Like the newest Freemax Maxus 50W Box Mod Kit and Twister 30W Vape Pen Kit, Gemm 25W Pod Mod Kit is also designed for both MTL and DTL vaping needs, also compatible with nicotine salt and freebase e-liquids. Can you still remember some features of the Gemm 25W Pod Mod Kit?



First, the GEMM 25W mod is powered by a 1300mAh built-in battery and it offers a 3-level Smart Wattage Adjustment (Hard, Medium, and Soft) for customers’ preferences by clicking the firing button 3 times for every adjustment.

Second, equipped with the military-grade SS904L metal and exclusive 90% Tea Fiber Cotton Formula, GEMM Pod is able to preserve the maximum flavor of your nic salt or freebase e-juice.

Third, in order to maximize the function of the GEMM 25W pod mod kit, FreeMax has designed a DTL and MTL pod mod kit with 0.5ohm and 1.0ohm coil pods.

Fourth, the GEMM tank is capable of supporting up to 20 tanks (2ml) (longer lifespan) before the flavors get muted due to a combination of the upgraded SS904L mesh material and patented 90 percent Tea Fiber Cotton.

For more features of Gemm 25W, please enter Freemax official vape website directly.

I'm starting back with vaping. I vaped with a kanger cupti and cupti 2 a couple years ago. I want to start vaping again cause I just can't stand cigarettes. I want something simple. I even thought about 'cig a likes' that you can just toss the old cart and put a new one in. But I don't think that would be strong enough. Do they even make those anymore?
Also thinking about getting another original Cupti.

I thought about these 2. From what I've read, Voopoo is the popular go to now?
I don't really need anything over 60wt I don't think. Thanks.

I do like that the Argus has a choice of mouth to lung. I like the idea of it being more like a cigarette.

Well now after seeing these two are basically the same except for the internal battery on one. I'm now looking into the
AEGIS SOLO KIT.

VOOPOO ARGUS PRO 80W POD MOD KIT
VOOPOO ARGUS X 80W POD MOD KIT

RRP is currently $120 USD
Asking $70 USD including express postage to USA or UK. No guarantee on time, but hopefully within 2 weeks to your door

Other destinations on request

8.5/10

Decent mod

I am in Australia

Say hello to Manik Mini pod from WOTOFO, a litter brother of former Wotofo Manik pod.

1. Side-filling cartridge,MTL-specific mouthpiece design for a flavorful vaping
2. Built-in M12 nexMESH 0.6ohm Coil/M11 Parallel 0.6ohm Coil,performing super well
3. 1000mAh built-in battery,output power 1-30W,easy auto-draw vaping
4. Zin Alloy material+Leather surface,comfortable tactile sensation & great endurance

Want to try it out? Join ElegoMall now!


To enter:
1. Where are you from? and do you know this vape brand - WOTOFO?
2. Share your real thoughts or first impression of this Manik Mini pod.
3. Tag your (3 or more) friends come to join too.

Notes:
1. You must over 21 years old.
2. 2 Lucky winners will be announced on 4th, Feb.
3. After receiving the prize, pls make the review on ECF. Thanks.
4. Number your entry, for instance: #Post 1

Please don’t hesitate to join us. Good luck! Looking forworde to see our lucky winner. Stay tuned for ElgoMall for more latest vape kits and great deals.

Hello, everyone.
Today, we are going to introduce Uwell Whirl S 1450mAh 18W Pod System Vape Pen Starter Kit.
Original Uwell Whirl S Pod System Pen Starter Kit consists of a Uwell Whirl S 1450mAh 18W Battery Mod and a 2.0ml Whirl S Pod Cartridge.

Uwell Whirl S Battery Mod is powered by a 1450mAh built-in battery, enough to provide a maximum output power of 18W in Bypass mode with 5V / 2A USB-C charging. Equipped with color LED and constructed from Stainless Steel, Whirl S Mod can be activated by automatic pull / fire button, easy for you to operate. In addition, it is shaped like a pen, perfectly suitable for you to carry it outside.

Whirl S Pod Cartridge holds 2.0ml e-juice capacity with top filling system. It features adjustable airflow located on the bottom, bringing you RDL or MTL vaping experience. With a magnetic connection, the pod cartridge can be easily disassembled and cleaned with running water to make cleaning more convenient and avoid the Mod damaged by water.

Four colors for your choice: Coffee, Iridescent, Blue, Dark Grey.

More details about Uwell Whirl S Pod System Pen Starter Kit>>;Please check: https://www.3fvape.com/48176-uwell-whirl-s.html

Brand: Geekvape
Product Name: Geekvape Wenax K1 Kit 2ml
Type: Kit

Introduction
Geekvape Wenax K1 Kit 2ml features a mind-blowing K1-A beautifully anodized aluminum body embodied by nine dashing colors. It maintains steady output even when the battery low. With 3-level adjustable power output, we push Wenax K1 even further, into the sky, upon the air.

Parameters of Geekvape Wenax K1 Kit 2ml
Capacity: 2ml
Output Wattage: 9-16W
Battery: 600mAh Internal Battery
Working Temperature: -10~45℃
Coil Resistance: 0.4-3.0Ω
Longest Vaping Time: 10s
Low Voltage Warning: 3.2士0.1V
PCBA Temperature Alarm: 80℃
Stand-by Current: ≤15uA
Features of Geekvape Wenax K1 Kit 2ml
➤Anti inadvertent
➤Auto Draw
➤3-Level Adjustable Power
➤2ml Refillable Pod
➤Button Triggered

Coupon Code: NEW21

Click Geekvape Wenax K1 Kit for more details>>>
or visit Recommend for more discounts

note: must log in for the discount

Sale: Only $3.90 for Uwell Crown 3 Sub Ohm Tank!


