Hi, guys! Welcome to New Product Introduction! I have a question: do you need an RTA at present? Today let me introduce you one RTA named Elite Experiment 3 MTL RTA Clone. Now let’s take a closer look at the RTA below.

The Elite Experiment 3 MTL RTA Clone is made from stainless steel in 22mm diameter. The MTL RTA comes with two air towers and two fireplaces with different geometries to obtain the optimal aromatic yield.
This MTL RTA is with bottom airflow adjustment control, with holes 0.8mm / 1.0mm / 1.2mm / 1.4mm / 1.6mm. There are two filling ports on the top cap for top refilling conveniently.



Main Features:
510 threading connection
Stainless steel construction
2.5ml capacity
Comes with 2 air towers (1 pre-installed and 1 spare in the package)
Airflow adjustable control from the bottom: 0.8mm / 1.0mm / 1.2mm / 1.4mm / 1.6mm
POM MTL 510 drip tip
Dual-pole, single coil building deck
Diameter: 22mm

If you want to get one, you can come here:
Elite Experiment 3 MTL RTA >>>

PC Tank + 510 Drip Tip:
Replacement PC Tank Tube + POM 510 Drip Tip Kit >>>

Have you got one Freemax Maxpod Open Pod System in hand now? So how do you refill Freemax Maxpod Pod? Is it easy for you to refill Maxpod?

Freemax Maxpod is one open pod system kit with 1.0ohm and 1.5ohm NS Mesh Coil options, and you can refill any kind of vape juice because it can be compatible with 99% of flavor categories in the market. This pod cartridge features a convenient side-fill solution with the clear e-liquid level inside.



So how to refill this Maxpod Pod? Here are the steps below:
1. Simply detach the cartridge from its base. Grasp the top of the pod cartridge and then pull upwards it away.
2. Slight open the silicone plug and tilt the pod on its side to refill e-liquid.
3. Once complete, close the silicone plug and put the pod back into the Maxpod.

As we all know, when we fill the pod for the first time, we need drip a few drops of vape juice onto the wick cotton first. Then push the coil into the pod then fill the pod. Let it stand 10-15 minutes to get wick cotton completely saturated for helping prolong the life of your coil.

Hi from Pennsylvania

https://www.2fdeal.com/search/?Keyword=alpha&CateId=375$7.99 Starss Alpha Mesh 24mm RDA

Features
Maximum Diameter 24mm
Deck Diameter: 21.8mm
Coil Resistance: 0.15ohm (Mesh Coil)
Wattage Range: 50~80W
Recommended Wattage: 65~75W
Threading: 510 thread
Drip Tip: 510 Acrylic Drip Tip
Juice Feeding Method: Drip / Squonk
Adjustable airflow for purer flavor
Side intake honeycomb structure
Dual mesh coil for massive cloud and pure flavor
https://www.2fdeal.com/search/?Keyword=manik&CateId= Wotofo Manik 80W 18650 Pod Kit 4.5ml

Features
Battery: Powered by 1 x 18650 battery (not included)
Power output: 5~80W
Pod capacity: 4.5ml
Resistance (recommend watt): D15 Clapton M Coil 0.2ohm (Best: 45W~55W), D14 A1 M Coil 0.2ohm (Best: 35W~40W), D13 A1 NexM Coil 0.2ohm (Best: 37W~43W, not included), D11 Single Net M Coil 0.2ohm (Best: 45W~55W, not included)
Display: 0.96inch TFT Screen
Charging current: DC 5V / 1.5A, micro-USB
Single 18650 cell with 80W max output
Great sub-ohm DL vaping
0.96-inch TFT Screen
Nex chip for smart VW
Innovative D Series Mesh coils for better flavor
Easy top refill design
Adjustable airflow system
Multiple functional protections
https://www.2fdeal.com/search/?Keyword=tauren&CateId=ThunderHead Creations THC Tauren Max Hybrid Semi-Mechanical w/X Chip 2-in-1
Coupon Code:MAPTHCMAXX

https://www.2fdeal.com/search/?Keyword=geyser&CateId=$52 VapX Geyser 100W VW 18650/20700 Pod Kit
Coupon Code:MAPVAPX


Features
Pod Material: PC
Power Range: 5~100W
Capacity: 6.5ml / 5ml
Resistance Range: 0.1~3.0ohm
Output Voltage: 0.5~8V
Powered by 1 x 21700 / 18650 Battery (Not included, with a sleeve)
Standard Coils: XCoil Model 10 / XCoil Model 15s
Compatible Coils: Coils Of Model 10n/ Model 15d(sold separately)
Adjustable wattage from 5W to 100W
Innovative two AFC pods for precise air control
Tight MTL / Loose MTL / Restricted DL / Loose DL
Single / Dual Mesh XCoils
Easy top refill system
Bust-boost converter for stable and consistent output

Vladdin's newly released product --Vladdin X. It’s a rechargeable device carrying with 2 disposable pods. It’s perfect can be carried in our pocket to take outside. It’s so convenient! Multiple flavors can be chosen! You guys will love it!

