Now on p4u download page, just so you guys know. Saw it before work this morning didn't get a chance to try it yet.
Ipv4 upgrade available
- Thread starter tehmidcap
- Start date
- th_trl_thread_readers 0
- Status
I'm having trouble installing the sxi file, or is this file just the FW and I need another download to install it? Any tips?
You need this utility in conjuction with the .sxi file:
New SXi upgrate package_product upgrate_Download_IPV Electronic Cigarette -
New SXi upgrate package_product upgrate_Download_IPV Electronic Cigarette -
Thanks inswva! I still had trouble with the driver, had to choose to extract the files and point windows to them in the yihi program files directory. This seems to be a pretty rough cut, My .17 dual coil Ti build was burning @ 420f and 75J, feels better at 50J and 350f (it's way hotter than that if the Ni temps are to be believed). Still the most satisfying TC build yet for me. Probably just need more wraps for that extra power!
Yahoo!! got mine upgraded. granted I have no TI wire, and I normally dont vape above 70W, but now I can if I decide to! THanks for the heads up!
what do you mean in conjunction, so if I download this how do I do the upgrade? thru that?
Worked for me as well. Just a reminder for the less technologically advanced, like me, because I did not realize it for like 10 minutes: After downloading the SXI software, go to connection and download the drivers for your IPV4 before connecting it. If you don't, it won't let you install the download because it will not recognize that the device is there, even if your computer does.
I wonder if this changed the mapping for nickel at all (realizing that sounds silly). I noticed my Smok TCT nickel coils were performing a bit differently in Ni200 mode (not as good). They also refused to work in titanium mode unless I set the temp to like 570, then barely. I only tried this because someone with an IPV3 Li had mentioned their RDA (I think) with nickel was able to be run in titanium and take advantage of the extra 50 joules available. I also noticed that my Arctic nickel coils can take a bit more wattage in my DNA200 device so maybe its just the composition of the TCT coils.
I wonder if this changed the mapping for nickel at all (realizing that sounds silly). I noticed my Smok TCT nickel coils were performing a bit differently in Ni200 mode (not as good). They also refused to work in titanium mode unless I set the temp to like 570, then barely. I only tried this because someone with an IPV3 Li had mentioned their RDA (I think) with nickel was able to be run in titanium and take advantage of the extra 50 joules available. I also noticed that my Arctic nickel coils can take a bit more wattage in my DNA200 device so maybe its just the composition of the TCT coils.
Umm ... not exactly like this. Some folks are exploiting the 100J for Ni200, but not by vaping Ni200 in Ti mode. On the 3Li, they set their joules in Ti before switching to Ni200 mode where the Joules setting remains unchanged. But, they are moving back onto the Ni200 TCR mapping.
My memory settings in TL mode still don't save. Was this just for TI or was it supposed to fix that bug too?
The firmware says "TEST", this was just to expedite the new features to us because of all of the requests, I'm thinking there might be a more polished release down the road. This gave us the Ti TCR, 100J on Ti, and 120w in power mode.
ok- got the system off and the batteries pulled-now how do i upgrade my device? what do i need to connect this to the computer and then what do i do? please understand i have no computer skills and have no idea what you are talking about. what do i need to connect my ipv4 to the computer? what wire specifically because i don't seem to have the right equipment. any help would be greatly appreciated. thanks in advance........
You need a micro USB cable to connect the IPV4 to your computer. Here are the update instructions posted on Reddit-
1. Download the SXi update package here New SXi upgrate package_product upgrate_Download_IPV Electronic Cigarette -
2. Download the IPV4 Update here ipv4 upgrade software for 120w with Ti wire 100J test_product upgrate_Download_IPV Electronic Cigarette -
3. Install the SXi Program
4. Open said program
5. Turn off your IPV4, remove the batteries, and plug in the USB cord
6. Click the connection icon
7. Click install driver.
8. Install the driver for the IPV4 (should be the only option)
9. Close out of the driver pop up
10.Click connect
11.Click return (the icon at the top center of the window
12.Click open file
13.Browse to and open the IPV4 update package
14.Click Upgrade
in a miracle of sorts, i actually got the upgrade installed- thank you HighPlains for a first for me. i enjoy belonging to a forum where so many are willing to help fellow vapers. now if you could only do my taxes........
- Status
Similar threads
