there was another shot of the 350j chip having it too, in the brotherhood
SXmini M Class (TEMP CONTROL)
- Thread starter whitewidows
- Start date
- th_trl_thread_readers 0
- Status
yeah just seen that myself 
looks like its coming in waves
English for the 350j chip owners
Chinese for the M class
would like to think the rest will be available today
looks like its coming in waves
English for the 350j chip owners
Chinese for the M class
would like to think the rest will be available today
Hopefully today
Last edited:
Lawdy Mercy
The Soze sightings are coming faster.....
Could it be that today indeed is Christmas at YiHi
or
Will the Grinch steal our Present yet again
Oh the excitement and anticipatory tension is thick as 100% PG Custard.
Stay tuned Friends.
The Soze sightings are coming faster.....
Could it be that today indeed is Christmas at YiHi
or
Will the Grinch steal our Present yet again
Oh the excitement and anticipatory tension is thick as 100% PG Custard.
Stay tuned Friends.
Wow, that min is the lowest on the market, should make even 317L usable in temp control.
Just updated mine to the Chinese firmware.
Dialed in 0.00091 for Stainless Steel since my uwell Crown 0.25ohm coil is running on 316L Stainless steel.
Temp at 500F.
I like it that upon locking resistance, you can even adjust the ambient temp.
Even in Chinese mode, the main screen stays pretty much the same.
Adjustment for ambient temp
Bypass mode.
Dialed in 0.00091 for Stainless Steel since my uwell Crown 0.25ohm coil is running on 316L Stainless steel.
Temp at 500F.
I like it that upon locking resistance, you can even adjust the ambient temp.
Even in Chinese mode, the main screen stays pretty much the same.
Adjustment for ambient temp
Bypass mode.
Unkamen has a "Pre-Order" going for SS 317L:
http://www.unkamensupplies.com/coll...ee-you-pick-gauge-24-26-28?variant=6503104769
30ft of 24ga or 35ft of 26ga or 40ft of 28ga for $7.46
http://www.unkamensupplies.com/coll...ee-you-pick-gauge-24-26-28?variant=6503104769
30ft of 24ga or 35ft of 26ga or 40ft of 28ga for $7.46
Not being argumentative,,, merely seeking education (as I are SS vaping ignernt); Why 430 over 317L?
Higher TCR yield better performance for our purposes possibly?
Last edited:
Higher TCR so more accurate, and more usable on more mods (317L will only really be usable on the 350J, since the DNA200, Dicodes, SXK, or Smok products don't support a TCR low enough).
Here is another link to the english version
https://www.dropbox.com/s/77rmmsj0o36ekmi/SXmini-M_V1_SXmini_Logo_75W_English_V2.32.rar?dl=0
https://www.dropbox.com/s/77rmmsj0o36ekmi/SXmini-M_V1_SXmini_Logo_75W_English_V2.32.rar?dl=0
Thanks for the confirmation Croak 
Knew if QM took that Position it had to be for good reason.
Per that, I will wait for 430 SS as well.
Knew if QM took that Position it had to be for good reason.Per that, I will wait for 430 SS as well.
OK english version is there. I have upgraded all SXM's. Now I'm a little confused. When I set it to Ti01 415F 16J set the resitstance it says temp compensate 25C. Is that where you leave it or how does that part work. I take it it is set automatically to that setting.
- Status
Similar threads
- Locked