. This means the capacity went down to 2ML, which for these super-tiny MTL coils is fine.
Liked the looks of the original Sceptre a lot, but the new Carbon fiber versions I received are even more gorgeous, especially the black one. It is real carbob-fiber for those wondering.
One thing that improved on the device as well, but is not generally mentioned, is the fire-button. On the original one it was quite loose and was rattling quite a bit. On these new Carbon-fiber ones the fire-button sits tight and does not rattle at all.
New MTL coils, and not just your regular coils, but made with Seaweed Fibre cotton. First time I hear of Seaweed Fibre being used in coils, and no the cotton material is not green like nori. Original coils were round-wire and these new coils are mesh rated at 0.65ohm.
Very clearly these new coils beat the old coils. Flavor is very good for a MTL-pod. No issues with gurgling or leaking, just very good coils.
Conclusion:
Innokin is unique in the way that they always kind of admit their 'mistakes' by releasing improved versions. They listen to the customers and with that feedback they make improvements, just like with the Ares II.
After these Sceptre improvements this is my favorite MTL-pod from now on. Main reasons are:
- impressive 1400mAh battery
- very good flavor
- ability to get a tight draw
- ability to use old pods for a nice RDL
- portable and light-weight
- Auto draw and button activation
If there is anything I would still change it would be USB-C, it simply charges faster than micro USB.
Great job Innokin for listening and creating another fantastic MTL-pod. My favorite MTL pod-mod is the Kroma Z and my favorite MTL-pod is from now on the Sceptre.
Special thanks to @Innokin_timmy for sending me these pods.
Take good care all,
Sjoerd
Today a very short review on the revised version of the Innokin Sceptre. Reason it is short is because I am only going over the changes compared to the original Sceptre. I have reviewed the original Sceptre before> Innokin Sceptre kit review
Differences with original Sceptre are:
1. Tighter MTL airflow
2. New color/material options (carbon fiber)
3. New improved coils.
If it is about the functionality of the device and the specifications it is entirely the same on both. I enjoyed the original Sceptre, but for me the MTL draw was a bit too loose. The revised Sceptre comes with a special MTL-pod, which can be identified by its orange base and 'MTL' written on the base.
So how is the new pod? It is legit MTL, you can get a really nice and tight draw on this pod now, fully closed is exactly like my sweetspot. It is not extremly tight, but very tight. Even entirely open it is tighter than the original Sceptre set to its tightest. Very good improvement for those MTL-vapers out there looking for a proper, high battery capacity pod.
I found one more change on the pod. Before liquid would flow through the space under the mouthpiece, but on this MTL-pod that area is sealed off. This means the capacity went down to 2ML, which for these super-tiny MTL coils is fine.
Liked the looks of the original Sceptre a lot, but the new Carbon fiber versions I received are even more gorgeous, especially the black one. It is real carbob-fiber for those wondering.
One thing that improved on the device as well, but is not generally mentioned, is the fire-button. On the original one it was quite loose and was rattling quite a bit. On these new Carbon-fiber ones the fire-button sits tight and does not rattle at all.
New MTL coils, and not just your regular coils, but made with Seaweed Fibre cotton. First time I hear of Seaweed Fibre being used in coils, and no the cotton material is not green like nori. Original coils were round-wire and these new coils are mesh rated at 0.65ohm.
Very clearly these new coils beat the old coils. Flavor is very good for a MTL-pod. No issues with gurgling or leaking, just very good coils.
Conclusion:
Innokin is unique in the way that they always kind of admit their 'mistakes' by releasing improved versions. They listen to the customers and with that feedback they make improvements, just like with the Ares II.
After these Sceptre improvements this is my favorite MTL-pod from now on. Main reasons are:
- impressive 1400mAh battery
- very good flavor
- ability to get a tight draw
- ability to use old pods for a nice RDL
- portable and light-weight
- Auto draw and button activation
If there is anything I would still change it would be USB-C, it simply charges faster than micro USB.