The rechargeable kit is made of metal, and it's silver gray, matte, and looks simple and stylish. The PLUG is made of black plastic, which is wrapped around the charging part as isolation. The method is easy, just insert the PLUG into the X Kit. There are two small grooves on both sides for fixing plug, which can be inserted easily and is very convenient. It's comfortable to hold and feels heavy, not light plastic, very textured. Both business and daily use can be satisfied.




Many people worry about the battery power of disposable pod. When the battery is low, the taste of e-juice cannot be used well. In order to solve this problem, we propose a design that can be recharged at any time to keep the battery full, to keep the pod running normally, and to maximize its effectiveness.

In order to improve the oil spill and keep the flavor condition, we finally decided to adopt the disposable pod. There are six flavors. Lemon Sode, Summer Mix, Blueberry, Dr.Pepsi, Cool Grape, and Tcopical Fruits. The nicotine content is 50mg and the volume is 3.2ml. The taste is as good as ever, and the palate is rich and silky. This is one of our best guarantees. A Plug has 1600puffs, and it lasts about 3-5 days. Not bad, huh?


Our reviewers have tested this product and they are unanimous in their approval. It's very rich and lasts as long as a pineapple stick or longer. In addition, the air limit is perfect and the price is reasonable for only 18.99. Although the testers had reviewed a number of e-cigarette products, their reviews of VlAddin X were mostly satisfying and enjoyable. And it's a small one that fits perfectly in your pocket and for everyday use. Is a very cost-effective and high-performance disposable pod. So we are very confident about this product.

Packaging

Do you want to grab Yocan UNI Pro new color? Here is your chance, don't forget use the discount code (YocanF) when you check out on Yocan retail site.

To provide you the better experience, the UNI Pro lets you customize your vaping experience by the voltage range starts from the low voltage of 2.0V to 4.2V. Yocan provides 5 new colors: Dark Blue, Apple Green, Green, Purple and Rosy.



Features:

Fit all cartridges
Voltage Range: 2.0V to 4.2V
15 seconds cut-off
Preheat Mode: Click the power button 2 times
OLED Display
Built With Hanging Hole

Get your new color Yocan UNI Pro vape mod today on www.yocanonline.com

Didn't do my homework before buying the Iconic. It's intended for squonking. When used for dripping, the juice can leak out of the air ports. Color: Shiny gold. All original parts are still in the case.
Iconic RDA | VANDY VAPE® Full Steam Ahead

Will trade for an Engine, any color.

If you have an Engine that you'd like to sell outright, I'm interested.

Ed

My fetch pro stop working. Hubbys stop first i can charge his and its fine take it off the charger and nothing. Then today my screen went dim i can't even get a hit from it. Question what is the best device out there. He had a smok wocket after 2 months his stop charging and my wocket still works fine. Need a better brand then smok any good suggestion. HELP

Ok, this may or may not last very long, but I've never seen a thread on the ECF dedicated to cooking.
Baking, Grilling, Frying, Boiling .... doesn't matter. Some of the Ladies might have some recipes/ techniques they might like to share, and I'm sure there are a few of the Men Folk who know their way around a Grill. Feel Free to contribute your favorite recipes, maybe we can each find a new culinary favorite !
So.... Let's Get Cooking !

The Steamcrave Aromamiser Supreme V3 is the latest in the main tank series of the Aromamizer from Steam Crave. The Aromamizer is split into two lines, the standard, and the Supreme, however, for a while now the Supreme has been lagging behind the non Aromamizer tanks (Titan and Ragnar) when it comes to the tech...not any more though.

═╣ Steamcrave Aromamiser Supreme V3 ╠═

00:00 ◄ Intro and specs
02:41 ◄ Close up and build
17:20 ◄ Vape
19:11 ◄ Thoughts


Login to view embedded media

Folks, I apologize for the newbie questions but trust me, I've spent a lot of time reading and still have some confusion - partly because I find contradictory information everywhere. I hate when people come on forums asking questions before doing their research but I've tried.