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top

Kriemhild II Sub Ohm Tank fits for Vapefly Kriemhild Kit. It is an upgraded version of the original Kriemhild Sub Ohm Tank. Vapefly Kriemhild II 2 Tank features 4/5ml large e-juice capacity and top refilling system. The tank applies the newest Duplex™ patented mesh technology, which ensures excellent flavor and fabulous vaping experience. The coil fires up instantly and heats evenly. It creates soft and delicate taste for vapers and cloud chasers.


Details:

1. Upgraded version, 4ml/5ml large e-juice capacity
2. FreeCore Duplex mesh 2.0 coil, patented technology
3. Fire up instantly, heat evenly
4. Massive vapor, soft and delicate taste
5. Easy top refill system, pull-push opening mechanism
6. Plug-pull coil replacement, easy and convenience

I popped in here a few weeks ago for the first time in months. I was shocked to read about the vape shipping ban that is quickly approaching. And I am in panic mode! I’ve just been happily vaping away for 8 years now and was totally oblivious to all this. (I am already stocked up on nicotine and have a lot of learning to do there with mixing my own juice. But that will be future posts) For this post my question is about stocking the batteries I currently use and the shelf life I should expect.

I have used Halo Triton with clearomizers for most of my years vaping (after moving up from G6) and loved them! When I found out they were no longer being produced, and the stock I had on hand ran out, I switched to Kanger eVod Twist VV and am pretty happy with those.

3 years ago I also had to find something similar to my Tritons, but only in auto battery because I was having surgery on both my thumbs and would be unable to use them to press a button on a manual battery. So I came upon the V4L auto Zeus with smilomizers. And I love those also, and continue to use those along with the Kanger eVod.

I know I’m old school, but I would like to use these 2 setups as long as I can before switching to and learning how to use external battery mods. (I am going to purchase and stock up on those within a week or two but that will be another post too! will need help! )

SO my question is…..how long of a shelf life would be expected out of a new Kanger eVod twist and new V4L Zeus batteries? I realize I really have no idea when they were actually manufactured, but if they were with in the last say 8-12 months or so, what kind of shelf life would they still have left? I would like to stock up on some to go a little longer before changing over to mods!

THANKS!

Parameters:

• Size: 48.15* 25.4* 82.9mm
• Battery: 1200mAh built-in battery
• Output: 5-45W
• Screen: 0.42 Inch OLED Display
• Modes: Power/Bypass modes
• Resistance range: 0.1-3ohm
• Temperature range: -10-45℃
• Charging: 5V/1.5A
• Standby current: <10uA
• Capacity: 4ml
• Drip Tip: 510 Drip Tip
• Resistance: G. Coil Boost Formula 0.4 Ohm Mesh Coil(25-33W)
• G. Coil Boost Formula 0.6 Ohm Mesh Coil(15-25W)

Features:

• Internal 1200mah battery with max 45W output
• Stable output buck-boost tech
• 0.42 inch OLED screen
• IP67 Waterproof & Shockproof
• Power/Bypass modes
• Geekvape G Coil series
• Adjustable top airflow
• Top refill design, no leakage

Package Content:

• 1* Aegis Hero(4ml)
• 1* Geekvape G. Coil Boost Formula 0.4 Ohm Mesh Coil(25-33W)
• 1* Geekvape G. Coil Boost Formula 0.6 Ohm Mesh Coil(15-25W)
• 1* Drip Tip
• 1* Coil Tool
• 1* User Manual
• 1* USB Cable

Does anyone know if this bill includes flavors , Such as ordering from The perfumes apprentice ?

Hello again everyone and welcome to today's review from Voopoo on the latest full sized dual battery box mod as well as a new Pod/ Tank also making its debut in this kit, I'm talking about the latest evolution of the Drag box mod and new Pod/ Tank called the TPP which is larger than the proven PNP tank giving the user 5.5ml of juice capacity. Users of Voopoo's dual battery Drag's have seen them evolve in different ways from the original Drag 157 and todays release is no different giving the user 4 modes of vaping and 1 of them is TC. As far as the TPP Pod/ Tank goes it's larger than the proven PNP and has a new set of coils with larger airflow and increased wattage ranges. Before I give to much away before the review let's have a look at one of Voopoo's new releases, the Drag 3 with the TPP Pod/ Tank and coils.


COLOR CHOICES





INCLUDED IN THE BOX





MEASUREMENTS






PARAMETERS






LEGEND AS ALWAYS





DUAL 18650 TYPE-C 5V 2AMP FAST CHARGING





EIGHT SAFETY PROTECTIONS





GENE.FAN 2.0 ADVANCED CHIP





SMART AND POWERFUL





510 CONNECTER ( TPP ) ( PNP ) ( 510 )





PNP ATOMIZER CAPABLE





TPP 5.5 ML TANK USES THE SAME MAGNETIC CONNECTION AS THE PNP TANK





NEW TPP COILS





TEMPERATURE CONTROL MODE





FIRST IMPRESSIONS


Opening up the package and sliding out the contents you are greeted with the Drag 3 Mod and TPP Tank sitting in a foam cutout with your charge cord, user manual,and 1 TPP-DM1 ( 0.15Ω ) and 1 TPP-DM2 ( 0.2Ω ) mesh coil inside a long rectangular box underneath them . You will notice in this picture the leather spine and sides appear to be of a rough leather but in fact the texture has a soft almost suede like feel to it making it very comfortable to hold in the hand.