Great job Innokin for listening and creating another fantastic MTL-pod. My favorite MTL pod-mod is the Kroma Z and my favorite MTL-pod is from now on the Sceptre.
Special thanks to @Innokin_timmy for sending me these pods.
Take good care all,
Sjoerd
-
Locked
Coming Soon! Artery PAL 3 25W Kit 1000mAh 3ml
- By vapbig
- HealthCabin
- 0 Replies
Artery PAL 3 Kit is a pod system kit that is great for MTL/RDL vaping. It is 20% smaller in volume than PAL 2. Built with 1000mAh battery capacity, it can provide you lasting vaping. PAL 3 Kit comes with upgraded HP coil to bring better flavor and longer lasting: HP 0.7ohm coil and HP 1.2ohm coil. Designed with finely tuned airflow system, you can obtain perfect RDL and MTL vaping experience. The mouthpiece is ergonomic for better inhalation felling. The pod has 3ml e-juice capacity and comes with easy bottom filling. And the type-c fast charging will bring great charging.
Features:
1. Made for fantastic MTL/RDL vaping
2. Upgraded HP cores for better flavor and longer lasting
3. Finely tuned airflow system
4. Ergonomic mouthpiece design
5. 3ml e-juice capacity
6. Easy bottom filling
7. 1000mAh battery capacity
8. Type-C fast charging, max 1A charging current
9. 20% smaller in volume than PAL 2
...
Click here for more:
Artery PAL 3 Kit: Artery PAL 3 25W Pod System Kit 1000mAh 3ml
PAL 3 Empty Pod: Artery PAL 3 Empty Pod Cartridge 3ml
Features:
1. Made for fantastic MTL/RDL vaping
2. Upgraded HP cores for better flavor and longer lasting
3. Finely tuned airflow system
4. Ergonomic mouthpiece design
5. 3ml e-juice capacity
6. Easy bottom filling
7. 1000mAh battery capacity
8. Type-C fast charging, max 1A charging current
9. 20% smaller in volume than PAL 2
...
Click here for more:
Artery PAL 3 Kit: Artery PAL 3 25W Pod System Kit 1000mAh 3ml
PAL 3 Empty Pod: Artery PAL 3 Empty Pod Cartridge 3ml
-
Locked
Wotofo SMRT Pod System Starter Kit!
- By AndyColins
- Efun.Top
- 0 Replies
Wotofo SMRT Pod System Starter Kit!
Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top
Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top
-
Locked
Getting inside the Innokin Sensis...
- By James
- ECigaretteDirect
- 4 Replies
The new Innokin Sensis has some of the most interesting vape tech we’ve seen for years. We take a look at how the tech works over on the blog...
-
Locked
Sourcemore US Stock Clearance Sale
- By Ema
- Sourcemore
- 0 Replies
Sourcemore US Stock Clearance Sale
15% OFF Coupon: US15
Only Ship to the USA. Limited quantity, first come first get.
*Ends Mar. 16th.
Enter here<<<USA Warehouse - Oversea Warehouses
-
Locked
New M Pro RBA Designed For M Pro & M Pro 2
- Freemax
- 0 Replies
If you have one Freemax M Pro or M Pro 2 Tank, you must want to have one M Pro RBA Coil, although there are many types of mesh coils for options. The M Pro RBA is made of 2 parts: build deck and top cap. The deck comes with an innovative postless design and creative Honeycomb Turbo Air Hole system, making coil-building easier and more time-saving with less coil waste.
In order to thank you for all your supporting of Freemax, now you have a chance to get one M Pro RBA Coil for free if you enter Facebook of Freemax Ecigs and Instagram of freemaxvapefan platforms.
In order to thank you for all your supporting of Freemax, now you have a chance to get one M Pro RBA Coil for free if you enter Facebook of Freemax Ecigs and Instagram of freemaxvapefan platforms.
