All topcap assemblies are completed for run#9. Tomorrow, I will do the full-mod finish/detail shaping and then it's on to machining for set screws (bottom cap) and shaping the ends of the central bore (the "deltas", I call them).
I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves
- Thread starter pdib
- Start date
- th_trl_thread_readers 0
- Status
It's here!!
How do I put a battery in it? Yikes..I need help. Mr. P! Someone...
ETA: Never mind..blonde moment! I spoke with sedge..it has a battery in it. And now I know how to change it when the time comes.
And can I say....
WOW!!!!!!!!!!!!
How do I put a battery in it? Yikes..I need help. Mr. P! Someone...
ETA: Never mind..blonde moment! I spoke with sedge..it has a battery in it. And now I know how to change it when the time comes.
And can I say....
WOW!!!!!!!!!!!!
Last edited:
It's here!!
How do I put a battery in it? Yikes..I need help. Mr. P! Someone...
ETA: Never mind..blonde moment! I spoke with sedge..it has a battery in it. And now I know how to change it when the time comes.
And can I say....
WOW!!!!!!!!!!!!
I am in love with your beautiful Sumpin'. So glad to see you happy with it. Pics, please?
It's here!!
How do I put a battery in it? Yikes..I need help. Mr. P! Someone...
ETA: Never mind..blonde moment! I spoke with sedge..it has a battery in it. And now I know how to change it when the time comes.
And can I say....
WOW!!!!!!!!!!!!
You know the rules, pic's or it didn't happen!
Welcome fellow Dibi-dabbler!
Say, we're not really going to name the new mod "Humpin' " are we?
Doesn't seem like a very respectable name for such a work of art.
Dflingin'
Dflangin'
Dflickin'
Dibin'
Diblin'
Dablin'
Slim-Dibi
Doesn't seem like a very respectable name for such a work of art.
Dflingin'
Dflangin'
Dflickin'
Dibin'
Diblin'
Dablin'
Slim-Dibi
Last edited:
Wow I just gave my NUPPIN v1 a tune up with the new orings and grubs and OMG it's virtually leak free......... depending on the sqounk! Wow everything is perfect now...... Are these orings a bigger size..... Because, I don't remember it fitting together this well....... Even when I first started using it?
No more juice working it's way between the afc ring and the base down to the 510!!
No more juice working it's way between the afc ring and the base down to the 510!!
Ooo, I like DablinaSay, we're not really going to name the new mod "Humpin' " are we?
Doesn't seem like a very respectable name for such a work of art.
Dflingin'
Dflangin'
Dflickin'
Dibin'
Diblin'
Dablin'
Slim-Dibi
Ok, maybe not so much, dablina. I meant dablin. [emoji19]
I like Dat too though.
"Hope this works!"
Last edited:
Say, we're not really going to name the new mod "Humpin' " are we?
Doesn't seem like a very respectable name for such a work of art.
Dflingin'
Dflangin'
Dflickin'
Dibin'
Diblin'
Dablin'
Slim-Dibi
I dunno, it's kinda catchy
Thank you for the welcome.You know the rules, pic's or it didn't happen!
Welcome fellow Dibi-dabbler!
Pics will happen.It's been a rough day..I had a car accident last Thursday and the other party is lying.
But no matter..
It is all washing away, with this piece of art in my hand.
I have to say, I do love my mods now that I mostly squonk. And have gotten away from tube mods &tanks. No need to mention their origin.But this...this is pure class!
I absolutely love it.
Thank you so much..me too!!
I will take pics I promise. I will have to find just the right spot for a photo shoot. We are preparing to get a strong storm right now though, so it will have to wait.
congrats on the new mod and yeah, when it comes to accidents it's always the other guys fault even when it ain't the other guys fault and everyone tries to spin the story around to their favor. I own a body shop and man I'd say that according to my customers more than 90% of the time it's always the other guys fault 
popping in here to say first, I kinda like the new switch, maybe not in love with it as is yet but I see a lot of potential there. I think I would try to figure out a way though to positively lock it into the right orientation, like a notch or something, otherwise I see it turning sideways a bit to easy if only the atty is gholding it's clocked position. also just wanted to share that I've figured out a way to run a single coil in a nuppin and get just as good flavor as you would get with duals.
