New Products 04/19/2012
I have some excellent Xtar chargers below and from what I have been told, these are one of the best to have.
Safe Battery Charging Bags
Safe Battery Charging Bag
My Note: I am really happy to bring this to my store, I URGE you, if you are a modder or have a lot of batteries you are always charging.. get this. Charger the batteries in this bag and if something does happen, it is safely contained in the bag!
Note: this isn't a guaranty that nothing will happen, just an added layer of safety.
Have you heard about battery explosions? Worried? Need a little extra piece of mind?
If you want to avoid potential battery charging issues, this is the solution.
Safe Bags will give you peace of mind.
The Safe Battery Charging Bag is a high tech bag made of specific materials that will contain a lithium battery fire. Place your lithium battery inside the Safe Charging Bag and extend the charging wires through the top flap. Charge the batteries in the bag for peace of mind and a higher level of safety. In the event of a lithium battery mishap, the Safe Charging Bag's fire-resistant material reduces the severity of the fire inside and vents the smoke outside the Safe Bag. The Charging Bag is sealed with a thick, industrial strength Velcro flap and can also be used for safe transportation and storage of your lithium polymer batteries.
Before using the Safe Bag,.you must read and understand the Lipo.Safe Safety Instructions.
We assume absolutely no liability for any damages of any kind-even with proper use. This is an added layer of protection, not a guaranty.
When using the Safe, you must always remember to abide by safe battery charging and safety rules and never leave charging batteries unattended. Never leave damaged batteries unattended. Always use this bag on a non-flammable surface and in a ventilated area. Do not use the bag if it has been damaged..
PRECAUTIONS
1. Ensure that charger rate is properly set and polarity is correct.
2. Attach charging leads to battery.
3. Place battery in Lipo Safe towards the bottom.
4. Place Lipo Safe on non-flammable surface.
5. Route charge leads through vent at the top seam of the Lipo safe.
6. Close top flap of Lipo Safe land press Velcro until fully closed.
7. Charge battery using proper charging practices.
8. Always practice extreme caution when charging and never leave a charging battery unattended.
____________________________________________________________
XTAR WP6 II 6 X
XTAR WP6 II 6 X
6 Channels 14650/17670/18650/18700.
My Note:
WOW, love this thing, had several batteries fully charged on my cheapo chargers and this unit told me they were not at capacity and continued to charge them, 10 minutes later and the light went green. I have been trying to find a good solution to bring to DV now that I've branched out into VV and batteries and this is an excellent charger, so if you have several batteries you are charging all the time.. this is a good buy!
Specifications:
1. Six independent charging channels
2. Three modes charging method
3. 14650/17670/18650/18700 battery
Six independent charging channels for 14650/17670/18650/18700 battery.
Three-mode charging system (TC/CC/CV).
Real-time battery monitoring system.
IC temperature monitoring system.
Input DC 12V 2A.
Constant charge current 600mA ± 10%.
Constant charge voltage 4.2V ± 1%.
Adaptor input 110V~240V AC 50/60Hz.
Adaptor output DC 12V 2000mA.
Operation temperature 0°C~40°C.
____________________________________________________________
Xtar WP2 II Charger
Xtar WP2 II Charger
Product Features:
Undervoltage lockout system;
Two-modes ( CC.CV ) charging system;
Reverse-polarity protection circuit board;
Under voltage disconnecting technology.
Specifications:
Operation Temperature: Room temperature 0~40°C;
Input AC: 12V DC 650mA;
Rated Voltage: 4.2V;
Constant Charge Current: 600mA±10%;
Constant Charge Voltage: 4.2V±1%;
Cut-Off Current: 60mA±10%.
____________________________________________________________
Xtar MP2 dual channel / Dual Voltage Charger
Xtar MP2 dual channel / Dual Voltage Charger
The charger has a switch that can select between 3.0v and 3.7v volt.
The charger has a small led for each channel, this led will be red when batteries are charging and green when full charge is reached.