While I've been vaping for over a year, it's been with a Juul. (3rd party pods) My flavored pod horde is about to be exhausted so here I am.

What I'm looking for is something comparable to what my Juul with 3% pods gave me - smoothness (I do NOT want a harsh throat feel like many seem to be after), availability of nice flavors, no need for a lot of nicotine, no need for 'clouds'. I was using the 3% not really because of the lower nicotine but because it wasn't as harsh as the 5-6% pods.

I guess my question is what type juice and coil resistance should I be looking for? I purchased a Smok NFix and like the device but I seem to be getting a tad bit of juice in my mouth regardless of what wattage I set it to. (I've tried multiple .8 Ohm coils and 3mg juice labeled for "subohm" use) I also seem to be getting a lot more nicotine than I'm used to.

I've also tried a Novo 2 and occasionally get that juice in my mouth but not nearly as often. I also seem to be getting a lot more nicotine than I'm used to.

Obviously I'm doing something wrong.

Another thing I'm confused about is the wide range of nicotine strengths - 3% on up to 55+%? I must be missing something because the 3% seems to be killing me, again I must be doing something wrong.

Suggestions for what I should be looking at to find something comparable to the 3% Juul?

Thanks

Please visit us to see in stock juice, find your favorites here, then enter "flash20" at checkout for 20% off every ejuice..

Hello,

Today I have a tank that is actually not different vaping wise from the Ares-2 the Ares-2 LE (Limited Edition). I did a full review on the Ares-2 a while ago back in June: Ares 2 review







This review is more like a 'design review'. Innokin decided to make some changes to the Ares-2, probably after listening to the community. If you want to know more in-depth on the Ares-2 itself, please refer to the earlier mentioned review.

Some information from the Innokin Website:













Packaging:



Review:

So, what is different? Only the looks really, it vapes the same and the build deck is exactly the same as on the Ares-2. One more important change is that they included a torx screwdriver in the LE kit, which comes in handy for replacing the fill-port rubber.

Texture/finish, paint job, drip-tip, O-ring colors and branding is what has changed. And I straight away can say the LE edition looks much better.

If it is about the texture, they removed the carved in design, they kept it smooth and the paint went from shining to matte with a sandblasted finish. It still grips very well and unscrewing the base is no issue at all. Good improvements.







The drip-tip looks and feels much better, it is made from metal and the top finish out of higher-grade plastic. It reminds me a lot of the Vandy Vape Berserker drip-tip. It has the child lock system still implemented which I like.

The dark version has black O-rings and the silver (Flint) has white O-rings. On the black version it looks so much better compared to the regular Ares-2, especially with the dark tinted glass, beauty!





For me the most important change, something I complained about a bit in the Ares-2 review, is the branding on the outside of the bell(chamber). Before it was full of Platform Series and the names of Phil and Dimitri. Now it simply says Ares-2 on one side and LE on the other side. Design wise a massive improvement in my opinion.

Overall all changes are well received by me. The tanks look much more high-end than the original Ares-2.

As mentioned, it vapes very well, flavor wise it is not the best RTA out there. After several months of use I can say that the flavor depends a lot on the flavor profile. The flavor on cream/desert juices is really good, for fruit flavors it is a bit dull, but you still can pick up the notes.





I did find a way to improve the overall flavor performance, 8 wrap 27g kanthal very slightly spaced, used Phils build tool for that. Once placed on the deck, push down the centre of the coil almost touching the inner airflow. It also works much better with Clapton mtl-coils. For me best flavor is with the inner airflow slot fully open.



Conclusion:

All changed they made on the Ares-2 LE are just very welcomed changes, kind of a pity the original Ares-2 was not released straight away as the LE version. It is a fantastic looking RTA now.

It is an easy RTA with its build deck and the vape from it is pleasant. Flavor wise it is not the best RTA out there, but it does the job well and the looks an ease in use for me make up for the flavor part.

Thank you for reading, let me know if any questions,

Sjoerd

Hello,

Today I have a tank that is actually not different vaping wise from the Ares-2 the Ares-2 LE (Limited Edition). I did a full review on the Ares-2 a while ago back in June: Ares 2 review







This review is more like a 'design review'. Innokin decided to make some changes to the Ares-2, probably after listening to the community. If you want to know more in-depth on the Ares-2 itself, please refer to the earlier mentioned review.