-
Locked
In Stock-Elf Bar RF350 Refillable Pod Kit $8.90 For Sale
- By Verashu
- Vapesourcing
- 0 Replies
Hey guys. Today I'm gonna introduce a new device named Elf Bar RF350. It only sells at $8.90 in vapesourcing online store now, don't miss out!
Elf Bar RF350 is a refillable pod system that will satisfy various flavor needs and bring an incredible vaping experience! Powering it is a built-in 350mAh battery but the output is not mentioned. However, I think it can last some time as the output power wouldn't be very high. Charging is done via a Type-C USB port on the bottom of the device, the entire charging cycle will last more than 20 minutes.
Elf Bar RF350 pod vape does not have plethoric functional components, it just automatically activates when you draw and has a small LED indicator to monitor the status of the device. The RF350 pod has a capacity of 1.6ml and is filled on the side. Inside the pod is a built-in coil whose resistance is 1.2Ω, very suitable for high nicotine e-liquids. Moreover, the coil features a full metal air tube, which can provide more concentrated flavors.
Get it here: Elf Bar RF350 Refillable Pod System Kit 350mAh
You may also like:
cheap puff plus
drag x plus price
Elf Bar RF350 is a refillable pod system that will satisfy various flavor needs and bring an incredible vaping experience! Powering it is a built-in 350mAh battery but the output is not mentioned. However, I think it can last some time as the output power wouldn't be very high. Charging is done via a Type-C USB port on the bottom of the device, the entire charging cycle will last more than 20 minutes.
Elf Bar RF350 pod vape does not have plethoric functional components, it just automatically activates when you draw and has a small LED indicator to monitor the status of the device. The RF350 pod has a capacity of 1.6ml and is filled on the side. Inside the pod is a built-in coil whose resistance is 1.2Ω, very suitable for high nicotine e-liquids. Moreover, the coil features a full metal air tube, which can provide more concentrated flavors.
Get it here: Elf Bar RF350 Refillable Pod System Kit 350mAh
You may also like:
cheap puff plus
drag x plus price
-
Locked
New Arrival : Oumier Wasp Nano S Dual-Coil RDA 25mm £12.29
- VapesourcingUK
- 0 Replies
How much do you know about Oumier WASP Nano S Dual-Coil Rda uk? Let's have a look.
Discover the Oumier Wasp Nano S 25mm BF RDA, offering a postless build deck, dual coil configuration, and can be paired with squonking box mods. Constructed from durable stainless steel, the Oumier Wasp Nano S RDA possesses 5mL deep juice wells, offering plenty of vaping before dripping is needed. At the base of the build deck, the Wasp Nano S can be used with a squonking device to allow eJuice to travel from the squonking pin to the build deck. Accommodating a dual coil configuration, the Wasp Nano S features 4 deck based terminals, top secured via flathead screws to maximize vapor output.Don't miss it ,go to vapesourcing.uk.
SPECIFICATION
Diameter:25mm
Height:30mm
Build Deck
ual Post Build Deck
Coil Configuration: Dual Coil Configuration
Drip Tip:810 Drip Tip
Airflow:Slotted Top Cap Airflow Control
Colors:Black, Gold, SS, Blue
Quick Link: https://vapesourcing.uk/oumier-wasp-nano-s-rda.html
Discover the Oumier Wasp Nano S 25mm BF RDA, offering a postless build deck, dual coil configuration, and can be paired with squonking box mods. Constructed from durable stainless steel, the Oumier Wasp Nano S RDA possesses 5mL deep juice wells, offering plenty of vaping before dripping is needed. At the base of the build deck, the Wasp Nano S can be used with a squonking device to allow eJuice to travel from the squonking pin to the build deck. Accommodating a dual coil configuration, the Wasp Nano S features 4 deck based terminals, top secured via flathead screws to maximize vapor output.Don't miss it ,go to vapesourcing.uk.