the reason why duals taste better is because of the chamber volume, it's not a tiny chamber like a chalice so a single coil winds up with too much dead air space in the chamber which dilutes/diminishes the flavor. one way is to use a chamber spacer, basically reducing the chamber volume, but this can be a pita in more ways than one. I found a better way to run a single without having the negative drawback of a large chamber and it vapes awesome even with a single like this
normally you would position the coil as close to the air inlet as practical, this is universally true of most any atty, but here with the nuppin what you can also do is, instead of positioning a single coil to one air inlet and keeping the other closed as you would normally think, what you can do instead is position the coil right at the drip tip inlet and leave both air inlets open. this completely negates the excess space in the chamber because the after coil airflow will never see it, the airflow from the coil is directly into the driptip with no turbulence of stagnant pockets between the coil and the driptip that a larger chamber normally creates. all of the extra volume in the chamber winds up being pre coil instead of post coil as it would be had you positioned the coil at the air inlet.
a little tricky and boring to try to explain all the physics involved but man you gotta try this... single coil tastes as sweet as it would in a chalice like this, you are pretty much removing the bulk of the chamber from the equation. I first stumbled onto this type of coil positioning with my chalice 2, it has a central coil mount and it is far from the air inlet which winds up adding a bit of throat hit and harshness even though the chamber is still pretty tiny, what I did was drill another air hole opposite the original, bringing air to both sides of the center coil which is right below the driptip and woh, totally different animal man. to date my best vape out of all my vapes has been this modded chalice 2 with dual air inlets to one central coil, but now, like this, the nuppin is right up there with that chalice. you gotta try this mang
popping in here to say first, I kinda like the new switch, maybe not in love with it as is yet but I see a lot of potential there. I think I would try to figure out a way though to positively lock it into the right orientation, like a notch or something, otherwise I see it turning sideways a bit to easy if only the atty is gholding it's clocked position. also just wanted to share that I've figured out a way to run a single coil in a nuppin and get just as good flavor as you would get with duals.
the reason why duals taste better is because of the chamber volume, it's not a tiny chamber like a chalice so a single coil winds up with too much dead air space in the chamber which dilutes/diminishes the flavor. one way is to use a chamber spacer, basically reducing the chamber volume, but this can be a pita in more ways than one. I found a better way to run a single without having the negative drawback of a large chamber and it vapes awesome even with a single like this
normally you would position the coil as close to the air inlet as practical, this is universally true of most any atty, but here with the nuppin what you can also do is, instead of positioning a single coil to one air inlet and keeping the other closed as you would normally think, what you can do instead is position the coil right at the drip tip inlet and leave both air inlets open. this completely negates the excess space in the chamber because the after coil airflow will never see it, the airflow from the coil is directly into the driptip with no turbulence of stagnant pockets between the coil and the driptip that a larger chamber normally creates. all of the extra volume in the chamber winds up being pre coil instead of post coil as it would be had you positioned the coil at the air inlet.
a little tricky and boring to try to explain all the physics involved but man you gotta try this... single coil tastes as sweet as it would in a chalice like this, you are pretty much removing the bulk of the chamber from the equation. I first stumbled onto this type of coil positioning with my chalice 2, it has a central coil mount and it is far from the air inlet which winds up adding a bit of throat hit and harshness even though the chamber is still pretty tiny, what I did was drill another air hole opposite the original, bringing air to both sides of the center coil which is right below the driptip and woh, totally different animal man. to date my best vape out of all my vapes has been this modded chalice 2 with dual air inlets to one central coil, but now, like this, the nuppin is right up there with that chalice. you gotta try this mang
great thinkin', T-cad! Way to work that peanut! I'm eager to hear what people think.
When me and VaHeli were first playing with these things, we both noticed that it made for a very nice vape to have both air inlets open, even tho a single coil was favoring one side. I moved to duals on it so quickly that I stopped experimenting with singles before long tho.
When me and VaHeli were first playing with these things, we both noticed that it made for a very nice vape to have both air inlets open, even tho a single coil was favoring one side. I moved to duals on it so quickly that I stopped experimenting with singles before long tho.
yeah, can't think of any other dripper atty that would allow positioning like this. you'd have to cut down the center post to almost the deck, which your atty already provides. this is pretty much what makes the kayfun type atties shine, your drawing air slipstreaming right around the whole coil and directly into the chimney(driptip in our case) with a very laminair flow from the coil, chamber only comes into play when it's in play, here it is not, the chamber itself could be 4" tall below this coil and it wouldn't matter as long as the coil is right at the bell mouth of the extraction point (driptip).
- Status
Similar threads
- Locked