Some information from the Innokin Website:













Packaging:



Review:

So, what is different? Only the looks really, it vapes the same and the build deck is exactly the same as on the Ares-2. One more important change is that they included a torx screwdriver in the LE kit, which comes in handy for replacing the fill-port rubber.

Texture/finish, paint job, drip-tip, O-ring colors and branding is what has changed. And I straight away can say the LE edition looks much better.

If it is about the texture, they removed the carved in design, they kept it smooth and the paint went from shining to matte with a sandblasted finish. It still grips very well and unscrewing the base is no issue at all. Good improvements.







The drip-tip looks and feels much better, it is made from metal and the top finish out of higher-grade plastic. It reminds me a lot of the Vandy Vape Berserker drip-tip. It has the child lock system still implemented which I like.

The dark version has black O-rings and the silver (Flint) has white O-rings. On the black version it looks so much better compared to the regular Ares-2, especially with the dark tinted glass, beauty!





For me the most important change, something I complained about a bit in the Ares-2 review, is the branding on the outside of the bell(chamber). Before it was full of Platform Series and the names of Phil and Dimitri. Now it simply says Ares-2 on one side and LE on the other side. Design wise a massive improvement in my opinion.

Overall all changes are well received by me. The tanks look much more high-end than the original Ares-2.

As mentioned, it vapes very well, flavor wise it is not the best RTA out there. After several months of use I can say that the flavor depends a lot on the flavor profile. The flavor on cream/desert juices is really good, for fruit flavors it is a bit dull, but you still can pick up the notes.





I did find a way to improve the overall flavor performance, 8 wrap 27g kanthal very slightly spaced, used Phils build tool for that. Once placed on the deck, push down the centre of the coil almost touching the inner airflow. It also works much better with Clapton mtl-coils. For me best flavor is with the inner airflow slot fully open.



Conclusion:

All changes that they made on the Ares-2 LE are just very welcomed changes, kind of a pity the original Ares-2 was not released straight away as the LE version. It is a fantastic looking RTA now.

It is an easy RTA with its build deck and the vape from it is pleasant. Flavor wise it is not the best RTA out there, but it does the job well and the looks an ease in use for me make up for the flavor part.

Thank you for reading, let me know if any questions,

Sjoerd

DOVPO Top Gear DNA250C 200W Box Mod, made of Aluminum Alloy, features Evolv DNA250C Chipset. DOVPO Top Gear DNA250C Box Mod is powered by dual 18650 batteries with max 200W output. DOVPO Top Gear DNA250C provides VW/ TC(Ni, Ti, SS) / Replay modes to meet different needs. DOVPO Top Gear DNA250C mod is equipped with 0.96 inch TFT Color screen to show detail vaping information.



Parameters:
Size: 88.6* 54.2* 27mm
Material: Aluminum Alloy
Battery: dual 18650 Batteries (not included)
Output: max 200W
Output Voltage: 0.2-8.0V
Display: 0.96 inch TFT Color Screen
Modes: VW/ TC(Ni, Ti, SS) / Replay modes
Resistance Range: 0.08-3.0ohm
Thread: 510


Features:
Aluminum-Alloy Chassis Construction
Evolv DNA250C Chipset
Powered by dual 18650 batteries with max 200W output
Support VW/ TC(Ni, Ti, SS) / Replay modes
0.96 TFT Color Display Screen
Top Gear Style Adjustment Knob

Packages:
1* Dovpo Top Gear
1* MicroUSB Cable
1* User Manual
1* Warning Card

Hey guys. This time I'm gonna bring you a new pod system named Vaporbucks Simmi. If you are tired of kinds of mod pod devices, then you might as well give it a shot.

Vaporbucks Simmi Kit is an open pod system using multiple innovative technologies, designed to bring the highest flavor and change your vaping lifestyle. Vaporbucks Simmi is equipped with a 520mAh large-capacity built-in battery and a 1.6ml side-refiling Pod to bring you the most satisfying atomization experience. Simmi uses a simple but detail-focus design, aluminum alloy one-piece body, and compact size to provide comfort and portability. Equipped with an internal, rechargeable 520mAh battery, the Simmi has all the power you need for hours of smooth vaping. The LED battery light indicator on the side of the device provides three-tier battery life feedback, so you're always in the know. Simmi has two ways to activate the device: Auto Draw activate & Button activate. Respond quickly, fire immediately, and enjoy a satisfying airflow all day.