View attachment 927677


COILS AND POD/TANK


As you can see in the contents of the kit, Voopoo has a new Pod/Tank called the TPP and it's juice capacity has been increased to 5.5ml from the PNP Pod/Tank, and with the new Pod/ Tank come new coils for it. The new coils are the TPP-DM2 0.2Ω and the TPP-DM1 0.15Ω and both are mesh coils with the 0.2Ω rated for between 40-60w and the 0.15Ω rated between 60-80w. The new TPP coils are considerably larger than the previous PNP coils and also have a larger diameter as well as the wicking surface also has been increased. Everything is the same as the proven PNP such as the airflow selector on the 510 adaptor base, connection method which remains strong magnets at the bottom of the Pod/Tank as well as the fill port still in the same spot at the bottom of the Pod/ Tank. You now have the ability to use your own drip tips if you wish, I have no problem using the supplied drip tip finding it to be comfortable to use. Below is a photo of the coils increased diameter as well as larger wicking material. One thing that I want to point out is that all PNP Pod/Tanks will work in the 510 adapter including the Voopoo RTA Pod/Tank. A last observation on the airflow is past halfway closed a slight whistle type sound develops, more whoosy sound than whistle though.




BATTERY DOOR


The dual 18650 battery door is located on the bottom of the device and seems to be a very secure door, I never had a accidental opening of it in the time I've used it. Battery polarity is marked on the battery door itself with a positive + and a negative - symbol, there is no marking for battery polarity inside the battery tubes. Although I don't recommend using any device as a battery charger the Drag 3 gives the user 5v fast 2a type-c charging if you are in a pinch with no battery charger handy.





510


The 510 of the Voopoo Drag 3 is located on the back side of the top of the device and any 24mm atomizer will work except a atomizer with a squonk pin in it of course. The 510 does have cuts in it that go all the way to the end so if you connect a atomizer to it that gets the air supply from the 510 you are good to go, also the 510 plate is very slightly raised and will help protect the finish of the top plate from getting scratches from atomizer bottoms.





DRAG 3 FIT AND FINISH


The look of this device is Drag box mod all the way and having really no sharp corners to it make it very comfortable to hold in the hand, even the corners themselves have a rounded feel to them. The SS frame kind of gives off a two-toned appearance with some parts looking brushed and accenting the device looks. There is very small branding of GENE on the body of the device. The material of the inner potion and spine of the device gives a feeling of suede leather and is very smooth with DRAG 3 embossed on one side and VOOPOO embossed on the other side. the very top of the device at the spine has DRAG stamped in raised lettering encased in a box. As you can see (very attractive).






DISPLAY SCREEN


The tradition of a big bright and vivid display screens of past Voopoo devices continues in one of their latest releases. The display screen is very bright being able to view it in direct sunlight and the lettering as well as numbers are very crisp and vivid as well as colorful no matter which 4 modes you choose to use with each having their own color. There is a TC mode that you will have to download in a firmware update from Voopoo's website that I have not done because I do not use TC in my vaping style only wattage so I can't tell you if TC has it's own color apart from the other mode colors.


VAPING MODES

SMART MODE - ( YELLOW COLOR )
Voopoo gives the user a smart mode that limits the wattage that the user can increase to , only allowing wattage to be adjusted to the maximum wattage of the Voopoo coil that's being used so the user can't burn out a coil with too much wattage for said coil, another feature of smart mode is that Voopoo starts the user off with a suggested wattage for said coil, this is just a starting wattage for the user to begin vaping safely. you can rest knowing that in smart mode you won't burn out your coil prematurely. Smart mode allows the user to reach 80w maximum.




RBA MODE - ( BLUE COLOR )
In the RBA mode you can use your own atomizers and put the desired built of your choice and have a maximum wattage output of 80w, you can use RBA mode when using Voopoo coils for a different color screen but you will lose the suggested coil starting wattage recommendation.




SUPER MODE ( RED COLOR )
When in RBA mode when the user reaches 81w the display screen turns red in color and automatically places the device in super mode which allows the user to reach 177w maximum if the user chooses to vape that high, Also in super mode SUPER is highlighted at the bottom center of the display screen.





DUAL UI THEMES


I am very happy to inform you that Voopoo has kept the 2 themes used in previous devices, both look and operate fine but having a choice makes it nice especially for myself because although the Iron theme is a straight forward look of information on the display screen I prefer the Core theme because it is different from the ordinary looking screen that have been shown in the above pictures, below is the Core display theme screen.





MENU

* 5 presses of the fire button to turn the device on/off
* 3 presses of the fire button to change modes
* Press power and up button together to lock/unlock everything
* Press power and down button together to clear puffs


FINAL IMPRESSIONS AFTER USING THE DRAG 3 KIT

Alright folks I've shown you the new device as well as new Pod/Tank and new coils and I have to say that I am a person that has had nothing but good things happen with every Voopoo device I've used and both of these will keep the streak alive for me. As i said earlier the device screams Drag full size very loud with a new attractive appearance.

Having a comfortable device is half the battle on if you like it or not and the Drag 3 doesn't disappoint in the comfort department. Now TC users will be able to enjoy with a download from Voopoo's website, this is something that I don't use but many do and now they can enjoy the Drag 3 also.

I find the new TPP coils and Pod/Tank to be good performers giving maybe a bit more flavor as well as juice capacity without leaking or seepage issues at all. the TPP Pod/Tank is a air lovers dream with clouds that will fill a room with just a few vapes. I applaud Voopoo for making this 510 adapter compatible with every PNP Pod/Tank so the user can have different Pods/Tanks filled with different juices and just pull one off and pop on another TPP or PNP.

As far as super mode, well those wattages are way to high for my style of vaping but I do know 2 people that regularly vape at 150w and above so I guess there is a need for devices to reach those wattages and the Drag 3 can do it. I have only 1 con with this device , there still is no wattage only lock.

