Official ProVari 3 Thread - P3

[Pinggolfer]

Kitty is officially Out Of Control

click
↓

​

Caveat: This was made for no reason other than to see if I could do it. Please refrain from speculating on a deeper meaning.

You made my day. I laughed and laughed. You're the best. I think everyone has a song which we can relate to. I got you babe was one of mine. It brings back memories of a girlfriend of mine. High school sweethearts.

 

[Bronze]

Totally confused as to how a dripper holds 2.5 ml of juice. Isn't that a tank?

Well, sorta and sorta not. A dripper the juice/vapor goes straight from the coil through the drip tip. A tank it it sorta goes through a chamber which often times is cooled by surrounding juice. The lines have been blurred though.

 

[rbrylawski]

Well, sorta and sorta not. A dripper the juice/vapor goes straight from the coil through the drip tip. A tank it it sorta goes through a chamber which often times is cooled by surrounding juice. The lines have been blurred though.

Well, that certainly cleared it all up.... Um, en Englais, S'il Vous Plais?

 

[rbrylawski]

I want to have some spare insulators for the KFL+ and Russian 91%. I found them at KidneyPuncher for a very reasonable price for a 4 pack of each. I doubt they're authentic replacement parts, but do I really need to spend the extra $$ for authentics? Do you guys have a recommendation? Just want to be prepared in case I ever need to replace the insulators on either device.

 

[AstroTurf]

RB, Just a pic or 2 for you...

 

[rbrylawski]

RB, Just a pic or 2 for you...

Very Cool Looking. I don't understand what I'm looking at in the top picture though? 4 coils?

 

[Pinggolfer]

Well, that certainly cleared it all up.... Um, en Englais, S'il Vous Plais?

What he said.

 

[AstroTurf]

Very Cool Looking. I don't understand what I'm looking at in the top picture though? 4 coils?

Goliath Dripper with 4 coils, capable of 8 coils though...

 

[rbrylawski]

Goliath Dripper with 4 coils, capable of 8 coils though...

UM......OMG, that would send my pea-sized brain into an induced coma! I'm lucky to be able to build 1 coil. This is certainly cool, but a bit out of Sir Rod's current league!

 

[Pinggolfer]

If one coil works well why do you need eight? Looks like a lot of work.

 

[AstroTurf]

Understood...

Perhaps mine as well.

But, I will try. Gotta Cloud Competition comin up afterall!!!

 

[AstroTurf]

If one coil works well why do you need eight? Looks like a lot of work.

8 times better!!!

 

[rbrylawski]

How many 186500 batteries does one of these puppies go through per hour??

 

[AstroTurf]

How many 186500 batteries does one of these puppies go through per hour??

In the pic it is sitting on a 26650 Mod.

But to answer, about 6?!? My best guess.

 

[rbrylawski]

OK......back to my Plebian question. Insulators for KFL+ and Russian 91%. Do any of you buy 'em? And if you do, where? I saw a 4 pack of center insulators and a 4 pack of deck insulators at KidneyPuncher for $4.95 each bag of 4. Would you buy them to have spares on hand?

 

[Siam Diesel]

I always buy spare parts...can never have too many. For that price, I'd tell you to go ahead and get them. KP is a good supplier.

One other thought...how do the KP prices compare with the same OEM replacement parts? If it's close, get the real ones (or both).


Sent from my P3 Ti...

 

[rbrylawski]

I always buy spare parts...can never have too many. For that price, I'd tell you to go ahead and get them. KP is a good supplier.

One other thought...how do the KP prices compare with the same OEM replacement parts? If it's close, get the real ones (or both).


Sent from my P3 Ti...

SvoeMesto charges $8.95 for one insulator, so these are by far a much better value. To get 4 center and deck insulators from SvoeMesto would cost $35.80. Or I can guy the KP parts for $9.90.

 

[Siam Diesel]

Get the KP parts...if you ever need 'em, they'll come in handy. And if the quality isn't up to snuff, it'll give you enough time to grab the real ones. Don't know about the o-rings in the Russian or the KFL+ but it's always handy to have a spare set of those, too (since you're ordering anyway).


Sent from my P3 Ti...

 

[Mowgli]

SvoeMesto charges $8.95 for one insulator, so these are by far a much better value. To get 4 center and deck insulators from SvoeMesto would cost $35.80. Or I can guy the KP parts for $9.90.

I learned that the "best" material for insulators is PEEK (tan) by watching the Subtank thread evolve.
Are the ones you found described as made out of PEEK?

 

[rbrylawski]

I learned that the "best" material for insulators is PEEK (tan) by watching the Subtank thread evolve.
Are the ones you found described as made out of PEEK?

KidneyPuncher doesn't say whether they are peek or not.