Vaporbucks Simmi Pod has a 1.6ml capacity and features a comfortable mouthpiece, silicone stoppered side-fill method, and with M-shade window for visual e-juice level. Simmi Pod integrates 1.2ohm coil inside, and Simmi Pods with 1.0ohm/1.4ohm coil is also provided. Simmi uses the innovative SIMCELL atomization system to restore the essence of E-juice flavor by more than 99%. Dual airflow (DTL&RTL) system within the single pod. Flip the Simmi Pod to immediately enjoy a different airflow. In addition, the Simmi Pod also uses a quadruple condensate system inside, which can minimize the risk of condensate leakage.

You may also like:
grus mod review
lost vape thelema review

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a VV & VW Mod at present? Today let me introduce you one mod named KSL Box S 80W Box Mod. Now let’s take a closer look at the mod below.

KSL Box S Mod boasts a single 18650 battery (not included) that delivers up to 80 watts of power. The S Mod is managed by the KSL V2.0 chipset, supports VW, TC (Ni, Ti, SS), and Bypass modes with 0.1s fire speed. You can check the settings via the OLED screen, it's very convenient. Made from zinc alloy and stainless steel, KSL Box S has a fine appearance, and it is durable.




Main Features:
Size: 87 x 40 x 28mm
Output Power: 80W (Max)
Display current: 25mA
Charging: Micro USB port
Screen: OLED display screen
Resistance range: 0.1~2.5ohm
Modes: VW / TC and Bypass modes
Material: Stainless steel + Zinc alloy
Powered by 1 x 18650 battery (not included)
Powered by the advanced KSL V2.0 chipset
Single 18650 battery with 80W max output
Durable metal construction with ergonomic design
Supports VW, TC and Bypass modes with 0.1s fire speed

If you want to get one, you can come here:
KSL Box S Mod >>>

Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Mechanical Mod at present? Today let me introduce you one mod named Hellvape Trishul V2 Mech Mod. Now let’s take a closer look at the mod below.

The Original Hellvape Trishul V2 Mechanical Mech Vape Mod Short is an updated version of Hellvape Trishul Mod. It features 27mm diameter tapers to 25mm. Adopting innovative, strong and stable magnet attraction button design, it is comfortable to use in a long term. Besides, it is powered by single 21700, 20700 or 18650 battery (battery not included). And it includes the 18650 battery adapter. Moreover, it is designed with built-in Canted Coil Spring and large copper contact with mirror polishing craft for better conductivity.




Main Features:
Diameter: 27mm diameter, tapers to 25mm
Height: 94.9mm
Material: Copper
Connector: 510
Battery: Single 21700 / 20700 / 18650 Battery (not included)
Recommended Resistance: 0.2ohm
27mm diameter tapers to 25mm
Innovative magnet attraction button design with comfortable using in a long term
Strong and stable magnetism by powerful N52 NdFeB black magnet
Automatic floating battery adjustment by silicone ring
Accepts single 21700, 20700, or 18650 battery (not included)
18650 battery adapter included
Switch with built-in Canted Coil Spring for better conductivity
Large copper contact with mirror polishing craft for better conductivity

There are three colors for you to choose, so which color is your favourite? If you want to get one, you can come here:
Hellvape Trishul V2 Mechanical Mod - Black >>>
Hellvape Trishul V2 Mechanical Mod - Brass >>>
Hellvape Trishul V2 Mechanical Mod - Copper >>>

Caliburn G, a new member of Caliburn family, with the major genes of Caliburn series (Uwell Caliburn & Caliburn KOKO),it still got fabulour flavor and do improvement a lot from Caliburn. It keeps all the pros from Caliburn, but how about cons? we will see!



Pros:
Easy to use design
Pod magnetises to the body
Rich flavor
Coil replaceable ( which is unavailable on Caliburn)
Airflow adjustable
Stylish appearance

Cons:
Still kind of small battery capacity with 0.8Ω coil.
(While with 1.0Ω or 1.2Ω coil which are under reaearch by Uwell now and will be released later, the battery should be more powerful than caliburn and can meet your daily needs better.)

The cap of cartridge is too tight to open.
(just like the caliburn. Uwell told ElegoMall that why they got this kind of tight design is just in order to keep this out of the reach of children. Well, that make sense.)

Learn More:
Uwell Caliburn G
Uwell Caliburn G review

Register now to get your new user coupon that worth $1,000 (wholesale only) and 20% OFF coupon for retail and then enjoy better price of more latest vape devices.