SPECIFICATION
Diameter:25mm
Height:30mm
Build Deck
ual Post Build DeckCoil Configuration: Dual Coil Configuration
Drip Tip:810 Drip Tip
Airflow:Slotted Top Cap Airflow Control
Colors:Black, Gold, SS, Blue
Quick Link: https://vapesourcing.uk/oumier-wasp-nano-s-rda.html
-
Locked
Get the 188W Vandy Vape Jackaroo Dual 18650 Box Mod for £45.69
- VapesourcingUK
- 0 Replies
Have you ever tried Vandy Vape products? Today we recommend to you 188W Vandy Vape Jackaroo Dual 18650 Box Mod, it features an extensive temperature control suite, 5-178W output range, and anti-loss features. Now come to vapesourcing.uk to buy Vandy Vape Jackaroo Dual 18650 Box Mod only It costs £45.69.
Vandy Vape Jackaroo Dual 18650 Box Mod SPECIFICATION:
Chipset: Vandy Chip
Modes: Power/Bypass/Voltage/TC-Ni Mode/TC-SS/TC-Ti Mode
Power range: 5-188W
Working voltage: 6.4-8.4V
Working current: <50A
Output voltage: 0.5-8.0V
Coil resistance range: 0.05-3ohm
Charging port: Micro USB
Vandy Vape Jackaroo Dual 18650 Box Mod is made of zinc alloy and resin materials, which is not only very durable, but also very stylish and beautiful. Moreover, it also adopts an ergonomic design, you can hold it comfortably in your hand, or you can carry it in your pocket, so you can vaping anytime, anywhere. Vandy Vape Jackaroo Dual 18650 Box Mod also has IP67 waterproof, dustproof and shockproof functions, which means you can use it in the rain without worrying about damage caused by accidental fall, because it is strong enough.
Vandy Vape Jackaroo Dual 18650 Box Mod is powered by two 18650 batteries. The minimum output power is 5W and the maximum output power is 188W. It also supports multiple output modes, including: Power, Bypass, Voltage, TC-Ni Mode, TC -SS, TC-Ti Mode. In TC mode, it can be compatible with Nickel, Titanium, Stainless Steel Wire and other components.
On the side of the Vandy Vape Jackaroo Dual 18650 Box Mod body, there is also a 0.96 inch TFT color display. The display is very easy to read. You can intuitively check the battery level, the resistance of the atomizer, and the output power. All vaping data inside. On the top of its fuselage, there is also a standard 510 threaded interface, through the 510 threaded interface, you can use it with other vape tanks. It is worth noting that the coil blocking range supported by Vandy Vape Jackaroo Dual 18650 Box Mod is 0.05-3.0ohms.
Vandy Vape Jackaroo Dual 18650 Box Mod also has a variety of additional protection functions, including Short Circuit, Open Circuit, Over-heating, Overcurrent protection, 10 Seconds Cut-off, Low-Battery Warning. It also has a variety of colors to choose from, including Stripy Black, G10 Obsidian Black, Resin Blue Porcelain, Resin Red Agate.
Guess you also like:
swag px80 buy
Vandy Vape Jackaroo Dual 18650 Box Mod SPECIFICATION:
Chipset: Vandy Chip
Modes: Power/Bypass/Voltage/TC-Ni Mode/TC-SS/TC-Ti Mode
Power range: 5-188W
Working voltage: 6.4-8.4V
Working current: <50A
Output voltage: 0.5-8.0V
Coil resistance range: 0.05-3ohm
Charging port: Micro USB
Vandy Vape Jackaroo Dual 18650 Box Mod is made of zinc alloy and resin materials, which is not only very durable, but also very stylish and beautiful. Moreover, it also adopts an ergonomic design, you can hold it comfortably in your hand, or you can carry it in your pocket, so you can vaping anytime, anywhere. Vandy Vape Jackaroo Dual 18650 Box Mod also has IP67 waterproof, dustproof and shockproof functions, which means you can use it in the rain without worrying about damage caused by accidental fall, because it is strong enough.