So do I recommend the Drag 3 Kit, I will have to say that yes I do simply because it has performed flawlessly with great flavor that I've come to expect from Voopoo and they did not disappoint me with the Drag 3 Kit not to mention that in my opinion it's a very attractive kit. It seems that with each new device from them the bar gets raised a little each time.

I would like to thank Chloe and Voopoo for providing the Drag 3 Kit for this review and I also hoped this review helped anyone looking to purchase the Drag 3 Kit.

THANK YOU
BIGBOB2322

The UniVapo Miso Pod Kit is one of those "half size" pods that have recently been coming out for the folks who want a shorter, more portable pod device for whenever lockdown ends and they go back to the office.

═╣ UniVapo Miso ╠═

00:00 ◄ Intro, specs and close look
04:50 ◄ Vape
07:57 ◄ Thoughts


Login to view embedded media

Smok Morph 2 TFV18 Kit 230W

The SMOK Morph 2 "Make a stir" kit is composed of the Mod Morph 2 Mod and the TFV18 Tank, in essence it is an updated reinterpretation of the previous Morph 219 kit.
There are several interesting aspects for both the mod and the new Tank TFV18.
Enjoy the reading



The package shows on the front an image of the new Smok kit, there are the color indications and the writing "Dual External 18650 batteries".

On the back there are; warnings, hologram and scratch & check.

The packing list and the main features are shown on the sides of the box.



The kit includes:
• 1 MORPH 2 Mod
• 1 Tank TFV18 (7.5 ml)
• 1 0.33Ω TFV18 Mesh Coil (pre-installed)
• 1 TFV18 Dual Meshed Coil of O.15Ω
• 1 spare Bubble Glass
• 1 Type C cable
• 1 User Manual



Morph 2 Mod Specifications:
• Dimensions: 47,5x31.7x88mm
• Weight: 133.5 g
• Output Mode: WW - TC / NI-TI-SS
• Power Range: 1W-230W (VW) / 10W-80W (TC)
• Standby current: <300uA
• Input voltage: 6.4V-8.4V.
• Output voltage: 1.2V-8.2V.
• Reaction time: 0.001s
• Charging voltage: 5V ± 0.2V.
• Charging current: 2A
• Resistance range: 0.1Ω-2.5Ω (WW) / 0.05Ω-2Ω (TC)
• Temperature range: 200 ° F-600 ° F / 100 ° C-315 ° C.

* In countries subject to TPD regulations the Morph 2 Mod kit can be purchased in combination with the TFV-V2 Mini Tank (2ml).

TFV18 Tank Specifications:
• Dimensions: 66.3xØ31.6mm
• Weight: 93.3g
• Material: stainless steel
• Capacity: 7.5ml (Mesh Coil 0.33Ω)
• Capacity: 6.5ml (Dual meshed Coil of O.15Ω)
• Recommended Power: 80-140W (best 100-110W)
• Thread: 510



Currently the Smok Morph 2 kit can be purchased in 8 different color combinations.



First impressions:
I received for this Test the Smok Morph 2 TFV18 kit in “White-Red” color. This Morph 2 kit is designed in red / garnet colored zinc alloy (same color for the TFV18 tank).
The soft two-tone leather (White-Red) covers a large part of the surface, and undoubtedly gives a comfortable touch, the excellent degree of finish and the right leather / metal mix give this kit an elegant sporty look.

Before receiving the kit and based on the images on the internet, I was expecting a much bigger and heavier Mod, I must say that I have been proved wrong, the Morph 2 has quite comfortable dimensions, it carries well and does not weigh too much. I like that!

The new TFV18 tank has a rather imposing appearance without however being more bulky than the previous TFV16.
TFV16 and TFV18 look like twins, however the differences are there and we will see them later.





The front shows the 0.96 "color screen, the USB-C charging socket, the" + "and" - " adjustment buttons, all housed within a metal holder, surrounded by two-tone leather upholstery.

On the back, the frame design houses the large vertical writing “Morph2” in the center, the two-tone coating creates the edge and extends to the sides of the Mod.



The fire button is located on the side, its shape is rectangular of excellent size and is easy to click, on this side you can see the writing "smok Newchip inside" in the center between the two parallel red seams.

On the other side there are 3 white parallel seams on the red background.



The top of the Mod Morph houses a cup with 510 attachment and spring loaded pin, the cup is fixed to the frame by three torx screws. The central position allows to house tanks up to 31mm in diameter without protrusion.

The access door to the compartment / batteries is located in the lower part of the Mod, in addition to logos & brands you can see the opening / closing mechanism and the writing “Designed & Manufactured By Smok”.

Hello and welcome to my second review for Voopoo. This time I will be looking at the Drag X Plus kit that was sent to me in order to do a fair and honest review. After testing the Drag 3, I had high hopes of the performance and operation of the Drag X Plus. Especially since the kit contains the same TPP pod tank and coils. The operation and function of this mod is similar to prior Drag X mods but there have been a couple of changes which I will talk about later in this review. For now, let’s go down and take a look at the features and what is included in the kit.




What’s in the box?

1* Drag X Plus Device
1* TPP Pod Tank 5.5ml
1* TPP-DM1 0.15ohm Coil
1* TPP-DM2 0.2ohm Coil
1* Type-C Cable
1* User Manual





Features:

1. Single 21700/18650 battery
2. 510 adapter
3. Brand new TPP system
4.Type-C charging



















First Impressions:

I’ll start with the packaging. Just like the Drag 3, the cover slid off to expose the Drag X Plus mod and the same TPP tank that was included in the 3 kit. After lifting the insert to get the accessory box, I grabbed the tab to pull it out and it ripped the accessory box due to it being too tight of a fit in the outer box. Definitely the packaging needs improvement.

