If at first you do not succeed, get a bigger hammer.This might help you guys and gals out......
The stock straight tip does come off, use some pliers to lift the drip tip off slightly, then get a thin knife under it and lift it off..
You can then use any cleito style drip tip, it is a very tight fit but it does work ... I had to tap this on with a rubber mallet.
I bought a Clieto chuff cap from signature tips, looks so good !
IJoy Tornado Nano
- Thread starter jseah
- Start date
- th_trl_thread_readers 0
- Status
Thanks for the info and nice triade btwThis might help you guys and gals out......
The stock straight tip does come off, use some pliers to lift the drip tip off slightly, then get a thin knife under it and lift it off..
You can then use any cleito style drip tip, it is a very tight fit but it does work ... I had to tap this on with a rubber mallet.
I bought a Clieto chuff cap from signature tips, looks so good !
It's the next mod on my list
Did you make the skin pieces yourself or purchase it?
Last edited:
Ordered from zapwrapz UK skelleyThanks for the info and nice triade btw
It's the next mod on my list
Did you make the skin pieces yourself or purchase it?
Yeah it's a great mod !!
Fancy seeing you here
LOL, thinking about it I should of put some juice on it, bet it would of gone on easier, oh well...
i just got mine last night. it's working quite well. took a tank and a half of juice to bring out the flavor though. i was vaping Lost Art "?" juice and it's a tart/sour flavor with sweet creamy undertones. at first, i wasn't getting any tartness and was disappointed. about half way through my 2nd tank, it started to come out. at first i was pretty disappointed. but by the end of the night, i was satisfied. i have only used the stock .3ohm chip coil. i will try the RBA tonite.
I've seen some reviewers state that they needed to trim the wicks a little in the chip coil.
Has anyone done this yet? Maybe it also depends on the pg/vg ratio?
Thoughts?
Has anyone done this yet? Maybe it also depends on the pg/vg ratio?
Thoughts?
i have not seen that. but they may be true. during my break, i put a build on the RBA deck. i removed the chip coil i was using, and the wicks looked a bit dry and the tank was not empty. i did not get any dry hits, but about half of each wick was bone white. i was using a 30/70 pg/vg.
Last edited:
really? i tightened mine pretty darn tight using the geekvape T tool and they snugged up real nice without signs of stripping. did you use the included allan key? i never use those.
as far as extras, i don't know where you can get those man.
as far as extras, i don't know where you can get those man.
Yup, I used their Allen key. They stripped without any real effort, just using simple 316L wire. I'm using the grub screws used in the Boreas RTA, that also fit it. Those are much better. Now I just want some extras for backups lol.
got a custom drip tip made for the Cleito for my Tornano. it looks and feels very nice. got it from paxotic drip tips on ebay. he does nice work!
Almost done with my 10th tank of fluid on this tank. Those that say it will not leak have been lucky. If you wick it proper it does not leak but you do get condensation in the base and as said before just blow through the airhole and hold a paper towel or kleenex at the other side to catch it. I have used this tank even at 35w and it still works good. It says up to 300w but I can't imagine how hot of a vape that would be nor do I even want to experience my lungs being burnt like that. This is a very good RTA and building on the deck is easy. I just put in my 2nd set of coils for the last tank. The coils that came with it held up quite well and lasted longer than I expected. For $25 you can't go wrong with this tank even if it is just a backup tank.
I love my nano and I would love a new drip tip can someone explain how your swapping these and what size tip your using (is it a custom size or 510) etc looking very sickgot a custom drip tip made for the Cleito for my Tornano. it looks and feels very nice. got it from paxotic drip tips on ebay. he does nice work!
i just went to ebay looked for "paxotic drip tips" and he has "cleito style" drip tips... funny thing is they cost more than the nano lol... hope this helps...
tonyc
I use 3ohm chip coils with 90vg/10pg at 70-80 watts and I have to trim the wicks on all my chip coils by 3-4mm and recondition the cotton as they really compress it. Then again I chain vape the entire tank in 5-10 minutes. Might as well trim them as they don't leak if you cover the holes up again after snipping.
Heavens Gifts finally got the chuff caps, they have the ss & black. I ordered 2 & it shipped out within 24 hrs.
- Status