Vandy Vape Jackaroo Dual 18650 Box Mod is powered by two 18650 batteries. The minimum output power is 5W and the maximum output power is 188W. It also supports multiple output modes, including: Power, Bypass, Voltage, TC-Ni Mode, TC -SS, TC-Ti Mode. In TC mode, it can be compatible with Nickel, Titanium, Stainless Steel Wire and other components.
On the side of the Vandy Vape Jackaroo Dual 18650 Box Mod body, there is also a 0.96 inch TFT color display. The display is very easy to read. You can intuitively check the battery level, the resistance of the atomizer, and the output power. All vaping data inside. On the top of its fuselage, there is also a standard 510 threaded interface, through the 510 threaded interface, you can use it with other vape tanks. It is worth noting that the coil blocking range supported by Vandy Vape Jackaroo Dual 18650 Box Mod is 0.05-3.0ohms.
Vandy Vape Jackaroo Dual 18650 Box Mod also has a variety of additional protection functions, including Short Circuit, Open Circuit, Over-heating, Overcurrent protection, 10 Seconds Cut-off, Low-Battery Warning. It also has a variety of colors to choose from, including Stripy Black, G10 Obsidian Black, Resin Blue Porcelain, Resin Red Agate.
Guess you also like:
swag px80 buy
-
Locked
Preview: Lost Vape UB Lite Pod kit - stylish, simple and most likely inexpensive
- By Verashu
- Vapesourcing
- 0 Replies
The last pod from Lost Vape has not yet appeared on the official website. But the manufacturer announced a completely different project. Well, I will not detain you in the inscription, we will get acquainted immediately, because the device, although very interesting, is actually very simple - Lost Vape UB Lite Pod kit.
Parameters
Dimensions: 115 x 20.6 x 19.8mm
Weight: 47.5g Body
Material: Aluminum Alloy + Plastic
Power: Built-in 1000mAh
Chipset: Quest
Cartridge Capacity: 2.0ml Vaporizer
Resistance: 0.4 / 0.8 / 1.4Ω
Output Power: 7 - 30W
Voltage range: 3.0 - 4.0V
Operating mode: Power
Supported resistance: 0.3 - 3.0Ω
As for the design, everything is simple, however, as always, stylish. The lightweight aluminum case is adorned with cute engraving, logo and model name. The profile is almost square, but a pair of opposite edges is fairly rounded.
The dimensions for the accessory segment are generally adequate - the novelty should still be attributed to stick pods. A removable vape cartridge of a standard small capacity, side refueling, and the mouthpiece is conveniently flattened. Control of the filled liquid is possible - the plastic is translucent.
Other kits we recommend:
kangvape smod stick plus in stock
kangvape onee stick 1900 puffs in stock
Parameters
Dimensions: 115 x 20.6 x 19.8mm
Weight: 47.5g Body
Material: Aluminum Alloy + Plastic
Power: Built-in 1000mAh
Chipset: Quest
Cartridge Capacity: 2.0ml Vaporizer
Resistance: 0.4 / 0.8 / 1.4Ω
Output Power: 7 - 30W
Voltage range: 3.0 - 4.0V
Operating mode: Power
Supported resistance: 0.3 - 3.0Ω
As for the design, everything is simple, however, as always, stylish. The lightweight aluminum case is adorned with cute engraving, logo and model name. The profile is almost square, but a pair of opposite edges is fairly rounded.
The dimensions for the accessory segment are generally adequate - the novelty should still be attributed to stick pods. A removable vape cartridge of a standard small capacity, side refueling, and the mouthpiece is conveniently flattened. Control of the filled liquid is possible - the plastic is translucent.