DRAG X PLUS mod:

I received the Prussian blue in the Drag X plus as well as the Drag 3 and think it is quite attractive. The buttons on this mod seem similar if not exactly the same as the Drag 3. You’re probably wondering by now what is different about this kit compared to the original Drag X. Well the first thing is the Plus has a 510 connection which makes it useable with any 510 threaded tank without an adapter. Also the Plus can use a 21700 battery as well as an 18650 battery. One other slight difference is the new “DRAG” badge located on the rear of the unit on the top. This new badge is supposed to be included on all future Drag models.

Facing the display side, you have the fire button that has no rattle on top with the display directly beneath that. Below the display is the + and – buttons with the USB-C charging port below that. To the right of the display there is just “Gene chip inside” etched into the metal. On the opposite side from that is the Voopoo name etched into the metal. On the rear of the unit there is the soft leather and “DRAG X” stamped in large letters with the word “PLUS” in much smaller letters below that. On top is the 510 connector held in with two screws and it has a spring loaded gold plated center pin. On the bottom is the battery door which has a single arrow indication which way to slide the cover in order to install the battery. It operates very easily. On the inside surface of the battery door it has a – symbol indicating how to install the battery.

The Drag X plus does contain the Gene Fan 2.0 chip for fast firing. There are two modes of operation which are Smart VW and RBA. If you’re not familiar with it, the Smart VW mode senses the coil resistance and automatically sets the wattage in the recommended range and limits you to that range. RBA mode gives the user full control.

The menu or button operation is fairly simple without a lot of bells and whistles. The button sequences are as follows.

- Press the fire button five times to turn the mod on and off

- Press the fire button three times to switch between Smart and RBA modes

- Press both buttons to switch between the two available display themes which are Core and Iron

- Press the fire button and the + button to lock the device. This unfortunately not only locks the adjustment buttons but also keeps the unit from firing.

- Press the fire button and the – button to clear the puff counter




The TPP Pod Tank:



Since the exact same tank and coils were included in the Drag 3 and Drag X Plus kits, I have copied the TPP tank information from Drag 3 review.


The TPP (Tank Pod Push) pod tank is somewhat similar in my opinion to the PNP tank. With differences being the removable drip tip and metal top cap. Also the TPP tank is 5.5ml capacity while the PNP is 4.5ml. The base of the pod has three strong magnets to hold it in place. The coils are a push in style just like the PNP tank coils were. On the bottom of the pod is also the rubber fill port plug. In my opinion, the fill port could have been a little larger. When installed, the coil sticks out about 1/8 of an inch or so in order to reach the electrical contacts inside the 510 threaded base that the pod sits inside of. There is a shoulder inside the base that the surface of the pod where the fill port is rests. I do wish that the top cap of the TPP tank opened for top filling instead of having the fill port on the bottom of the tank like the PNP tank had. One nice thing is that the tank is fairly transparent which makes filling and monitoring the liquid level much easier.

I did notice on the TPP tank that without firing and the airflow closed about half way that I did get a whistling sound. It isn’t obvious at this setting when firing but when closed down even further while firing there is a whistling noise. It’s not a deal breaker but I don’t much care for the noise. This being said, I doubt that people will run the airflow that tight with the included coils but can’t say that for sure. I tried it just to test it but tended to run either coils over half way open.

The new TPP coils are quite different in appearance as the opening on the sides is one large bone shaped opening on each side to allow liquid to saturate the cotton and the coil inside. The TPP mesh coils are supposed to maximize atomization surface and also improve the heating speed. I detected no delay between pressing the fire button and the time vapor was produced. I found the flavor produced to be quite good and have no complaints on that or the amount of vapor produced. That is especially the case with the .15 coil when I ran it at 60 watts. It could fill a room with vapor in no time. However, on the Drag X Plus, I did end up liking the .2 ohm coil at 45 watts the most.





Final Thoughts:

I did very much like the Drag X Plus while testing it. The hand feel is nice and it has a decent weight to it with the 21700 battery installed but it’s not too heavy. In my opinion, it has a very attractive appearance. The simple menu system makes it easy to operate for just about any user. Besides being able to use a 21700 battery, there was an 18650 adapter that makes it more versatile.

I very much liked the flavor and vapor production from the TPP tank and coils but in the end did prefer the .2 coil at 45 watts with the airflow about 2/3 open. The bottom of the TPP tank stayed dry the entire time with the .2 coil. I wanted to mention that because some users have had leaking issues with the PNP coils. It is nice that the mod can use any tank with 510 threading. Not only this but the base for the TPP pod tank can be used with the PNP pod tank.

Just like the Drag 3, the screen was plenty bright for me. I found the Core display theme easier to see the information on. Over all the Drag X Plus is really a decent mod even if you aren’t interested in using the TPP tank and coils.

Would I recommend the Voopoo Drag Plus? Yes I would. It’s really a nice size and weight for a 21700 mod and the TPP tank and coils perform well.

I’d like to thank Voopoo and Chloe for sending the Voopoo Drag X Plus for this review. Also, thanks to those that choose to read my reviews. Below is a link to the Voopoo website if you would like to take a closer look.

VOOPOO VAPE Spark Your Moments

I use my fanny pack!

Hello and welcome to yet another one of my reviews. Today I will be discussing the Voopoo Drag 3 mod with the new TPP pod tank and coils that were sent to me for the purpose of doing a fair and honest review. I own several different Voopoo devices and am very familiar with the PNP series coils and pod tanks. I however, have not had extensive experience with the earlier versions of the Drag mods besides the Drag Max which I do own. I will try to cover the features to the best of my ability and obviously give my opinion on the mod and tank. So, without further ado, let’s go take a look.