When vape shops hold sales events during holidays such as Halloween, we hope to help you get most important vape transactions. Now from 23.10 to 03.11, you can easily shop these Halloween vape offers through in Vapesourcing online store here: Vape Shop Online E-Cigarette & E-liquid Best For Sale

We will try to share you as many deals and sales as possible, and you can use the coupon code: HAS12 to get more discount. For the absolute latest sales, please check the Vapesourcing.com.

Related warehouses we recommend:
oversea warehouse for sale
europe warehouse for sale

Hey folks,

What is the great news today? Sourcemore brings you an excellent vape kit - VOOPOO V.THRU Pro Pod Kit

V.THRU Pro Kit is an easy-to-use and low-cost starter suit that has small size but large power. It is powered by 900mAh built-in battery capacity with type-c 5V/1A fast charging. With buttonless design, V.THRU Pro is easy for you to start, pick up and inhale. It comes with 3ml 0.7ohm and 1.2ohm dual V.THRU Pro Pods, which will provide you the fullest resolution and flavor. And the GENE Chip will bring a constant output voltage to give you a perfect flavor experience. 0.69 inch OLED screen shows you the information of device. It is also designed with intelligent child-proof mode to prevent children from accidentally starting. With the 360° fully-fit design, you will feel your flavor, not a pod. The magnetic suction and buckle design and super-easy groove clasp design, make it insert tight and pull out easily.

Would you like to enjoy vaping with this wonderful VOOPOO V.THRU Pro Pod Kit? Just join this game, you may catch an opportunity to win it. Lucky dog can be you!!!

To enter:
Play word chain: comment one word and the word should be related to vaping. One word per post and the word has to begin with the last letter of the previous word commented.

Example:
Sourcemore
Ejuice

If you draw a blank post like
'VOOPOO V.THRU Pro Pod Kit'
The next post will start with Letter 't'

Note:
1. Two winners will be picked by random.org on October 29, 2020.
2. You must be over 21.
3. Number your entry, for instance: #Post 1
4. Max 3 replies for each member
5. If a winner is unable to claim a prize due to unforeseen circumstances, we would choose another winner for the contest.

Prizes:


3*Vaporesso Luxe II 2 Kit

We'll have 3 Winners
.
Each winner gets 1pc of the prize.

All the entries are optional.

Ends Oct 29, 2020.

Luxe II Kit is an updated version of Vaporesso Luxe Kit, and consists of an 8ml NRG-S Tank and a 220W LUXE II Mod. It adopts IML panel, the high color saturation and transparency to bring you a visual feast and comfortable grip. As for the tank, it features 30mm in diameter, convenient and easy slide top filling design and coil replacement. In addition, it is compatible with GT mesh coils, which will bring you large and dense vapor. And the LUXE II Mod is driven by dual 18650 batteries and AXON Chip, breaking the using barrier for the entry-level users with a friendly operating system. There are 4 modes available: Pulse Mode, Power ECO Mode, Smart TC Mode and DIY Mode. The Pulse Mode can boost the inhalation every 0.02s to satisfy you with consistent performance. Plus, equipped with an upgraded user-friendly UI and the breath-taking 2.0-inch TFT color screen, LUXE II is designed for both functionality and visual esthetics. Moreover, there are multiple protections to guarantee your health and safety.


Sourcemore x Vaporesso Luxe II 2 Kit Giveaway, 3 Winners, Ends Oct 29, 2020

Enter here<<<Sourcemore & Vaporesso LUXE II Kit Giveaway

Trishul V2 Mech Mod is an updated version of Hellvape Trishul Mod. It features 27mm diameter tapers to 25mm. Adopting innovative, strong and stable magnet attraction button design, it is comfortable to use in a long term. Besides, it is powered by single 21700, 20700 or 18650 battery. And it includes the 18650 battery adapter. Moreover, it is designed with built-in Canted Coil Spring and large copper contact with mirror polishing craft for better conductivity.






Features:
27mm diameter tapers to 25mm
Accepts single 21700, 20700, or 18650 battery
18650 battery adapter included
Automatic floating battery adjustment by silicone ring
Innovative magnet attraction button design
Powerful N52 NdFeB black magnet
Switch with built-in Canted Coil Spring for better conductivity
Large copper contact with mirror polishing craft for better conductivity
...

Click here for more:

Hellvape Trishul V2 Mech Mod: Hellvape Trishul V2 Mech Mod