Other kits we recommend:
kangvape smod stick plus in stock
kangvape onee stick 1900 puffs in stock
-
Locked
GAS MODS Cyber RTA | Artery PAL 3 Kit
- By Ema
- Sourcemore
- 0 Replies
GAS MODS Cyber RTA
Cyber RTA is an excellent RTA compatible with 510 thread mod. It can hold 6ml large e-juice capacity (3.5ml replacement tube is included in the package). GAS MODS Cyber RTA can provide dense clouds and flavorful taste with bottom/side dual airflow system. Featuring top filling design, it is convenient and no leakage. GAS MODS Cyber RTA Tank adopts dual terminal building deck, which brings excellent vaping experience.
Details:
1. Durable 304 stainless steel
2. 6ml large e-juice capacity
3. Single coil building, postless build deck
4. Threaded 510 connection
5. Bottom/side dual airflow inlet
6. Compatible with 510 thread mod
Artery PAL 3 Kit
PAL 3 Kit is a pod system kit that is great for MTL/RDL vaping. It is 20% smaller in volume than PAL 2. Built with 1000mAh battery capacity, it can provide you lasting vaping. PAL 3 Kit comes with upgraded HP coil to bring better flavor and longer lasting: HP 0.7ohm coil and HP 1.2ohm coil. Designed with finely tuned airflow system, you can obtain perfect RDL and MTL vaping experience. The mouthpiece is ergonomic for better inhalation felling. The pod has 3ml or 2ml (TPD version) e-juice capacity and comes with easy bottom filling. And the type-c fast charging will bring great charging.
Details:
1. Made for fantastic MTL/RDL vaping
2. Upgraded HP cores for better flavor and longer lasting
3. Finely tuned airflow system
4. Ergonomic mouthpiece design
5. 3ml or 2ml(TPD) e-juice capacity
6. Easy bottom filling
7. 1000mAh battery capacity
8. Type-C fast charging, max 1A charging current
9. 20% smaller in volume than PAL 2
10. Safety protections: Overcharge/Short Circuit/Overheat/Cut-off at 8s/Balance Charging Protection
Cyber RTA is an excellent RTA compatible with 510 thread mod. It can hold 6ml large e-juice capacity (3.5ml replacement tube is included in the package). GAS MODS Cyber RTA can provide dense clouds and flavorful taste with bottom/side dual airflow system. Featuring top filling design, it is convenient and no leakage. GAS MODS Cyber RTA Tank adopts dual terminal building deck, which brings excellent vaping experience.
Details:
1. Durable 304 stainless steel
2. 6ml large e-juice capacity
3. Single coil building, postless build deck
4. Threaded 510 connection
5. Bottom/side dual airflow inlet
6. Compatible with 510 thread mod
Artery PAL 3 Kit
PAL 3 Kit is a pod system kit that is great for MTL/RDL vaping. It is 20% smaller in volume than PAL 2. Built with 1000mAh battery capacity, it can provide you lasting vaping. PAL 3 Kit comes with upgraded HP coil to bring better flavor and longer lasting: HP 0.7ohm coil and HP 1.2ohm coil. Designed with finely tuned airflow system, you can obtain perfect RDL and MTL vaping experience. The mouthpiece is ergonomic for better inhalation felling. The pod has 3ml or 2ml (TPD version) e-juice capacity and comes with easy bottom filling. And the type-c fast charging will bring great charging.
Details:
1. Made for fantastic MTL/RDL vaping
2. Upgraded HP cores for better flavor and longer lasting
3. Finely tuned airflow system
4. Ergonomic mouthpiece design
5. 3ml or 2ml(TPD) e-juice capacity
6. Easy bottom filling
7. 1000mAh battery capacity
8. Type-C fast charging, max 1A charging current
9. 20% smaller in volume than PAL 2
10. Safety protections: Overcharge/Short Circuit/Overheat/Cut-off at 8s/Balance Charging Protection
-
Locked
Artery PAL 3 25W Pod System Starter Kit MTL / RDL
Hello, everyone
Today, I will introduce a portable Pod Kit, called Artery PAL 3 25W Pod System Starter Kit, supporting MTL / RDL vaping.