The charger is supplied with two spacers, making it possible to charger smaller CR2 /15270 cells
(Remember: only charge cells that can take a 250 mA charge current)
* 16340/123A/18350
* LifePo4 3.0v and 3.7v Li-ion battery charging.
* With spacers (included), can charge 15270/CR2 3v and 3.7v.
* Standard USB charging interface.
* CC/CV charging system, real-time battery monitoring system.
* IC temperature monitoring system.
* High and low voltage separated charging system.
* Input: DC 5V 250mA * Output: DC 3.7V/4.2V 250mA
* Constant charge current: 250mA± 10% * Constant charge voltage: 3.7V/4.2V± 1%
* Operation temperature: 0° C~40° C * Car Adaptor output: DC 5V
* Weight: 125/140g
* Packing sizes: 15.5 CM X 12.8 CM X 5.3 CM
* Include: charger, USB cable, adaptor, 2pcs connector
* Dimensions (LxWxH) 50mm x 69mm x 30mm
____________________________________________________________
Soshine S1-mix V3.0 Rapid Charger
Soshine S1-mix New V3.0 Rapid Charger For 14500/18650/17500 Rechargeable Battery
Charger Specification:
- Input: DC 12V 1.5A(min)
- Output: 4.2V
- Channel: Ⅰ-500mA,Ⅱ-500mA,Ⅲ-1000mA,Ⅳ-1000mA
Features:
- End-of-charge voltage detection assures the safe and full charge any time.
- Short-circuit protection
- Over voltage cut-off protection - prevents damage to your battery
- Complete individual channels - convenience;prevent batteries charge each other.
- charge method : MCU - charge battery fully and quickly.
- Reverse polarity protection - prevent damage to your battery and charge.
- Temperature control - temperature>60 degree, the power cut down.
- Battery reset make short circuit protection battery to reset
4 LED indicators:
- Red on - battery charging
- Green flash - charge 80%-90% complete
- Green on - charge 90%-100% complete
- Turn off - stand by without battery in compartment
- Loose connections(replace battery)
- Polarity reversed(load the battery into charger in right side)
- Low voltage less than 0.5V
- Red to green flash - Non rechargeable
Channel: ⅠⅡ 17335J/P,.16340J/P,.15266J/P,.14500,.14430,.14250, 10440
Channel: Ⅲ Ⅳ 18650,.18500,.17670,.17500
Gross weight: 435g
Package includes
1 x package
1 x Adaptor(round)
1 x Car Adaptor
____________________________________________________________
P2600 Solar Charger
P2600 Solar Charger
My Note: Yea baby, now I have an on the go option to recharge my PV, you can charge this via wall socket, then take it with you camping, boating whatever and charge your PV, all the while recharging the charger with the power of the sun.
Go GREEN Save the planet
Keep this in your pocket and never run out of power. .
Has an internal battery that can be used at any time to charge your PV via USB and can recharge the unit via solar..
You can also charge other USB devices, phones, MP3's etc.
1. Using high-efficiency monocrystalline silicon, solar energy conversion efficiency over than 16%
2. Solar panel 5V 70mA
3. Capacity of battery 2600MAH
4. Output volt 5.5V
5. Output current 300-550mA
6. Charging time for the lithium polymer battery inside using USB charging cablel 5 hours
7. Charging time for the lithium polymer battery inside using the solar panel 10-15 hours
Main commponents:
1. Solar charger 1 PC
2. Output cable 1PC
3. Mobile phone connectors 5PCS
4. Input cable 1PC USB switch to DC 3511
5. AC adapter 1 PC
6. Instruction book
______________________________________________________
And finally a cool gadget:
5 in 1 Laser Pointer with Pen and Key Chain
5 in 1 Laser Pointer with Pen and Key Chain
Comes in BLACK, MAROON, GREEN AND SILVER
1. Wavelength: 650nm
2. Size: 1.5 x 8cm / 0.6 x 3.15in (Dia. x L)
3. Material: Aluminium alloy
Dual Lights, laser, Pen and keychain!