What’s in the box?

1* DRAG 3 Device
1* TPP Pod Tank (5.5ml)
1* TPP-DM2, 0.2ohm
1* TPP-DM1, 0.15ohm
1* Type-C Cable
1* User Manual





Specifications:




Features:

1. Upgraded GENE Fan 2.0-Born for power
2. Brand new TPP system: Single mesh with dual heating zone of the TPP coils for more efficiently and evenly heating and 5.5ml TPP atomizer
3.Super Mode/RBA Mode/Smart Mode + TC Mode (firmware download required)
4.Dual 18650 battery & Type-C charging
5.Classic silver-plated outfit regression
















First Impressions:

Let me start with the packaging. For such a nice kit, the packaging was not impressive. The outer sleeve slid off to expose the very nice looking Drag 3 mod and the new TPP tank. Once I removed those and lifted the insert up to get to the accessory pack, I found the accessory box with a pull tab to lift the accessories out of the box. The accessory pack was so tight in the outer box that the pull tab ripped down the face of the box and ruined the accessory pack box. I know packaging isn’t everything but I feel like such a beautiful mod kit deserves better packaging. This same thing also happened when trying to remove the accessory pack for the Drag X Plus. I definitely think Voopoo can improve on product packaging.

Now that this negative is out of the way, let’s move on to some positives. To me the Drag 3 and TPP tank are a very attractive combination. I received the Prussian blue version which I very much like since blue is my favorite color. I was a little surprised that the Drag 3 wasn’t a really heavy device. It has a decent weight to it with the two 18650 batteries installed but is not so heavy as to make me tired from holding it like I have experienced with some dual battery mods in the past.

The kit included the Drag 3 mod, TPP pod tank, DM1 coil rated at 60-80 watts, DM2 coil rated at 40-60 watts, USB-C charging/update cable, and user manual.



The Drag 3 Mod

The Drag 3 mod in my opinion is very nice looking. The silver with the Prussian blue that I received is a nice match On the face of the device starting from top to bottom is the round fire button which is a little clicky and does not rattle at all. Below that is the 1.08 in. TFT display with the + and – buttons below that followed by the USB-C charging port near the bottom. Facing the display, the right, rear, and left sides are covered with a soft padded leather wrap that is almost like a brushed leather or something. On the right side is the Voopoo name stamped into the leather and on the left side in much larger letters is DRAG 3 stamped into the leather with the word GENE written on the silver metal closer to the front in somewhat small font. On the rear of the device is the new metal badge that says DRAG. This is supposed to be the badge for all future Drag devices produced. I like the looks of it. On top is the 510 connection held in by two screws and the gold plated center pin is spring loaded. On the bottom is the battery door with three arrows indicating which way to slide the door in order to open it to install the batteries. On the door that flips up, there is a + and – symbol indicating how to install the batteries correctly.

The Drag 3 comes with three available modes which are Smart VW, RBA, and Super. Super is only available when the resistance is between .1 and .3 ohms and the wattage setting is greater than 80 watts. There is a software download available that will allow you to also have Temperature Control but it is not on the device as it is packaged. I’m not really sure why that is. Why not have all four modes available right out of the box? I’m guessing because not that many people use TC as use VW but if it were me then I’d have it already installed on the device. I did in fact go to the Voopoo website and download the update. It’s not hard to do. First you go to Support at the top of the page. That will take you to a page with a listing of devices. Click on Drag 3, and then software. It will show two downloads available. First download and install the configuration software. Then download the update and from inside the Voopoo program choose the file from your download folder and update the device. You will then have the latest software which includes the Temperature Control mode. I am not a big TC user but did try it out and it seemed to work pretty well.

The button and menu operation are as follows.

- Press the fire button five times to turn the device on and off

- Press the fire button three times to change between modes

- Press the fire button and the + button to lock or unlock the entire device

- Press the fire button and the – button to clear the puff counter

- Press the + and – buttons to change between the two display options which are Iron and Core



I personally like the core display option since it makes the display and numbers a little easier for me to read. The Drag 3 contains the Gene Fan 2.0 chip which boasts .001s firing. I have no way of measuring this but do think that the mod fires very quickly.







The TPP Pod Tank






The TPP (Tank Pod Push) pod tank is somewhat similar in my opinion to the PNP tank. With differences being the removable drip tip and metal top cap. Also the TPP tank is 5.5ml capacity while the PNP is 4.5ml. The base of the pod has three strong magnets to hold it in place. The coils are a push in style just like the PNP tank coils were. On the bottom of the pod is also the rubber fill port plug. In my opinion, the fill port could have been a little larger. When installed, the coil sticks out about 1/8 of an inch or so in order to reach the electrical contacts inside the 510 threaded base that the pod sits inside of. There is a shoulder inside the base that the surface of the pod where the fill port is rests. I do wish that the top cap of the TPP tank opened for top filling instead of having the fill port on the bottom of the tank like the PNP tank had. One nice thing is that the tank is fairly transparent which makes filling and monitoring the liquid level much easier.

I did notice on the TPP tank that without firing and the airflow closed about half way that I did get a whistling sound. It isn’t obvious at this setting when firing but when closed down even further while firing there is a whistling noise. It’s not a deal breaker but I don’t much care for the noise. This being said, I doubt that people will run the airflow that tight with the included coils but can’t say that for sure. I tried it just to test it but tended to run either coils over half way open.

The new TPP coils are quite different in appearance as the opening on the sides is one large bone shaped opening on each side to allow liquid to saturate the cotton and the coil inside. The TPP mesh coils are supposed to maximize atomization surface and also improve the heating speed. I detected no delay between pressing the fire button and the time vapor was produced. I found the flavor produced to be quite good and have no complaints on that or the amount of vapor produced. That is especially the case with the .15 coil when I ran it at 60 watts. It could fill a room with vapor in no time.






