nimh

  1. XTAR-Justin

    X2/X4 Extended Version, AC & USB Input NiMH Li-ion Battery Charger

    Everyone always has a lot of rechargeable batteries, especially for flashlights. Therefore two or three different chargers must be prepared for each charge. Many people use AC port chargers because they feel that the voltage of the charger is sufficient and safe to charge. However, this charger...
  2. BillW50

    Energizer & Duracell NiMH BUSTED! (EEVblog #1200)

    Not many of us use NiMH cells in our mods (anymore?). But it is interesting that even Energizer & Duracell now engage in practices on the edge of shadiness. You pay extra money thinking you are buying a D cell. But in reality, you are really buying a C cell with a D size adapter. :(
  3. kaddigart

    4.8v Altoids (been done, I know) [my virgin] Mod

    I know tons of people have done these before, but it is my first mod so I felt obliged to plaster it to the interwebs. As you can see, it uses 4xAAA rechargeable 1.2v NiMh batteries (a la Puck) with two LEDs, one for powered on and the other for while puffing. Its a little rough but it...
  4. hmlessalky

    Radio Shack Ni-MH kit on clearance.

    Hey, I know there are some people who use Ni-MH batteries on mods, and when I was in RS today I found (and had to pick up) a 15 min charger with 4 AA and 4 AAA batteries on clearance for $19.67 before tax. Not sure if this is going on at other locations, but it might be worth a look. It is an...
  5. pnguin

    Soldering iron ecig mod

    Finally a use for that useless cold heat battery operated soldering iron that has been gathering dust on your work bench. Uses 4 aa nimh batteries for 4.8 volts, good for 2 days of vaping. With a 3 ohm carto it vapes like a charm. Please excuse the slow assembly in the how to video. I only had...
  6. Kahuna

    My new mod - The Golden Layalina

    I got some dual coil clear cartos and my MV 5v modbox with a standard 3amp regulator was being flakey with them (sometimes works fine, but most times the LED lights up a second and no joy). At 3.7v (in MV modbox w/ MOSFET) the dual coils fire up but the vapor is weak. So I wanted near 5v...
  7. ThePuck

    and now... The Puck... Cheap Parts and Easy

    I've been playing with mods for a while now and have hit upon the perfect combination. I have been using my prototype exlcusively for almost 7 months now. I vape nothing else and it is the same or better experience than smoking regualr cigs. Thanks to all of the modders here because I got...