Ok guys so my bad to keep taking up your time... I've been using the .5 ohm Kanthal coil and I started at about 20 watts and kept going up to and I am at about 30 watts. The problem is its not giving me that "hot" and "warm" throat hit I was getting when I was using the .4 ohm titanium coil.
Also, it makes a very short hiss sound after I vape, but only if I vape for more than a couple seconds?
The titanium dioxide Adam mentioned scared me so I will not be touching the titanium coil. Any suggestions, can I raise the watts a bit more? and/or would other level coils provide a warmer throat hit?..
Lastly, Adam mentioned the Kanthal, if it gets "too hot, will simply pop like someone cutting a wire," is this a sound or would I just get bad tasting vapes..meaning, how would I know?
Thank you guys and gals... I truly appreciate all the help.
Best Wishes...
The Short Hiss you hear is just the Coil Coiling down when you Release the Power Button. Think of it like turning Off the burner on an Electric Stove. It takes a little time for the Burner to Cool Off once the Power is cut.
---
You can Raise the Watts about as High as you like. Just go Slowly. If the Hit starts to Taste like Burnt Marshmallows, you have Reached the Limit to what the Wick/Coil can take. And going any Higher will just Ruin the Wick.
---
When a coil "Pops", you will Know it. Because no matter how Many times you push the Power Button, No Vapor will come out.
Popping a Coil is the Same thing as when a light bulb Burns Out. The Wire Inside Physically Breaks.