Final Thoughts:

Over all I very much enjoyed testing the Voopoo Drag 3 mod with the new TPP tank. The mod is fairly comfortable to hold even though it is a dual battery mod. I felt like the leather wrap on it was very nice and liked how the lettering was stamped into the leather.

I found the display screen to be plenty bright and preferred the core display mode to make reading it a little easier. The display at 1.08 in. is a little larger than what most mods I’ve reviewed have had and did like the extra space to make room for the information.

I did like the TPP tank and coils but don’t really know that I like them that much better than the PNP tank and coils. The PNP pod tank will fit and operate in the TPP base so if you have PNP coils like I do, you don’t have to go and start stocking new coils if you don’t want to. However, the PNP coils will not work in the TPP pod tank and vice versa. You can also just use the Drag 3 like any other mod with a 510 connection.

I did have some leaking from the first .15 ohm coil but pulled another one from the Drag X plus kit that I will be reviewing soon and haven’t had any leaking with the second coil as of yet. The .2 coil was completely dry the entire time I used it at 45 watts. Not because of the first coil being bad, I did like the .2 coil better simply because it fit my style of vaping better.

In the current market it seems like there is a new pod or pod mod every day. It gets a little redundant after a while in my opinion. It was refreshing to me to see Voopoo release the Drag 3 kit with a 510 connection that can be used with the TPP, PNP, or any tank with a 510 threaded connection.

So, would I recommend the Voopoo Drag 3 kit to others? I would. Even if you aren’t a high output user, the dual batteries will give you long life. The mod is attractive to look at and functions well in my opinion. With a software upgrade, it can operate in TC mode also. I’m just not understanding why the update wasn’t already installed when it was shipped. Perhaps this will change when the Drag 3 is in full production and released.

A big thanks to Voopoo and Chloe for sending the Voopoo Drag 3 kit for me to review and thanks to those that choose to read my reviews. Below is a link to the Drag 3 product page.


VOOPOO VAPE Spark Your Moments

Hello again fellow vapers

Today i will review the Univapo Miso Pod Kit which i was sent by @UNIVAPO_Rebecca.

Couple of FYI's before i start the review:

- @UNIVAPO_Rebecca Sent me 2 Miso Pod Kits along with a box of 3 pod replacements.
I did keep one Miso for the review but the other i gave away to a friend who works at the gas station.
He is or better yet he was a smoker,just had his second kid and money tight for him so he had to cut down on smoking.
I donated the one of the Miso Pod Kit along with the 3 Miso pod replacements to him and took him to my local vape shop so he could get some nic salts.
I hope you don't mind @UNIVAPO_Rebecca that i gave it away but you know i like to help people and so far he has been 3 days off the cigarettes and with no plan to going back so i call that a small victory.

-I do no use nic salts to vape,i use my usual 70% VG/30% PG with 3mg nicotine.
I used the same e-liquid i usually vape to test this Pod Kit.

-This review is done by someone who doesn't use these kind of devices so i will approach this review as someone who wants to quit smoking or needs something small and portable to keep in the glove compartment in case he can't find his main vaping device.

Time to get started.

The Univapo Miso Pod Kit,contents of the package:


1 x Miso Pod(2ml)
1 x Miso Battery.
1 x Type-C USB Cable.
1 x User Manual.

Simple packaging with everything you need to get started.

Specifications:

Different color combinations:

Some more technical details of the Univapo Miso Pod kit:

Ok enough information given,first impressions:

Once i took it out of the box i was impressed by its size,i was also impressed by the way it felt in my hand.

Feels sturdy and well made even thou it is really small,I'm a big guy with big hands so it did feel a bit small for me,here is a hand check so you can see the proportions:



Time to vape:

Refilled the pod with my usual e-liquid and let it sit for 15 minutes so it get the coil nice and primed.

This device has both the option for Restricted Direct to Lung and Mouth to Lung:



Just have to take the pod out and turn it around and you can switch from one mode to another.
Started vaping with Restricted Direct to Lung mode and tried that for a bit,pretty good flavor i must say but a bit restricted for my usual type of vaping so i then took the pod out and turned it around,inserted it and voila!! ready to give Mouth to Lung mode a try.

Much better this time,good flavor and a decent cloud for this type of device.

PROS

- Great flavor,something i wasn't expecting from a device with this size
- Battery duration is very good
- C-Type USB charging? enough said,win win!!
- Looks wise i am loving it,combination of metal (aluminum i think) and plastic looks aesthetically pleasing
- For a first time user it is really simple to use,which is a great pro since this is the perfect device to quit smoking cigarettes and start vaping.
- Option to choose between Draw and button activated vaping is another pro.
In this case i didn't notice a difference in performance when using it without pressing the button.
You will get the same performance if you press the button or just draw.
- Charging time is a major pro,i mean 20 minutes? wow yeah that is a really good thing

CONS

- The only con i can come up with is that you only get one pod in the box.
In my honest opinion an extra pod in the box would be a nice addition.
Not saying this is the case but maybe one of the pods in the box is faulty,then you are stuck without a pod and unable to use the device.
Even if the price has to be adjusted i would include a second pod in the packaging.


Final thoughts:

Really cute device that is sturdy and well made.

Who would i recommend this to?

First time vapers,i mean the device is really easy to use,fast charging time and small so you can carry it in ANY pocket.

Also i would recommend this to vapers who are easily distracted and can sometimes forget to bring or carry their mod.
Due to it's small size you can leave it anywhere you want,the glove compartment of your car for example and in case you forget your main vaping device you can always use this to meet your vaping needs.