Artery PAL 3 25W Pod Kit with a 3.0ml Artery PAL 3 Pod Cartridge
Artery PAL 3 Pod System Mod is powered by a rechargeable 1000mAh built-in battery, enough to fire up to 25W (5~25W). Compared to Artery PAL 2, Artery PAL 3 is 20% smaller in volume, an ergonomic and compact appearance suitable for you to carry it round.
Artery PAL 3 Pod Cartridge holds 3.0ml capacity with easy bottom filling system. PAL 3 Pod Cartridge features a Finely Tuned Airflow System for perfect RDL and MTL vaping experience. In addition, It adopts ergonomic mouth piece design for a better inhale feeling. PAL 3 Pod Cartridge is compatible with the upgraded HP coils (HP 0.7ohm Coil (suggested wattage: 15~18W) and HP 1.2ohm Coil (9~12W) included), delivering better flavor and longer lasting vaping.
Multiple colors for your choice
More details about Artery PAL 3 Pod System Kit, Please check >> https://www.3fvape.com/48359-artery-pal-3-25w-pod-system-vape-starter-kit.html
Today, I will introduce a portable Pod Kit, called Artery PAL 3 25W Pod System Starter Kit, supporting MTL / RDL vaping.
Artery PAL 3 25W Pod Kit with a 3.0ml Artery PAL 3 Pod Cartridge
Artery PAL 3 Pod System Mod is powered by a rechargeable 1000mAh built-in battery, enough to fire up to 25W (5~25W). Compared to Artery PAL 2, Artery PAL 3 is 20% smaller in volume, an ergonomic and compact appearance suitable for you to carry it round.
Artery PAL 3 Pod Cartridge holds 3.0ml capacity with easy bottom filling system. PAL 3 Pod Cartridge features a Finely Tuned Airflow System for perfect RDL and MTL vaping experience. In addition, It adopts ergonomic mouth piece design for a better inhale feeling. PAL 3 Pod Cartridge is compatible with the upgraded HP coils (HP 0.7ohm Coil (suggested wattage: 15~18W) and HP 1.2ohm Coil (9~12W) included), delivering better flavor and longer lasting vaping.
Multiple colors for your choice
More details about Artery PAL 3 Pod System Kit, Please check >> https://www.3fvape.com/48359-artery-pal-3-25w-pod-system-vape-starter-kit.html
-
Locked
BP Mods Bushido Squonk Mechanical Box Mod for 22mm BF RDA
A latest Mech Mod from BP Mods, Bushido Squonk Mechanical Box Mod for 22mm RDAs
BP Mods Bushido Mod, a portable mech squonk mechancial mod, is powered by 1 x 18650 battery (not included). Construed from Aluminum Alloy, it fits for 22mm BF RDAs.
BP Mods Bushido Mech Mod is easily operated by only turning the mod over and unscrewing the cap to refill the squonk bottle.
Four colors for your choice: Space Grey, Green, Tangerine, Green, Grape
More details about BP Mods Bushido Squonk Mechanical Mod, Please check >> https://www.3fvape.com/48363-bp-mods-bushido-squonk-vape-mechanical-box-mod.html
-
Locked
New Arrival | GeekVape Wenax K1 16W Pod Kit
- Ecig Mafia
- 0 Replies
GeekVape Wenax K1 16W Pod Kit comes with 600mAh Battery and 2ml E-Juice Capacity. It's available in Nine Dashing Color. Its made up of Aluminium Material with a 3-level of power adjustment output. It comes with Type-C Charging Port.
Parameters:
Parameters:
- Power Output: 9-16W
- Coil Resistance: 0.4-3Ω
- Battery Capacity: 600mAh
- Charging Specification: USB-C Charging Port 5V
- Low Voltage Warning: 3.2 ± 0.1V
- PCBA Temperature Alarm : 80°
- Longest Vaping Time: 10S
- Working Temperature: -10~45°C
- Stand-By Current: ≤15uA