Big shout out to @UNIVAPO_Rebecca for sending me Miso pods (and coils for my UA25 tank)

Hope you guys enjoyed reading my review.

Thank you.

P.S: Sorry Rebecca for the late review,things hectic at home and i haven't had much spare time.

The VOOPOO DRAG 3 Kit is a new high performance vape mod that continues the epic legacy of the original DRAG. Powered by dual high amp 18650 batteries (sold separately), the DRAG 3 Mod utilizes the upgraded GENE.FAN 2.0 chipset to reach up to max 177W output with multiple working modes such as Super Mode, Smart Mode and RBA Mode to provide an ultimate solution for performance and ease-to-use. Following the original DRAG, the DRAG 3 is constructed from platinum colored metal and leather, features a beautiful chassis with improvements in details for a visually stunning looking. Utilizing the innovative TPP atomization system which is born for big clouds, the DRAG 3 TPP Tank can hold up to 5.5ml of your favorite E-juices, adopting the new TPP mesh coils to deliver unexpected flavor burst in a smoother way.





Features:
Elegant and Flamboyant Design
Leading, Again - Upgraded GENE.FAN 2.0 Chip
0.001s Extreme Ignition
Innovative Super mode+Smart/RBA/TC mode
Max 177W Output Power
Dual 18650 Batteries
New Coil Bring Better Flavor
TPP Atomization System
...

----------------------------------------------------

The VOOPOO DRAG X Plus Pod Kit which is powered by single 18650/21700 battery. The VOOPOO DRAG X Pluscan support 100W max output with the upgraded GENE FAN 2.0 Chip. Equipped with New TPP Pod Tank for amazing flavor. And the VOOPOO DRAG X Plus device is also compatible with PnP Pod Tank. Please take the new VOOPOO DRAG X Plus device and enjoy the excellent vaping.





Features:
Max 100W Output Power
Advanced GENE FAN 2.0 Chip
The New TPP Pod Tank
Adapted to 510 interface
Support 21700/18650 Battery
5V/2A Type-C Fast Charging
Compatible with PnP Pod Tank
...

Click here for more:

Voopoo Drag 3 Kit: VOOPOO Drag 3 Kit 177W With TPP Tank 5.5ml

Voopoo Drag 3 Mod: Voopoo Drag 3 177W Mod

Voopoo Drag X Plus Kit: Voopoo Drag X Plus 100W Mod Pod Mod Kit

Voopoo Drag X Plus Mod: Voopoo Drag X Plus 100W Pod Mod

20% OFF with Coupon Code: VOOPOO20
Expire on 30th Jan

Product introduction
Uwell Crown 3 Sub Ohm Tank is one of the best sub ohm tanks currently on the market.Top filling design, easier and cleaner refill. Uwell Crown 3 tank is constructed of the highest quality food-grade stainless steel,measures 24.5mm in diameter with upgrades across the board as well as aesthetic improvements with the launch of colorful drip tips.Uwell Crown 3 Sub Ohm Tank has a capacity of 5ml/2ml and can be refilled from either the top or the bottom

Parameters:
Diameter: 24.5mm
Material: Stainless Steel
Tank Capacity: 5ml/TPD 2ml
Connection: 510 Connection
Coil: 0.25Ω Larger Clouds;(80-90W)
0.5Ω Balanced Clouds and Flavor(70-80W)
0.8Ω Beast Flavor, Long Lifespan and Lower Juice Consuption
Filling Method: Anti-Leak Threaded Top-Fill Method

Features:
-Crown III Parallel Coil Design
-Top Filling and Bottom Filling Design.
-Improved Chimney Design for Stronger Flavor.
-Cone-Shape Positive Connector on Coil for Smoother Airflow.
-Higher power, large clouds, smooth airflow, strong flavor
-Superior Stainless Steel Construction

Package includes:
1 x Crown III Tank (0.25ohm Pre-installed)
1 x Interchangeable Coils 0.5ohm
1 x Replacement Quartz Glass Tube
1 x Extra Rubber O-ring
1 x Manual
1 x Crown 3 key
1 x Drip tip cover

Vapefly Kriemhild II Sub Ohm Tank!


Efun.top new arrival Efun New Arrivals - Latest Vaporizers and Vape device
Sale Products Efun.top Vape Sales Online Shop
US Warehouse Vapes and E-juice in US Warehouse - Efun.top

Hey guys. Today let's check out a new one-time device named Glamee XTRA. If you are looking for disposables vapes that can offer more than 1500 puffs, then this one may worth a try.

Glamee XTRA is draw-activated and delivers a tight MTL draw. They're small, light, and easy to slip into a pocket. Provides a variety of gradient colors that can follow changes in light and temperature. Unique three-color metal decoration rings make it more elegant. At the same time, the flat cigarette holder on the top uses eco-friendly materials to ensure quality. Glamee XTRA has an LED light that lights up with each draw, which indicates the vape battery life. It is powered by a 1200mAh built-in battery. This gives more than enough time to reach the peak effects when vaping.

This vape allows approximately over 1800 puffs to satisfy your all-day pleasure. Glamee XTRA Disposables Vape comes prefilled with 5.6ml 5% of best e-liquid from the top liquid supplier Zinwi. This 50mg strength is more than enough to satisfy heavy smokers/vapers and it delivers a nice and pleasant throat hit. It adopts an individual e-liquid cup to make sure the liquid clean and no spill. Smooth and big fog provides you the best vaping experience that you ever had. Best flavors selected from more than 100 options to meet popular taste satisfaction.

Like the Glamee XTRA? Get it here: Glamee XTRA Disposable Vape Kit 1800 Puffs 1200mAh

You may also like:
puff plus for sale
helix bar max price